Introduce TRACEABLE DUCT RODDER containing metal lines, can be used to detect equipment easily detect the direction of the pipeline, as well as the location of the TRACEABLE DUCT RODDER . We can generate the TRACEABLE DUCT RODDER has two kinds, one is to be able to carry the monitoring function, one kind is the individual tracking function. The difference between the two is that with a probe into the function of a video wire inside, and a power cable, you can head the head to install the head, in order to view the situation in the pipeline. A bare copper wire can be used to locate and track the position of the TRACEABLE DUCT RODDER in a single probe function. The traceable duct rodders are available in 8mm-16mm diameter. Detectable duct rods are used to find, follow and accuratelymap the duct route without digging or trenching. The traceable duct rod is used in conjunction with both a signal transmitter and a receiver. The easily identifiable signal is transmitted along the entire length of the duct rod. The traceable duct rod has an 18 AWG copper wire, almost twice the size of the competition, in the center of the fiberglass core. The copper wire is also connected to the end fittings so the transmitter leads canmake a direct connection to the copper wire. The female end fitting provides the attachment point for the transmitter's lead connection. The other transmitter lead is connected to a stake driven into the earth. The direct connection of the signal to the copper wire provides themost effectivemethod of signal transmission.
Introduce TRACEABLE DUCT RODDER containing metal lines, can be used to detect equipment easily detect the direction of the pipeline, as well as the location of the TRACEABLE DUCT RODDER . We can generate the TRACEABLE DUCT RODDER has two kinds, one is to be able to carry the monitoring function, one kind is the individual tracking function. The difference between the two is that with a probe into the function of a video wire inside, and a power cable, you can head the head to install the head, in order to view the situation in the pipeline. A bare copper wire can be used to locate and track the position of the TRACEABLE DUCT RODDER in a single probe function. The traceable duct rodders are available in 8mm-16mm diameter. Detectable duct rods are used to find, follow and accuratelymap the duct route without digging or trenching. The traceable duct rod is used in conjunction with both a signal transmitter and a receiver. The easily identifiable signal is transmitted along the entire length of the duct rod. The traceable duct rod has an 18 AWG copper wire, almost twice the size of the competition, in the center of the fiberglass core. The copper wire is also connected to the end fittings so the transmitter leads canmake a direct connection to the copper wire. The female end fitting provides the attachment point for the transmitter's lead connection. The other transmitter lead is connected to a stake driven into the earth. The direct connection of the signal to the copper wire provides themost effectivemethod of signal transmission .
1 all types of lv power cables , telecommunication cables , special cables. 2 rod copper wire 8 mm 3 pvc compounds.
Copper wire rod 8mm.Manufacture fro copper wire rod 8mm
Aluminium ( ingots, t bars, sows, rods), copper (cathodes, cakes, billets, ingots, rods), lead (ingots), nickel (cathodes both cut and uncut briquettes, pellets, discs, etc.), tin (ingots, etc.), zinc (ingots both regular size and jumbos), steel billets (all types including crc, hrc, hdgc, plates, sheets), concentrates and ores for above items including bauxite, manganese, clinker and iron ores etc), scraps of above items including hms 1&2 and steel scraps.
Standard ASTM B166 / ASME SB166 Dimensions ASTM, ASME and API Round Bars Size 10 mm To 100 mm Dia in 100 mm TO 6000 mm Length. Round bar Diameter 3-~800mm Hex Bar size 2-100mm A/F Square bar size 4 to 100mm Flat bar Thickness 2 -100mm Flat bar Width 10 to 500mm Length 3 to 6 meter, Custom Cut Lengths Form Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wiremesh, Billet, Ingot, Forging Etc.,
Standard ASTM B160 / ASME SB160 Dimensions ASTM, ASME and API Round Bars Size 10 mm To 100 mm Dia in 100 mm TO 6000 mm Length. Round bar Diameter 3-~800mm Hex Bar size 2-100mm A/F Square bar size 4 to 100mm Flat bar Thickness 2 -100mm Flat bar Width 10 to 500mm Length 3 to 6 meter, Custom Cut Lengths Form Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wiremesh, Billet, Ingot, Forging Etc.,
Standard ASTM A479 / ASME SA479 Dimensions EN, DIN, JIS, ASTM, BS, ASME, AISI Round Bars Outside Diameter in the range of 4mm to 500mm Bright Bars Outside Diameter in the range of 4mm to 100mm Hex Bars 18mm â?? 57mm (11/16â?³ to 2-3/4â?³) Square Bars 18mm â?? 47mm (11/16â?³ to 1-3/4â?³) Flat Bars 1/2â?? to 10â?? in thickness range of 2mm to 150mm Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish Length 1 to 6 Meters, Custom Cut Lengths Form Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.
Standard ASTM A276 / ASME SA276 Dimensions EN, DIN, JIS, ASTM, BS, ASME, AISI Round Bars Outside Diameter in the range of 4mm to 500mm Bright Bars Outside Diameter in the range of 4mm to 100mm Hex Bars 18mm â?? 57mm (11/16â?³ to 2-3/4â?³) Square Bars 18mm â?? 47mm (11/16â?³ to 1-3/4â?³) Flat Bars 1/2â?? to 10â?? in thickness range of 2mm to 150mm Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish Length 1 to 6 Meters, Custom Cut Lengths Form Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.
Copper is found in natural ore deposits around the world. The most abundant ore are chalcopyrite and bornite, which contain both copper and iron sulphides. These account for about 80% of the worlds known ores. We supply ores with copper content within fairly narrow ranges of specifications to satisfy our customer needs
The range comprising the finest Copper Metal Products, Lead Sheets, and Copper Long Rod, has a high demand in the market. the best services in the entire Non-Ferrous Metal Industries. Since 1982, we are serving the Nation as the specialist of being the manufacturers as well as the dealers in Non-Ferrous Metal Industries with a good experience and reliability. This ensures the products sturdiness, durability, and resistance to corrosion. In addition to this, the offered range is known to be marked at the most reasonable rate possible.
Rod like copper and aluminium, brass and ss, wpc floorings, ceiling ,bamboo,thachy ,led lights, smart homes.Trader
**technical specification: 1) thickness of the copper layer is more than 0.254mm(all can be done to your demand) 2) the core steel rod shall have a tensile strength of not less than 580nm/mm2. 3) the steel core is low carbon steel, and the carbon content is about 0.15%. 4) the purity of the copper using as cladding shall be 99.9% pure copper. 5) the copper ground rod will be capable of being through 90 at a maximum radius if 100mm with no copper fracture and with no ill effect on the bond between the steel and the copper cladding. 6) good in anticorrosion that usage-life is more than 50 years or more, constant low resistance and good plasticity which had the characteristics of copper as well as steel Seaworthy exportation packaging
Made from acme quality steel, Stainless Steel Bright Bars are used in diverse industrial applications. Steel Round Bright Bar is appreciated for its chief attributes such as rust resistance and long life. We are acknowledged as one of the topmost SS Bright Bars Manufacturers from India. Stainless Steel Bright Bars can be obtained at cost effective prices Grades Austenitic Steel:301, 304, 304H, 304L, 310, 310S, 316, 316L, 317, 317L, 321, 347 Ferritic Steel:409, 409M, 410s, 420, 430 Martensitic Steel: 410, 416, 420, 431 Specification Finishes:Black, Bright, Matt Form: Round, Square, Hex
Petrochemical, copper wire rod, iron ore pellets.Trading
Length: As Required Cu (Min): 99.9% Alloy Or Not: Non-Alloy Ultimate Strength ( MPa): 205 Elongation ( %): 45% Wall Thickness: 0.2mm~910mm Outside Diameter: 2mm*4mm~1016mm*1219mm Processing Service: Bending, Punching, Cutting Standard: JIS ASTM DIN EN ISO Material: C10200/C11000/C12000/C12200/TU1/TU2/T2/custom Surface: Polished Feature: High Strength Technique: Cold Rolled Hot Rolled Size: Custom Size