Features Compliant with sfp msa standard Compliant with ieee 802.3z 3.3v dc power supply 1310nm, fp ld, 1250mbps, 10km Difference lvpecl inputs and outputs Duplex lc connector Compliant with sff-8472 Hot pluggable Rohs compliant Applications Gigabit ethernet data link Data storage networks Other optical links Optical access network Remarks: Compatible with cisco / hp / huawei / nortel / 3com/foundry/alcatel-lucent / extreme/d-link. 3 years warranty
Features Support 1000base-t operation in host systems with sgmii interface Up to 1.25gbps bi-direction data links Hot-pluggable sfp footprint Fully metallic enclosure for low emi Compact rj-45 connector assembly 100m transmission over unshielded twisted pair(utp) category 5 cable Temperature range 0 to 70ípc Rohs compliant Remarks: Compatible with cisco / hp / huawei / nortel / 3com/foundry/alcatel-lucent / extreme/d-link. 3 years warranty
Features Compliant with sfp msa standard Compliant with ieee 802.3z 3.3v dc power supply 850nm, vcsel, 1250mbps, 550m Difference lvpecl inputs and outputs Duplex lc connector Compliant with sff-8472 Hot pluggable Rohs compliant Applications Gigabit ethernet data link Data storage networks Other optical links Optical access network Remarks: Compatible to cisco / hp / huawei / nortel / 3com/foundry/alcatel-lucent / extreme/d-link. 3 years warranty
Multi-sourced SFP package with dual LC/PC receptacles; Single mode dual fibers transmission Up to 20Km with 9/125μm SMF; AC coupled for Rx and Tx side Two temperature ranges: 0°C to +70°C for commercial level, -40°C to +85°C for industrial level; operates at data rate 155Mbps; Complies with MIL-STD-883/GR-468 Complies with lots of brands of switch such as cisco h3câ?¦â?¦. Can be with or without DDM
Centrifugal Water Pumpset Centrifugal Water Pump direct coupled with flexible rubber coupling to I/C Diesel Engine & mounted on cast iron base frame. Pump Size : 2"x2" to 6"x6" Engine : 3.5 HP to 25 HP Export worthy wooden packing
GLSUN SFP-25G-CWDM-1270-10-T02, CWDM 25.78Gbps SFP28 transceiver is designed for use in 25Gb/s data rate over single-mode fiber for link length 10Km. The transceiver designs are optimized for high performance and cost effective to supply customers the best solutions for 25Gb/s single lane optical links. Compatible Cisco Form Factor SFP28 Max Data Rate 25.78Gb/s Wavelength 1270nm~1370nm Max Cable Distance 10km Connector Duplex LC Transmitter Type DFB CWDM Extinction Ratio 3.5dB Media SMF Power Consumption
Glsun SFP28-25G-BX10U DFB 25.78Gbps SFP28 BiDi transceiver module is designed for use in 25Gb/s data rate over single-mode fiber for link length 10Km. The transceiver designs are optimized for high perform-ance and cost effective to supply customers the best solutions for 25Gb/s single lane optical links. Compatible Cisco Form Factor SFP28 Max Data Rate 25.78Gbps Wavelength TX1270nm/RX1330nm Max Cable Distance 10km Connector Simplex LC Transmitter Type DFB BiDi Extinction Ratio 3.5dB Media SMF Power Consumption
Glsun SFP28-25G-BX10D DFB 25.78Gbps SFP28 BiDi transceiver module is designed for use in 25Gb/s data rate over single-mode fiber for link length 10Km. The transceiver designs are optimized for high perform-ance and cost effective to supply customers the best solutions for 25Gb/s single lane optical links. Compatible Cisco Form Factor SFP28 Max Data Rate 25.78Gbps Wavelength TX1330nm/RX1270nm Max Cable Distance 10Km Connector Simplex LC Transmitter Type DFB BiDi Extinction Ratio 3.5dB Media SMF Power Consumption
GLsun SFP28-25G-LR single-mode transceiver is SFP28 transceiver module duplex optical data communications support up to 25.78Gb/s. It is with the SFP+ 20 pins connector to allow hot plug capability. Digital diagnostic functions are available via an I2C. It has built-in clock data recovery (CDR). This module is designed for single-mode fiber and operates at a nominal wavelength of 1310nm. Compatible Cisco Form Factor SFP28 Max Data Rate 25.78Gbps Wavelength 1310nm Max Cable Distance 10km on 9/125um SMF Connector Duplex LC Transmitter Type DFB 1310nm Extinction Ratio 3.5dB Media SMF Power Consumption
Features Single lc/sc receptacle optical interface compliant Hot-pluggable sfp footprint 1490/1550nm distributed feed back laser transmitter Rohs compliant and lead free Up to 10~20 km on 9/125 Metal enclosure for lower emi Single 3.3v power supply Low power dissipation Commercial operating temperature range: 0ípc to 70ípc Applications 1.25gb/s 1000base-lx ethernet 1.06 gb/s fibre channel Marks: compatible with cisco / hp / huawei / nortel / 3com/foundry/alcatel-lucent / extreme/d-link. 3 years warranty
Model: 1000base-sx 1) category: gbic 2) speed: 1.25gb 3) wavelength: 850n.M multi-mode 4) interface types: sc 5) transmission distance: 550m 6) compatibility: automatically compatible with switches, 3com, extreme, Fouday, avava, hp, mortel, enterasys, and riverstone 7) parallelism: ftr-8519-3d, j4131b, gpim-01 Model: 1000base-lx 1) category: gbic 2) speed: 1.25gb 3) wavelength: 1, 310n.M, single-mode 4) interface types: sc 5) transmission distance: 10km / 20km 6) compatibility: automatically compatible with switches, 3com, extreme, Fouday, avava, hp, mortel, enterasys, and riverstone 7) parallelism: ftr-8519-3d, ftr-1319-3d, j4132a Model: 1000base-zx, 1000base-ezx 1) category: gbic 2) speed; 1.25gb 3) wavelength: 1, 550n.M, single-mode 4) interface types: sc 5) transmission distance: 80km / 120km 6) interface types: sc 7) compatibility: automatically compatible with switches, cisco, 3com, Extreme, fouday, avava, hp, mortel, enterasys, and riverstone 8) parallelism: ftr-1519-3d, gpic-08
Product Name: Clopidogrel Bisulphate Form I Form II 120202-66-6 PLAVIX Synonyms: PLAVIX;SR-25990C;CLOPIDOGREL BISULPHATE;CLOPIDOGREL HYDROGEN SULPHATE;CLOPIDOGREL SULPHATE;SR-25990C, Plavix, Methyl (+)-(S)-a-(2-Chlorophenyl)-6,7-dihydrothieno[3,2-c]pyridine-5(4H)acetate, Hydrogen sulfate salt;Methyl (S)-alpha-(2-Chlorophenyl)-6,7-dihydrothieno[3,2-c]pyridine-5(4H)-acetate hydrogen sulfate;SR-25990, Methyl (2-chlorophenyl)(6,7-dihydro-4H-thieno[3,2-c]pyridin-5-yl)acetate hydrogen sulfate Used for: Antithrombotic CAS No.: 120202-66-6 Molecular Formula: C16H16ClNO2S.H2O4S Formula Weight:419.9 Molecular structure: Assay: 98%min Packaging and storage: Preserve in well-closed containers, and store at controlled room temperature. Standard: USP, CP Docs: GMP.
Features Support USB3.0 Support 20MHz/40MHz/80MHz frequency 5G compatible with IEEE 802.11ac and IEEE 802.11a standard 2.4G compatible with IEEE 802.11n, IEEE 802.11g, IEEE 802.11g standard Detect the network and change transmit speed automatically Support WPA/WPA2/WPA-WPA2/802.1x and 64/128 bit WEP encryption Support WPS 2.0 Internal Omni-directional Antenna Support 2.4G and 5G dual band Support Wi-Fi Direct Support Multiple BSSID Support QoS-WMM, WMM-PS Support WPS: PIN, PBC Support Infrastructure mode, Ad-Hoc mode and Soft AP three modes Support Cisco CCX Low consumption management Supported OS: Window XP/Vista/Win7/Win8/Win8.1/Mac OS 10.10/Linux v3.0.0.1
Features Support USB3.0 Support 20MHz/40MHz/80MHz frequency 5G compatible with IEEE 802.11ac and IEEE 802.11a standard 2.4G compatible with IEEE 802.11n, IEEE 802.11g, IEEE 802.11g standard Detect the network and change transmit speed automatically Support WPA/WPA2/WPA-WPA2/802.1x and 64/128 bit WEP encryption Support WPS 2.0 Internal Omni-directional Antenna Support 2.4G and 5G dual band Support Wi-Fi Direct Support Multiple BSSID Support QoS-WMM, WMM-PS Support WPS: PIN, PBC Support Infrastructure mode, Ad-Hoc mode and Soft AP three modes Support Cisco CCX Low consumption management Supported OS: Window XP/Vista/Win7/Win8/Win8.1/Mac OS 10.10/Linux v3.0.0.1
MKP interference suppression X2 capacitor EMI filters X2-MKP are non-inductively wound with metallized polypropylene film as dielectric and electrode, with copper-clad steel leads, encapsulated in solvent-resistant and self-extinguishing UL94 V0 thermoplastic case, with epoxy resin sealed. They provide interference suppression with safety approvals. They are Suitable for across the line capacitors, EMI filters, Spark killer circuits, etc. Features: Self-healing properties High moisture resistance Overvoltage stress withstanding Flame-retardant plastic case and epoxy resin Specifications: Operating temperature: -40 -- +100C Capacitance range:Capacitance range: Capacitance tolerance: 10%(K) Rated voltage:275VAC (50Hz/ 60Hz) Dissipation factr:0.1% max. at 1KHz, 25C Insulation resistance:15,000 MOhm min. for Q0.33UF 5,000 MOhm*uF/C min. for C>0.33uF Dielectric strength: 1200VDC for 60 sec. or 2000VDC for 1 sec.
We are an independent distributor and wholesales dealer for network devices, such as, Cisco, Nortel, 3COM, IBM, HP. Brand New - Full Warranty - Lowest Price for all the products. CISCO861-K9 Cisco 861 Ethernet Security Router We also have the following products for sale: WS-C2960S-24PD-L C3K-NM-10G WS-C3750X-24S-S WS-C3750E-24PD-S/E WS-C3560G-24TS-S WS-C3560X-24T-S WS-C3750V2-24PS-S CISCO1921/K9 CISCO2921-SEC/K9 WS-X4648-RJ45V+E VWIC2-4FXO ASA5520-BUN-K9 AIR-CT5508-250-K9 AIR-WLC2112-K9 Packaging & Shipment Details: Packaging Detail :Sealed Delivery Time :1-2 Days Supplying Ability:1000 Unit per Week Place of Origin :Malaysia or HK Minimum Order & Payment: Minimum Order Quantity:1 Unit FOB Price (USD) :Negotiable Payment Type :T/T Pypal Western Union L/C. Packaging detail :sealed.
We are an independent distributor and wholesales dealer for network devices, such as, Cisco, Nortel, 3COM, IBM, HP. Brand New - Full Warranty - Lowest Price for all the products. CISCO2911-V/K9 Cisco 2911 UC Bundle, PVDM3-16, UC License PAK We also have the following products for sale: WS-C2960S-24PD-L C3K-NM-10G WS-C3750X-24S-S WS-C3750E-24PD-S/E WS-C3560G-24TS-S WS-C3560X-24T-S WS-C3750V2-24PS-S CISCO1921/K9 CISCO2921-SEC/K9 WS-X4648-RJ45V+E VWIC2-4FXO ASA5520-BUN-K9 AIR-CT5508-250-K9 AIR-WLC2112-K9 Packaging & Shipment Details: Packaging Detail :Sealed Delivery Time :1-2 Days Supplying Ability:1000 Unit per Week Place of Origin :Malaysia or HK Minimum Order & Payment: Minimum Order Quantity:1 Unit FOB Price (USD) :Negotiable Payment Type :T/T Pypal Western Union L/C. Packaging detail : sealed.
Features - Transmission data rate up to 25.78Gbps - 850nm VCSEL laser - PIN photo-detector - Internal CDR on both transmitter and receiver channels - Low power consumption < 1W - Hot-pluggable SFP28 form factor - Up to 70m on OM3 MMF and 100m on OM4 MMF - Digital diagnostics functions are available (optional) - Operating case temperature range 0�°C to +70�°C - 3.3V power supply voltage - RoHS-6 compliant Applications - IEEE 802.3by 25GBASE-SR
10g xenpak transceiver Description: Poflink's xenpak is a standardized form factor for 10 gb/s fiber optic transponders that is used for data transfer rates from 10.3 gb/s to 10.5 gb/s. It is protocol-specific: either 10g ethernet or 10g fibre channel versions are available. Xenpak transponders are used in datacom optical links only (not telecom). Its electrical interface to the host board is also standardized and is called xaui (4 x 3.125 gb/s). Poflink offers the whole series of 10g xenpak, including: Xenpak 10gbase-sr 300m (mmf om3); Xenpak 10gbase-lr smf 10-20km; Xenpak 10gbase-er smf 40km; Xenpak 10gbase-zr smf 80km Features: Hot pluggable x2 msa form factor Low total power consumption Rohs-6 compliant (lead-free) Temperature range 0¡ãc to 70¡ãc Transmission distance 300m, 10km, 40km, 80 km Cooled 1550nm eml or uncooled directly modulated distributed feedback (dfb) Sc connector, single mode fiber Full duplex transmission mode Digital optics monitoring (dom) Power supply: +5.0 v, +3.3 v Xaui electrical interface 4 x 3.125 gb/s ethernet(ftlx1841e2) Management and control via mdio 2-wire bus De-latch mechanism with low extraction force Application: Xenpak 10gbase-sr 300m (smf om3); Xenpak 10gbase-lrm mmf 220m; Xenpak 10gbase-lr smf 10-20km; Xenpak 10gbase-er smf 40km; Xenpak 10gbase-zr smf 80km 1pcs/plastic box 0.2kg/pcs
10g xenpak transceiver Description: Poflink's xenpak is a standardized form factor for 10 gb/s fiber optic transponders that is used for data transfer rates from 10.3 gb/s to 10.5 gb/s. It is protocol-specific: either 10g ethernet or 10g fibre channel versions are available. Xenpak transponders are used in datacom optical links only (not telecom). Its electrical interface to the host board is also standardized and is called xaui (4 x 3.125 gb/s). Poflink offers the whole series of 10g xenpak, including: Xenpak 10gbase-sr 300m (mmf om3); Xenpak 10gbase-lr smf 10-20km; Xenpak 10gbase-er smf 40km; Xenpak 10gbase-zr smf 80km Features: Hot pluggable x2 msa form factor Low total power consumption Rohs-6 compliant (lead-free) Temperature range 0¡ãc to 70¡ãc Transmission distance 300m, 10km, 40km, 80 km Cooled 1550nm eml or uncooled directly modulated distributed feedback (dfb) Sc connector, single mode fiber Full duplex transmission mode Digital optics monitoring (dom) Power supply: +5.0 v, +3.3 v Xaui electrical interface 4 x 3.125 gb/s ethernet(ftlx1841e2) Management and control via mdio 2-wire bus De-latch mechanism with low extraction force Application: Xenpak 10gbase-sr 300m (smf om3); Xenpak 10gbase-lrm mmf 220m; Xenpak 10gbase-lr smf 10-20km; Xenpak 10gbase-er smf 40km; Xenpak 10gbase-zr smf 80km 1pcs/plastic box 0.2kg/pcs
