Gbic Module

100% CISCO CWDM-SFP10G-1470 COMPATIBLE SFP TRANSCEIVER:Compatible for Cisco CWDM-SFP10G-1470, wavelength: 1470nm, the transmission distance up to 40km. TECHNICAL SPECS: 10Gb/s data rate, duplex LC connector, cable type: SMF, working temperature: -5 ~ +70, Tx Power(dBm): -2 ~ 4, Rx Sens.(dBm): -15.8. EASY TO USE : Plug and play, hot-pluggable. Rotate the ring latch down at 90 degree angle to unlock, then pulling transceiver out from switch. Always keep the protective dust plug on the SFPâ??s optical bores until you are ready to make a connection. MiniGBIC module with DDM allows you to monitor the critical information, to find out some potential problems. PREMIUM QUALITY: All of products are manufactured under strict quality control system, every module has been tested one by one on different switches before shipping, to ensure the compatibility. Hot-swappable in Cisco routers and switches OUTSTANDING SUPPORT: Backed by QSFPTEK Store for the life of the module itself, not your equipment; our modules won't void your switchs, with access to our tech support

Supplier: Cisco router, switch, network module, GBIC

WS-G5487 Cisco's industry-standard Gigabit Interface Converter (GBIC) is a hot-swappable input/output device that plugs into a Gigabit Ethernet port/slot, linking the port with the fiber-optic network. GBICs can be used and interchanged on a wide variety of Cisco products and can be intermixed in combinations of IEEE 802.3z- compliant 1000BaseSX, 1000BaseLX/LH, or 1000BaseZX interfaces on a port-by-port basis. Furthermore, Cisco is offering a 1000BaseLX/LH interface that is fully compliant with the IEEE 802.3z 1000BaseLX standard, but has the ability to go up to 10 km over single-mode fiber, 5 km further than garden-variety 1000BaseLX interfaces. As additional capabilities are developed, these modules make it easy to upgrade to the latest interface technology, maximizing investment protection. The WS-G5487, 1000BaseZX operates on ordinary single mode fiber optic link spans of up to 70 km in length. Link spans of up to 100 km are possible using premium single mode fiber or dispersion shifted single mode fiber (premium single mode fiber has a lower attenuation per unit length than ordinary single mode fiber; dispersion shifted single mode fiber has both lower attenuation per unit length, and less dispersion). Cisco 1000Base-ZX GBIC - 1 x 1000Base-ZX x LAN - GBIC

Cisco Short wavelength (1000BASE-SX) GBIC - 1 x 1000Base-SX x LAN - GBIC·+ Cisco's industry-standard Gigabit Interface Converter (GBIC) is a hot-swappable input/output device that plugs into a Gigabit Ethernet port/slot, linking the port with the fiber-optic network. GBICs can be used and interchanged on a wide variety of Cisco products and can be intermixed in combinations of IEEE 802.3z- compliant 1000BaseSX, 1000BaseLX/LH, or 1000BaseZX interfaces on a port-by-port basis. Furthermore, Cisco is offering a 1000BaseLX/LH interface that is fully compliant with the IEEE 802.3z 1000BaseLX standard, but has the ability to go up to 10 km over single-mode fiber, 5 km further than garden-variety 1000BaseLX interfaces. As additional capabilities are developed, these modules make it easy to upgrade to the latest interface technology, maximizing investment protection. The WS-G5486, 1000BaseLX/LH interfaces fully comply with the IEEE 802.3z 1000BaseLX standard. However, their higher optical quality allows them to reach 10 km over single-mode fiber (SMF) versus the 5 km specified in the standard. Cisco Long wavelength/long haul 1000Base-LX/LH GBIC - 1 x 1000Base-LX/LH x LAN +C GBIC

CWDM-SFP

NM-2FE2W

Supplier: Sfp module, sfp transceiver, fiber optic module , cisco sfp module , huawei sfp module , hp sfp module, sfp modules, sfp module price , gbic module , cisco sfp

Supplier: Used cisco router, switch, engine, module, GBIC, SFP

Supplier: Used cisco router, switch, engine, module, gbic, sfp