High Carbon Ferro Manganese - Standard Grades Mn : 70% Min. / 76% Min Si : 1.5% Max. C : 6-8% P : 0.30% Max. / 0.35% Max. S : 0.03% Max. Size : 10 - 80/100 mm
High Carbon Ferro Chrome - Standard Grades Cr : 60% Min. Si : 3% Max. C : 8.50% Max. P : 0.03% Max. S : 0.04% Max. Size: 10 -100 mm (90% Min)
Class F fly ash is designated in ASTM C 618 and originates from anthracite and bituminous coals. It consists mainly of alumina and silica and has a higher LOI than Class C fly ash. Class F fly ash also has a lower calcium content than Class C fly ash. Replacement When used in portland cement, Class F fly ash can be used as a portland cement replacement ranging from 20-30% of the mass of cementitious material. Advantages When used as a portland cement replacement, Class F fly ash offers the following advantages when compared to unmodified portland cement: Increased late compressive strengths (after 28 days) Increased resistance to alkali silica reaction (ASR) Increased resistance to sulfate attack Less heat generation during hydration Increased pore refinement Decreased permeability Decreased water demand Increased workability Decreased cost ($80/ton for portland cement vs. $30/ton for fly ash).
We are engaged in offering superior grade Activated Carbon, which appears black. This variety of Activated Carbon is very popular among the clients for the purity levels it generates and the quality of treated water. It effectively removes excess chlorine, unwanted taste, color, odor and sediments organics from the water. Following are the features of our product range. - High carbon-low ash content - Imparts a high polish to the filtered water - surface area which has tremendous capacity to absorb impurities resulting in clean and fresh water
NANOTAL is a high purity mineral composed of hydrated magnesium silicate originating with exceptional high brightness from the worldâ??s best reserves in India. Talc is the worldâ??s softest and most hydrophobic mineral â?? insoluble and inert. It adds new features to products and makes processes more efficient. The performance of TALC products depends on its particle shape (aspect ratio) and particle size distribution. Our product portfolio offers a wide range of milling characteristics, including a narrow particle spectrum and efficient PSD curves. A variety of applications ranging from Paper, Paints, Polyester Putties, Plastics, Adhesives, Cosmetics, Ceramics and many more is being catered by NANOTEC INDIA product range. Our products are from the purest reserves with controlled residue resulting in some diversely crafted products with precisely controlled particle size distribution for high tech applications .under brand name â??NANOTALâ?? having good barrier properties, reinforcement property, scrub property, gloss, non-yellowing property, corrosion and coverage. Ultrafine NANOTAL provides enhanced reinforcement properties in rubber / elastomer applications. NANOTAL lamellar particles create an impermeable barrier, substantially reducing air and liquid transmissions. NANOTAL also diminishes plasticizer evaporation, resulting in good thermal and weathering resistance, there by extending service life and imparts excellent barrier properties. NANOTAL is reinforcing filler and a processing aid in rubber applications and is particularly suited to high impermeability applications. NANOTAL has the ability to absorb moisture, absorb oils, absorb odor, serve as a lubricant and produce a feel good effect in human skin. Finely ground talc is also used as the powder base of many cosmetic formulations. The tiny platelets of a talc powder readily adhere to the skin but can be washed off easily. NANOTAL softness allows it to be applied and removed without causing skin abrasion. Naturally occurring hydrophobic, platy structured mineral improves reinforcement & stiffness to the end product. Further being chemically inert powder, helps to improve water resistance, chemical resistance and general weatherability. Talc increase the non-Thixotropic viscosity, betters resistance to cracks, dimensional stability and shrink resistance in epoxy sealant, joint compound & automotive putties. Talc being an inert material is exhibiting enormously less reactivity compared to the other fillers. Itâ??s us use in agriculture as a barrier against the minute particles and dust further also act as a carrier in the feed premixes and agricultural chemicals like pesticides. An ultrafine series of NANOTAL is recommended for seed coating to form a uniform micro layer over the seed grains to overcome the problem of moisture formation & disallows premature germination.
NANOTAL is a high purity mineral composed of hydrated magnesium silicate originating with exceptional high brightness from the world best reserves in India. Talc is the world softest and most hydrophobic mineral insoluble and inert. It adds new features to products and makes processes more efficient. The performance of TALC products depends on its particle shape (aspect ratio) and particle size distribution. Our product portfolio offers a wide range of milling characteristics, including a narrow particle spectrum and efficient PSD curves. A variety of applications ranging from Paper, Paints, Polyester Putties, Plastics, Adhesives, Cosmetics, Ceramics and many more is being catered by NANOTEC INDIA product range. Our products are from the purest reserves with controlled residue resulting in some diversely crafted products with precisely controlled particle size distribution for high tech applications under brand name NANOTAL having good barrier properties, reinforcement property, scrub property, gloss, non-yellowing property, corrosion and coverage. Ultrafine NANOTAL provides enhanced reinforcement properties in rubber / elastomer applications. NANOTAL lamellar particles create an impermeable barrier, substantially reducing air and liquid transmissions. AR Talc also diminishes plasticizer evaporation, resulting in good thermal and weathering resistance, there by extending service life and imparts excellent barrier properties. NANOTAL is reinforcing filler and a processing aid in rubber applications and is particularly suited to high impermeability applications. NANOTAL has the ability to absorb moisture, absorb oils, absorb odor, serve as a lubricant and produce a feel good effect in human skin. Finely ground talc is also used as the powder base of many cosmetic formulations. The tiny platelets of a talc powder readily adhere to the skin but can be washed off easily. NANOTAL softness allows it to be applied and removed without causing skin abrasion. Naturally occurring hydrophobic, platy structured mineral improves reinforcement & stiffness to the end product. Further being chemically inert powder, helps to improve water resistance, chemical resistance and general weatherability. Talc increase the non-Thixotropic viscosity, betters resistance to cracks, dimensional stability and shrink resistance in epoxy sealant, joint compound & automotive putties. Talc being an inert material is exhibiting enormously less reactivity compared to the other fillers. It is used in agriculture as a barrier against the minute particles and dust further also act as a carrier in the feed premixes and agricultural chemicals like pesticides. An ultrafine series of NANOTAL is recommended for seed coating to form a uniform micro layer over the seed grains to overcome the problem of moisture formation & disallows premature germination.
NANOTAL is a high purity mineral composed of hydrated magnesium silicate originating with exceptional high brightness from the world best reserves in India. Talc is the world softest and most hydrophobic mineral insoluble and inert. It adds new features to products and makes processes more efficient. The performance of TALC products depends on its particle shape (aspect ratio) and particle size distribution. Our product portfolio offers a wide range of milling characteristics, including a narrow particle spectrum and efficient PSD curves. A variety of applications ranging from Paper, Paints, Polyester Putties, Plastics, Adhesives, Cosmetics, Ceramics and many more is being catered by NANOTEC INDIA product range. Our products are from the purest reserves with controlled residue resulting in some diversely crafted products with precisely controlled particle size distribution for high tech applications under brand name NANOTAL having good barrier properties, reinforcement property, scrub property, gloss, non-yellowing property, corrosion and coverage. Ultrafine NANOTAL provides enhanced reinforcement properties in rubber / elastomer applications. NANOTAL lamellar particles create an impermeable barrier, substantially reducing air and liquid transmissions. AR Talc also diminishes plasticizer evaporation, resulting in good thermal and weathering resistance, there by extending service life and imparts excellent barrier properties. NANOTAL is reinforcing filler and a processing aid in rubber applications and is particularly suited to high impermeability applications. NANOTAL has the ability to absorb moisture, absorb oils, absorb odor, serve as a lubricant and produce a feel good effect in human skin. Finely ground talc is also used as the powder base of many cosmetic formulations. The tiny platelets of a talc powder readily adhere to the skin but can be washed off easily. NANOTAL softness allows it to be applied and removed without causing skin abrasion. Naturally occurring hydrophobic, platy structured mineral improves reinforcement & stiffness to the end product. Further being chemically inert powder, helps to improve water resistance, chemical resistance and general weatherability. Talc increase the non-Thixotropic viscosity, betters resistance to cracks, dimensional stability and shrink resistance in epoxy sealant, joint compound & automotive putties. Talc being an inert material is exhibiting enormously less reactivity compared to the other fillers. It is used in agriculture as a barrier against the minute particles and dust further also act as a carrier in the feed premixes and agricultural chemicals like pesticides. An ultrafine series of NANOTAL is recommended for seed coating to form a uniform micro layer over the seed grains to overcome the problem of moisture formation & disallows premature germination.
NANOTAL is a high purity mineral composed of hydrated magnesium silicate originating with exceptional high brightness from the world best reserves in India. Talc is the world softest and most hydrophobic mineral insoluble and inert. It adds new features to products and makes processes more efficient. The performance of TALC products depends on its particle shape (aspect ratio) and particle size distribution. Our product portfolio offers a wide range of milling characteristics, including a narrow particle spectrum and efficient PSD curves. A variety of applications ranging from Paper, Paints, Polyester Putties, Plastics, Adhesives, Cosmetics, Ceramics and many more is being catered by NANOTEC INDIA product range. Our products are from the purest reserves with controlled residue resulting in some diversely crafted products with precisely controlled particle size distribution for high tech applications under brand name NANOTAL having good barrier properties, reinforcement property, scrub property, gloss, non-yellowing property, corrosion and coverage. Ultrafine NANOTAL provides enhanced reinforcement properties in rubber / elastomer applications. NANOTAL lamellar particles create an impermeable barrier, substantially reducing air and liquid transmissions. AR Talc also diminishes plasticizer evaporation, resulting in good thermal and weathering resistance, there by extending service life and imparts excellent barrier properties. NANOTAL is reinforcing filler and a processing aid in rubber applications and is particularly suited to high impermeability applications. NANOTAL has the ability to absorb moisture, absorb oils, absorb odor, serve as a lubricant and produce a feel good effect in human skin. Finely ground talc is also used as the powder base of many cosmetic formulations. The tiny platelets of a talc powder readily adhere to the skin but can be washed off easily. NANOTAL softness allows it to be applied and removed without causing skin abrasion. Naturally occurring hydrophobic, platy structured mineral improves reinforcement & stiffness to the end product. Further being chemically inert powder, helps to improve water resistance, chemical resistance and general weatherability. Talc increase the non-Thixotropic viscosity, betters resistance to cracks, dimensional stability and shrink resistance in epoxy sealant, joint compound & automotive putties. Talc being an inert material is exhibiting enormously less reactivity compared to the other fillers. It is used in agriculture as a barrier against the minute particles and dust further also act as a carrier in the feed premixes and agricultural chemicals like pesticides. An ultrafine series of NANOTAL is recommended for seed coating to form a uniform micro layer over the seed grains to overcome the problem of moisture formation & disallows premature germination.
NANOTAL is a high purity mineral composed of hydrated magnesium silicate originating with exceptional high brightness from the world best reserves in India. Talc is the world softest and most hydrophobic mineral insoluble and inert. It adds new features to products and makes processes more efficient. The performance of TALC products depends on its particle shape (aspect ratio) and particle size distribution. Our product portfolio offers a wide range of milling characteristics, including a narrow particle spectrum and efficient PSD curves. A variety of applications ranging from Paper, Paints, Polyester Putties, Plastics, Adhesives, Cosmetics, Ceramics and many more is being catered by NANOTEC INDIA product range. Our products are from the purest reserves with controlled residue resulting in some diversely crafted products with precisely controlled particle size distribution for high tech applications under brand name NANOTAL having good barrier properties, reinforcement property, scrub property, gloss, non-yellowing property, corrosion and coverage. Ultrafine NANOTAL provides enhanced reinforcement properties in rubber / elastomer applications. NANOTAL lamellar particles create an impermeable barrier, substantially reducing air and liquid transmissions. AR Talc also diminishes plasticizer evaporation, resulting in good thermal and weathering resistance, there by extending service life and imparts excellent barrier properties. NANOTAL is reinforcing filler and a processing aid in rubber applications and is particularly suited to high impermeability applications. NANOTAL has the ability to absorb moisture, absorb oils, absorb odor, serve as a lubricant and produce a feel good effect in human skin. Finely ground talc is also used as the powder base of many cosmetic formulations. The tiny platelets of a talc powder readily adhere to the skin but can be washed off easily. NANOTAL softness allows it to be applied and removed without causing skin abrasion. Naturally occurring hydrophobic, platy structured mineral improves reinforcement & stiffness to the end product. Further being chemically inert powder, helps to improve water resistance, chemical resistance and general weatherability. Talc increase the non-Thixotropic viscosity, betters resistance to cracks, dimensional stability and shrink resistance in epoxy sealant, joint compound & automotive putties. Talc being an inert material is exhibiting enormously less reactivity compared to the other fillers. It is used in agriculture as a barrier against the minute particles and dust further also act as a carrier in the feed premixes and agricultural chemicals like pesticides. An ultrafine series of NANOTAL is recommended for seed coating to form a uniform micro layer over the seed grains to overcome the problem of moisture formation & disallows premature germination.
We offer to the customers Talc Powder, also known as Soapstone, is a hydrous of Magnesium Silicate. Our Talc Powder is processed using latest techniques. It also undergoes stringent checking to ensure its quality. We deliver Talc Powder in safe packaging like plastic bags and also in customized packing materials. Avail from us high quality Talc Powder at cost-effective rates. Attributes Pearly lustre Has lamellar structure Highly oil absorbent Low specific gravity Easily dispersed Resistant to thermal shocks Applications Used to give smoothness and whiteness to paper Ideal partial replacement of Titanium Dioxide Suitable as a pitch absorber Provides good sanding, bending and holding properties to paints Suitable for improving drying pressing resistance of ceramics Used to lend superior electrical properties and toughness to switch boards and spark plugs Utilized in foundry for molding Used as a filler in plastics, asbestos products and polishes Suitable to be used as finishing of certain textiles Demanded by plastic industries to be used as filler and dusting agent
China Clay Powder offered by us is popularly known as Hydrated Aluminum Silicate. We bring forth Kaolin China Clay that is manufactured from superior quality materials that assure our customers of our authenticity. Finding various applications, our products are utilized in automotive as well as appliances like Paper, Paints, Paper and Textile Industries, Rubber Industries etc
NANOTAL is a high purity mineral composed of hydrated magnesium silicate originating with exceptional high brightness from the world best reserves in India. Talc is the world softest and most hydrophobic mineral insoluble and inert. It adds new features to products and makes processes more efficient. The performance of TALC products depends on its particle shape (aspect ratio) and particle size distribution. Our product portfolio offers a wide range of milling characteristics, including a narrow particle spectrum and efficient PSD curves. A variety of applications ranging from Paper, Paints, Polyester Putties, Plastics, Adhesives, Cosmetics, Ceramics and many more is being catered by NANOTEC INDIA product range. Our products are from the purest reserves with controlled residue resulting in some diversely crafted products with precisely controlled particle size distribution for high tech applications under brand name NANOTAL having good barrier properties, reinforcement property, scrub property, gloss, non-yellowing property, corrosion and coverage. Ultrafine NANOTAL provides enhanced reinforcement properties in rubber / elastomer applications. NANOTAL lamellar particles create an impermeable barrier, substantially reducing air and liquid transmissions. AR Talc also diminishes plasticizer evaporation, resulting in good thermal and weathering resistance, there by extending service life and imparts excellent barrier properties. NANOTAL is reinforcing filler and a processing aid in rubber applications and is particularly suited to high impermeability applications. NANOTAL has the ability to absorb moisture, absorb oils, absorb odor, serve as a lubricant and produce a feel good effect in human skin. Finely ground talc is also used as the powder base of many cosmetic formulations. The tiny platelets of a talc powder readily adhere to the skin but can be washed off easily. NANOTAL softness allows it to be applied and removed without causing skin abrasion. Naturally occurring hydrophobic, platy structured mineral improves reinforcement & stiffness to the end product. Further being chemically inert powder, helps to improve water resistance, chemical resistance and general weatherability. Talc increase the non-Thixotropic viscosity, betters resistance to cracks, dimensional stability and shrink resistance in epoxy sealant, joint compound & automotive putties. Talc being an inert material is exhibiting enormously less reactivity compared to the other fillers. It is used in agriculture as a barrier against the minute particles and dust further also act as a carrier in the feed premixes and agricultural chemicals like pesticides. An ultrafine series of NANOTAL is recommended for seed coating to form a uniform micro layer over the seed grains to overcome the problem of moisture formation & disallows premature germination.
Iron powders are used in many different industries for many different applications. Following are some examples of the iron powder uses such as Brazing, Sintered Products, Friction Products, Soft Magnetic Products, Chemicals etc
NANOTAL 3000 is a high purity TALC POWDER [Having Average Particle Size D-50 : 1.00 microns and Top Cut D-97 : 5.00 microns ]. Our product portfolio offers a wide range of milling characteristics, including a narrow particle spectrum and efficient PSD curves. A variety of applications ranging from Paper, Paints, Polyester Putties, Plastics, Adhesives, Cosmetics, Ceramics and many more is being catered by NANOTEC INDIA product range. Our products are from the purest reserves with controlled residue resulting in some diversely crafted products with precisely controlled particle size distribution for high tech applications under brand name NANOTAL having good barrier properties, reinforcement property, and scrub property, gloss, non-yellowing property, corrosion and coverage. It provides enhanced reinforcement properties in rubber / elastomer applications. NANOTAL lamellar particles create an impermeable barrier, substantially reducing air and liquid transmissions. It also diminishes plasticizer evaporation, resulting in good thermal and weathering resistance, there by extending service life and imparts excellent barrier properties. NANOTAL is reinforcing filler and a processing aid in rubber applications and is particularly suited to high impermeability applications. NANOTAL has the ability to absorb moisture, absorb oils, absorb odor, serve as a lubricant and produce a feel good effect in human skin. Finely ground talc is also used as the powder base of many cosmetic formulations. The tiny platelets of a talc powder readily adhere to the skin but can be washed off easily. NANOTAL softness allows it to be applied and removed without causing skin abrasion. Naturally occurring hydrophobic, platy structured mineral improves reinforcement & stiffness to the end product. Further being chemically inert powder, helps to improve water resistance, chemical resistance and general weatherability. Talc increase the non-Thixotropic viscosity, betters resistance to cracks, dimensional stability and shrink resistance in epoxy sealant, joint compound & automotive putties. NANOTAL Talc being an inert material is exhibiting enormously less reactivity compared to the other fillers. It is used in agriculture as a barrier against the minute particles and dust further also act as a carrier in the feed premixes and agricultural chemicals like pesticides. An ultrafine series of NANOTAL is recommended for seed coating to form a uniform micro layer over the seed grains to overcome the problem of moisture formation & disallows premature germination.
NANOTAL is a high purity mineral composed of hydrated magnesium silicate originating with exceptional high brightness from the world best reserves in India. Talc is the world softest and most hydrophobic mineral insoluble and inert. It adds new features to products and makes processes more efficient. The performance of TALC products depends on its particle shape (aspect ratio) and particle size distribution. Our product portfolio offers a wide range of milling characteristics, including a narrow particle spectrum and efficient PSD curves. A variety of applications ranging from Paper, Paints, Polyester Putties, Plastics, Adhesives, Cosmetics, Ceramics and many more is being catered by NANOTEC INDIA product range. Our products are from the purest reserves with controlled residue resulting in some diversely crafted products with precisely controlled particle size distribution for high tech applications under brand name NANOTAL having good barrier properties, reinforcement property, scrub property, gloss, non-yellowing property, corrosion and coverage. Ultrafine NANOTAL provides enhanced reinforcement properties in rubber / elastomer applications. NANOTAL lamellar particles create an impermeable barrier, substantially reducing air and liquid transmissions. AR Talc also diminishes plasticizer evaporation, resulting in good thermal and weathering resistance, there by extending service life and imparts excellent barrier properties. NANOTAL is reinforcing filler and a processing aid in rubber applications and is particularly suited to high impermeability applications. NANOTAL has the ability to absorb moisture, absorb oils, absorb odor, serve as a lubricant and produce a feel good effect in human skin. Finely ground talc is also used as the powder base of many cosmetic formulations. The tiny platelets of a talc powder readily adhere to the skin but can be washed off easily. NANOTAL softness allows it to be applied and removed without causing skin abrasion. Naturally occurring hydrophobic, platy structured mineral improves reinforcement & stiffness to the end product. Further being chemically inert powder, helps to improve water resistance, chemical resistance and general weatherability. Talc increase the non-Thixotropic viscosity, betters resistance to cracks, dimensional stability and shrink resistance in epoxy sealant, joint compound & automotive putties. Talc being an inert material is exhibiting enormously less reactivity compared to the other fillers. It is used in agriculture as a barrier against the minute particles and dust further also act as a carrier in the feed premixes and agricultural chemicals like pesticides. An ultrafine series of NANOTAL is recommended for seed coating to form a uniform micro layer over the seed grains to overcome the problem of moisture formation & disallows premature germination.
NANOTAL is a high purity mineral composed of hydrated magnesium silicate originating with exceptional high brightness from the world best reserves in India. Talc is the world softest and most hydrophobic mineral insoluble and inert. It adds new features to products and makes processes more efficient. The performance of TALC products depends on its particle shape (aspect ratio) and particle size distribution. Our product portfolio offers a wide range of milling characteristics, including a narrow particle spectrum and efficient PSD curves. A variety of applications ranging from Paper, Paints, Polyester Putties, Plastics, Adhesives, Cosmetics, Ceramics and many more is being catered by NANOTEC INDIA product range. Our products are from the purest reserves with controlled residue resulting in some diversely crafted products with precisely controlled particle size distribution for high tech applications under brand name NANOTAL having good barrier properties, reinforcement property, scrub property, gloss, non-yellowing property, corrosion and coverage. Ultrafine NANOTAL provides enhanced reinforcement properties in rubber / elastomer applications. NANOTAL lamellar particles create an impermeable barrier, substantially reducing air and liquid transmissions. AR Talc also diminishes plasticizer evaporation, resulting in good thermal and weathering resistance, there by extending service life and imparts excellent barrier properties. NANOTAL is reinforcing filler and a processing aid in rubber applications and is particularly suited to high impermeability applications. NANOTAL has the ability to absorb moisture, absorb oils, absorb odor, serve as a lubricant and produce a feel good effect in human skin. Finely ground talc is also used as the powder base of many cosmetic formulations. The tiny platelets of a talc powder readily adhere to the skin but can be washed off easily. NANOTAL softness allows it to be applied and removed without causing skin abrasion. Naturally occurring hydrophobic, platy structured mineral improves reinforcement & stiffness to the end product. Further being chemically inert powder, helps to improve water resistance, chemical resistance and general weatherability. Talc increase the non-Thixotropic viscosity, betters resistance to cracks, dimensional stability and shrink resistance in epoxy sealant, joint compound & automotive putties. Talc being an inert material is exhibiting enormously less reactivity compared to the other fillers. It is used in agriculture as a barrier against the minute particles and dust further also act as a carrier in the feed premixes and agricultural chemicals like pesticides. An ultrafine series of NANOTAL is recommended for seed coating to form a uniform micro layer over the seed grains to overcome the problem of moisture formation & disallows premature germination.
NANOTAL is a high purity mineral composed of hydrated magnesium silicate originating with exceptional high brightness from the world best reserves in India. Talc is the world softest and most hydrophobic mineral insoluble and inert. It adds new features to products and makes processes more efficient. The performance of TALC products depends on its particle shape (aspect ratio) and particle size distribution. Our product portfolio offers a wide range of milling characteristics, including a narrow particle spectrum and efficient PSD curves. A variety of applications ranging from Paper, Paints, Polyester Putties, Plastics, Adhesives, Cosmetics, Ceramics and many more is being catered by NANOTEC INDIA product range. Our products are from the purest reserves with controlled residue resulting in some diversely crafted products with precisely controlled particle size distribution for high tech applications under brand name NANOTAL having good barrier properties, reinforcement property, scrub property, gloss, non-yellowing property, corrosion and coverage. Ultrafine NANOTAL provides enhanced reinforcement properties in rubber / elastomer applications. NANOTAL lamellar particles create an impermeable barrier, substantially reducing air and liquid transmissions. AR Talc also diminishes plasticizer evaporation, resulting in good thermal and weathering resistance, there by extending service life and imparts excellent barrier properties. NANOTAL is reinforcing filler and a processing aid in rubber applications and is particularly suited to high impermeability applications. NANOTAL has the ability to absorb moisture, absorb oils, absorb odor, serve as a lubricant and produce a feel good effect in human skin. Finely ground talc is also used as the powder base of many cosmetic formulations. The tiny platelets of a talc powder readily adhere to the skin but can be washed off easily. NANOTAL softness allows it to be applied and removed without causing skin abrasion. Naturally occurring hydrophobic, platy structured mineral improves reinforcement & stiffness to the end product. Further being chemically inert powder, helps to improve water resistance, chemical resistance and general weatherability. Talc increase the non-Thixotropic viscosity, betters resistance to cracks, dimensional stability and shrink resistance in epoxy sealant, joint compound & automotive putties. Talc being an inert material is exhibiting enormously less reactivity compared to the other fillers. It is used in agriculture as a barrier against the minute particles and dust further also act as a carrier in the feed premixes and agricultural chemicals like pesticides. An ultrafine series of NANOTAL is recommended for seed coating to form a uniform micro layer over the seed grains to overcome the problem of moisture formation & disallows premature germination.
NANOTAL 530 is a high purity mineral composed of hydrated magnesium silicate originating with exceptional high brightness from the world best reserves in India. Talc is the world softest and most hydrophobic mineral insoluble and inert. It adds new features to products and makes processes more efficient. The performance of TALC products depends on its particle shape (aspect ratio) and particle size distribution. Our product portfolio offers a wide range of milling characteristics, including a narrow particle spectrum and efficient PSD curves. A variety of applications ranging from Paper, Paints, Polyester Putties, Plastics, Adhesives, Cosmetics, Ceramics and many more is being catered by NANOTEC INDIA product range. Our products are from the purest reserves with controlled residue resulting in some diversely crafted products with precisely controlled particle size distribution for high tech applications under brand name NANOTAL having good barrier properties, reinforcement property, scrub property, gloss, non-yellowing property, corrosion and coverage. Ultrafine NANOTAL provides enhanced reinforcement properties in rubber / elastomer applications. NANOTAL lamellar particles create an impermeable barrier, substantially reducing air and liquid transmissions. AR Talc also diminishes plasticizer evaporation, resulting in good thermal and weathering resistance, there by extending service life and imparts excellent barrier properties. NANOTAL is reinforcing filler and a processing aid in rubber applications and is particularly suited to high impermeability applications. NANOTAL has the ability to absorb moisture, absorb oils, absorb odor, serve as a lubricant and produce a feel good effect in human skin. Finely ground talc is also used as the powder base of many cosmetic formulations. The tiny platelets of a talc powder readily adhere to the skin but can be washed off easily. NANOTAL softness allows it to be applied and removed without causing skin abrasion. Naturally occurring hydrophobic, platy structured mineral improves reinforcement & stiffness to the end product. Further being chemically inert powder, helps to improve water resistance, chemical resistance and general weatherability. Talc increase the non-Thixotropic viscosity, betters resistance to cracks, dimensional stability and shrink resistance in epoxy sealant, joint compound & automotive putties. Talc being an inert material is exhibiting enormously less reactivity compared to the other fillers. It is used in agriculture as a barrier against the minute particles and dust further also act as a carrier in the feed premixes and agricultural chemicals like pesticides. An ultrafine series of NANOTAL is recommended for seed coating to form a uniform micro layer over the seed grains to overcome the problem of moisture formation & disallows premature germination.
NANOTAL 1000 is a high purity TALC POWDER [Having Average Particle Size D-50 : 2.50 microns and Top Cut D-97 : 9.50 microns ]. Our product portfolio offers a wide range of milling characteristics, including a narrow particle spectrum and efficient PSD curves. A variety of applications ranging from Paper, Paints, Polyester Putties, Plastics, Adhesives, Cosmetics, Ceramics and many more is being catered by NANOTEC INDIA product range. Our products are from the purest reserves with controlled residue resulting in some diversely crafted products with precisely controlled particle size distribution for high tech applications under brand name NANOTAL having good barrier properties, reinforcement property, and scrub property, gloss, non-yellowing property, corrosion and coverage. It provides enhanced reinforcement properties in rubber / elastomer applications. NANOTAL lamellar particles create an impermeable barrier, substantially reducing air and liquid transmissions. It also diminishes plasticizer evaporation, resulting in good thermal and weathering resistance, there by extending service life and imparts excellent barrier properties. NANOTAL is reinforcing filler and a processing aid in rubber applications and is particularly suited to high impermeability applications. NANOTAL has the ability to absorb moisture, absorb oils, absorb odor, serve as a lubricant and produce a feel good effect in human skin. Finely ground talc is also used as the powder base of many cosmetic formulations. The tiny platelets of a talc powder readily adhere to the skin but can be washed off easily. NANOTAL softness allows it to be applied and removed without causing skin abrasion. Naturally occurring hydrophobic, platy structured mineral improves reinforcement & stiffness to the end product. Further being chemically inert powder, helps to improve water resistance, chemical resistance and general weatherability. Talc increase the non-Thixotropic viscosity, betters resistance to cracks, dimensional stability and shrink resistance in epoxy sealant, joint compound & automotive putties. NANOTAL Talc being an inert material is exhibiting enormously less reactivity compared to the other fillers. It is used in agriculture as a barrier against the minute particles and dust further also act as a carrier in the feed premixes and agricultural chemicals like pesticides. An ultrafine series of NANOTAL is recommended for seed coating to form a uniform micro layer over the seed grains to overcome the problem of moisture formation & disallows premature germination.
NANOTAL 2000 is a high purity TALC POWDER [Having Average Particle Size D-50 : 1.80 microns and Top Cut D-97 : 7.00 microns ]. Our product portfolio offers a wide range of milling characteristics, including a narrow particle spectrum and efficient PSD curves. A variety of applications ranging from Paper, Paints, Polyester Putties, Plastics, Adhesives, Cosmetics, Ceramics and many more is being catered by NANOTEC INDIA product range. Our products are from the purest reserves with controlled residue resulting in some diversely crafted products with precisely controlled particle size distribution for high tech applications under brand name NANOTAL having good barrier properties, reinforcement property, and scrub property, gloss, non-yellowing property, corrosion and coverage. It provides enhanced reinforcement properties in rubber / elastomer applications. NANOTAL lamellar particles create an impermeable barrier, substantially reducing air and liquid transmissions. It also diminishes plasticizer evaporation, resulting in good thermal and weathering resistance, there by extending service life and imparts excellent barrier properties. NANOTAL is reinforcing filler and a processing aid in rubber applications and is particularly suited to high impermeability applications. NANOTAL has the ability to absorb moisture, absorb oils, absorb odor, serve as a lubricant and produce a feel good effect in human skin. Finely ground talc is also used as the powder base of many cosmetic formulations. The tiny platelets of a talc powder readily adhere to the skin but can be washed off easily. NANOTAL softness allows it to be applied and removed without causing skin abrasion. Naturally occurring hydrophobic, platy structured mineral improves reinforcement & stiffness to the end product. Further being chemically inert powder, helps to improve water resistance, chemical resistance and general weatherability. Talc increase the non-Thixotropic viscosity, betters resistance to cracks, dimensional stability and shrink resistance in epoxy sealant, joint compound & automotive putties. NANOTAL Talc being an inert material is exhibiting enormously less reactivity compared to the other fillers. It is used in agriculture as a barrier against the minute particles and dust further also act as a carrier in the feed premixes and agricultural chemicals like pesticides. An ultrafine series of NANOTAL is recommended for seed coating to form a uniform micro layer over the seed grains to overcome the problem of moisture formation & disallows premature germination.
