Carbon, Ductile Iron Castings .
Iron ore is the main source of primary iron required for the global iron and steel industries. It is essential to produce steel, which helps to create and maintain a strong industrial base. fe 62 and other percentages. Iron ore mining methods vary by the type of ore being mined. There are four main types of iron ore deposits worked currently, depending on the mineralogy and geology of the ore deposits. These are magnetite, titanomagnetite, massive hematite and pisolitic ironstone deposits. Origin :- Mexico , Brazil, South Africa. Iron ore with Fe2O3 content 70%. Fe2O3 - 70,03%, SiO2 - 22,08%, Al2O3 - 3,25%, P - 0,099%, FeO - 1,10%, CaO - 0,29%, MgO - 0,47%, TiO2 - 0,101%, MnO - 0,034%, S - 0,03%, Humidity - up to 5,00%. Iron ore with Fe2O3 content 60%. Fe2O3 - 60,29%, SiO2 - 35,54%, Al2O3 - 1,03%, P - 0,042%, FeO - 1,09%, CaO - 0,17%, MgO - 0,34%, TiO2 - 0,036%, MnO - 0,051%, S - 0,081%, Humidity - up to 5,00%
Cast iron and steel castings.Transportation and shipping
Casting Iron and Steel..
Iron casting, steel casting.
Casting.
We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.
Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills. It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color. Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating. From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list In particular the mill scale can be classified as follows: Einecs (european commission no.): 266-007-8 Waste code: 10 02 10 Basel code: b 12 30 Hs code: 2619.00
Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.
The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires. Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants. We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test. The material can be loaded loose in 40 HC container. For further details, please feel free to contact us.
The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
All iron goods.
Large Cast Iron Lathe Bed, Machine Tool Bed Gray iron HT200-300 (GG20-30, FC200-300, ASTM No.30-45) Weight: 100~40000kgs (220~88183lbs) Maximum Size: 10000x8000x5000mm Best quality, competitive price!!! ISO9001:2008 Customized manufacturing according to drawing
Type: Pans Pans Type: Frying Pans & Skillets Metal Type: Cast Iron Certification: CE / EU, CIQ, EEC, FDA, LFGB, SGS Feature: Eco-Friendly, Stocked Place of Origin: Zhejiang, China (Mainland) Brand Name: Fountainwoods Model Number: WY-AF40H Name: Cast Iron Fry Pan Usage: Kitchen / Outdoors Color: Black Size: 12/14/16/18/20/22/24/26/28/30/32/34/36/37/40/45cm Material: Cast Iron Thickness: 1.5mm Handle: Metal Lid: Non Interior: Non Bottom: Round and Flat
Type: Pans Pans Type: Frying Pans & Skillets Metal Type: Cast Iron Certification: CE / EU, CIQ, EEC, FDA, LFGB, SGS Feature: Eco-Friendly, Stocked Place of Origin: Zhejiang, China (Mainland) Brand Name: Fountainwoods Model Number: WY-DF40H Name: Paella Pan Usage: Kitchen / Outdoors Color: Black/Silvery Size: 12/14/16/18/20/22/24/26/28/30/32/34/36/37/40/45/50cm Material: Cast Iron Thickness: 1.5/3mm Handle: Two Metal Ears Lid: Non Interior: Non Bottom: Round and Flat
Type:Cookware Sets Material:Metal Metal Type:Cast Iron Certification:CE / EU, CIQ, EEC, FDA, LFGB, SGS Feature:Eco-Friendly Place of Origin:Hebei, China (Mainland) Brand Name:Southsea Model Number:NH-RC20 Usage:Home cooking Name:High Quality Hot Sale Cast Iron Thermal Cooker Color:Black(as buyer's requirement) Handle:cast iron Lid:cast iron Size:Dia16*10cm Weight:2.16kg Description:Enamel Cookware Pot Coating:enamel Shape:Round Packaging Details:Brown box or color box Delivery Time:45 days after payment Supply Ability:5000 Piece/Pieces per Day Port:Tianjin Port, China Payment:L/C,D/A,D/P,T/T,Western Union Business Card: Anping Nanhai Sanitary Ware Co.,Ltd
Type:Thermal Cooker Material:Metal Metal Type:Cast Iron Certification:CE / EU, CIQ, EEC, FDA, LFGB, SGS Feature:Eco-Friendly Place of Origin:Hebei, China (Mainland) Brand Name:Southsea Model Number:NH-RC08 Usage:Home cooking Name:High Quality Hot Sale Cast Iron Hot Pot Color:Red(as buyer's requirement) Handle:cast iron Lid:cast iron Size:Dia23*12cm, Dia24*13cm Weight:5.45kg, 6.16kg Advantage:Durable Coating:enamel Shape:Round Packaging Details:Brown box or color box Delivery Time:45 days after payment Supply Ability:5000 Piece/Pieces per Day Port:Tianjin Port, China Payment:L/C,D/A,D/P,T/T,Western Union Business Card: Anping Nanhai Sanitary Ware Co.,Ltd
Type:Thermal Cooker Material:Metal Metal Type:Cast Iron Certification:CE / EU, CIQ, EEC, FDA, LFGB, SGS Feature:Eco-Friendly Place of Origin:Hebei, China (Mainland) Brand Name:Southsea Model Number:NH-RC07 Usage:Home cooking Name:Eco-friendly Hot Sale Cast Iron Hot Pot Color:Black(as buyer's requirement) Handle:cast iron Lid:cast iron Size:Dia25*12.5cm Weight:5.72kg Advantage:Durable Coating:enamel Shape:Round Packaging Details:Brown box or color box Delivery Time:45 days after payment Supply Ability:5000 Piece/Pieces per Day Port:Tianjin Port, China Payment:L/C,D/A,D/P,T/T,Western Unio