Features for the Champion 100416 - Generator Tri-Fuel Technology Your 8000-watt portable generator operates on natural gas, propane, or gasoline, plus natural gas and propane hoses are included so the unit is ready to run on any fuel right out of the box. Electric Start Power up the 459cc Champion engine with the handy rocker switch, battery included. Intelligauge with CO Shield�® rack voltage, frequency, session run time, and total run time to monitor output and track maintenance intervals, plus the UL-recognized sensor uses an LED to indicate CO shutoff or fault. Powerful Gasoline: 10,000 starting watts and 8000 running watts, propane: 9000 starting watts and 7200 running watts, natural gas: 8750 starting watts and 7000 running watts and engine oil is included. SPECIFICATIONS Portable Generator Technology : Tri Fuel, CO Shield Gasoline Starting Watts: 10000W Gasoline Running Watts: 8000W Propane Starting Watts: 9000W Propane Running Watts: 7200W Natural Gas Starting Watts: 8750W Natural Gas Running Watts: 7000W Gasoline Starting Amps at 120V: 83.3A Gasoline Starting Amps at 240V: 41.7A Gasoline Running Amps at 120V: 66.7A Gasoline Running Amps at 240V: 33.3A Propane Starting Amps at 120V: 75A Propane Starting Amps at 240V: 37.5A Propane Running Amps at 120V: 60A Propane Running Amps at 240V: 30A Natural Gas Starting Amps at 120V: 72.9A Natural Gas Starting Amps at 240V: 36.5A Natural Gas Running Amps at 120V: 58.3A Natural Gas Running Amps at 240V: 29.2A Volts: 120/240 Frequency: 60Hz Outlets: GFCI 120V 20A Duplex (5-20R) (2), 120V 30A Locking (L5-30R), 120/240V 30A (L14-30R) GFCI Outlets: Yes Covered Outlets: Yes Covered Circuit Breakers: Yes Gasoline Run Time at 1/2 Load: 12.5 h. Propane Run Time at 1/2 Load: 5 h. Noise Level: 74 dBA Parallel Capability: No DC Operation: No Voltmeter: Intelligauge Automatic Voltage Regulation: No Battery: Yes Start Type: Recoil, Electric Engine Brand: Champion Engine Size: 459cc Engine Type: 4-stroke Engine Speed: 3600 Fuel Type: Gasoline, Propane (LPG), Natural Gas (NG) Fuel Gauge: Yes Gasoline Capacity: 8.5 gal. Gasoline Tank Material: Steel Engine Oil Type: 10W-30 Engine Oil Capacity: 1.1 qt. Engine Oil Included: Yes Low Oil Shut-Off: Yes Wheels: Yes Wheel Type: Solid Wheel Diameter: 10 in. PGMA G300-2018 Compliant: Yes EPA Certified: Yes CARB Compliant: Yes DIMENSIONS Length: 27.6 in. Width: 28.2 in. Height: 26.0 in. Weight: 207.0 lb.
Standard accessories: Guide bar, Saw chain, Manual, Bar cover, Tool kit Quality & Inspection: 1. Cooperated with good reputation suppliers. 2. 100% check the quality of spare parts produced by supporting suppliers. 3. QC checks every step from spare parts to full-line production. Main features of Senwart cs070 gasoline chainsaw: 1. lightweight, full of safety features, consisting of inertia chain brake, chain catcher, felling spikes, and full anti-vibration damping. 2. Ergonomically designed handle, comfortable and balanced. 3. Automatic chain oil lubrication system. 4. Large and tool-free oil filler cap. 5. Easy to clean, maintain, and replace the air filter. Optional accessories: 1. Champion, NGK spark plug 2. Walbro, Tillotson carburetor 3. Oregon, Stihl chain & bar Crankshaft: Dual-ringed pistons provide better compression and longer engine life, double counterweighted crankshaft helps perfectly balance the engine, fan-shaped connector rod deliveries improved acceleration. Digital Ignition: Digital Ignition ensures easy starting in all conditions, a cleaner engine and reduced emissions. Carburetor: The engine utilizes the best quality brand carburetor. Piston: Lightweight pistons/2 piston rings Exhaust: Special materials (1.0mm thick) are used in production to reduce noise emissions. Packaging: Standard export carton, 5-layer box. If there is no special requirement, we will use standard export packing. OEM for above 500pcs. MODEL: CS070 Engine type : Single Cylinder, Two-stroke, Air-cooling Cylinder diameter : 58mm*40mm Power : 4.5kW / 6.0HP Displacement : 105.7cc Working speed : 7,500rpm Idle speed : 3,300rpm Fuel tank : 1200ml Oil tank : 530ml Fuel mixture ratio : 25:1(Gasoline 25 : 2-cycle Oil 1) Standard bar lengths : 36 inch/91.5cm Chain pitch/gauge : .404"/.063" Optional bar lengths : 30"-42" Weight (without bar/chain) : 12.5kg
The new Onan QG 2800i / 2500i LP is a high efficiency gasoline generator with reduced noise and vibration levels, while providing a returnless EFI system to improve performance bration and noise Variable-speed Generator Less noise and vibration and lower fuel consumption Three-point isolation mounts and integrated flex coupling on the muffler Reduce vibrations felt inside of RV Maintenance and operation Oil level and pressure monitoring No daily oil check necessary 40% larger oil capacity Greater cooling capacity Inverter control Prevents nuisances circuit breaker tripping Electronic fuel ignition No carburetor varnishing and monitoring generator functions on OEM status display panels Fuel and efficiency Variable speed Slows the generator down to improve fuel efficiency and moderate operating loads Oil and inverter temperature sensors Shut down generator to protect equipment if oil or inverter exceed recommended range 9% lighter than previous model Increases cargo capacity Available in gas or LP (propane) models Provides fuel flexibility and can eliminate the need for alternative fueling tanks Computer-controlled variable speed operation matches engine speed to load demand, minimizing noise level and vibration. LP and EFI gasoline models No fuel return line necessary - EFI gasoline EVAP model for specialized applications High power quality with inverted electrical output for sensitive RV loads. J1939 communications capable Increased oil capacity, reduced oil consumption, low oil shutdown switch, high oil temperature sensor, allows for no required oil checks between recommended oil changes. Quietest generator sets of their size. Completely enclosed with muffler, quick and easy to install. 3-year limited warranty Low fuel consumption
BLUEBIRD HM200 (20") 4.4HP HONDA HOVER MOWER Price:$641.10 SKU:HM200 Brand:Bluebird Condition:New Weight:1.00 LBS Shipping:Calculated at checkout Product Description Features Special Order Item - Please Allow Up To 3 Weeks For Delivery Advanced Design With High Quality Materials Proprietary material blend offers immense strength without compromising manueverability Powerful 4.4HP 160cc Honda GCV160 4-Cycle Engine Reliable, rugged and easy-to-start No mixing of oil and gas and less exhaust Hover Mow Your Lawn With Precision Air cushion ride technology tackles slopes, pits and other uneven terrain Comfort & Control Padded handle moves easily on Versa-Mount pivots Two built-in mount positions allow fine tune adjusting Handle length of 59" provides control at any angle Cut Accurately & Efficiently Easily choose a cutting height from 0.3" to 3" 20" cutting width handles the work of 4 stick trimmers Stainless steel blade with proprietary design Easy To Move & Easy To Store Integrated front grab handle makes for simple loading and unloading Never worry about grabbing the blade or engine during transport Weighs only 36.5 pounds Not Recommended For Use On More Than A 45 Degree Angle Specifications Engine Engine Brand Honda GCV Starting System Recoil Start Engine Cycle 4-Cycle HP 4.4 HP CC 160 CCs Deck Blades 1 Blade Cutting Width 16 Inches Cutting Height 0.3-3 Inches Drive Drive System Push Overview Weight 36.5 Pounds Product Length 59.0 Inches Product Width 23.4 Inches Product Height 36.7 Inches Consumer Warranty 2 Years
Xiongcai Motor Controller XCA107 Designed For Automotive Engine Cooling 1. Voltage DC16~36V 2. Rated Current 4.6A 3. Working Temp -40 125 4. Working Humidity 95% 5. Size: 61*56*17mm 6. Protection under voltage, over voltage, low temperature, over temperature, plugging, reverse connection, short circuit 7. PWM speed regulation Established in 2011, founded by experienced engineer, XIONGCAI TECH is a pioneer in specialized field of motor controller (electronic speed control or ESC), especially in water pump for auto engine cooling. Xiongcai had engineered a motor controller for automotive engine cooling---XCA107, which has been using in automotive engine for years. ACHR, a company rooted in automotive water pump for decades, contacted us and inquired about motor controller for automotive water pump. The client was really picky and particular, their engineer team set a standard on protection measure beyond the industry. They said they had met several suppliers, some items of the standards were unacceptable, because if all items met this extremely high standard, the cost would exceed cost budget. Xiongcai team wanted to give a shot. Engineered from ground up, Xiongcai R&D team designed a combination of software and hardware meticulously called XCC107, making all parameters up to customers standard. After one year test and verification, Xiongcai XCA107 motor controller for water pump was approved. The client has introduced this product for several years till now. Xiongcai XCA107 Motor Controller for water pump provides protection measures including under voltage, over voltage, over current, low temperature, over temperature, plugging, reverse connection, short circuit, this means the motor controller may stop working due to some reason but never be damaged. We are one of the few engineering companies providing a full service from design to supply of product, which means we design, analyze, test and supply finished products. Xiongcai motor controllers have been applied to many top brands in auto industries, such as Jingyi Group, ACHR, FAW Group, FAWDE, Shenhai Electrical Appliances, Kesen, Cummins and more. Contact us Shenzhen Xiongcai Technology Co., Ltd for more detail, we deliver excellent solution to you.
oilfield christmas tree and wellhead components The oilfield christmas tree is an assembly of valves and accessories, used for fluid control of oil and gas wells, and provides access to the production tubing string. It includes all the equipment on the upper flange of the tubing head. The oilfield christmas tree assembly can be used in many different combinations to meet the needs of any special purpose. According to different functions, the oilfield christmas tree is divided into special wellhead devices for oil production (self-injection, artificial lift), gas production (natural gas and various acid gases), water injection, thermal production, fracturing, acidification, etc. And form series according to different pressure levels. oilfield christmas tree and wellhead components are mainly used for gas production and gas injection. Because the relative density of natural gas is low, the pressure of gas injection is low, regardless of whether the gas production or gas injection wellhead pressure is high, the flow rate is high, and it is easy to leak. Sometimes there are corrosive media such as H2S and CO2 in the natural gas, which is harmful to the tree. Tightness and its material must have stricter requirements. Sometimes for safety, double valves are used for oil and casing. For some high-pressure and ultra-high-pressure gas wells, the valves are integrally forged with high-quality steel. The main pressure-bearing parts of the companys Christmas tree and tubing head cross are made of forgings or specially smelted castings, so they have the characteristics of high pressure bearing, safety and reliability. Function 1. It is the base of the oilfield christmas tree. Hanging and fixing the oil pipe hanger. 3. Pack the casing annular space. 4. It is the casing operation window. 5. Provide a control channel for the downhole safety valve and a penetration channel for the electric pump cable. 10 wellhead components casing head The casing head is a kind of part connecting casings and wellheads. It provides a transition joint for the tubing head.Christmas tree and other wellheads. Both top and bottom connections are API 6A flanged, and the flanges are provided with locking bolts. Casing Heads have a straight bore bowl with 45 C landing shoulder design which avoids damage to sealing areas by drilling tools and prevents test plug and bowl protector wedging problems when pressure is applied. Casing Heads are normally furnished with threaded outlets and studded outlets are available upon request. Bottom connections can be furnished threaded or slip-on for welding.
Features for the DuroMax XP11500EH Generator Plenty of Power With 11,500 starting watts and 9,000 running watts, this unit can handle heavy loads, from lights and a refrigerator to a home air conditioner and high amperage power tools. Dual Fuel Technology This generator runs on gasoline or propane, giving you the freedom and flexibility of fuel choice. Powerful Engine â?? The DuroMax 457cc OHV engine is a workhorse that provides plenty of power to handle multiple jobs, from powering high voltage appliances to heavy duty power tools. Low Oil Shutoff â?? Protects your investment by automatically shutting the generator off when it senses that the oil is low. Fully Featured Power Panel â?? The power panel includes a wide selection of outlets for maximum compatibility in your applications including: 2 120V household GFCI outlets, 1 120V 30A twist lock outlet, 1 240V 30A outlet, and one 240V 50A outlet. The panel also includes a digital voltmeter. Complies with Emissions Standards â?? All DuroMax generators are both approved by the EPA (Environmental Protection Agency) and CARB (California Air Resources Board) and follow strict guidelines to ensure our generators are as environmentally friendly as possible. Included Oil Funnel Spark Plug Wrench Tool Set Wheel & Handle Kit Propane Regulator Ownerâ??s Manual Specifications (POWER) GASOLINE Peak Watts: 11,500 Running Watts: 9,000 Peak Amps @ 120V: 95.83 Running Amps @ 120V: 75.00 Peak Amps @ 240V: 47.92 Running Amps @ 240V: 37.50 PROPANE Peak Watts: 10,925 Running Watts: 8,550 Peak Amps @ 120V: 91.04 Running Amps @ 120V: 71.25 Peak Amps @ 240V: 45.52 Running Amps @ 240V: 35.63 PRODUCT SPECIFICATIONS Amperage: 75.00A / 37.50A Voltage: 120V / 240VAC Frequency: 60 Hz Engine Size: 457 cc Engine Type: 4-Cycle Air-Cooled Spark-Ignition Engine Speed: 3600 rpm Fuel Type: Gasoline / Propane Fuel Tank Capacity (Gasoline): 8.3 gal Suggested Tank Size (Propane): 40 lbs. Runtime (Gasoline) at 50% Load: 8 hrs. Runtime (Propane) at 50% Load: 6 hrs. Start Type: Electric / Recoil Volume Level: 72 dB EPA Certified: Yes CARB Certified: Yes Product Dimensions: 29" L x 30" W x 26" H Product Weight: 224 lbs.
Features for the California Air Tools 10020DSPC Air Compressor mowerequip....com The CALIFORNIA AIR TOOLS 10020DSPC Ultra Quiet & Oil-Free Air Compressor is designed to be one of the quietest 2.0 horsepower air compressors in the industry having only 58 decibels of sound. Designed for many applications including Dental Offices and Milling Machines. The powerful 2.0 HP motor operates at only 1680 RPM creating less noise, vibration and creating less wear. The Oil-Free Dual Piston Pump System is engineered for longevity, high performance, and durability. The SP-9421 Motor/Pump is tested for a minimum pump life of 3000 hours before service. 30% more life before repair Large 10.0-gallon steel air tank. The Air Dyer is specially designed to remove the water vapor from the air to protect sensitive tools and machinery. To dry the air from the air compressor an Aftercooler and Dryer are utilized. The aftercooler is a heat exchanger for cooling the discharge air from the air compressor. The water vapor from the compressed air is condensed into liquid form and pushed into the Air Dyer. The sturdy large steel cabinet on caster wheels makes it easier to move and reduces the noise level. The interior of the cabinet is lined with acoustic sound proofing foam insulation to reduce the air compressor's noise and vibration. The two latching door handles allows for easy access to the air compressor.'' The two exhaust fans are designed to remove the air from the cabinet for a cooler running air compressor. This air compressor is ideal for anyone working inside (office, shop, store, warehouse, or home) where noise is a major issue. Activated Alumina is used in air repurification (due to its high water and carbon dioxide adsorption capacity) and adsorption of sulfur compounds. Commercial Use Assembled in USA with global components Air Dyer Includes Activated Alumina desiccant with a 4000-hour life. Oil-Free Pump Cleaner air for better tool operation. Less maintenance and Costs. One 1/4 Industrial female quick connector Two Pressure control gauges Thermal Overload Protector Specifications Sound (Ultra Quiet): 58 decibels Maximum Pressure: 130 PSI Kick On Pressure: 100 PSI Kick Off Pressure: 130 PSI Volts: 110v Hertz: 60 Hz Low Amp Draw: 14.0 Amps Tank fill rate from empty to full: 130 Seconds Recovery time from 100 PSI to 130 PSI: 40 Seconds Duty Cycle: 70/30 Maximum Run Time: 30-60 min. (Depending PSI & CFM) Dimensions: L (26") x W (30") x H (39.5") Weight: 221 pounds Aftercooler: Condenser Horsepower: 2.0HP (Rated/Running) Air Flow Per Minute: 6.40 CFM @ 40 PSI Air Flow Per Minute: 5.30 CFM @ 90 PSI
Xiongcai Technology XCA105 Motor Speed Controller For Fuel Pump 1. Voltage DC16~36V 2. Rated Currentï¼?10A 3. Working Tempï¼?-40ï½?85â?? 4. Working Humidityï¼?95% 5. Size: 87*84*15mm 6. Protectionï¼?under voltage, over voltage, low temperature, over temperature, plugging, reverse connection, short circuit 7. PWM speed regulation With 12-year experience, Xiongcai Technology, a pioneering company in specialized field of motor control. Founded by experienced engineer, started the innovative journey in motor control. Established in 2011, Xiongcai Technology emerged as a pioneer driven by a commitment to drive motor more efficienctly and put your devices to their limit. We are one of the few engineering companies providing a full service from design to supply of product, which means we design, analyze, test and supply finished products. Xiongcai released a motor controller XCA105, engineered for automotive fuel pump. With pwoer system of 8A current, DC8-18V, push the performance to its limit. Minus 40 degree to 125 degree working temperature enables the motor controller work at any weather condition. The dimension is 37*34*8mm, compact design makes installation more flexible. You don't need to make a big space for this component. Safety is vital to automotive application. It's small, but it is engineered to function without sacrificing safety. The protection measures include under voltage, over voltage, over current low temperature, over temperature, plugging, reverse connection and short circuit protection. safety is always the first priority. Xiongcai motor controllers have been applying in top brands in automotive industries, such as Jingyi Group, Risun, FAW Group, FAWDE, Feilong Auto (FLACC), Keshen, Unicent and more. We can put your RC car in extreme. Contact Shenzhen Xiongcai Technology Co., Ltd for detail.
Features for the DuroMax XP10000HX Generator Digital Command Center: All-new control center with a digital multimeter, push-button start, and a front-facing fuel interface allowing you to change your fuel type in seconds! The digital multimeter displays voltage, frequency, total hours run, and hours until the recommended maintenance. Duel Fuel: This generator runs on gasoline or propane, giving you the freedom and flexibility of fuel choice. Why Dual Fuel? Learn more about Dual Fuel technology Equipped with Co Alert: Equipped with DuroMax CO Alert technology that will automatically shut down the generator if an unsafe level of carbon monoxide is detected. Built using a powerful 439cc OHV DuroMax engine and features ALL COPPER WINDINGS designed to make your generator last for years. Powerful: The fully loaded power panel includes four 120V GFCI household outlets, one 120V 30AMP outlet, one 120/240V 30AMP twist-lock outlet, and a heavy-duty 120/240V 50AMP outlet making it transfer switch ready! Onboard the XP10000HX are individual circuit breakers, idle control, and a low oil sensor. Included Oil Funnel Spark Plug Wrench Tool Set Wheel & Handle Kit Propane Regulator Ownerâ??s Manual Specifications (POWER) GASOLINE Peak Watts: 10,000 Running Watts: 8,000 Peak Amps @ 120V: 83.33 Running Amps @ 120V: 66.67 Peak Amps @ 240V: 41.67 Running Amps @ 240V: 33.33 PROPANE Peak Watts: 9,500 Running Watts: 7,600 Peak Amps @ 120V: 79.17 Running Amps @ 120V: 63.33 Peak Amps @ 240V: 39.58 Running Amps @ 240V: 31.67 PRODUCT SPECIFICATIONS Amperage: 66.67A / 33.33A Voltage: 120V / 240VAC & 12VDC Frequency: 60 Hz Engine Size: 439 cc Engine Type: 4-Cycle Air-Cooled Spark-Ignition Engine Speed: 3600 rpm Fuel Type: Gasoline / Propane Fuel Tank Capacity (Gasoline): 8.2 gal. Suggested Tank Size (Propane): 40 lbs. Runtime (Gasoline) at 50% Load: 10.4 hrs. Runtime (Propane) at 50% Load: 8.6 hrs. Start Type: Electric / Recoil Volume Level: 72 dB EPA Certified: Yes CARB Certified: Yes Product Dimensions: 29" L x 30" W x 26" H Product Weight: 228 lbs.
Go green and cut clean with the 13 Amp 16 in. An alternative to traditional gas operated mowers, this electric powered mower is environmentally friendly and maintenance free with no gas, oil, filters or spark plugs. This portable and light weight mower is just 32 lbs. and has collapsing handles for quick and easy storage The single point height adjustment allows you conveniently adjust the height of your deck from 1 - 2-1/2 in. Details Voltage (v) 120v Size of Yard 1/4 - 1/2 Acre Power Type Corded Electric Engine Make OEM Branded Engine Rear Wheel Height (in.) Low Wheel Additional Tools Included No Additional Tool Amperage (amps) 13 A Assembly Required Yes CA (CARB) Compliant CARB Compliant Cutting Height Options 5-position Cutting Options Bag,Mulch Deck Material ABS Plastic Deck Type Fabricated Engine Torque (ft.-lb.) 0.0 Lawn Mower Type Push Mower Maximum Cutting Height (in.) 2.64 in Minimum Cutting Height (in.) .866 in Minimum extension cord rating 12 gauge Mower Size Type Standard Number of Blades 1 Number of Handlebar Positions 1 Recommended Terrain Flat Refurbished No Start Type Push Button Start Tools Included Mower Walk Behind Mower Type Manual Push Certifications and Listings UL Listed Assembled Depth (in.) 53 in Assembled Height (in.) 40 in Assembled Width (in.) 17 in Blade Length (in.) 16 in Cutting Width (in.) 16 inches Front Wheel Size (in.) 6 Maximum extension cord length (ft.) 50 ft Mower Deck Width (in.) 16 in Rear Wheel Size (in.) 7
CALIFORNIA AIR TOOLS 15020CR ULTRA QUIET & OIL-FREE 2-HP 15-GALLON STEEL TANK AIR COMPRESSOR Price:$730.55 SKU:CAT-15020CR Brand:california air tools Condition:New Weight:1.00 LBS Shipping:Calculated at checkout Product Description Features Quiet, Oil-Free and Powerful Continuous Series 110V Air Compressor Designed to be one of the quietest 2-HP in the industry Less service and maintenance along with at least 30% less noise Handles up to 8 hours of continuous running at 90 PSI & 12 hours at 40 PSI or below Dual Head Single Piston Pump w/ Teflon Coated Piston Rings Engineered for high performance and durability Can handle a variety of temperatures along w/ cold starts Single axis ceramic coated aluminum cylinders reduce wear & noise 3000+ hour life cycle before wear; comparable units are 500 hours or less Reliable 2-HP Ultra Quiet Motor Large cooling fan allows for a cooler operation Operates at 1680 RPM creating less noise and less wear Increases duty cycle and allows for longer run times Rated at 67 decibels; about the same as a normal conversation 15-Gallon Steel Air Tank Just the right size for shop, warehouse or factory Time to fill tank from empty to full â?? 150 Seconds Recovery time from 90 PSI to 120 PSI - 40 seconds 5 Micron Air Filter & Regulator Removes dirt, dust, and moisture for better tool operation Perfect for all types of continuous tools; spray guns & sanders Regulator maintains constant outlet pressure for tools; 1/4â?? quick connect Thermal Overload Protector Protects the motor from overheating Low amp draw at only 19.5 amps (30 amp breaker required) Creates less heat which dissipates more efficiently to prevent overloading Condor Pressure Switch Regulates air pressure in the compressor Large easy-to-read double pressure control gauges Great for a wide range of garage & workshop projects Specifications Engine HP 2 Motor Voltage 110 Volt AC Phase 1-Phase Magnetic Starter No Amp Draw 19.5 Recommended Breaker 30 Amp Breaker dBA 67 Pump CFM 4.90 CFM Rated @ 90 PSI CFM @ 40 PSI 5.80 Pump Material Aluminum Pump Type Single-Stage Max PSI 120 PSI After Cooler No Pump Drive Direct Drive Oil Type Oil Free Tank Tank Size 15 Gallons Tank Outlet 1/4 Inch Electronic Drain Valve No Tank Orientation Vertical Accessories Pressure Gauge Yes Air Dryer No Air Filter Yes Overview Weight 119 Pounds Product Length 22 Inches Product Width 22 Inches Product Height 40 Inches
Atmospheric Plasma Cleaning System chain conveyor Environmentally friendly molecular-level surface cleaning enhances uniformity and hydrophilicity, making it an ideal pre-treatment for bonding processes. Product advantages: 1. Significantly improve surface hydrophilicity and enhance bonding 2. Remove surface oil, fingerprints and other organic contamination horizontally, 3. Board walking speed 2~5 meters/minute 4. Double-sided processing is possible, and equipment can be customized according to production capacity 5. Processing under atmospheric pressure, no special gas is required, and installation and use are simple Product Specifications: 1 Dimensions L*W*H:1200*1150*1150 - 1500mm 2 Power supply Single-phase 220V, 50/60HZ, 12A 3 Conveying method Roller conveyor, chain conveyor, belt conveyor 4 Working environment Temperature: -10~40, relative humidity: 50%~93% (non-condensing) 5 Plasma generator 500-700W adjustable; optional 700-1200W (high power version) High power version is suitable for 50mm and 70mm spray guns @25-40KHz 6 Working gas Water-free and oil-free compressed air; optional argon, nitrogen, etc. 7 Effective processing Width 500mm, double-sided processing (optional), the number of rotating nozzles is optional 8 Rotating spray gun Processing width diameter: 50mm, optional 70, 30, 20mm 9 Support plate thickness < 3mm (special specifications of thick plates require special customization of the equipment) 10 Processing speed 2.0m/min ~ 5.0m/min 11 Cooling method Air cooling, factory exhaust > 400m3/h 12 Control system PLC+HMI
Features for the Husqvarna Z254F Ergonomic control panel The ergonomic control panel places everything conveniently at your fingertips. Removable foot plate The unique tube style chassis features a removable foot pan for easy access to the top of the cutting deck. Anti-slip foot area The footrest area incorporates generous non-slip surfaces for safe and comfortable use. Bumper The integrated front guard/ bumper offers bold styling while protecting the nose of the unit. An optional bright LED headlight kit can easily be added, providing improved visibility in dark conditions. Refinement Rubber bellows offer a refined look and prevent debris and moisture from entering the control system. Comfortable Seat The thick padded seat and soft outer cover offers superior support and comfort, while the open back gives added ventilation. Specifications Capacity Speed forward max: 6.5 mph Speed forward min: 0 mph Cutting deck Cutting width: 54in Cutting deck type: ClearCutâ?¢ - Fabricated Cutting methods: Collect/Mulch/Side discharge Cutting deck material: Steel Deck thickness: 10 gauge Cutting height steps: 6 Blade engagement: Electric clutch Clutch rating: 87 ft.lb Blades: 3 pcs Anti-scalp wheels: 6 Nose roller: No Deck lifting system: Manual, hand operated Powder-coated cutting deck: Yes Spindle/mandrel type: Cast iron Greaseable mandrels: Yes Deck Wash Port: Yes Cutting height, min-max: 1.5-4 in Dimensions Base machine, length: 75 in Base machine, height: 40 in Base machine, width (chute down): 67 in Base machine, width (chute up): 56 in Weight: 595 lbs. Tire size, front Width: 5 in Tire size, front Diameter: 11 in Tire size, front Diameter wheel: 6 in Drive System Transmission type: Hydrostatic Transmission manufacturer: Hydro-Gear Transmission manufacturer: Hydro-Gear Pump displacement: 10 cm�³ Fan-cooled pumps: Yes Engine Motor/engine manufacturer: Kawasaki Engine name: FR Series Power output: 24 hp Cylinder displacement: 726 cm�³ Cylinders: 2 Engine cooling: Air Air filter type: Auto-type Paper Power/fuel type: Gasoline Engine lubrication type: Full pressure with oil filter Oil filter: Yes Fuel tank volume (with reserve): 3.5 gal (US) Fuel tank location: Side (Single) Equipment Seat material: Vinyl Seat spring: Yes Seat back height: High Hour meter type: Digital with pre-programmed service intervals Cup holder: Yes Hinged armrests: Standard ROPS: No Seat type: Comfort high back
Xiongcai Motor Controller Has Been Introduced By The Largest Auto Fuel Pump Manufacturer 1. Voltage DC16~36V 2. Rated Current 10A 3. Working Temp -40 85 4. Working Humidity 95% 5. Size: 87*84*15mm 6. Protection under voltage, over voltage, low temperature, over temperature, plugging, reverse connection, short circuit 7. PWM speed regulation Xiongcai Technology tends to be at the leading edge of technological development of motor controller for automotive Fuel Pump. XIONGCAI TECH is one of the few manufacturers that focus on motor controller (electronic speed control or ESC) only, especially for automotive fuel pump. In 2017, ACHR Electrical Machinery, a company specialized in design and manufacture of automotive fuel pump. They contacted us and inquired about motor controller for their products. The client was really picky and particular, their engineer team set a standard on protection measure beyond the industry because this product is designed for the greatest automobile engine group in China�¢??FAWDE. They said they had met several suppliers, some items of the standards were unacceptable, because if all items met this extremely high standard, the cost would exceed cost budget. Xiongcai team wanted to give a shot. Xiongcai R&D team designed a combination of software and hardware meticulously called XCA105, making all parameters up to customer�¢??s standard. After one year test and verification, Xiongcai XCA105 motor controller for fuel pump was approved. The client has introduced this product for 6 years till now. Xiongcai RD team designed perfect protection measures to protect the motor. a. Peak current limit. This measure will limit the peak current to avoid damage to motor; b. Single PWM periodical current detection limit reduces impact of pulse current to motor; c. Waterproof is designed for all weather condition, up to IP67. The ESC is potted in epoxy to protect the electronics and improve heat transfer, enabling motor controller working in any condition at a lower temperature; And more protection measures including under voltage, over voltage, over current, low temperature, over temperature, plugging, reverse connection, short circuit protection. Furthermore, XCA105 motor controller was certified by CSIPER25, ISO11452-2, ISO10605, ISO16750, ISO7637. We are one of the few engineering companies providing a full service from design to supply of product, including design, analyze, test and supply finished products. Xiongcai is serving top clients in auto industries, ACHR, Jingyi Group, Risun, FAW Group, FAWDE, Feilong Auto(FLACC), Keshen, Unicent and more. Contact us Shenzhen Xiongcai Technology Co., Ltd for detail. We try to assist you in achieving your idea.
Perkins Diesel Engine, Diesel Generator set 50HZ/1500RPM, 380/220V, 400/230V, 415/240V can be adjustable, Open Type, weatherproof type or soundproof type, trailer type and so on. Also have 60HZ/1800RPM, voltage is 220/127V, 380/220V, 440/254V can be option There are Perkins from China, UK, USA and india, all depend on the required model. ATS can be option Controller brand: UK Deepsea, Czech ComAp, Denmark DEIF, Smartgen China Generator Standard Compose: Meet the environmental temperature 40 water tank radiator, Driving belt cooling fans, with fan safety shield 24 V charging generators Generator: Single bearing generator, IP23 Grading Protection, H Insulation degree Shock absorber Dry air filter, Fuel filter, Oil filter Power output circuit breaker Standard control panel 12 V battery and battery connection cables Battery Charger Exhaust pipe, Bellows, Flange, Muffler set 8 hours base tank Documents and Manuals Generator set Genset Model AP1100 Rating Power (KW/KVA) 800/1000 Standby Power(KW/KVA) 880/1100 Rating Ammeter(A) 1519 Diesel Engine Engine Model 4008TAG2 Prime Power(KW) 899 Standby Power(KW) 985 Bore X Stroke (mm) 160X190 Number of Cylinder & Configuration 8 in line Displacement (l) 30.6 Compression Ratio 13.6:1 Aspiration Turbocharged & After-cooled Max. intake depression(kPa) 6 Combustion air Volume(m³/min) 70 Max. Exhaust back Pressure(kPa) 10 Exhaust Gas Flow(m³/min) 201 Max. Exhaust Gas Temperature() 485 Cooling Water cooled with Radiator Fan cooling air flow(m³/min) 1074 Total Coolant capacity(l) 188 Max. temperature of coolant() 93 Max. permissible oil temp.() 105 Total oil capacity(l) 166 Rating Fuel Consumption(l/h) 215 Governing Type Electrics Governor Alternator Rating Voltage(V) 380/220 (adjustment) Alternator Model TAL-A49-E Rating Capacity(KW/KVA) 800/1000 Eff.% 94.2% Power Factor 0.8 lagged Exciting type Brushless PMG exciter, AVR Voltage regulation ±0.5% No. of Phase 3 phase 4 wire Enclosure Class IP23 Class of Insulation H Battery Rating Capacity(AH) 4X150AH 12V Generator set dimension (LXWXH) 5300X1870X2500 mm Weight (kg) 7900 FAQ Q: Do you offer OEM service? A: Yes Q: What is your payment term? A: 30% T/T in advance, 70% balance when receiving B/L copy, Or 100% irrevocable L/C at sight. Q: What is your lead time? A: About 15-25 days after receiving advance deposit or original L/C. Q: What certificates do you have? A: We have ISO And we can apply for specific certificates for different countries such as SONCAP for Nigeria, COI for Iran, SASO for Saudi Arabia, etc. Q: What warranty do you provide? A: One year or 1200hours running whichever occurs first, during the guarantee period, we will supply free of the easily damaged parts for the possible problems except for the incorrect operation. After expiration, we supply cost spare parts for Genset maintenance.
Xiongcai Water Pump Motor Controller Approved by The Biggest Water Pump Manufacturer In China. 1. Voltage DC16~36V 2. Rated Current 4.6A 3. Working Temp -40 125 4. Working Humidity 95% 5. Size: 61*56*17mm 6. Protection under voltage, over voltage, low temperature, over temperature, plugging, reverse connection, short circuit 7. PWM speed regulation Xiongcai Technology has been specializing in motor controller since 2011, we engineer, analyze, test and supply finished products. At present, in China, most of manufacturers provide OEM service only, they don�¢??t support you in technology, but just provide OEM. We serve you from initial concept to product supply. Unicent Automotive Tech, a company focused in automotive thermal management, contacted us and inquired ab out motor controller for automotive water pump. They have high requirements on reliability, performance and safety. They said they had met several suppliers, some items of the standards were unacceptable, because if all items met this extremely high standard, the cost would exceed budget. Xiongcai team wanted to give a shot. R&D team designed a potent combination of software and hardware meticulously, called XCA107 with power system of 4.6A, DC16-36V, making parameters up to the customer's requirements. After one year test and verification, XCA107 motor controller for water pump was approved. The client has introduced this product for 4 years till now. XCA107 Motor Controller For water pump provides protection measures including under voltage, over voltage, over current, low temperature, over temperature, plugging, reverse connection, short circuit. That means this product would stop when the protection measure is triggered, but never be damaged. Furthermore, this product is certified by CSIPER25, ISO11452-2, ISO10605, ISO16750, ISO7637. You don�¢??t need to worry about the reliability. We are one of the few engineering companies providing a full service from design to supply, and serving top clients in auto industries, such as NISSAN, XPeng, Jingyi Group, Risun, FAW Group, FAWDE, Feilong Auto(FLACC), Keshen, Unicent and more.
Centrifugal Air Blower Centrifugal Air Blower For Sale Centrifugal air blowers adopt three core high-end technologies: "ultra high-speed direct connection motor", "air suspension bearing", and "high-precision single-stage centrifugal impeller", creating a new era of high efficiency, high performance, low noise, and low energy consumption fans. It is a new generation of high-tech civilian products developed with great dedication based on the design experience of aviation turbomachinery. Features 1. Energy saving and high efficiency The air suspension centrifugal blower uses air bearings, direct connection technology, a high-efficiency impeller, a permanent magnet brushless DC motor, and no additional friction. The fan automatically adjusts the consumption of motor power based on the output (adjustable range of air volume 40-100%) to maintain the high efficiency of equipment operation. 2. No vibration, low noise Adopting air bearings and direct connection technology, there is no vibration generated, and the fan does not need to be equipped with sound insulation devices; The equipment is lightweight and does not require a special foundation. The installation and layout are simple and flexible. 3. No lubricating oil The fan adopts air-bearing technology, and the system does not require a lubricating oil system, providing clean air to special industries such as electronics, medicine, and food. The operating temperature of the air bearing has reached 600 degrees, and all the drawbacks of the oil-based bearing system have been successfully resolved. 4. No maintenance Without the necessary gearbox and oil bearings for traditional fans, our series of high-tech impellers and motors are directly connected without couplings. The intelligent control system and key components use AL7075 (aviation aluminum). These technologies ensure that the equipment is maintenance-free, reduce maintenance costs for users, and improve the stability of the gas supply system operation. 5. Convenient operation control Self-checking and constant pressure operation, load/no load operation, overload control, and unmanned operation can be achieved on a personal computer for fan speed, pressure, temperature, flow rate, etc. The fan adjusts the flow rate by adjusting the speed of the impeller. Adjusting the speed can easily adjust the flow rate based on the temperature and pressure changes of the inhaled air. It can automatically and manually adjust the flow rate. 6. Small device installation space The air suspension centrifugal blower equipment is lightweight, small in size, easy to install, and can significantly save users on building and auxiliary electrical control system investment.
The All New "SaveOil" Bypass Oil Filtration technology. Clean and purified Oils do "not" need changing.! By removing contamination, fine particles as small as 1 micron, and "liquids" such as water, fuel, glycols, acids, etc., your Oils (both Engine Oils and Hydraulic Oils), will remain serviceable and in good working condition for much, much longer periods. The SaveOil Bypass Oil Filtration technology will ensure that your Oils (Engine and Hydraulic) will remain in top condition. Just change the Filters, not the Oils.!! The SaveOil Filter will collect solid particles down to 1 micron, and the patented Evaporation Heating chamber will remove the liquid contaminants. This special technology will save you money;!! All hardworking engines need to be regularly serviced to ensure that the engine Oils are doing their slippery best to maintain the integrity of the engine moving parts; the problem with oils is that they get dirty and the current filtration systems, do not keep the Oils clean as they only filter out particles in the 25 to 35 micron range and above.! Therefore filters have to be changed and oils have to be replaced, which is expensive.! BUT, with the SaveOil Bypass Filter technology, you do NOT change the Oils, you only change the Filters.!! Please Download Brochure! By using our SaveOil Bypass Oil Filtration system, you will ensure that the existing Engine Oils will have a much longer life span, due to the unique features of the SaveOil Bypass Oil Filtration Technology; - The special Cotton Filter will filter out particles as small as 1 micron.! - The special Evaporation Heating Chamber removes damaging water, fuel, acids, glycol, etc. Advantages of the SaveOil Bypass Oil Filter: Diesel FUEL savings: because our filtration system keeps the Engine OILS clean and retaining high lubricity, we are achieving a 4% to 8% fuel efficiency in the running of these Engines; this gives significant cost savings over the operating life of your Engines. Engine OIL savings: our superior filtration, together with our patented Evaporation of liquids technology, keeps the Engine OILS clean and pure for a much longer and extended period; this means that the Engine OIL is being used longer, allowing for greater Environmental benefits of reduced OIL consumption and less pollution from the waste old OIL.!!
The FANGPOWER SW570-1 POWERMAX 2 Seats ATV: A Comprehensive Overview of the 499cc ATV The FANGPOWER SW570-1 POWERMAX 2 Seats ATV is a robust and powerful all-terrain vehicle designed for both adventure and utility. With its spacious design and advanced features, it offers a comfortable and thrilling ride for two. Hereâ??s an in-depth look at what makes the FANGPOWER SW570-1 POWERMAX a standout choice in the ATV market. Engine and Performance Engine Type: Single-cylinder, 4-stroke liquid-cooled, 4 valves SOHC Displacement: 499cc Bore x Stroke: 92�?75 mm / 3.62�?2.95 in Max Power/RPM: 29Kw (6750�±500r/min) Horsepower: 39.4HP Max Torque: 44N.m (6000�±500r/min) Fuel Supply: DELPHI EFI Transmission: CVT Compression Ratio: 10.3:1 Spark Plug Type: DCPR7E (or NGK) Max Speed: 85 km/h Ignition and Starting System Starting Type: Electric start Battery Capacity: 12V20Ah Brakes and Suspension Front Brakes: Four-wheel hydraulic discs Rear Brakes: Four-wheel hydraulic discs, rear wheel parking Parking Brake: Hand-actuated Front Suspension: Double A-arm independent suspension Rear Suspension: Double A-arm independent suspension Front/Rear Shock Absorber: Coil spring oil damping Suspension Travel: Front: 166 mm / 6.54 in Rear: 172 mm / 6.77 in Design and Comfort Dimensions (L x W x H): 2200�?1180�?1270 mm / 86.6�?46.5�?50 in Wheelbase: 1370 mm / 53.9 in Seat Height: 900 mm / 35.4 in Front/Rear Track: 970 mm / 38.2 in Ground Clearance: 280 mm / 11 in Min. Turning Radius: 8000 mm / 314 in Drive System: 2WD/4WD/Front differential lock Gear Shift/Order: Manually / Pâ??Râ??Nâ??Hâ??L Tires and Wheels Front Tires: ATV 25�?8-12 Rear Tires: ATV 25�?10-12 Rim Front: 12�?6.0 cast aluminum Rim Rear: 12�?8 cast aluminum Capacity and Weight Dry Weight: 365 kg / 804 lbs Gross Weight: 425 kg Front Rack Capacity: 20 kg / 44 lbs Rear Rack Capacity: 40 kg / 88 lbs Payload: 205 kg Pulling Load: 150 kg / 330 lbs Tongue Weight: 30 kg / 66 lbs Fuel Capacity: 20 L / 5.28 gal Packaging and Shipping Package Size: 2270�?1150�?843 mm Loading Quantity: 20FCL: 10 PCS 40HQ: 30 PCS Conclusion The FANGPOWER SW570-1 POWERMAX 2 Seats ATV is an exceptional vehicle designed for those who demand power, comfort, and versatility. Its advanced engine, comprehensive suspension system, and spacious design make it ideal for both recreational adventures and practical utility. With a variety of color options and robust capabilities, the SW570-1 POWERMAX promises a superior riding experience for all types of terrains.
