Introduction The ARLE series micropore filter cartridge is made of PES micropore membrane as the filtration medium. The uniquely shaped and evenly distributed micropores cover more than 85% of the membrane area, ensuring high filtration efficiency and stability. This product exhibits excellent hydrophilic, is free from surfactants, and features efficient antibacterial properties, low adsorption, high mechanical strength, as well as resistance to high temperatures and pressures. It can withstand multiple cycles of steam sterilization. The double-layer filter membrane formula can better improve the filtration effect. All products have passed the integrity test of the instrument. Specification Filter material: PES micropore filter membrane (single / double Layer) Diameter: 69, 83 mm Pore size: 0.1 ~ 1 micron Length: 5" ~ 60" Interface type: 222, 226, 215, 213, DOE Gasket/O-rings: Silicone, EPDM, NBR, Viton, wrapped in PTFE Application Suitable for terminal filtration in pharmaceutical, biological products, microelectronics, semiconductor, chemical and other industries.
Introduction The ARSP series micropore membrane filter cartridge is made of PP microfiber as the filtration medium. The product is formed by folding the combination of multi-layer filter membranes, achieving a stable deep filtration effect. In order to meet the market demand for high-flow filtration, the product increases the effective filtration area of the membrane. It has the characteristics of high flow rate, long service life, stable structure and wide chemical compatibility, which are conducive to enhancing the filtration efficiency of liquids. It is mainly used for liquid filtration in large-scale LCD and touch panel processes, such as substrate cleaning, stripping, etching, developer and deionized water rinsing, etc. It also meets the demand for large flow rates in the chemical and food industries. Specification Filter material: PP micropore filter membrane Diameter: 131 mm Pore size: 0.1 ~ 60 micron Length: 10" ~ 60 " Interface type: 334 Gasket/O-rings: Silicone, EPDM, NBR, Viton, wrapped in PTFE Application Electronics industry: Wet processing of LCD and touch panels, semiconductor process, wet equipment chemical reagent Chemical industry: Chemical solvents Food industry: Beverage, alcohol
Introduction The ARLP series micropore filter cartridge is made of PP microfiber as the filtration medium, and the filtration material meets the relevant FDA requirements. The product is formed by folding the combination of multi-layer filter membranes, achieving a stable deep filtration effect. Its main features include low filtration resistance, high dirt-holding capacity, long service life, stable structure, wide chemical compatibility, etc. It is suitable for pre-filtration of various liquids. Specification Filter material: PP micropore filter membrane Diameter: 69 mm Pore size: 0.1 ~ 60 micron Length: 5" ~ 60 " Interface type: 222, 226, 215, 213, DOE Gasket/O-rings: Silicone, EPDM, NBR, Viton, wrapped in PTFE Application Primary filtration of filtration systems in the pharmaceutical, chemical solvent, food and beverage, microelectronic industries, pure water systems, petrochemical and other industries.
Introduction The filtration medium of ARWP series micropore membrane filter cartridge is made of PP superfine fiber membrane. It is formed by folding the combination of multi-layer filter membranes and thermally welding into 6-inch large diameter structure, providing large filtration area for stable deep filtration effect. This product is available in both external and internal pressure types, featuring high efficiency retention and high liquid flux, widely used in security filtration and pre-filtration across various industries. Specification Filter material: PP micropore filter membrane Diameter: 6" (152mm) Pore size: 1 ~ 80 micron Length: 20", 40", 60" Interface type: Multiple interface selections Gasket/O-rings: Silicone, EPDM Application General industry: Filtration of workshop water for various production processes, etc. Electronics industry: Pre-filtration for reverse osmosis systems, pre-filtration for deionized water, etc. Power plants: Filtration of makeup water, condensate water, cooling water, wastewater treatment, etc.
Introduction The ARTX series filter cartridge uses high-quality polyacrylonitrile as the raw material, which is high-temperature carbonized into powdered fibers in a high-purity inert gas environment. Through special formulation and surface design, it enhances the ability to adsorb suspended solids and precipitated particles in liquids, achieving deep filtration effect. This product performs excellently in chlorine removal, purification and decolorization, adsorption of organic compounds and metal ion removal. Specification Filter material: Powdered activated carbon fiber Length: 5" ~ 40" Pore size: 5 ~ 100 micron (multi-micropore combination) Diameter: 65 mm Interface type: DOE Gasket/O-rings: TPE Application Chemical industry: Air purification, organic solvent decolorization Drinking water: Chlorine removal, odor removal, water purification Electronics industry: Water treatment purification, PCB electroplating, semiconductor FRAME electroplating solution, copper-nickel electroplating solution filtration, etc. Food industry: Filtration for beverages, clarification of wines, etc.
Introduction The common materials of ARLD series filter bags include PE, PP, NMO, and PTFE. This series of products utilizes sewing or hot-melt technology, and the surface is heat-treated at high temperature to effectively prevent fiber shedding. The uniform filter layer has highly efficient filtration of solid and colloidal particles. The high-strength filament fibers enable high flow rate and strong dirt-holding capacity, ensuring stable structure. The filter bags are made of different materials with different chemical corrosion resistance and heat resistance properties, widely applied in primary liquid filtration in various industries. Specification Filter material: PE, PP, NMO, PTFE Pore size: 0.5 ~ 300 micron Filter bag size: Various specifications can be customized Collar ring material: PP, stainless steel Application Pharmaceutical industry: Filtration of various liquid medicines, traditional Chinese medicine preparations, antibiotics, injection bottle washing water Food industry: Filtration of food, beverages, alcohol, drinking water Chemical industry: Filtration of chemical solvents, paints, coatings, inks, adhesives, printing and dyeing pigments, metal cutting, etc.
Introduction The ARRP series filter cartridge uses odorless and non-toxic PP as raw material. It is formed into a tubular filter cartridge through a process involving heating, melting, spinning, pulling, and molding. This product adopts a progressive process and a design of outer sparse and inner dense, which can maintain a stable flow rate and show excellent deep filtration effect. Its main features include low resistance, high dirt holding capacity, corrosion resistance and strong chemical compatibility. Specification Filter material: PP Diameter: 61 ~ 114 mm Pore size: 1 ~ 100 micron Length: 5" ~ 60" Interface type: 222, 226, 215, DOE Gasket/O-rings: Silicone, EPDM, NBR, Viton, wrapped in PTFE Application Suitable for solution filtration of larger particles in various industries. Widely used in PCB, electroplating solution, pure water engineering, food and drinking water pre-filtration, etc.
Introduction The ARBP series micropore membrane filter cartridge is made of polypropylene microfiber as the filtration medium. The product is formed by folding the combination of multi-layer filter membranes, achieving a stable deep filtration effect. Its large diameter design increases the filtration area, effectively reducing the quantity of filter cartridges used and the frequency of replacements, thereby lowering production costs. Due to its high flow rate and large dirt-holding capacity, this product is widely used in the filtration of liquid chemicals in the manufacturing process of LCD and touch panel, such as substrate cleaning, stripping, etching and deionized water rinsing. Specification Filter material: PP micropore filter membrane Diameter: 83 mm Pore size: 0.1 ~ 60 micron Length: 10" ~ 60 " Interface type: 226 Gasket/O-rings: Silicone, EPDM, NBR, Viton, wrapped in PTFE Application Electronics industry: Wet processing of LCD and touch panels, semiconductor process, wet equipment chemical reagent Chemical industry: Chemical solvents
Introduction The honeycomb wire wound filter cartridge mainly uses PP, degreased cotton, and glass fiber as raw materials. a.The ARXF series honeycomb filter cartridge is mainly made of a PP reinforced skeleton and PP fiber threads by winding. b.The ARXT series honeycomb filter cartridge is made of degreased cotton utilizes yarn spun from processed and degreased natural cotton, wrapped around a PP or stainless steel porous skeleton. c.The ARXB series honeycomb filter cartridge, constructed with a stainless steel porous skeleton wrapped with glass fiber threads, is resistant to strong acids and alkalis, capable of withstanding temperatures up to 200 degrees Celsius, and suitable for filtration in environments with strong acids, strong alkalis, high temperatures, and high pressures. This series of products adopts a honeycomb structure with outer sparse and inner dense, which can effectively remove suspended solids and large particles of impurities in liquids. Specification Filter material: PP/degreased cotton/glass fiber Support frame material: PP/stainless steel Pore size: 1 ~ 100 micron Length: 5" ~ 60" Diameter: 61 ~ 105mm Interface type: 222, 226, DOE Gasket/O-rings: Silicone, EPDM, NBR, Viton, wrapped in PTFE Application Chemical industry: Filtration of electroplating solutions, chemical raw materials, coating solutions. Electronics industry: Pre-filtration of circuit board production line.
Production AR series PP precision filter is a professional filter developed and designed for the electronic componentsand chemical industry.The main body of the filter is made of PP material for injection molding. The main characteristics are acidand alkali resistance,high temperature resistance, corrosion resistance, idling resistance, no leakage, lownoise, high efficiency, wide filtration area, simple operation, easy cleaning and long service life. lt is widelyused in terminal filtration of electronic components and chemical industry. Item No.: AR-2005 Application: PCB, LED, Electroplating solution, organic solvent filtration Material: Polypropylene Product Size: 760*1420 mm Max Flow Rate: 150 L/mins Weight: 19.78 KG Filter cartridge Size: 20" X 5
Introduction The ARXS series portable filter housing is constructed from stainless steel materials (SUS316L or SUS304). Its design is reasonable with a well-compacted structure. Depending on the specific requirements such as filtration media, temperature range and filtration accuracy, different types of filter cartridges can be selected accordingly. Because of its small size, the product is easy to install and clean, especially suitable for small factories, hospitals, hotels, household water filtration, etc. Specification Material: SUS304, SUS316L Filter type: Liquid Length: 10", 20" Filter specification: Single core Application Suitable for hospital water, household water, hotel water and small factories.
Our company provides all kinds of new and old PDC bit, roller bit, drill pipe, drilling jack, elevator tong and other drilling tools
Residential ornamental steel fence, steel fence, fence, steel fence panels, ornamental fencing, ornamental steel fencing, aluminium fence panel, colorbond panel, aluminium fence, industrial ornamental steel fence, swimming pool fence, zinc steel guardrail, guardrail accessories, post and accessories.
Petrochemical steel and metal ore and building materials.
Steel making & ferroalloy equipment, ferroalloy furnace.Design, manufacturing, erection, and commissions
Hardware, Steel/ Brass Items, Handicrafts, Upholstery..
Used Railway Track Scraps And Steel Supllier..
Iron, wooden, steel, and brass handicraft items.
Epoxy resin, iron and steel, global construction materials.
Authentic non magnetic stainless steel gas stove.We are proud to be one of bangladesh's most well established gas stove manufacturers, specializing in ss non magnetic stoves. additionally, we offer a range of glass top and built in stoves. we are honored to have been recognized by export promotion bureau (epb) of bangladesh with awards for three consecutive years, including gold medal for being the top performer in their program. our dedicated export team ensures seamless international shipments.
