EX02002-A01 is a 2.0inch, IPS TFT LCD module with transmissive mode. Its resolution is 480 360dots (480 vertical by 360 horizontal pixel) and every pixel is made up of three vertical strips of Red, Green and Blue dots. This miniature 2.0 inch TFT module has built-in IC ST7701S supporting MIPI serial interface. The brightness is 250 cd/m2 with contrast ratio 1000:1.Operating temperature covers from -20~+70, storage temperature range is from -30~+80.This single-display module is suitable for use in industry, household appliances, toys and medical treatment,etc. General Specifications of 2.0 Inch 480x360 HVGA 24PIN MIPI IPS 250nits No. Item Specification 1 LCD size 2.0inch 2 Resolution 480(RGB)360 3 Active area 40.8(W)30.6(H) 4 Module size 49.1(W)45.96(H)2.53(T)(Exclude FPC)mm 5 Interface MIPI1 6 Polarizer Transmissive 7 Brightness 250cd/m2 8 Pixel arrangement RGB vertical stripe 9 Back Light 450cd/m² 10 Viewing Direction All 11 Contrast Ratio 1000:1 As a professional china lcd module manufacturer, we provide china lcd display panel, dsi tft display, dsi tft, dsi lcd panel, mipi dsi lcd panel, mipi lcd panel, mipi tft, hvga lcd, hvga tft, etc. For more information, please feel free to contact us!
1) Good hygienic performance: PE pipe processing without adding heavy metal salt stabilizer, non-toxic material, no scaling layer, no bacteria, a good solution to the secondary pollution of urban drinking water. 2) Good corrosion resistance: Except for a few strong oxidants, it can resist the erosion of various chemical media; no electrochemical corrosion. 3) Long service life: Under rated temperature and pressure conditions, PE pipeline can be used safely for more than 50 years. 4) Better impact resistance: PE pipe has good toughness, high impact strength, heavy objects directly pressed through the pipeline, will not lead to pipeline rupture. 5) Reliable connection performance: PE pipe hot-melt or electric-melt interface strength is higher than the pipe body, the joint will not be broken due to soil movement or live load. 6) Good construction performance: light pipeline, simple welding process, convenient construction, low comprehensive cost of the project. Pipeline Connection: 1) Electric-thermal weldability: The straight pipe and straight pipe, straight pipe and pipe fittings are connected by special electric-thermal welder. Usually used for pipes under 160mm. 2) Hot-melt butt joint: Use special butt welder pipe connection, generally used for more than 160mm pipes. 3) Steel-plastic connection: flange, thread and other methods can be used to connect. Application: Hesu Pipe Industry's high-performance high-density polyethylene water pressure pipes are suitable for municipal and industrial transmission systems for potable water, sewer, drain, mining, irrigation, and reclaimed water.
Plasma cutting machines are used for iron/steel plate cutting, if you have big size metal to cut, the portable and table type are all not suitable. You need choose gantry type plasma cutting machines, but it price is very high. So we design this kind plasma cutting machines that can cut big size iron/steel plate with good price. Features of plasma cutting machines: 1 .The machine is all welded as seamless steel structure. Steady structure and long life time 2. High configuration, high cutting speed and precision. 3., Auto ARC starting. Steady performance. 4, Control system: STARFIRE control, with USB interface 5. Cutting material: steel, copper, iron, aluminum, galvanized sheet, titanium plates, and so on. 6. File format: G-code 7, Suitable Software: CAD, ART CUT, Type, Art CAM etc Parameters of plasma cutting machines Working Voltage 3-Phase 380V/2-phrase 220V Working Area(X*Y) 2000*3000mm, 2000*4000mm, 2000*5000mm, 2000*6000mm Machine Structure Welded X Y Guide Rail Taiwan HIWIN Square Rail X Y Transmission Imported Rack gears Drive Mode Stepper Motor (Optional Servo ) Control System STARFIRE Max thickness 30mm Plasma Generator 63A/100A /120A/160A/200A Cutting Speed 0-10000mm/min G.W. 1500KGS
Linear Feeder operational principle: The linear feeder is a common automatic feeding equipment, and its working principle mainly involves two aspects: transmission mechanism and control system. In terms of transmission mechanism, linear feeders generally use hydraulic or electric methods to drive conveyor belts and transport materials from one location to another. In terms of control system, the linear feeder adopts PLC control, frequency conversion control, position control and other methods to achieve precise control of feeding speed, position, direction and other aspects. Application: Linear feeders are widely used in automated production lines, mainly for material conveying, positioning, distribution and other work. For example, in the manufacturing industry, linear feeders can be used on production lines in electronic products, automotive parts, mechanical parts, plastic products, and other fields to improve production efficiency, reduce labor intensity, and reduce labor input. They can also be used in packaging industry, logistics industry, and other fields, playing an important role in goods sorting, packaging, and other processes. Advantage: Compared to traditional manual feeding methods, linear feeders have the following advantages: 1. Improve production efficiency: The linear feeder adopts an automated method for material transportation, which can significantly improve production efficiency and reduce labor input. 2. Improve production quality: The linear feeder can accurately control the feeding speed, position, and other aspects when conveying materials, thereby improving the stability and accuracy of the production line and improving production quality. 3. Shortening the production cycle: Using a linear feeder can shorten the production cycle and improve the overall efficiency of the production line. 4. Reduce labor intensity: Using a linear feeder can reduce labor input, lower labor intensity, and improve work safety. 5. Cost saving: Using a linear feeder can reduce production costs and improve the profitability of the enterprise.
Features for the Champion 200989 - Generator Quiet Technology and Extended Run Time 61 dBA is great for RVs, tailgating, or camping with 4500 starting watts and 3500 running watts and up to 14 hours run time on only 2.3 gallons of gasoline. Parallel Ready The optional parallel kit (sold separately) enables this inverter to connect with another 2800-watt or higher Champion inverter to double your output power. Intelligauge with Power Meter Monitor voltage, frequency, and operating hours with ease, plus the EZ Start Dial simplifies startup while Economy Mode monitors power consumption in real time. Clean Power for Sensitive Electronics RV Ready with a 120V 30A RV, plus two 120V 20A household outlets with clean power (less than 3% THD) and two convenient USB ports. SPECIFICATIONS Gasoline Starting Watts : 4500W Gasoline Running Watts: 3500W Gasoline Starting Amps at 120V: 37.5A Gasoline Running Amps at 120V: 29.2A Volts: 120 Frequency: 60Hz Outlets: 120V 30A (TT-30R), Dual 5V 2.1A USB, 120V 20A Duplex (5-20R) GFCI Outlets: No Covered Outlets: Yes Covered Circuit Breakers: Yes Gasoline Run Time at 1/4 Load: 14â??h. Noise Level: 61â??dBA Inverter: Traditional Parallel Capability: Yes DC Operation: Yes Voltmeter: Intelligauge Automatic Voltage Regulation: No Battery: No Start Type: Recoil Engine Brand: Champion Engine Size: 212cc Engine Type: 4-stroke Engine Speed: Variable Fuel Type: Gasoline Fuel Gauge: Yes Gasoline Capacity: 2.3â??gal. Gasoline Tank Material: Steel Engine Oil Type: 10W-30 Engine Oil Capacity: 0.5â??qt. Engine Oil Included: Yes Low Oil Shut-Off: Yes Wheels: Yes Wheel Type: Solid Wheel Diameter: 5â??in. PGMA G300-2018 Compliant: No EPA Certified: Yes CARB Compliant: Yes DIMENSIONS Length: 23.2 in. Width: 17.7 in. Height: 20.1 in. Weight: 95.0 lb.
The High-Speed Laser Engraving & Marking Machine is a cutting-edge tool designed specifically for non-metal items in industries such as footwear, bags, garments, gifts, and decorations. This versatile machine combines high-speed engraving and marking capabilities, ensuring efficient and precise processing of a wide range of materials. High-Speed Engraving and Marking: This machine utilize advanced laser technology to deliver high-speed engraving and marking on non-metal items. It can swiftly create intricate designs, patterns, logos, and text with exceptional precision, providing fast and efficient production capabilities. Versatile Material Compatibility: The machine is compatible with various non-metal materials commonly used in the footwear, bag, garment, gift, and decoration industries. It can process materials such as leather, fabric, wood, acrylic, glass, plastic, and more. This versatility allows for a wide range of applications and creative possibilities. Large Working Area: With a spacious working area of 300*300 mm, this machine accommodates a variety of item sizes, allowing for efficient processing of different shapes and dimensions. Water Cool Chiller System: The integrated water-cooled chiller system helps maintain the optimal temperature of the laser and extends its lifespan. It effectively dissipates the heat generated during operation, ensuring consistent performance, and preventing overheating issues. This feature enhances the machine's durability and reliability. User-Friendly Interface and Software: The machine is equipped with a user-friendly interface and software, making it easy to operate for both experienced users and beginners. The software offers intuitive controls, allowing users to import designs, adjust parameters before starting the engraving or marking process. It supports various file formats, providing compatibility with different design software. Model No. BS - 6060 Working Area 600 mm x 600 mm Laser Power 80W Repetition Precision + 0.0001 mm The smallest Characters 0.8 mm Linear Making Speed 7000 mm/s Response Time 0.8 ms Cooling way Water cooled Working Temperature 0 - 45C Working Humidity 5-95%
ZL-2 model steam air heater with Left-Right Circulation is consists of 7 parts: steel-aluminum radiator fin tube + electric steam valve + drain valve + insulation box + fan+ Fresh air damper + electric control system. It is specially designed to support the left and right circulation drying room. For example, the 100,000 kcal model drying room, it is equipped with 6 fans, three on the left and three on the right. When the three fans on the left rotate clockwise, the three fans on the right rotate counterclockwise in a cyclic alternating manner, forming a relay, The left and right sides serve as air inlets and outlets alternately, taking out all the heat generated by steam heater. It is equipped with an electric fresh air damper to supplement fresh air in coordination with the dehumidification system in the drying room/drying place. 1.Simple structure and easy installation 2. Large air volume and small wind temperature fluctuation 3ï¼?Steel-aluminum finned tubes, high heat exchange efficiency. The base tube is made of 8163 seamless tube which is pressure-resistant and durable; 4. Electric steam valve controls the amount of inlet, automatically cuts off or opens according to the set temperature, so that can accurately controls the temperature. 5. High-density fire-resistant rock wool insulation box to avoiding heat loss 6. High temperature and high humidity resistant fan with IP54 protection rating and H-class insulation rating. 7. left and right fans run alternately in cycles to ensure even heating 8. Automatically replenish fresh air
DL-2 model electric air heater with Left-Right Circulation is consists with 6 parts: electric heater + inner tank + insulation box + fan +fresh air damper + control system. It is specially designed to support the left and right circulation drying room. For example, the 100,000 kcal model drying room, it is equipped with 6 fans, three on the left and three on the right. When the three fans on the left rotate clockwise, the three fans on the right rotate counterclockwise in a cyclic alternating manner, forming a relay, The left and right sides serve as air inlets and outlets alternately, taking out all the heat generated by electric heater. It is equipped with an electric fresh air damper to supplement fresh air in coordination with the dehumidification system in the drying room/drying place. Advantages/features 1. Simple structure and easy installation 2. Large air volume and small wind temperature fluctuation 3. Stainless steel electric heating finned tube, durable 4. Automatic control system, group start and close, low load, precise temperature control 5. High-density fire-resistant rock wool insulation box to avoiding heat loss 6. High temperature and high humidity resistant fan with IP54 protection rating and H-class insulation rating. 7. left and right fans run alternately in cycles to ensure even heating 8. Automatically replenish fresh air
TL-2 model Direct burning furnace is consists of 6 parts: natural gas burner + inner tank + insulation box + fan +fresh air damper + control system. It is specially designed to support the left and right circulation drying room. For example, the 100,000 kcal model drying room, it is equipped with 6 fans, three on the left and three on the right. When the three fans on the left rotate clockwise, the three fans on the right rotate counterclockwise in a cyclic alternating manner, forming a relay, The left and right sides serve as air inlets and outlets alternately, taking out all the heat generated by full combustion of natural gas. It is equipped with an electric fresh air damper to supplement fresh air in coordination with the dehumidification system in the drying room/drying place. 4. Advantages/features 1. Simple structure and easy installation 2. Large air volume and small wind temperature fluctuation 3. Stainless steel high temperature resistant inner tank, durable 4. Automatic gas burner, complete combustion, high efficiency. (After setting up, the system can control the ignition+cease fire+temperature adjust automatic), 5. High-density fire-resistant rock wool insulation box to avoiding heat loss 6. High temperature and high humidity resistant fan with IP54 protection rating and H-class insulation rating. 7. left and right fans run alternately in cycles to ensure even heating 8. Automatically replenish fresh air
Even in a very noisy environment, Model-139B still has the ability to determine quickly and precisely the positive and negative polarity of a loudspeaker headphone receiver and every single unit in a loudspeaker system. Model-139B also includes 3 sets of external input terminal and selector which can be used to combine with other instruments, in order to measure the other features of a loudspeaker simultaneously. It is quite suitable for 100% Q.C. testing for loudspeakers in the production line. Loudspeaker Polarity Tester 139B Technical specification: (1) Pulse measuring method. (2) Polarity indicator : (a) Green indicator: Positive polarity with beep sound. (b) Red indicator: Negative polarity with no sound at all. (3) Five touch switches : (a) WF range: Suitable for measuring the polarity of the woofer. (b) M & T range: Suitable for measuring the polarity of midrange and tweeter. (c) EXT.1 to EXT.3: Used to select the instrument connected to the external input terminal. (4) Model-139B can be connected with Model-7116C, to measure the buzz, and rattle of a loudspeaker. Only one operator is needed. (5) Measuring distance: 2 to 4 Cm. from the center point. of the dust cover of the pre-measure loudspeaker. (6) Measuring sensor: Uses ECM. (7) Dimension ( m / m ): 85 ( height ) x 205 ( width ) x 280 ( depth ). (8) Weight: 2.3 Kg. SUNLIGHT AUDIO SWEEPER 7116C Loudspeaker Polarity Tester 139B NOISE GENERATOR 8121C GAUSS METER 138 IMPEDANCE METER 152A DIGITAL HIGH-SPEED Fo METER 7117 C.
Chlorinated polyethylene (CPE) is one kind of high molecule elastic material developed in late years, which is one of the random chloride produced through reaction of polyethylene and chlorine. Along with rapid development of plastic and rubber industry, its application becomes much wider. Most of them are used for Plastic and rubber processing industry. It can be solely or cross-blended with other materials to Produce plastic profile shapes, waterproof winding materials, antiflaming conveyer belts, wire and Cable covers, color bike tires and magnetic adhesive strips of refrigerator. Also, it is a kind of Perfect modifier. Properties: 1) Good aging resistance and stability 2) Perfect weather ability and can have long service life under bad weather conditions 3) Bending and cracked deformation resistance, chemical resistance and organic Solvent resistance 4) Excellent low-temperature resistance and electrical specifications 5) Superior high filling property, the physical property cannot be changed after adding A lot of filling agent into CPE Range of applications: 1) CPE generally falls into two categories: CPE and CM 2) CPE type can be used as both modifier of hard plastic product and plasticizer of Soft plastic product 3) Plastic type CPE can be used solely, and also can be cross blending processed Together with other plastic materials 4) CPE product produced by our company has the characteristics of low remnants Crystallinity and proper hardness, which makes product has certain rigidity and Does not modify its toughness
According to IEC60695-2-2, IEC60695-11-5 and GB/T-5169.5, ZY-3/ZY-3S needle flame test equipment is applied in the production and quality control department of lighting products, hyperpiesia electrical apparatus, domestic appliance, machine electric appliance, electrical machine, power tool, electronic instrument, electrician instrument and technical equipment. Also, the apparatus is suitable for the industry of insulation material, engineering plastics and solid combustible material. Specifications: Angle of burner: 45 (when in test) / (when adjust the flame's height) Needle flame burning time: 0~999.9s±0.1s (adjustable, 30s in general) â?¢ After-flame time: 0~999.9s�±0.1s, auto record and pause manually â?¢ Height of flame: 12mm�±1mm (gauge is included) â?¢ Gas: 95% butane â?¢ Test range of temperature: 0~1000â?? â?¢ The temperature rises from 100â??�±2â?? to 700â??�±3â?? within 23.5 seconds�±1s â?¢ Thermocouple: �¦0.5mm K type â?¢ Applied with touch screen and remote control To save the delivery cost for the oversea market, LISUN designed a compact version needle flame test equipment weighing less than 50kg. (Customer need to prepare additional ventilation system for ZY-3S)
Hphygienic series tanks are accumulator tanks designed to work in systems with heat pumps, gas condensing boilers, solar collectors, and other energy sources. They function as both a buffer tank and a hot water heater. This tank, through layered heat storage, allows for the quick and cost-effective production of hot water. Safe operation. The heat exchanger is made of corrugated stainless steel tubing, ensuring hygienic hot water preparation. Due to the turbulent water flow on the heat exchanger's surface, calcium does not accumulate, and there is no formation of Legionella bacteria in the water. It does not require high-temperature heating to combat bacteria, as in traditional heaters. Efficient heating. The large heat exchanger with an area of up to 9m3, distributed throughout the height of the tank, guarantees high efficiency in heating hot water. The upper part of the heat exchanger ensures instant hot water supply, while the lower part is responsible for preheating the water and cooling the tank itself. The lower temperature in the lower part of the tank is very beneficial when working with heat pumps and condensing boilers. Convenient installation. Space-saving installation of the system by combining different sources into one unit. Removable insulation allows the tank to fit into a smaller door space. In conclusion, the Hphygienic series of tanks offers a range of significant benefits for efficient and hygienic hot water preparation. With a large heat exchanger, these tanks ensure high heating efficiency and instant hot water supply. The design allows for convenient installation, saving space and providing flexibility in placement. What's more, this series offers a variety of models to choose from, competitive pricing, and a host of other features that make it a reliable choice for your hot water needs. And to provide you with added peace of mind, these tanks come with a generous 5-year warranty, ensuring quality and durability for years to come. The price is retail and is subject to discounts based on the order volume.
Product overview: Stickies control agent can reduce the cohesiveness of resin composition in paper pulp and waste paper pulp by utilizing own positive electricity to fix them on pulp, thus preventing the pollution of net, coarse calico, dryer, etc. due to resin. In the meanwhile, it can reduce the shutdown and yield loss caused due to cleaning deposit. Technical specifications �· Appearance: Colorless to faint yellow liquid �· Solids content: 30 �±1% �· pH value: 2% water solution 3-7 �· Viscosity (25�°C): 500-3000 mpa.s �· Ionic type: Cation Performance characteristics 1. It can reduce the cohesiveness of resin composition in paper pulp and waste paper pulp by utilizing own positive electricity to fix them on pulp, thus preventing the pollution of net, coarse calico, dryer, etc. due to resin. 2. It can reduce the shutdown and yield loss caused due to cleaning deposit. 3. It can improve the paper machine vehicle speed and paper quality. 4. It is stable in acid, alkali and temperature. 5. It is soluble in water and generate a little bubble. Usage tips �· Adding place: It shall be added near the resin obstacles with good mixing. �· Adding method: The product is diluted for 10-20 times with clean water, with even mixing. �· Additive amount: 0.2-0.8 kg/ton slurry. Packing and storage �· It is packaged in 200kg or 1000kg plastic barrel, or packaged according to the users' requirements. It shall be stored in cool place (storage temperature at 0-30), with guarantee period: 6 months.
---------Description--------- ! We provide installation work and operational training for all of our equipment! Mobile Screening & Sand Washing Plant is a single-chassis solution for stone, sand other mineral quarries where the product needs to be sorted out and washed to get clean and ready-for-usage construction aggregate. Being one of the developed solutions for the stone crushing field, all parts of the line are constructed on a single chassis, where attachments like additional bunker walls, walking platforms, and conveyor belt are of foldable design. DISTINCTIVE FEATURES OF THE MACHINE: 1. Compact design: loading hopper, vibrating screen, screw sand washer, conveyor belts, diesel generator & walking platforms are installed on a single mobile chassis. 2. Easy transportation: machine can be transported with a single truck head. 3. Fast assembly and dismantling work: assembly work of the machine takes only 2 days. 4. Screening & Washing of the product: a combination of screening & sand washing processes can be performed with a single machine in place. 5. Stocking: foldable design conveyor belts are supplied with hydraulic pistons, which allow for the assembly of conveyor belts from a control panel to easily. Mobile Screening & Washing plant models are: SMSW 1240 600x6300 mm Single Helix / 1200x4000 mm screen / 60-100 T/H SMSW 1650 600x6300 mm Double Helix / 1600x5000 mm screen / 150-200 T/H SMSW 2250 800x8000 mm Double Helix / 2200x5000 mm screen / 250-320 T/H
Geophinex water detector uses advanced technology like VLF, VHF and GeoMagnetic Sensor based Groundwater locator and depth detector product brought to you by Geophinex Technologies. Complete case studies and custoomer satisfaction is a proven track record to identify Geophinex Detector is a power pack equipment to match various Geological conditions of all terrains to provide the highest accurate drilling results Application: Locating Groundwater point Source Depth identification Yield Qauntity Depth- 1200 Meters Front Search: 2000 meters Model â?? Geophinex ( GP-3D) Most Accurate water detector with Stream Detection, Bore Well Depth Calculation, Mobile APP Interface, Customer Data Storage, Bore Well GPS Point Storage and many more Facilities Geo Locator is one of the most powerfully designed Groundwater and Mineral exploration instrument to investigate fault zones and water bearing fractures with the means of VLF and VHF-latest advanced technology with more advanced techniques that did not exist in competitive makerâ??s instrument Features: 1. Ease of Water location finding 2. Water depth finding in display 3. Real 3D Depth fractures & Reports 4. Warranty 2 Years 5. Power Bank for Continuous / emergency charging 7. Mobile Phone pairing with Unit 8. Report in Mobile/tablet/laptop 9. Location Storing + Report Storing in both unit and Mobile phone 10. GPS Location storage in unit as well in mobile along with customer details . Uses both VHF and VLF Technology 11. Unit can be controlled with Mobile Phone pairing (Mobile APP) 12. Any mount of location data can be stored, retrieved later and can be checked for exact point location 13. PDF reports are generated automatically by the unit. 14. The reports can be shared or paired with any customer through email or watsapp etc.
Technical feature: Stable structure with high brazing speed(about 4.5-12 seconds needed per tooth) The electronic control system automatically from takes , changes, installs and welds, and the whole process takes 10-15 seconds. Changeover mainly by inputting data into the machine control Both sides cylinders automatically fixed saw blades to improve precision. The high frequency heating system and Ceia induction heating system control the temperature automatically. The accuracy of controlled temperature is �±1â?? to ensure brazing strength and heating stability. Automatic teeth selection, feeding, dosing, silver solder foil cutting and folding just through one-stage processing. Suitable for mass production, one person can control 12 equipment at the same time Technical description: Sorting and feeding of the carbide tips through the automatic feeder and conveyor belt. Dosing of the flux onto the carbide tips. Cutting of the silver wire or soldering platelets from a coil and stamping onto the carbide tips. Dosing of the flux onto the silver welding wire or silver brazing foil. Transferring the prepared carbide carbide tips into the ceramic-equipped and water-cooled soldering tongs. Brazing of the carbide tips onto the saw blade. Loading and unloading of the unbrazed and brazed saw blades automatically by robot system. Technical data: Diameter of saw blades 100mm-400mm Rake angle -5 +25 Carbide tips width: 1.5mm 11.5mm Brazing accuracy: 0.05mm Thickness of saw blades: 1.0mm 5.0mm Speed of brazing : 4.5 12s/per tooth General power: 6.0kw The width of silver solder foil: 1.5mm 5.0mm Water pressure : 3KG Air pressure: 5KG Electricity: 220 V single phase 50 Hz (wire bigger than 6mm2) Weight: 500KG Dimension : 1600mm *1200mm *1700mm Time of change blades 8 15s/pcs
Machine features: The function of automatically install and unload of blades, suitable for precision cutting board saw, electronic cutting saw, aluminum alloy saw blade, multi-blade saw and other series of saw blades. One person can operate more than 10 machines at the same time, greatly save labor cost. Silver solder bending unit continuously variablely programmable in all dimensions. Three groups of rails are adopted for the transmission of tungsten carbide tooth , which improves the running accuracy and service life of rails. Industrial PC with 10inch touch screen system with both language and logo for parameter setting, easy set-up and operation. Automatic teeth selection, feeding, dosing, silver solder foil cutting and folding just through one-stage processing. Welding the tip onto the circular saw blade by control the temperature so that the temperature controlled brazing and annealing cycle allows brazing joints perfectly. Automatically pick up of the brazed circular saw blade and placing it onto the upper pin of the loading magazine in ergonomic control position for the operator . Technical data: Diameter of saw blades:120mm~500mm Rake angle:-5~+25 Tip width: 1.5mm~6mm Brazing accuracy: 0.05mm Thickness of saw blades: 1.0mm~5.0mm Speed of brazing : 6~13s/per tooth General power: 6.0kw The width of silver solder foil: 1.5mm~6mm Diameter of silver wire : 0.5mm Water pressure : 3KG Air pressure: 5KG Electricity: 220 V single phase 50 Hz (wire bigger than 6mm2) Gross Weight: 800KG Dimension : 1600mm *1200mm *1700mm Time of change blades:15~20s/pcs Options: Camera inspection system Ceia induction heating system
Silicon Carbide Heating Element General Description Silicon carbide heating element is a kind of non-metal high temperature electric heating element. It is made of selected high quality green silicon carbide as main material, which is made into blank, siliconization under high temperature and recrystallized. It is the most popular type of economical heating element capable of operating under hot and rigorous environments. Silicon Carbide Heating Element Features 1. withstands as high as 1600�°C 2. high strength and excellent shock resistance 3. heat source is free of noise and air pollution 4. anti-oxidization, anti- corrosion 5. easy to installation and maintenance Applications of Silicon Carbide Heating Element There are ED, U, W, H, Gun, Single Spiral, Double Spirals, Dumbbel, Door-like types and etc. which are widely used in various high temperature electric furnaces in air, vacuum and other protection gas environments and other electric heating devices, such as industries of magnet, ceramics, powder metallurgy, glass and machinery, etc. Silicon Carbide Heating Elements Complete Specifications 0 Silicon Carbide Heating Elements Complete Specifications 1 Normally the following should be given when describing any type of SiC heating elements: Type: ED, U, W, SC, SCR, DB,G, H, or DM Outside Diameter (OD) : mm Length of Hot Zone (HZ) :mm Length of Cold Zone (CZ) :mm Length of Overall(OL):mm Center Distance (A) :mm Resistance at 105050 Physical property of SIC heating element specific gravity 2628gcm bend strength 300kg hardness 9MOHS tensile strength 150kgcm porosity rate
Product model: KY911 wear-resistant flux cored wire Product specifications: 1.2mm 1.6mm 15kg / box Post-weld hardness: HRC 65-70° Scope of application: It is suitable for high hardness and hard surface treatment of parts with high wear and high impact. It is suitable for surfacing welding with strong abrasion resistance. It has wide application range and high quality. Metal composition (%): C 3.00-6.00; Mn 2.00-3.00; B 5.00-8.00; Cr 20.00-25.00; Ni 2.00-3.00; Mo 2.00-3.00 Precautions: 1. Adopt DC reverse connection; 2. When welding, the flow rate of CO2 gas should be 20~25L/min; 3. The dry elongation of the wire should be controlled within the range of 15~25mm; 4. The temperature between the channels is recommended to be kept at around 300 °C; 5. Before welding, the weldment must be cleaned of rust, oil, moisture and other impurities. Precautions:   Precautions for use: The wear-resistant solder layer should generally be surfacing 1 layer. Because the number of layers is too much, the surfacing layer becomes brittle due to too high hardness and is easily broken after collision. Due to the high hardness, the welding wire has a cracking sound during the welding, and a small crack occurs, which is a normal phenomenon and does not fall off, and does not affect the service life.   We are a real wear-resistant welding consumables production factory, with a complete production process and inspection process, to provide you with high quality and cost-effective wear-resistant welding consumables.