Penetration Bitumen 60/70 is a Standard penetration bitumen grade that has a more common use compared to other qualities. Also, penetration bitumen 60/70 is base material in the production of other grades of bitumen, like oxidized bitumen, polymer bitumen, viscosity bitumen and so on. The main use of Penetration Bitumen 60/70 is in construction. Also, it is used in infrastructure and roofing. Moreover, this product has been widely used in road construction and the asphalt industry. The use of Penetration 60/70 in roofing, sealing and insulating industries are more limited compared to its use in the asphalt industry.
UF Work Principle: The Ultrafiltration is used to screening as separation principle ,that is process of membrane separation with the pressure ,the precision of filtration is in 0.005-0.01m range,which can effectively remove particles ,colloids ,bacteria ,pyrogen and high polymer organic matter in water .It can be widely applied to the separation ,concentration,purification of substances .The Ultra filtration Process has no phase inversion , operation under normal temperature.It is better to separate for pyrogen ,and have good resistance heat ,resistance acid &alkali and oxidation resistance ,and it is continuously used under 60 and PH 2-11 for a long time.
Coupling agents are materials that are used to improve the adhesion between two different materials. They are usually organic compounds containing both hydrophilic and hydrophobic groups. Coupling agents can be used in various applications, such as coating, adhesives, coupling agent of composite, and fiber-reinforced plastics. They work by bonding to both surfaces, forming a bridge between them, which allows for better adhesion. Organosilane coupling agents are often used in combination with other materials, such as primers and adhesives, to achieve optimal results. We can provide vinyl silane coupling agent. Types of Coupling Agent Tetraethyl Orthosilicate Vinyltrimethoxysilane Bis(triphenylphosphine)palladium(II) chloride The Role of Coupling Agents in Adhesion of Polymer Composites Coupling agents are important for adhesion of polymer composites. They act as a bridge between the polymer matrix and the reinforcement, improving the interfacial adhesion between the two components. Coupling agents can also reduce the surface energy of the reinforcement, which helps to reduce the interfacial tension. Furthermore, coupling agents can also improve the mechanical properties of the bop coupling agent, zirconate coupling agent, cdi coupling agent, comu coupling agent, hatu coupling agent, hbtu coupling agent of composite. Peptide coupling agents are used in peptide synthesis to facilitate the formation of peptide bonds between amino acid residues to help overcome the thermodynamic barrier of forming a peptide bond by activating the carboxyl group of one amino acid and the amino group of another.
The X-MET8000 range of handheld X-ray fluorescence analyzers delivers the performance needed for rapid alloy grade identification and accurate chemistry of a wide variety of materials (solid and powder metals, polymers, wood, solutions, soil, ores, minerals etc). The X-MET handheld XRF analyzer (HHXRF) is practical, robust and easy to use to deliver results you can trust. Hitachi's X-MET8000 handheld X-ray fluorescence (HHXRF) analyzers provides rapid and accurate chemistry of a wide array of materials such as solid and powder metals, polymers, wood, solutions, soil, ores, minerals etc. The X-MET8000 is practical, rugged and easy to use to deliver results you can trust. The light and ergonomic design of the X-MET8000 ensures it is comfortable to use on a daily basis. The nose is designed to test material inside bends and corners. Using Hitachi's HEROTM window, which is heat resistant, the X-MET8000 can accurately analyze alloys up to 400 C. The Hitachi XMET-8000 comes in 3 configuration options: XMET800 Smart, XMET8000 Optimum and X-MET8000 Expert. The X-MET8000 range of handheld X-ray fluorescence analyzers delivers the performance needed for rapid alloy grade identification and accurate chemistry of a wide variety of materials (solid and powder metals, polymers, wood, solutions, soil, ores, minerals etc). The X-MET handheld XRF analyzer (HHXRF) is practical, robust and easy to use to deliver results you can trust. The X-MET 8000 Smart is the latest portable XRF device from Hitachi, a company specializing in XRF analyzers that provides chemical analysis in the field. This model with SDD detector can perform chemical analysis of elements in the range of K (19) U (92) in less than 5 seconds in the periodic table. The X-ray fluorescence spectrometer can be used in field conditions without requiring any sample preparation thanks to its IP 54 standard and battery usage. Thanks to the specially developed thick film on the front of the device, even the sharp parts can be easily measured. The device is unique with its library of 1600 alloy standards and small compact design. It has the ability to report in Excel or PDF format. The device has the ability to store over 100,000 analyzes in memory and to report in either Excel or custom PDF format. Portable XRF devices are widely used in various fields such as alloy (metallurgy) applications, recycling, mining applications, archeology and restoration, jewelery, NDT and PMI inspections.
Chemical Name: Dibenzothiazole disulfide Molecular Formula:C14H8N2S4 Properties: A little bitter taste. Specific gravity: 1.50--1.59. Soluble in chloroform, toluene, benzene, carbon tetrachloride. Insoluble in water and ethyl alcohol. Application: Given flat, moderately fast cures in NR and SR. Also used in a wide range of general purpose rubber. Non-staining/non-discolouring in "white" socks; use as a plasticiser and/or retarder in polychloroprene rubber. Secondary acceleration is usually required for synthetic polymers. Better scorch safety than MBT. Storage: Keep container tightly closed in a cool, well-ventilated place. The recommended max. storage life is 2 years when stored under normal conditions. Packaging: 25kg bag.
Polyurethane (PU) bushes, also known as polyurethane bushings, are components commonly used in automotive and mechanical engineering to provide a cushioning and stabilizing effect in various applications. These bushings are made from polyurethane, a durable and versatile polymer material.Polyurethane bushes offer a robust solution for a wide range of applications where durability, performance, and reliability are essential. Their ability to improve handling, reduce noise, and withstand harsh conditions makes them a popular choice in automotive, industrial, and recreational settings. Applications: Automotive Suspension Systems: PU bushes are commonly used in suspension components such as control arms, sway bars, and trailing arms to improve handling, stability, and ride quality. Chassis Components: They can be found in various chassis components like subframe mounts, strut mounts, and engine mounts to reduce vibrations and improve rigidity. Industrial Machinery: PU bushes
Modified silica sol refers to a type of colloidal solution where silica nanoparticles are suspended in a liquid medium, typically water. These silica nanoparticles are modified or functionalized with various organic or inorganic compounds to alter their surface properties and enhance their performance in different applications. The modification process can involve chemically bonding organic molecules to the surface of the silica particles, which can impart specific functionalities such as hydrophobicity, oleophobicity, or compatibility with certain polymers or solvents. Inorganic modifications may include incorporating metal oxides or other nanoparticles to enhance properties like catalytic activity or mechanical strength. Modified silica sols find widespread use in various industries such as coatings, adhesives, sealants, composites, and catalysts. They offer advantages like improved dispersion, adhesion, and compatibility, making them valuable additives in many formulations.
Inbuilt Hinges that keep the lid and base together after opening. â?¢ Provision for Padlock. â?¢ Rust Proof Polymer Screws. 4.01 90 X 90 X 54 â?¢ Preferred for Solar Applications like AJBs, ACDBs, and DCDBs. â?¢ Can be mounted on walls and poles with ease. Accessories: Bus bars, hinges, couplers, rectangular couplers, gland plate, anti vibration terminal, Stud type terminal, Fixed window, Ventilators, Lock and Key, Carry Handle , Mounting clamp, pole mounting with clamp, mounting plate, cable gland, DIN Channel. CHARACTERISTICS: 1. RUST PROOF, 2. DUST AND WATER-RESISTANT, 3. IMPACT-RESISTANT, 4. ELECTRICALLY INSULATED, 5. SELF EXTINGUISHING 6. SOFT EDGES 7. ROBUST AND STRONG 8. ROHS COMPLIANT 9. MADE USING SUSTAINABLE PLASTICS
HSN Code : 29025000 Synonyms : Ethenylbenzene, Cinnamene, Cinnamenol, Ethenylbenzene, Phenethylene, Styrol, Vinylbenzene, Vinylbenzol. CAS No. : 100-42-5 Molecular Formula : C8H8 Application : Styrene is a colorless to yellowish oily liquid with a distinctive aromatic odor. It is sparingly soluble in water but soluble in alcohols, ethers and carbon disulfide. This valuable monomer is flammable, reactive and toxic. Styrene Monomer is a light liquid. It has a low vapour pressure and high refractive index. Styrene polymeric form is used in making corrosion-resistant pipes and tanks. Styrene is used in making Composite products, these products are known as fiber-reinforced polymer composites (FRP). These components are used in making automobile components. Styrene is used to make products such as rubber, plastic, insulation, fiberglass, pipes, automobile parts, food containers, and carpet backing. Most of these products contain styrene linked together in a long chain (polystyrene) as well as unlinked styrene.
1.Introduction The series is based on acrylic polymer with functional organic materials and inorganic nano-materials into complex mix of PVC processing modifier. Manly used for PVC profile, pipe. 2. Types LP1401 Item Specification Appearance White freely flowing powder Granularity (percent of pass at 40 mesh) % 98 Volatility% 1.2 Intrinsic Viscosity 2.0-4.5 Apparent density g/ml 0.35-0.55 The intrinsic viscosity is determined in the chloroform solution, 25 centigrade with 0.5-0.6mm Ukraine type viscometer. .3. Characteristics and Application: In the hard PVC products by adding a small amount of (1.5-2.0) the series of processing aid, the promotion of PVC will be able to gel and improve the melt strength of the melt, obviously improve the physical properties and surface finish of products. 4.Packaging Products are packed in sealed plastic bags, and then in weave bags The net weight for each bag is 20kg or 25kg.
Material: Natural Rubber Latex Shape: Ambidextrous, Straight finger, Textured, Single use only, Without distinction left hand - right hand, Single use only Color: Natural (light yellowish, white) Packing: 100 pcs/ inner, 10 inners/ carton Size: Gloves are produced in 5 sizes: XS, S, M, L, XL Components: Natural Rubber Latex, Chlorine-Free Product: Medical Grade, Non-sterile and Non-medical Grade, Non-sterile, Powder Free (Polymer coated) Gloves, Finger Texture Surface Technology: Inner Box: 240 x 120 x 72mm, Master Box: 370 x 250 x 250mm Brand: BP GLOVES, DH GLOVES Origin: Binh Phuoc Gloves Joint Stock Company - Viet Nam
are water-soluble polymer products. The most commonly used solutions are formulated with polyamide-epichlorohydrin (PAE) resin chemistry and are intended primarily for the consumer market. PAE resins function in neutral/alkaline papermaking processes. They have a high level of Wet strength agent permanence, help improve machine efficiency and do not adversely affect paper absorbency. Advantage: Paper production efficiency: After using the product, the paper production efficiency will be improved. Wet strength effect: Easy to absorb water, with obvious anti-scratches effect. With excellent performance of keeping luster and color, do not reduce the whiteness of original fiber. With stable chemical properties and good compatibility. Features: The product has good characteristic to reduce the problem of dropping off powder which is can widely used in the tissue, package paper, culture paper and other kinds of wet strength of paper production.
Penetration Bitumen 6070 is a Standard penetration bitumen grade which has a more common use compared to other qualities Also penetration bitumen 6070 is base material in production of other grades of bitumen like oxidized bitume polymer bitumen viscosity bitumen and so on. The main use of Penetration Bitumen 6070 is in construction Also it is used in infrastructures and roofing Moreover this product has been widely used in the road construction and the asphalt industry The use of Penetration 6070 in roofing sealing and insulating industries are more limited compared to its use in the asphalt industry� PUBLTD group as a manufacturer is one of the wellknown supplier of penetration bitumen 6070 This product is available in drum jumbo bags and as bulk So if you are consumer of this material just click here we are beside you.
As a dense and hard material, dolomite is widely in demand in construction - in finishing works and for the construction of low-rise buildings. Also, the mineral is an important element of the refractory treatment of blast furnaces for steel processing and is used as a flux for melting iron materials. In addition to the above, dolomite: used as raw material for ceramics, glass, cement, fertilizers; used in the production of pesticides, paints; is the basis for creating decorative and building stones; acts as a filler in the production of asphalt, concrete blocks, etc. A large amount of powdered dolomite (dolomite flour) is actively used in the creation of float glass. Limestone material is also added to the soil to reduce acidity and "sweeten" the land. This special material plays an important role in a variety of components used to manufacture residential and commercial construction products: plasters (including waterproof); mastics; roofing systems; construction connections; marble and polymers; concrete blocks; floor coverings - composite vinyl tiles, etc.
Product Name: Sodium Lauryl Ether Sulfate (SLES) 28% Chemical Formula: CH3(CH2)11(OCH2CH2)nOSO3Na CAS Number: 9004824 Description: Sodium Lauryl Ether Sulfate (SLES) 28% is a high-quality surfactant widely used in personal care and cleaning products. It is derived from natural fatty alcohols and exhibits excellent detergency, emulsifying, and foaming properties, making it a versatile ingredient in various formulations. Appearance: SLES 28% typically appears as a clear to slightly yellowish viscous liquid. It has a mild, pleasant odor, which makes it suitable for use in products requiring minimal fragrance interference. Key Features: High Foaming Ability: Produces rich and stable foam, even in hard water conditions. Excellent Detergency: Effectively removes dirt, oil, and impurities from surfaces. Good Emulsifying Properties: Helps in the formation of stable emulsions, enhancing product consistency. Mild to Skin: Less irritating compared to other surfactants, suitable for personal care products. Biodegradable: Environmentally friendly and safe for use in eco-conscious formulations. Applications: Personal Care Products: Shampoos Body Washes Liquid Hand Soaps Facial Cleansers Toothpastes Household Cleaning Products: Dishwashing Liquids Laundry Detergents All-purpose Cleaners Industrial Cleaners: Engine Degreasers Car Wash Solutions Technical Specifications: Active Matter: 28% min pH (1% solution): 7.0 - 9.5 Color (5% Am.aq.sol.): 20 Hazen Sodium Sulfate: 1.5% Unsulfated Matter: 1.5% Packaging: SLES 28% is available in various packaging options to suit customer requirements: 200 kg HDPE Drums 1000 kg IBC Tanks Bulk Tanker Loads Storage and Handling: Store in a cool, dry place away from direct sunlight. Ensure containers are tightly closed when not in use. Use appropriate personal protective equipment (PPE) while handling to avoid direct contact with skin and eyes. Safety and Regulatory Information: Regulatory Compliance: Complies with REACH, EINECS, and other international regulations. Safety Data Sheet (SDS): Available on request, providing detailed information on safety, handling, and emergency measures.
We are China biggest oxidized polyethylene wax manufacturer with capacity 15,000MT per year,we have been in production of OPE wax more than 20 years. With the high and stable quality,currently we have taken China biggest market share in pvc foam board,WPC,SPC and pvc stabilizer.We also have taken India 1st market share since 2017 which could be seen from the India custom data. We have advantages in high density oxidized polyethylene wax , Our OA series OPE wax can completely replace Honeywell and BASF products with more competitive price widely used in the PVC products and PVC stabilizer industry. We have also established long-term cooperation with international stabilizer manufacturers such as Baerlocher and Sunace in some advantage products like OA716 which has high melt point and good fusion,it can be used in most pvc products to replace Honeywell AC316. OA719 which has high viscosity and high melt point to replace Honeywell AC307,with the highest viscosity it take good dispersivity in high filler formulation and promote good fusion to have better surface in pvc products. OA316A+ our R&D work out the advantage catalyst same as A-C 316A, it is the only grade in the market could totally replace Honeywell A-C 316A in most application like PVC products, PVC foam board, calcium zinc stabilizer, PVC stabilizer, color masterbatch, coating, cable,emulsion , printing, dyeing and textile, asphalt modification, etc.
Product Description: Gum Acacia Discover the exceptional qualities of Gum Acacia, a natural and versatile ingredient perfect for a wide range of industrial applications. Sourced from the finest acacia trees, our product is meticulously processed to ensure the highest standards of purity and functionality. Key Features: - High Quality: Sourced from premium acacia trees, ensuring consistent purity and performance. - Natural and Safe: 100% natural, non-GMO, and free from harmful additives. - **Versatile Applications: Ideal for use in food and beverages, pharmaceuticals, cosmetics, and industrial products. - Excellent Emulsifier: Provides stability and texture to emulsions, making it perfect for beverages and sauces. - Soluble Fiber: Acts as a prebiotic, promoting digestive health when used in dietary products. - Binding Agent: Enhances texture and extends shelf life in bakery and confectionery products. Specifications: - Origin: Sudan - Appearance: Light tan to off-white powder - Solubility: Highly soluble in water - Packaging: Available in bulk bags or customized packaging options - Certifications: Organic, Non-GMO, ISO certified - Shelf Life: 24 months Trade Details: - Minimum Order Quantity (MOQ): 500kg - Trade Term: FOB - Payment Term: T/T - Delivery Time: 1-2 weeks Why Choose Our Gum Acacia? - Superior Quality: Guaranteed consistency and reliability in every batch. - Competitive Pricing: Attractive rates for bulk purchases. - Reliable Supply: Steady availability to meet your business needs. - Excellent Customer Service: Dedicated support to ensure a smooth transaction process. Enhance your products with the natural benefits of Gum Acacia. Contact us today to place your order or request a sample.
Characters: Ivory powder or flake-shaped solid. It can be dispersed well in hot water and soluble in ethanol and hot oils and fats with pleasant caramel-like odor. It is an anionic emulsifier with HLB value of 8.3. Applications: It can be used for multiple purposes such as emulsification, aging resistance, gluten fortifying and fresh-keeping in many kinds of food such as bread, steam bread, noodle, instant noodle and dumpling. It can also be used as an emulsifier in milk, non-dairy creamer, margarine, fresh cream, meat products, animal and vegetable oils, etc. (1) Increase the springiness, toughness and gas-holding capability of dough, increase volume of the bread and steam bread and improve the organization and structure. (2) It can react with amylose to delay and prevent the food aging. (3) It can make it easier to remove biscuits from moulds to produce smooth appearance, distinct layers and crisp feeling in mouth. (4) It can make hot and spicy food more pliable and softer and prolong the preservation time. (5) It can produce smoother surface, lower broken ratio, higher soaking and boiling resistance for noodle, dried noodle and instant noodle, and make them chewier. (6) Enhance the quality of quick frozen food, improve their organization and structure, and prevent surface cracking and filling escaping. Usage: (1) It can be directly mixed well with flour for use. (2) Put this product into warm water at about 60â?? with proportion of 1:6 to get paste shaped substance, ten add it into flour in proportion to obtain better effect. (3) When used in non-dairy creamer or this kind of substance, it should be heated well with emulsified substance to get homogeneous emulsion before further processing. Recommended Adding Amount: 0.2~0.5 %
Characters: Ivory powder or flake-shaped solid. It can be dispersed well in hot water and soluble in ethanol and hot oils and fats with pleasant caramel-like odor. It is an anionic emulsifier with HLB value of 5.1. Applications: It can be used for multiple purposes such as emulsification, aging resistance, gluten fortifying and fresh-keeping in many kinds of food such as bread, steam bread, noodle, instant noodle and dumpling. It can also be used as an emulsifier in milk, non-dairy creamer, margarine, fresh cream, meat products, animal and vegetable oils, etc. (1) Increase the springiness, toughness and gas-holding capability of dough, increase volume of the bread and steam bread and improve the organization and structure. It can react with amylose to delay and prevent the food aging. It can make it easier to remove biscuits from moulds to produce smooth appearance, distinct layers and crisp feeling in mouth. (2) It can make hot and spicy food more pliable and softer and prolong the preservation time. (6) Enhance the quality of quick frozen food, improve their organization and structure, and prevent surface cracking and filling escaping. Usage: (1) It can be directly mixed well with flour for use. (2) Put this product into warm water at about 60â?? with proportion of 1:6 to get paste shaped substance, ten add it into flour in proportion to obtain better effect. (3) When used in non-dairy creamer or this kind of substance, it should be heated well with emulsified substance to get homogeneous emulsion before further processing. Recommended Adding Amount: 0.2~0.5 %( Calculated by Flour, Refer to GB2760-2011)
As leading manufacturers of pearl and pigments, we are offering a product that use in paint, plastic, coating, seeds, polymer coating, cosmetic, automotive, ink and more. We Export Our Pigments Worldwide, Like â?? India, Nepal, Dubai, Thailand, Algeria, Vietnam, United State, Brazil, Russia, Ethiopia, Turkey and more. Our Gold Pearl Pigments also called Buddha Gold, Shiny Gold, Bright Gold and more. They are perfect quality to deliver great performance. Our pigment imparts a sheen and depth to any substrate it, transforming ordinary surfaces into masterpieces. In the paint industry, our Gold Pearl Pigment adds a touch of coatings, automotive finishes, and decorative paints, to create visual effects formulations. Within the plastic industry, our pigment adds in plastic products, enhancing their appeal and value in the market. Our Gold Pearl Pigment is the best quality of coatings, ensuring long-lasting protection with stunning visual appeal. In seeds polymer coating, our pigment offers a identity to coated seeds, enhancing their performance. We also provide Synthetic Base Gold Pearl Pigments and the Client Wants. Code of Gold Pearl Pigment is 4707. Our Gold Pearl Pigment finds widespread application in the cosmetic industry, where it provides cosmetics with a radiant glow and finish. Our Gold Pearl Pigment is the best choice for achieving quality pigments to diverse industries. Partner with us and unlock the transformative power of Pearl pigments today.