QE Model double trolley overhead crane is suitable to lift long materials(wood, paper tube, pipe and bar) in workshops or outdoors to store in factory and mines. The two trolley could work separately and at the same time. QE double girder overhead crane are mainly consists of Girder frame, Crane travelling device, two lifting trolley and electrical parts. Bridge adopts box welded structure, high degree of vertical and horizontal rigidity; crane travelling mechanism adopts separate drive. It has a strong beam and a stable travelling mechanism; the emergency switch can stop any movement once any dangerous happened. It is rely on the bridge frame along the workshop rail direction moving longitudinal, the trolley along the main beam direction moving transverse and the hook lifting movement to work. It is an excellent choice where high speeds and heavy service are required. As the widely used hoisting machinery currently especially is suitable for working at warehouses and freight yard and other department it is prohibited to use the equipment in the combustible, explosive or corrosives environment.
The crane is composed with Girder frame, Crane travel device, and the trolley with lifting and moving device. There are Pave the rail for the trolley move on the main girder. Assemble the moving table on the outside of the two main girder, one side is prepare for the assemble and maintenance the crane move device, another side is prepare for the assemble of the trolley conductor device. There are full field of view Cabin suspend under the main girder, there are joint control desk or single control box packed within the Cabin, assemble the sidelong ladder between the Cabin and moving table, The main girder joint with the two side end carriage which with the joint point in the middle.
LH Type Electric Hoist Bridge Crane is composed of box-shaped bridge, trolley travelling mechanism, cab and electric equipment. It adopts fixed electric hoist installed on cab frame as lifting mechanism. The cab uses LD drives to run, while the trolley has two types of drive, LD type and QD type.
Colour pigments, industrial chemicals,plastisol inks , antioxidant , bentonite /calcium carbonate / mica / talc / wollastonite / feldspar / kaolin (china clay) bezaldehyde , caramel , detergent chemicals , enzymes feed / textile / leather. fragrances , gum & modified gum , leather auxiliaries / chemicals magnesium oxide / magnesium sulphate heptahydrate / monohydrate / anhydrous, maize starch powder (corn starch powder) , manganese sulphate monohydrate / manganese oxide , mono chloro /sodium mono chloro acetate , paint driers , para chloro ortho nitro aniline , disperse dyes, fluorescent coolant dyes (water soluble) , phosgenated salt free / low salt paper colour (direct dyes) ,ultra marine blue pigment , vat indigo blue grain , water soluble fluorescent soap colour / agriculture green , wool dyes, carbon black, detergent & soaps, herbal extract , household & industrial cleaning products.
Condition:New Application:workshop warehouse etc hoist Rated Loading Capacity:0.5-32ton (on request) Rated Lifting Moment:60KN Max. Lifting Load:32TON or On Request Max. Lifting Height:6m,9m,12m,18m, 24m, 30m Span:5-40m or on request Warranty:2 Years After-sales Service Provided: Engineers available to service machinery overseas Control method:Pendent button, wireless remote, cabin Lifting mechanism:Electric Hoist Colour:Optional Power Source:Local Actual Condition Lifting speed:8/5m per minute Contact:Alina
Condition:New Application:workshop warehouse etc hoist Rated Loading Capacity:0.5-32ton (on request) Rated Lifting Moment:60KN Max. Lifting Load:32TON or On Request Max. Lifting Height:6m,9m,12m,18m, 24m, 30m Span:5-40m or on request Warranty:2 Years After-sales Service Provided: Engineers available to service machinery overseas Control method:Pendent button, wireless remote, cabin Lifting mechanism:Electric Hoist Colour:Optional Power Source:Local Actual Condition Lifting speed:8/5m per minute
ABUS double-girder overhead travelling cranes Load capacity: up to 120 t Span: up to 40 m(depending on load capacity) Easy to install accessories High crane and trolley travel speeds possible Wide range for connection variants for optimum adaption to local conditions Very high hook positions possible
Fasteners are the general term of the class of mechanical parts used in fastening two or more parts (or components) into a whole. It is widely used in energy, electronics, electrical appliances, machinery, chemical, metallurgy, mold, hydraulic and other industries, at the same time, in various kinds of machinery, equipment, vehicles, ships, railway, bridge, construction, structure, tools, instruments, chemical, instruments and supplies, you can see all kinds of fasteners, is the most widely used mechanical foundation parts. It is characterized by a wide variety of variety specifications, different performance uses, and a very high degree of standardization, series, and generalization. Therefore, a class of fasteners that already have national standards is called standard fasteners, or simply standard ones.
1.Introduction This crane mainly consists of strong bridge beams, trolley-travelling mechanism, crab and electric appliances, and could be classified into several working duties, e.G. A5, a6, a7, according to the working frequency and pure working time. 2.Control method Remote control, pendent line with push button , cabin control 3.Design and construction rules All the standards required for the crane is according to china standards. 4.Painting Primer and finishing paint Color:according to your requirements Average thickness:about 100microns 5.Standard capacity 5tons, 10tons, 16/3.2tons, 20/5tons, 32/5tons, 50/10tons, 75/20tons, 100/20tons, 100/30tons, 125/30tons, 150/30tons, 160/32tons, 200/50tons, 400/80tons, 560/250tons.
1.Product description Ld crane is widely used in plants, warehouses, material stocks to lift godds. It is prohibited to use the equipment in the combustiblle, explosive or corrosives enviroment. The capacity:1-30ton The span : 7.5-31.5m The working grade : a3-a5 The working temperature:-25, to 40, 2.Product details Ld model single beam motor crane is improved and designed on the basis of ld model. It is characterized by more reasonable structure and higher strenght steel as a whole, used together with cd model, md model electric hoist as a complete set. Advantage 1). Compact design, optimal use of the work areas 2). Heavier loads, wider spans and higher working frequency 3). Control the load easily, position the load exactly 4). Superior safety and reliability 5). , one-stop shop for your crane and hoist needs
Overhead Crane Specification 1. Load capacity: 1 t to 50 t 2. Span: 10.5 m - 33 m 3. Lifting Height: 6 m - 20m 4. Structure: Box structure type 5. Certification: CE, ISO 9001 6. Power Supply: 380V, 50HZ, 3 Phase 7. Standard: GB/T 24001-2004 Single Girder Overhead Crane Description Single girder European overhead crane is special designed for low headroom heavy load handling application. Improved hoist trolley so that lifting mechanism and trolley traveling are at same level, saving more height for lifting. This structure highly solves the problem lifting cargo in low roof clearance workshop or warehouse. Single girder overhead crane adopts European advanced technology, designed based on international standard: FEM (Europe), DIN (Germany), ISO(International), The configurations are very advanced, such as Schneider electrical, ABM/Nord / SEW triple gear motor (three in one: motor, gear box, brake), galvanized high strength wire rope, self-adjusted disk brake, hard tooth reducer, programmable lifting limit switch, and so on. This Europe style overhead crane is of remote control with single cable "C" track festoon system; normally, we use Europe Realm (OHM) brand Compared with the general LD bridge crane, its weight is reduced about 15-30%, the maximum wheel pressure is reduced by about 10-35%, based on assimilating advanced technology,the single girder overhead crane takes modular design theories, modern computer technology, new material and technology and has features in strong rigidity, light dead weight, low power, outstanding design, save energy and environment protection. Single girder overhead crane can be applied in machinery production, assembling, petrochemicals, warehouse logistics, electric power construction, paper making and railways, etc. Single Girder Overhead Crane Feature 1. Increase the lifting height, Working in low headroom without enough space above the main girder 2. Low dead weight of computerize optimized box section 3. Aluminum alloy made drum shell, light weight, corrosion resist 4. Lifting drive units complete seal lubricate design, free maintenance 5. Traveling and lifting motors use closed type transmission gear, low noise, maintenance free 6. Modularized electrics, multiple protection, safe operation 7. Sensitive limit switch, automatically stop lifting and traveling when reach distance limit
During the overhead crane running, due to the inertia, the lifting hook ( or other spreaders) will swing with overhead crane move, this swing is not conducive to crane hoisting operations. Anti-swing device can help the overhead & gantry crane to avoid the impact, bow we suggest the electronic anti - swing to instead of mechanical anti-swing device. Overhead crane electronic anti-swing control system consist of sensor, programmable controller, drive and bridge crane system, uses digital ac variable frequency speed control device. Working principle Its working principle is: the sensors and detection element collect the running information, such as spreader swing angle, the angular velocity and so on, microcomputer internal programmable controller will process these detected information, then will provide the best control parameter to the vehicle velocity modulation system ( drive device) to control the electric hoist trolley running direction and speed, limit the spreader and load swing angle to the minimum, then achieve anti-swing and eliminate swing purpose. Together with electric trolley running, electronic anti-swing achieve the effect of reducing swing by controlling the corresponding input force, can achieve automatic control, compared with the mechanical anti-swing device, no need drivers operating experience, almost can unmanned operate.
QC Electromagnetic Overhead Crane Application In loading and unloading, the crane can lift iron or steel blocks, cylinders and so on. It is very convenient for application in loading, unloading, and moving. Permanent Magnetic crane are the most ideal lifting facility for factories, docks, warehouses and transportation. Description QC type electromagnetic overhead crane is a kind of heavy duty magnet crane, which is consisting of beams, cabin, flexible electromagnetic chuck, crane traveling mechanism, trolley lifting and cross traveling mechanism, electrical control system. The beams are welded by the machine hands, which make the structure more reasonable and reliable; The cabin used for operating the crane, which has seats inside; The electromagnetic chuck can adsorbs iron goods; The trolley can move horizontally on the rail fitted on beams; Floor adopts insulation pads and toughened glass for windows; extinguisher and fan are equipped. Both traveling mechanism and trolley motors are special motors for canes, large starting torque and loading capacity. Other accessory like air-condition, buzzer, inter phone can be configured according to our clients request! The shape of the magnetic can be designed according to adsorptive goods.
1.Efficient material handling where limited head room is available 2.Space saving configurations. 3.Capacities ranging up to 12.5tonnes, with Spans up to 36m. 4.Compact design allows very high hook positions. Electric parts packed by strong plywood crate, others packaged in polythene woven cloth.
Condition:New Application:workshop warehouse etc hoist Rated Loading Capacity:0.5-32ton (on request) Rated Lifting Moment:60KN Max. Lifting Load:32TON or On Request Max. Lifting Height:6m,9m,12m,18m, 24m, 30m Span:5-40m or on request Warranty:2 Years After-sales Service Provided: Engineers available to service machinery overseas Control method:Pendent button, wireless remote, cabin Lifting mechanism:Electric Hoist Colour:Optional Power Source:Local Actual Condition -
girder bridge type, automatic submerged arc welding. (2)Adopt new conductive cable device, safe and reliable. (3)According to requirements, lifting mechanism can also set a second safety device, reliability increased. (4)All parts standardized, serialized, and generalized, easy to fix and maintain. (5) QD crane is controlled with operating room, flexible work, expand sight, safe.
LDA Type1-5T Overhead Mobile Hoist Crane is ameliorated and designed on the basis of LD type single beam overhead crane. The hoisting mechanism is the hoist which is running at the I-steel under the main girder. The obvious feature is an ingenious structure and easy to maintain. It is used CD/MD model electric hoist as a lifting mechanism.
single girder travelling cranes adapt to different building applications due to their various main girder connection variants. Favourable crane dimensions help to reach optimal highest hook positions.
China HSHCL Single Girder End Carriage for 5 Ton Overhead Crane use rectangular tube manufacturing module, buffer motor drive, match with forged wheels, using numerical control lathe boring and milling of various Customized machine, Disposable completes the opening, boring, milling drilling. You just need to joint and adjust crane girder and the end carriage. The low cost, makes your crane manufacturing, installation and maintenance very easy. Advantage 1. Lightweight robust construction. 2. Low effort to lift maximum load. 3. Durable baked enamel paint protection. 4. Overload protection device available upon request. Our Company Henan Shenghua Heavy Crane Group is a big enterprise specialized in researching, developing, producing and exporting. It mainly produces overhead crane, gantry crane, launching gantry crane and beam launcher, movable scaffolding system crane, form traveller, straddle carrier, tyre transporter, beam trolley, portal crane and electric winch, China HSHCL Single Girder End Carriage for 5 Ton Overhead Crane, electric hoist and all kinds of accessories, which widely cover machinery, metallurgy, electric power, railway, water conservancy, ports, terminals and other industries. Shenghua Heavy Crane Group have more than 600 staff, and covers 200,000 square meters. Able to self-complete lathe, milling, planning, grinding, pull, boring, rolling, drilling, punching, cutting, bending, plate rolling, plug weld, testing and heat treatment etc all kinds of process. Our advantages: 1. More than 50 R&D personnel with advanced Science and technology. 2. More than 400 sets advanced Production processing equipment and inspection equipment. 3. Independent intellectual property rights to develop energy saving bridge cranes, gantry cranes, and electric hoist. 4. Obtain ISO 9001 certificate and more than 10 series of patent certificates. 5. Efficient service and competitive products. 6. Export more than 100 countries.
