Density at 15 c 0.690-0.740 kg/l Color saybolt plus 30 Distillation Ibp 35 c min Fbp 175 c max Doctor test negative Rvp at 100f 0.75 kg/cm2 max Paraffin 60 vol pct min Olefin trace N+a 40 vol pct max Copper corrosion 1 a Sulfur 50 ppm max Lead 50 ppb max
Molecular formula: c6h15cl2no Molecular weight£º188.10 Cas no.: 3327-22-8 H.S.Code: 29239000.90 Sp. Gr.(20 c): 1.16 Boiling point: 101c Melting point: 191-193c Flashing point: 109c, 230f Specification: Appearance: colorless transparent liquid Ph value: 2-6 Concentration: 69% min Ech (epichlorohydrin): 5ppm max Dch (1, 3-dichloropropanol): 20ppm max Special note: we could also supply material with 65% concentration. Packing: 250kg plastic drums, 80 drums/20mt in one container. Or flexitank (flexibag) of 22mt each in one container.
Three phase motor Range 0.10 h.P. To 75 h.P. (0.075 k.W. To 55 k.W.) frame 63 to 250m in 2, 4, 6, 8, 10 & 12 pole Mounting - foot- flange- face Standards Performance conforms to be: 325 and dimensions according to is 1231 & is 2223 Frame Motor are supplied in a robust, rugged cast iron frame with integral feet. On request we can supply motor in aluminum body up to 100 l frame. Ratings All standard three phase motors are continuous rated to comply with performance standards. Voltage and frequency Supply volts 415 +- 5% 3 phase 50 hz. +- 3% (on customer request we are also able supply motor in 220, 380, 460, 525 volts on hz. 50 or 60 also) Enclosures Motor ip-44 protection as defined in is: 4691. Motors can be supplied with ip-54 and ip-55 on request. Insulation Motor supply with class b & f insulation as standard feature. Also supply h on request of customer. Shaft Made from high carbon steel to provide exceptional strength & rigidity to minimize deflection. Rotor Rotors are of high-pressure e.C. Grad aluminum die-cast. Every rotor is dynamically balanced. Its make motor low amplitudes of vibration & noise Bearings & lubrication Bearings are adequately lubricated with lithium based high temp up to 150 deg. All the motors are supplied with c3 ball bearing & fully charged with lithium base grease at the time of assembly. Earthling terminals Motor provided with minimum two earthling terminals. One in the terminal box and other on foot. Paints All standard motor are painted with semi glossy synthetic enamel paint. However sp. Paint is available on request. Export packing avalbale
Application: watch parts processing,metal stamp,jade,agate,small mold,pole,heat mold etc. Model EM-1015 X-Y-Z axis work area 100*150*150mm table size 200*250mm Machine body Cast iron machine body with heat treatment XYZ drive machinism C3 class TBI imported ball screw Guide rails for X Y Z axises H class imported HIWIN linear square rails 20mm Max speed 5m/min Max engraving speed 3m/min Spindle power 2.2KW constant power spindle with imported NSK bearings Spindle speed 0-24000r/min Inverter power 2.2KW Drive motor Imported Japan SAMSR stepper motor with driver Working voltage AC220V/50-60HZ Command code G code Collect 3.175mm,6mm Tool set equipment Z tool sensor Working precision 0.05/300mm Repeat precision 0.02mm Software Artcut/type3/artacam/UG/auto CAD Controls DSP offline control system Net weight 200kg plywood package
hazelnut- 100% organic- grade a-high quality size: size : 13 to 15 and 15 plus moisture less than 6% free fatty acids - less than 1% peroxides - max 1 aflatoxines b1 - less than 1
hazelnut- 100% organic- grade a-high quality size: size : 13 to 15 and 15 plus moisture less than 6% free fatty acids - less than 1% peroxides - max 1 aflatoxines b1 - less than 1
Product name : chlorinated paraffin wax (cpw) Chemical name : cpw Specifications Sr.__characteristics_specifications 1.Grade_cp - 50 2.Chlorine__50% 3appearance__white to pale yellow viscous liquid 4.Ph6.0 to 6.5 5.Sp. Gravity at 25.5° c__1.280 ± 0.01 6.Heat stability at 180° c for 1 hour_colour turns to dark yellow / dark brown 7.Colour (hu)__80 max 8.Volatile loss 180° c/4 hrs__2.2% max 9.Viscocity at 27° c (poise)__18 ± 6 10.__refractive index at 27° c__1.506 ± 0.002 11.__free mineral acidity_0.001% max 12.__paraffin range__c14 - c17 Uses : Secondary plasticiser in pvc compounding, pipes & hoses, cable compound, footwear, leather cloth Additive in lubricating oils Additive in special grades of paints. Packing : 250 kgs un approved hdpe barrels. Tanker load Stuffing : 20 mt per 20'fcl.
We are visimex jsc is one of the most reputed manufacturer and exporter of high quality spices and other agro based products originated from vietnam such as: cashew nuts, pepper, robusta coffee, black cardamom, star anise, desiccated coconut, cassia (cinnamon), tapioca (cassava), turmeric etc We supply large quantity, good quality & competitive price! For cashew nut: w240, w320, w450, ws, lp, sw, sp… Specification: as per afi standard Moisture:5% max, Broken:5% max Foreign matter:1% max Color:light ash, yellow Live insect and larvas : not allowed coliforms, salmonella: not allowed Packing: in tin boxes or pe bags into cartons Vacuum pp bags 50 lb each/ 1 carton, or tin box 25lb each, 2 boxes/1 carton.
Test Method Limit Unit Guarantee Density @ 15C,ISO 3675 or ISO 12185,Max,Kg/L,0.955 Kinematic Viscosity@40C,ISO 3104,Max,Cst,280 Flash Point,ISO 2719,Min Pour Point (upper),ISO 3016,Max Carbon residue,ISO 10370,Max,%m/m,15 Ash Content,ISO 6245,Max,%m/m,0.1 Water Content,ISO 3733,Max,%v/v,1 Sulphur Content,ISO 8754 or ISO 14596,Max,%m/m,4 Vanadium,ISO 14597 or IP 501 or IP 470,Max,mg/kg,+20 Total Sediment potential,ISO 10307-2,Max,mg/kg,0.1 Aluminum Plus Silicon,ISO 10478 or IP 501 or IP 470,Max,mg/kg,80 Sodium,ISO 10478 or IP 501 or IP 470,Max,mg/kg,15 Phosphorus,ISO 10478 or IP 501 or IP 470,Max,mg/kg Nickel,ISO 10478 or IP 501 or IP 470,Max,mg/kg,15 H2S Content,ISO 8217-2010, Max,mg/KOH/g,0.5 max Organic chloride, ASTM D 4929,,PPM,0
Storage Function other parameter Receiving distance (max. ) Model of configurable sensors Overall dimension (mm) usb rs-485 Network Flash storage Background storage Alarm setting D Product features: 1. Receive data from 100 wireless temperature sensors simultaneously 2. Access software in a variety of ways to manage monitoring easily. 3. Expand mass storage to save historical data, read data through usb. 4. Have data interface to access other instruments conveniently. Remark: (standard); (optional); (null) No. Model basic parameter Communication interface Storage Function other parameter Receiving distance (max. ) Model of configurable sensors Overall dimension Flash storage Background storage Alarm setting Data display Data forwarding Alarm Power supply Frequency Display screen Machine Software 1 at-ii-x100c01 800m at-ii-c3/c6/c7/tc/tr 180*100*40 Sound and light; on-off alarm node ac: 85v~264v; dc: 110v~370v; 220v± 10%50hz 433mhz~470mhz 3lcd 3" lcd 2 at-ii-x100c02 800m at-ii-c3/c6/c7/tc/tr 200*135*31 3 at-ii-x100d01 800m at-ii-d6 180*100*40 4 at-ii-x100d02 800m at-ii-d6 200*135*31 At-ii-x256 series Product features: 1. Receive data from 256 wireless temperature sensors simultaneously. 2. Access software in a variety of ways to manage monitoring easily. 3. Expand mass storage to save historical data, read data through usb. 4. Have data interface to access other instruments conveniently. 5. Analysis functions for native data. No. Model Basic parameter Communication interface Storage Function other parameter Receiving distance (max. ) Model of configurable sensors Overall dimension (mm) usb rs-485 network Flash storage Background storage Alarm setting Data display Data forwarding Data analysis with curve Alarm Power supply Frequency Display screen Export standard packing: carton box or wooden case
We have alfalfa hay pellet and bale availible for export. Specifications Protein: 14-18% Fiber: 28% max Moisture: 9% max Ash: 11% max Fat: 2% max Alfalfa is widely grown throughout the world as forage for cattle, and other livestock animals. Alfalfa has the highest feeding value of all common hay crops. Alfalfa is high in protein, calcium, plus other minerals and vitamins A, B, C, D, E and K. Alfalfa Meal Pellet we are providing has various protein level depend on the season, cultivation method and production area. Diameter 6mm, 8mm or request Moisture 8.8%max Protein 14%-20% Crude Fiber 28% max Ash 11% max Fat 2% max
LS-S/SP SERIES STAINLESS STEEL GARDEN SUBMERSIBLE PUMP The LS-S/SP is a single open impeller centrifugal submersible drainage pump designed to function either partly or totally submerged.The impeller,mounted on the end of the drive shat,consists of a back disk and blades.The fuid enters the rotating blade channel through the suction,where it moves radially from the center outwards,acquiring energy both in the form of pressure and increased speed.When it leaves the impeller the fluid is conveye~towrds the volute.Here part of the kinetic energy is transformed into pressure energy,and the fluid leaves the pump via the side delivery opening in the pump body.Correct motor cooling is ensured by the fluid being pumped. WORKING CONDITIONS Fluid temperature up to 35íµ. Maximum ambient temperature 40íµ. Max particale:5mm(Clean water). Standard data and equipment: Singe phase220v/50Hz. í¦H05/07RH-Fí¦Neoperence submersible supply cable. Supplied standard with 10 Meters of cable and plug.
Bottomer for paper valve sack production Model : 5B-SP Manufacture : NEWLONG Mfg Year : 1977 Specification:- - For Tube width : (380) - 445 495 mm (slow speed) - For Tube length : 490 1000 mm - Bottom width : 80 100 mm - 2 x flexoprint units for paper patch -Patch paper cutting length : 320 520 mm -Patch paper width : upto Max. 105 mm -Valve paper cutting length: 100 200 mm -Valve paper width : upto Max. 270 mm - Bottom Center Distance : 290 700 mm - Mechanical Maximum Speed : 105 sacks/min. - Current Status : visible in operation - Availability : Immediate, subject to remain unsold All machine or equipment is offered as is where is with all faults without warranty and is subject to prior sales. All information provided in this offer is from the source(s), which is/are deemed reliable and trusted.
AV-14 AL, Wafer, Bare + Type of body: Wafer + Flange: JIS 5K/10K , ANSI 150, PN 10 + Material : _ Body : Aluminum Alloy Diecast (ADC-12) _ Disc : Stainless Steel (304, 316) _ Stem : Stainless Steel (304, 316) _ Seat : EPDM, NBR + Face to face dimension : _ ISO 5752, API 609, MSS SP-68, _ DIN 3203/K1 (short) + Top flange dimension : Bolt hole ISO 5211 + Light weight & compact + Max. Pressure : 10 kg/cm2 (0.98MPa) + Max. Temperature : EPDM (-20 c to +120 c) + Test : Body = 15 kg/cm2 (1.47MPa) / Seat = 11 kg/cm2 (1.08MPa) +OPTION - Long bonnet
Features 1. 15rows X 20cols LCD operator display, high light LED customer display 2. Very high-speed and silent thermal printer. 3. One graphic store logo, and up to 10 hallo logos can be printed on receipt. 4. External devices support: Kitchen printer, scale, and customer display 5. Automatic recognize 4 kinds of in-store barcode. 6. Electronic journal support 7. Customer management support(VIP member function). 8. Max. 9 Cooking messages 9. PLU name can catch up to 20 characters. 10. PLU sale amount, quantity top25 report. 11. PLU profit analysis report 12. PLU safe stock report 13. PLU chains function 14. POP-UP customer display 15. PUSH-PULL clerk display 16. PS/2 keyboard or PS/2 scanner support 17.Cash drawer is split style. (many kinds of CD selectable) 18. USB interface 19. VAT/TAX system selectable. 20. 18000 Electronic journal. Dimension: L/W/H(mm):360*330*255 Package dimension: L/W/H(mm):470*440*360 Weight(Net): 5,5Kg Power: 30W. AC 85-265V.
Our Metallurgical / Foundry / Forge Coke is made from original Bituminous coal, producing the purest cleanest, lowest clinker, and hottest burning fuel available. No smoke, no smell, no soot. Our Coke is especially processed and sized to be used in in the iron and steel industries. Sized at 1/4 x 1 inch, max 5% plus 1 inch, 12% minus 1/8 inch. Carbon 91%, Vol. 1%, Ash 8%, Sulfur 0.7%, Moisture 12% max.
Synonyms: 1,3,5-triglycidyl-s-triazinetrione; HARDENER TGIC-SP (MICROPOWDER WITH LOW CHLORINE CONTENT) Molecular Formula: C12H15N3O6 TGIC is widely used as a cross-linking agent or curing agent in powder coating industry, It is used also in the printed circuit board industry,electrical insulation and as a stabilizer in plastic industry. Typical applications of polyester TGIC powder coatings are where sharp edges and corners exist such as on automotive wheels, air conditioners, lawn furniture, and air conditioner cabinets. Molecular Weight: 297 CAS. No.: 2451-62-9 Appearance: White grain or powder Major Index: 1) Melting Range: 90-115 C 2) Epoxide Equivalent: 9.0-11.5eq/kg 3) Chlorine: 1.0% MAX 4) ECH Remains: 300ppm MAX 5) Volatile matter: 1.0% MAX 6) Viscosity (120 Centigrade) : 100CP MAX 7) Granularity: 4 -6mm Packing: 25kgs/bag ,16 tons in 20¡¡¥FCL with pallets 25kgs/bag ,16 tons in 20¡¡¥FCL with pallets
Compatible With: GP68, GP88, GP88S, GP328, GP338, GP338 PLUS, P2000,GP3688,GP140, GP280, GP300, GP320, GP330, GP340, GP344,GP350, GP360,GP380,GP388, GP640,GP680, GP1280 HT10,HT50, HT600,HT750,HT1250, HT1250-ls, HT1250-ls+, HT1550, HT1550-xls,CT150,CT250, CT450, CP040,CP140, CP150,CP160,CP180, CP185,CP190, CP200, EX500, EX600, EX600-xls, EP350,EP450 PR400, PR860 , PTX600, PTX700, PTX760, PTX760PLUS,SP50, SP10, P10, P50, P100, P110, P200, P210, P1225 ,1225-LS,PRO1150, PRO2150, PRO3150, PRO5150, PRO715, GP240,GP540,GP580, GP644, GP688 But is also applicable to the ATEX certified GP340Ex, GP380Ex, GP580Ex and GP680Ex We also have handheld portable radio antenna: ATU-6D, FA-SC55V, FASC-57U, FA-SC57VS, HAD9742A, KRA-16M, KRA-22, LED805S, NAD6502AR, PMAD4023A, PMAD4025A, RH-536, NA-636, 666, RH-N771, 801s, 860, 951, 999, ALQ2, K820, KRA-14, KRA-27M, 515, 775, 800, 802, 901S, AL800, K24, K8202, L99, S35, T20, T33, U8, U20, U29, V3 For GP-68, GP-88, GP-88S, GP-140, GP-150, GP-200,GP-300, GP-320, GP-328, GP-338, GP-338 PLUS,GP-340, GP-350,GP-380, GP-640, GP-680, GP-1280, GP-2000, GP-3688, HT-10, HT-50, HT-600, HT-750,HT-1250, HT-1250-ls, HT-1250-ls+, HT-1550, HT-1550-xls, CT-150,CT-250, CT-450, CP-150, CP-200, EX-500, EX-600, EX-600-xls, R-400, PR-860, SP-50, SP-10, P-10, P-50, P-100, P-110, P-200, P-210, P-1225 , P-1225-LS, PRO-1150, PRO-2150, PRO-3150, PRO-5150, PRO-7150, Saber, Saber IR, Saber II, MX-1000 Antenna For Compatible With:IC-V82 IC-V8 IC-T3H IC-V85 IC-V85E IC-V80 IC-V80 Antenna
Product name: ble Cas number: 68412ú¡48ú¡6 Specification: Appearance: puce sticky liquid Viscosity pa.S 2.5-7.0 Ash: 0.3% max Application: rubber antioxidant ble is a general anti-aging agent for rubber products. Rubber antioxidant ble has fine protective effects to thermal-oxidative aging; flex cracking, fatigue aging as well as a certain effect to ozone aging and weathering aging. Rubber antioxidant ble can also be used as stabilizing agent for synthetic rubber such as sbr, br etc. Meanwhile, rubber antioxidant ble can promote the adherence of the gross rubber with the metal wire cord and other framework materials. Main rubber additives: ippd(4010na), 6ppd(4020), tmq, pan, pbn, ble, sp, 2246, dotg, tbbs, cbs, dbha(2000), si69 Place of origin: China 200kg¿miron drum;18kg/carton
Model sp u200 Suppot os windows@2000/xp(all use windows built-in audio driver) Coverage hand free coverage range about 1 meter Built-in microphone sensitivity -44db+/-3db Frequency roponse 20-16khz Built-in speaker frequency range 120~20khz Built-in speaker impedance 4ohm, +/-15% Built-in amplifier output power 2w Ajustment receiver volume adjustments Echo cancellation up to 45db Noise suppression superior noise suppression up to 15db Automatic calibration support automatic calibration when power on Full duplex support full duplex Power 5v, 500ma max Weight 185g Regulation&standard fcc / ce
