SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc ( +10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80 C. When the DC panel has a temperature over 100 C, the module will stop working; when the DC panel has a temperature below 90 C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
As a reputable manufacturer, exporter, and supplier, we offer high-quality Calcined Kaolin Powder at competitive prices. Our advanced processing techniques guarantee consistent quality, low specific gravity, excellent whiteness, and purity. We prioritize the packaging of our products to ensure that they are free from moisture during transportation to customers. Our unique Features are Free From Impurities, Unique Particle Size, Improving Brightness And Opacity, Lower Finish Costs, Low Bulk Density, and Very Good Process Ability.
PE Granules High density polyethylene (HDPE) for non-toxic, tasteless, no smelly white particles, melting point is about 130 �° C, relative density of 0.941 ~ 0.960. It has good heat resistance and cold resistance, chemical stability, but also has high rigidity and toughness, good mechanical strength. Dielectric properties, environmental stress cracking resistance sex also is good. Low DENSITY POLYETHYLENE (LDPE), commonly known as high-pressure POLYETHYLENE, is mainly used in plastic bags and agricultural film due to its LOW DENSITY and the softest material. Linear Low Density Polyethylene (LLDPE) is a copolymer of ethylene and a small amount of advanced olefin in the presence of catalyst.LLDPE is similar to LDPE in appearance, with poor transparency and good surface gloss. LLDPE has the advantages of low temperature toughness, high modulus, bending resistance and stress cracking resistance, and good impact strength at low temperature. We have a wide range of grade PE materials with different physical properties. If the table does not meet your requirements, please feel free to consult us we will try our best to meet all your requirements for plastic granules.
High molecular weight linear polysaccharide, used to increase viscosity for cutting transport and weight-material suspension for all water-base mud. Provides better rheological profile with elevated low-shear-rate viscosity and highly shear-thinning characteristics. Both food grade and oil and gas drilling grade are available. For price, specification and other details please contact us.
Naphtha is aromatic low density fuel consumed internally in refinery for production of Petrol and Hydrogen. Used as a feed, unutilized production is sold to petrochemical and other industries like fertilizers etc For price, specification and other details please contact us.
2 Volt LMLA Battery Cell Features Positive Plate-Tubular low corrosion grid & Low self-discharge rates. Negative Plate- lead grid providing low corrosion & low enhanced force life because of very less discharge Terminals �¯�¿�½?�?�¯�¯�¿�½?�?�¿�¯�¿�½?�?�½?�?�¯ï¿½?�¿ï¿½?�½?�¯�¿�½?�?�¢?? Antimonial lead, specially designed for sustained high current Container & lid-high grid polymer Separator-Envelope type high density and porosit Connectors-lead plated copper connectors. Advantage Easier to Install Low water top-up during service life. Long life because of very low corrosion & enhance free self discharge rate. Proven cycling & deep cycling capability Enhancement in life High buy back value after the end of the life. Eco Friendly Low emission of corrosive fumes or gases under normal operating conditions.
Inverter Battery Features Long Life Life-1200 Cycle Special Tubular positive spines cast at high pressure 100 bar to raise corrosion life Extra Back-up Excellent reserve capacity for long backup. More current density, max. AH efficiency. Operating Specific Gravity 1.250 +/-0.005 at 270C. Deep Cycle Back-up high charge acceptance due to usage of quality PE separator. Special additives for better charge acceptance & retention. Low Maintenance Special Alloy grids ensures low gassing and minimum water loss. 20% Extra electrolyte for less topping & batter thermal Management Low internal resistance seal proof leak proof. Float indicators level.
ES fiber is a sheath-core composite fiber obtained by successfully combining low-melting components and high-melting components on a single fiber. It has excellent thermal bonding properties. The low melting point component in ES fiber melts under heat treatment conditions higher than its melting point, and bond with other materials to form a binder-free environmentally and friendly non-woven fabric. ES fiber has various advantages such as soft, fluffy, low-temperature processing, heat-bonding, plasticity, non-toxic, non-irritating, and lightweight. It is mainly used to manufacture high-quality sanitary products such as sanitary napkins and diapers. And it is also high-quality materials used to make medical products such as medical protective cloth and medical protective masks, and so on. There are two main types of ES fibers. The first kind is a composite of PE and PP. Its sheath layer is PE (polyethylene, melting point 130�°C), and its core layer is PP (polypropylene, melting point 165�°C). The second kind is a composite of PE and PE. Its sheath layer is PE, and the core layer is PET (polyester, melting point 255â??), which is an upgraded version of PE/PP. ES is divided into EP and ET in terms of material and functionally divided into the hydrophilic, water-repellent, hydrophilic, and weak parent, single parent, multi-parent.In addition, it also can be divided into whitening, general whitening, high holding, medium holding, and low holding. The specifications are 1.5D38mm, 2D38mm, 4D51mm, and so on. In the future, the trend will gradually develop towards fine deniers. SPECIFICATION: PE+PET ES Fiber: Optical White & Super Hydrophile 2D*38mm, Optical White & Hydrophile 2D*38mmï¼? Optical White & Water Repellency 2D*38mmï¼? RAW White & Water Repellency 2D*38mmï¼? Optical White & Super Hydrophile 1.5D*38mmï¼? Optical White & Water Repellency 1.5D*38mmï¼? RAW White & Water Repellency 1.5D*38mï¼? Hydrophile 2D*38mmï¼? Water Repellency 2D*38mm PE+PP ES Fiber: Hydrophile (P2Q) 2D*38mm
Polyethylene is the world's most widely used thermoplastic and is made by the polymerization of ethylene. Polyethylene is often classified by its density, because greater density corresponds with greater material rigidity. The world�¢??s largest volume polyethylene is high density polyethylene (HDPE), which has a relatively high degree of tensile strength. Plastic containers represent the most common household use of high-density polyethylene. At the opposite end of the spectrum is low density polyethylene (LDPE), which was the first type of polyethylene to be developed. Flexible packaging represents the most common household use of low-density polyethylene. Both high- density polyethylene and low-density polyethylene are also commonly used for moulding applications. Linear low-density polyethylene (LLDPE) can usually be manufactured at a slightly lower cost than low density polyethylene and has similar basic properties. While low-density polyethylene and linear low-density polyethylene are to a certain extent substitutable for each other, one may be more suitable than the other for a specific application.
LDPE, which is generally colorless, translucent, flexible, odorless, tasteless plastic, is one of the most excellent properties of heat sealability and can be adhered at about 120 C. Because of this feature, it is widely used as an intermediate layer to connect two layers which do not stick to each other thermally in the coatings. It also has favorable properties such as being transparent and resistant to tearing, significantly reducing water vapor permeability, and significantly reducing its elasticity at low levels.
Material: High Density Polyethylene. Origin: Saudi Arabia. Source: Petrochemical Industry. Grade: Injection Molding. Color: Natural. Packing: 750-850 KG Jumo Bags. Loading Port: Jeddah Saudi Arabia. Payment Terms: TT basis for less than 100 TONS order. LC basis for minimum 100 Tons order. Please contact for price and more details.
Goat Fattener Feed (G-030316) Crude Protein : 15.5 % Minimum Crude Fat : 2.6 % Minimum Crude Fibre : 7.4 % Maximum Ash : 6.2% Metabolizable Energy : 12.41 mj/kg Calcium : 1.46 % Usage This product is specifically designed for those customers who need extremely low Budget Feed and want to include with the Home Grounded Traditional Feed. This feed serves the basic need of the animal from Minerals and Vitamins requisite view point. GENERAL DETAILS Ingredients :Corn Gluten Meal, DDGS, Pluses, Essential Amino Acids, Vitamins, Minerals, Trace Minerals, Toxin Binders and Mold Inhibitor Ingredient Profile : 100% Vegetarian Moisture (% Maximum) - 12 Product Form : Coarse Mash Form / Pellet Form Product Branding - ANUPAM Net Weight : 39 Kgs When Packed Product Pricing : On Unit Basis (for each 39 Kgs Packing) Production Capacity per Day : 450 MT/Day Factory Visit : Not Permissible Fumigation : Aluminum Phosphide or Methyl Bromide (or any as per buyer specification) Clinical Test Methodology : As per IS:2052 Proximate Analysis on Dry Matter Basis BASIC INFORMATION FOR DOMESTIC BUYERS Outer Packing : Poly Propylene (Milky White) Price Offer : On Ex- Factory Basis Mode of Payment : 100% Advance Through Bank Cash/ Cheque/ RTGS/NEFT For Inter State Transaction : VAT Number is Must Tax Applications : NIL Truck Loading : 17 MT: 440 Bags, 21 MT: 540 Bags, 25 MT: 645 Bags, 28 MT: 720 Bags Minimum Order Quantity : As per Buyer Requirement & Material Availability with us. Buyer Branding Offer : Yes, for Bulk Orders Only. Buyer has to arrange for Packing Material BASIC INFORMATION FOR OVERSEAS BUYERS Inner Packing : Low Density Polyethylene Bags of 75 Micron Outer Packing : Poly Propylene (Milky White) Price Offer : On CIF Destination Port Basis or Delivery basis to Nearest Transit Port Mode of Payment : 100% Wire Transfer Only, we dont accept L/c or SBLC of any nature. Terms of Trade : Mutually Agreeable Basis Cargo Stuffing in 20 FCL : 600 Bags of 39 Kgs Total Load Stuffing : 23.4 MT in 20 FCL Minimum Order Quantity : 600 Bags or One 20 FCL Buyer Branding Offer : Yes, when MOQ = 3000 Bags or Five 20 FCL Nearest Transit Ports : Kandla Port, Adani Port and Pipavav Port Buyer Specific Packing Offered : Yes, when MOQ = 3000 Bags or Five 20 FCL Our Standard Shipping Document Phytosanitary Certification Fumigation Certificate Food Hygiene Certificate from Veterinary Department India
Broiler Chicken Feed (0 3 Weeks) (PBF-010323) (Feed from 5 Weeks 7 Weeks) Metabolizable Energy kcal/kg : 3200 Crude Protein % : 23.0 Calcium % : 1.00 Available Phosphorus % : 0.45 Thiamin (mg/kg) : 1.80 Pyridoxine (mg/kg) : 3.0 GENERAL DETAILS Ingredients : Corn Gluten Meal, Wheat Gluten, Soy Meal, DDGS, Grains, Pluses, Essential Amino Acids, Vitamins, Minerals, Trace Minerals, Toxin Binders and Mold Inhibitor Ingredient Profile : 100% Vegetarian Moisture (% Maximum) 12 Product Form : Coarse Mash Form / Pellet Form Product Branding - ANUPAM Net Weight : 39 Kgs When Packed Product Pricing : On Unit Basis (for each 39 Kgs Packing) Production Capacity per Day : 450 MT/Day Factory Visit : Not Permissible Fumigation : Aluminum Phosphide or Methyl Bromide (or any as per buyer specification) Clinical Test Methodology : As per IS:2052 Proximate Analysis on Dry Matter Basis BASIC INFORMATION FOR DOMESTIC BUYERS Outer Packing : Poly Propylene (Milky White) Price Offer : On Ex- Factory Basis Mode of Payment : 100% Advance Through Bank , Cash/ Cheque/ RTGS/NEFT For Inter State Transaction : VAT Number is Must Tax Applications : NIL Truck Loading : 17 MT: 440 Bags, 21 MT: 540 Bags, 25 MT: 645 Bags, 28 MT: 720 Bags Minimum Order Quantity : As per Buyer Requirement & Material Availability with us. Buyer Branding Offer : Yes, for Bulk Orders Only. Buyer has to arrange for Packing Material BASIC INFORMATION FOR OVERSEAS BUYERS Inner Packing : Low Density Polyethylene Bags of 75 Micron Outer Packing : Poly Propylene (Milky White) Price Offer : On CIF Destination Port Basis or Delivery basis to Nearest Transit Port Mode of Payment : 100% Wire Transfer Only, we dont accept L/c or SBLC of any nature. Terms of Trade : Mutually Agreeable Basis Cargo Stuffing in 20 FCL : 600 Bags of 39 Kgs Total Load Stuffing : 23.4 MT in 20 FCL Minimum Order Quantity : 600 Bags or One 20 FCL Buyer Branding Offer : Yes, when MOQ = 3000 Bags or Five 20 FCL Nearest Transit Ports : Kandla Port, Adani Port and Pipavav Port Buyer Specific Packing Offered : Yes, when MOQ = 3000 Bags or Five 20 FCL Our Standard Shipping Document Phytosanitary Certification Fumigation Certificate Food Hygiene Certificate from Veterinary Department India
Layer Chick Feed Chick Mash (PLF-060720) Moisture (maximum %) : 11 Crude protein (N x 6.25) (maximum %) : 20 Crude Fat (maximum %) : 7 Crude fibre (maximum %) : 7.0 Acid-insoluble ash (maximum %) : 4.0 Salt (as NaCl) (maximum %) : 0.6 Calcium (Ca) (maximum %) : 1.0 GENERAL DETAILS Ingredients : Corn Gluten Meal, Wheat Gluten, Soy Meal, DDGS, Grains, Pluses, Essential Amino Acids, Vitamins, Minerals, Trace Minerals, Toxin Binders and Mold Inhibitor Ingredient Profile : 100% Vegetarian Moisture (% Maximum) - 12 Product Form : Coarse Mash Form / Pellet Form Product Branding - ANUPAM Net Weight : 39 Kgs When Packed Product Pricing : On Unit Basis (for each 39 Kgs Packing) Production Capacity per Day : 450 MT/Day Factory Visit : Not Permissible Fumigation : Aluminum Phosphide or Methyl Bromide (or any as per buyer specification) Clinical Test Methodology : As per IS:2052 Proximate Analysis on Dry Matter Basis BASIC INFORMATION FOR DOMESTIC BUYERS Outer Packing : Poly Propylene (Milky White) Price Offer : On Ex- Factory Basis Mode of Payment : 100% Advance Through Bank, Cash/ Cheque/ RTGS/NEFT For Inter State Transaction : VAT Number is Must Tax Applications : NIL Truck Loading : 17 MT: 440 Bags, 21 MT: 540 Bags, 25 MT: 645 Bags, 28 MT: 720 Bags Minimum Order Quantity : As per Buyer Requirement & Material Availability with us. Buyer Branding Offer : Yes, for Bulk Orders Only. Buyer has to arrange for Packing Material BASIC INFORMATION FOR OVERSEAS BUYERS Inner Packing : Low Density Polyethylene Bags of 75 Micron Outer Packing : Poly Propylene (Milky White) Price Offer : On CIF Destination Port Basis or Delivery basis to Nearest Transit Port Mode of Payment : 100% Wire Transfer Only, we dont accept L/c or SBLC of any nature. Terms of Trade : Mutually Agreeable Basis Cargo Stuffing in 20 FCL : 600 Bags of 39 Kgs Total Load Stuffing : 23.4 MT in 20 FCL Minimum Order Quantity : 600 Bags or One 20 FCL Buyer Branding Offer: Yes, when MOQ = 3000 Bags or Five 20 FCL Nearest Transit Ports : Kandla Port, Adani Port and Pipavav Port Buyer Specific Packing Offered : Yes, when MOQ = 3000 Bags or Five 20 FCL Our Standard Shipping Document Phytosanitary Certification Fumigation Certificate Food Hygiene Certificate from Veterinary Department India
Organic Chicken Grower Feed (PBF-150424) Moisture (maximum %) : 12 Crude protein (N x 6.25) (maximum %) : 23.8 Crude Fat (maximum %) : 3.9 Crude fibre (maximum %) : 3.3 Acid-insoluble ash (maximum %) : 6.5 Metabolizable energy (minimum mj/kg) : 11.4 GENERAL DETAILS Ingredients :Corn Gluten Meal, Wheat Gluten, Soy Meal, DDGS, Grains, Pluses, Essential Amino Acids, Vitamins, Minerals, Trace Minerals, Toxin Binders and Mold Inhibitor Ingredient Profile : 100% Vegetarian Moisture (% Maximum) - 12 Product Form : Coarse Mash Form / Pellet Form Product Branding - ANUPAM Net Weight : 39 Kgs When Packed Product Pricing : On Unit Basis (for each 39 Kgs Packing) Production Capacity per Day : 450 MT/Day Factory Visit : Not Permissible Fumigation : Aluminum Phosphide or Methyl Bromide (or any as per buyer specification) Clinical Test Methodology : As per IS:2052 Proximate Analysis on Dry Matter Basis BASIC INFORMATION FOR DOMESTIC BUYERS Outer Packing : Poly Propylene (Milky White) Price Offer : On Ex- Factory Basis Mode of Payment : 100% Advance Through Bank , Cash/ Cheque/ RTGS/NEFT For Inter State Transaction : VAT Number is Must Tax Applications : NIL Truck Loading : 17 MT: 440 Bags, 21 MT: 540 Bags , 25 MT: 645 Bags, 28 MT: 720 Bags Minimum Order Quantity : As per Buyer Requirement & Material Availability with us. Buyer Branding Offer : Yes, for Bulk Orders Only. Buyer has to arrange for Packing Material BASIC INFORMATION FOR OVERSEAS BUYERS Inner Packing : Low Density Polyethylene Bags of 75 Micron Outer Packing : Poly Propylene (Milky White) Price Offer : On CIF Destination Port Basis or Delivery basis to Nearest Transit Port Mode of Payment : 100% Wire Transfer Only, we dont accept L/c or SBLC of any nature. Terms of Trade : Mutually Agreeable Basis Cargo Stuffing in 20 FCL : 600 Bags of 39 Kgs Total Load Stuffing : 23.4 MT in 20 FCL Minimum Order Quantity : 600 Bags or One 20 FCL Buyer Branding Offer : Yes, when MOQ = 3000 Bags or Five 20 FCL Nearest Transit Ports : Kandla Port, Adani Port and Pipavav Port Buyer Specific Packing Offered : Yes, when MOQ = 3000 Bags or Five 20 FCL Our Standard Shipping Document : Phytosanitary Certification Fumigation Certificate Food Hygiene Certificate from Veterinary Department India
Broiler Chicken Feed (3 6 Weeks) (PBF-020320) (Feed from 5 Weeks 7 Weeks) Metabolizable Energy kcal/kg : 3200 Crude Protein % : 20.0 Calcium % : 0.90 Available Phosphorus % : 0.40 Potassium % : 0.35 Copper (mg/kg) : 8.0 GENERAL DETAILS Ingredients : Corn Gluten Meal, Wheat Gluten, Soy Meal, DDGS, Grains, Pluses, Essential Amino Acids, Vitamins, Minerals, Trace Minerals, Toxin Binders and Mold Inhibitor Ingredient Profile : 100% Vegetarian Moisture (% Maximum) - 12 Product Form : Coarse Mash Form / Pellet Form Product Branding - ANUPAM Net Weight : 39 Kgs When Packed Product Pricing : On Unit Basis (for each 39 Kgs Packing) Production Capacity per Day : 450 MT/Day Factory Visit : Not Permissible Fumigation: Aluminum Phosphide or Methyl Bromide (or any as per buyer specification) Clinical Test Methodology : As per IS:2052 Proximate Analysis on Dry Matter Basis BASIC INFORMATION FOR DOMESTIC BUYERS Outer Packing : Poly Propylene (Milky White) Price Offer : On Ex- Factory Basis Mode of Payment : 100% Advance Through Bank ,Cash/ Cheque/ RTGS/NEFT For Inter State Transaction: VAT Number is Must Tax Applications : NIL Truck Loading : 17 MT: 440 Bags, 21 MT: 540 Bags, 25 MT: 645 Bags, 28 MT: 720 Bags Minimum Order Quantity : As per Buyer Requirement & Material Availability with us. Buyer Branding Offer : Yes, for Bulk Orders Only. Buyer has to arrange for Packing Material BASIC INFORMATION FOR OVERSEAS BUYERS Inner Packing : Low Density Polyethylene Bags of 75 Micron Outer Packing : Poly Propylene (Milky White) Price Offer : On CIF Destination Port Basis or Delivery basis to Nearest Transit Port Mode of Payment : 100% Wire Transfer Only, we dont accept L/c or SBLC of any nature. Terms of Trade : Mutually Agreeable Basis Cargo Stuffing in 20 FCL : 600 Bags of 39 Kgs Total Load Stuffing : 23.4 MT in 20 FCL Minimum Order Quantity : 600 Bags or One 20 FCL Buyer Branding Offer : Yes, when MOQ = 3000 Bags or Five 20 FCL Nearest Transit Ports : Kandla Port, Adani Port and Pipavav Port Buyer Specific Packing Offered: Yes, when MOQ = 3000 Bags or Five 20 FCL Our Standard Shipping Document Phytosanitary Certification Fumigation Certificate Food Hygiene Certificate from Veterinary Department India
Broiler Chicken Feed (0 3 Weeks) (PBF-010323) (Feed from 5 Weeks 7 Weeks) Metabolizable Energy kcal/kg : 3200 Crude Protein % : 23.0 Calcium % : 1.00 Available Phosphorus % : 0.45 Thiamin (mg/kg) : 1.80 Pyridoxine (mg/kg) : 3.0 GENERAL DETAILS Ingredients : Corn Gluten Meal, Wheat Gluten, Soy Meal, DDGS, Grains, Pluses, Essential Amino Acids, Vitamins, Minerals, Trace Minerals, Toxin Binders and Mold Inhibitor Ingredient Profile : 100% Vegetarian Moisture (% Maximum) 12 Product Form : Coarse Mash Form / Pellet Form Product Branding - ANUPAM Net Weight : 39 Kgs When Packed Product Pricing : On Unit Basis (for each 39 Kgs Packing) Production Capacity per Day : 450 MT/Day Factory Visit : Not Permissible Fumigation : Aluminum Phosphide or Methyl Bromide (or any as per buyer specification) Clinical Test Methodology : As per IS:2052 Proximate Analysis on Dry Matter Basis BASIC INFORMATION FOR DOMESTIC BUYERS Outer Packing : Poly Propylene (Milky White) Price Offer : On Ex- Factory Basis Mode of Payment : 100% Advance Through Bank , Cash/ Cheque/ RTGS/NEFT For Inter State Transaction : VAT Number is Must Tax Applications : NIL Truck Loading : 17 MT: 440 Bags, 21 MT: 540 Bags, 25 MT: 645 Bags, 28 MT: 720 Bags Minimum Order Quantity : As per Buyer Requirement & Material Availability with us. Buyer Branding Offer : Yes, for Bulk Orders Only. Buyer has to arrange for Packing Material BASIC INFORMATION FOR OVERSEAS BUYERS Inner Packing : Low Density Polyethylene Bags of 75 Micron Outer Packing : Poly Propylene (Milky White) Price Offer : On CIF Destination Port Basis or Delivery basis to Nearest Transit Port Mode of Payment : 100% Wire Transfer Only, we dont accept L/c or SBLC of any nature. Terms of Trade : Mutually Agreeable Basis Cargo Stuffing in 20 FCL : 600 Bags of 39 Kgs Total Load Stuffing : 23.4 MT in 20 FCL Minimum Order Quantity : 600 Bags or One 20 FCL Buyer Branding Offer : Yes, when MOQ = 3000 Bags or Five 20 FCL Nearest Transit Ports : Kandla Port, Adani Port and Pipavav Port Buyer Specific Packing Offered : Yes, when MOQ = 3000 Bags or Five 20 FCL Our Standard Shipping Document Phytosanitary Certification Fumigation Certificate Food Hygiene Certificate from Veterinary Department India
High Energy Sheep Feed (S-280815) Moisture (% Maximum) : 12.0 Crude Protein % : 14.7 Crude Fat % : 8 Crude Fiber % : 20.2 Metabolizable Energy kcal/kg : 2685 Crude Ash % : 6.7 GENERAL DETAILS Ingredients : Corn Gluten Meal, Wheat Gluten, Soy Meal, DDGS, Pluses, Essential Amino Acids, Vitamins, Minerals, Trace Minerals, Toxin Binders and Mold Inhibitor Ingredient Profile : 100% Vegetarian Moisture (% Maximum) : 12 Product Form : Coarse Mash Form / Pellet Form Product Branding : ANUPAM Net Weight : 39 Kgs When Packed Product Pricing : On Unit Basis (for each 39 Kgs Packing) Production Capacity per Day : 450 MT/Day Factory Visit : Not Permissible Fumigation :Aluminum Phosphide or Methyl Bromide (or any as per buyer specification) Clinical Test Methodology : As per IS:2052 Proximate Analysis on Dry Matter Basis BASIC INFORMATION FOR DOMESTIC BUYERS Outer Packing : Poly Propylene (Milky White) Price Offer : On Ex- Factory Basis Mode of Payment : 100% Advance Through Bank, Cash/ Cheque/ RTGS/NEFT For Inter State Transaction : VAT Number is Must Tax Applications : NIL Truck Loading : 17 MT: 440 Bags, 21 MT: 540 Bags, 25 MT: 645 Bags, 28 MT: 720 Bags Minimum Order Quantity : As per Buyer Requirement & Material Availability with us. Buyer Branding Offer : Yes, for Bulk Orders Only. Buyer has to arrange for Packing Material BASIC INFORMATION FOR OVERSEAS BUYERS Inner Packing : Low Density Polyethylene Bags of 75 Micron Outer Packing : Poly Propylene (Milky White) Price Offer : On CIF Destination Port Basis or Delivery basis to Nearest Transit Port Mode of Payment : 100% Wire Transfer Only, we dont accept L/c or SBLC of any nature. Terms of Trade : Mutually Agreeable Basis Cargo Stuffing in 20 FCL : 600 Bags of 39 Kgs Total Load Stuffing : 23.4 MT in 20 FCL Minimum Order Quantity : 600 Bags or One 20 FCL Buyer Branding Offer : Yes, when MOQ = 3000 Bags or Five 20 FCL Nearest Transit Ports : Kandla Port, Adani Port and Pipavav Port Buyer Specific Packing Offered : Yes, when MOQ = 3000 Bags or Five 20 FCL Our Standard Shipping Document Phytosanitary Certification Fumigation Certificate Food Hygiene Certificate from Veterinary Department India
Broiler Chicken Concentrate 10% (BFC-010642) Moisture (% Maximum) : 12.0 Crude Protein (% Minimum) : 42.0 Crude Fat (% Minimum) : 6.0 Crude Fiber (%Maximum) : 2.0 Crude Ash (% Maximum) : 34.0 GENERAL DETAILS Ingredients : Corn Gluten Meal, Wheat Gluten Meal, DDGS, Soy Meal, HP Pluses, Essential Amino Acids, Vitamins, Minerals, Trace Minerals, Toxin Binders and Mold Inhibitor Ingredient Profile : 100% Vegetarian Product Form : Coarse Mash Form Moisture % Maximum - 12 Product Branding - ANUPAM Net Weight : 39 Kgs When Packed Product Pricing : On Unit Basis (for each 39 Kgs Packing) Production Capacity per Day : 450 MT/Day Factory Visit : Not Permissible Fumigation : Aluminum Phosphide or Methyl Bromide (or any as per buyer specification) Clinical Test Methodology : As per IS:2052 Proximate Analysis on Dry Matter Basis BASIC INFORMATION FOR DOMESTIC BUYERS Outer Packing : Poly Propylene (Milky White) Price Offer : On Ex- Factory Basis Mode of Payment : 100% Advance Through Bank, Cash/ Cheque/ RTGS/NEFT For Inter State Transaction : VAT Number is Must Tax Applications : NIL Truck Loading : 17 MT: 440 Bags, 21 MT: 540 Bags, 25 MT: 645 Bags, 28 MT: 720 Bags Minimum Order Quantity : As per Buyer Requirement & Material Availability with us. Buyer Branding Offer : Yes, for Bulk Orders Only. Buyer has to arrange for Packing Material BASIC INFORMATION FOR OVERSEAS BUYERS Inner Packing : Low Density Polyethylene Bags of 75 Micron Outer Packing : Poly Propylene (Milky White) Price Offer : On CIF Destination Port Basis or Delivery basis to Nearest Transit Port Mode of Payment : 100% Wire Transfer Only, we dont accept L/c or SBLC of any nature. Terms of Trade : Mutually Agreeable Basis Cargo Stuffing in 20 FCL : 600 Bags of 39 Kgs Total Load Stuffing : 23.4 MT in 20 FCL Minimum Order Quantity : 600 Bags or One 20 FCL Buyer Branding Offer : Yes, when MOQ = 3000 Bags or Five 20 FCL Nearest Transit Ports : Kandla Port, Adani Port and Pipavav Port Buyer Specific Packing Offered : Yes, when MOQ = 3000 Bags or Five 20 FCL Our Standard Shipping Document Phytosanitary Certification Fumigation Certificate Food Hygiene Certificate from Veterinary Department India