Soil testing equipment, concret testing equipment, bitumen testing equipment, aggregate testing equipment , rock testing equipment , water testing equipment , cement testing equipment , civil laboratory equipments, construction material qc lab equipment , mechanical engineering laboratory equipments , material testing equipments , thermal laboratory equipment , metrology laboratory equipments, metallurgy equipments, fluid mechanics lab equipments , automobile engineering lab equipments , road highways testing equipments, soil mechanis lab equipments, heat trasfer lab equipments, fuel testing equipment , refrigeration laboratory equipment , digital meter, survey instruments, milling machine, grinding machine, auto level instruments, laboratory apparatus, compression tester, cube testing machine, slump cone, cube mould, rapid moisture meter, sand pouring cylinder, field density apparatus, weighing balance, core cutter, auto level total station, theodolite, slump cone, silver mercury,.
¡¾Overview of the Ceramic Ball Mill: The Ceramic Ball Mill is the key equipment for grinding after the crush process, and it is widely used in the manufacture industries, such as cement, silicate, new building material, refractory material, fertilizer, ferrous metal, nonferrous metal and glass ceramics, it also can be used for the dry and wet grinding for all kinds of ores and other grind-able materials. ¡¾Operating principles of Ceramic Ball Mill" The Ceramic Ball Mill is horizontal cylindrical rotation device, driven by brim gearwheel. There are two chambers and grid. Material goes into the first chamber through the feeding inlet. Inside the first chamber, there are stage liners and ripple liners as well as steel balls. The shell rotates so as to generate electricity, and this force brings ball to a certain height and then balls drop down by gravity, the impact is the grinding force to the material. After the primary grinding, materials go into the second chamber through segregate screen. In the second chamber, there are flat liners and steel ball. After the secondary grinding, material is discharged from the discharging mouth. Then the whole grinding process is ended. ¡¾Structure of Ceramic Ball Mill: The machine is composed of feeding part, discharging part, turning part and driving part (reducer, small driving gear, electric motor and electric control). The quill shaft adopts cast steel part and the liner is detachable. The turning gearwheel adopts casting hobbling process and the drum is equipped with wear-resistant liner, which has good wear-resistance. The machine is with stable and reliable working condition. Moreover, according to different materials and discharging methods, there are dry ball mills and wet ball mills for choice. Ceramic ball mill is mainly designed to mix and mill materials. With less energy it produces high fineness product. It has two types, wet mills and dry mills. According to different customers requirement, the machine could use different lining board product. The milling fineness depends on the milling time. The motor is started by the coupling which can reduce voltage and lower the starting electricity. The structure is divided into integral type and freestanding type. It has two kinds of structure: Integral type and independent type. This product has a low investment and save energy than similar products, novel structure, simple operation, safe use, stable and reliable performance, suitable for mixing and grinding operation of general and special material. Users can choose suitable model, liner, media types based on proportion of materials, hardness and other factors ¡¾Features of Ceramic Ball Mill: 1. Lower investment, energy saving, 2. Unique structure, simple operation, safe use, stable property 3. Suitable to grinding and mixing general and special materials. 4. Users can choose the suitable model, lining board and media as per the factors, such as: material¡¯s specific gravity and hardness, as well as output, etc. ¡¾Specifications of Ceramic Ball Mill: type 600 700 800 600 900 1200 1300 1500 1500 1800 1800 2000 2600 2800 3000 3800 3200 4600 3400 6600 International standard container,the spare parts is packed in wooden cases.
Auto Adhesive Tape Rewinding Machine Applications of Tape Wrapping Machine Tape Wrapping Machine is suitable for rewinding all kinds of tapes such as masking tape, double sticky tape, cloth tape , kraft tape , PET, and other based material. Features of Tape Wrapping Machine 1. 2 -step length counter, auto speed decreasing & stop. 2. inflatable shaft rewinding ,auto constant tension controlling 3. Pneumatic controlling rubber contact roller, to guarantee smooth, transparent without bubble rewinding effects. 4. Pneumatic brake feeding system, mechanical shaft. instant pause or stop of rewinding 5. Constant tension control system specializes in producing flat ,smooth, unbroken rewinding Technicial Parameters of Tape Wrapping Machine Valid width of tape rewinding machine(mm) 1300 Max unwinding diameter(mm) 700 Max rewinding diameter(mm) 280 Proper paper core inner diameter(mm) 76.2 Speed of tape rewinding machine (M./min) 0--100 Size of tape rewinding machine(L*W*H) 2.2m*1.1m*1.1m Voltage of tape rewinding machine: 380V 50HZ Packaging Package of Adhesive Tape Wrapping Machine
Smartlink 2800 pci modem card Features: Chipset: smartlink 2800 56k internal fax modem Data modulation rate: V. 34bis, v. 34+, itu-t v. 34 V. 32bis, v. 32, v. 22bis, v. 22 and bell 212a Itu-t v. 23, v. 21 and bell 103 Transmission: 56, 000, 33, 600, 31, 200, 28, 800, 24, 000, 14, 400, 12, 000, 9, 600, 7, 200, 4800, 1, 200, 1, 200/75 and 300bps Voice mode: remote / local record and play back voice Computer interface: pci bus and plug-and-play Data compression: itu-t v. 42bis and mnp 5 Compatibility: pentium 200 (over) with mmx, cpu with pci bus Auto-dialing: touch-tone and pulse dialing, auto dial and auto answer Fully compliant with v. 90, v. 34 bis, v. 32, v. 32 and v. 22 bis specifications Software upgradeable Supports modem wake-up on ring from d3 cold Packing: 100pcs/ctn Carton dimensions: 700 x 450 x 190mm N.W: 6kg G.W: 8kg
Concrete Testing Equipment Products Aggregate Testing Bitumen Testing Cement Testing Concrete Testing Soil Testing Surveying Equipment Strength Of Material Testing POY Testing Instruments Carbonation chamberThermal conductivity test apparatus of AAC BlocksFreeze-Thaw Chamber (ASTM C666)Accelerated Curing Tank Air Enterainment MeterCompaction Factor ApparatusDigital Compression Testing MachineFully Automatic Concrete Cube Compression Testing MachineCompression testing machine - Channel TypeCompression Testing Machine - Hand Operated Pillar typeConcrete Mixer - Laboratory TypeConcrete PenetrometerConcrete Permeability ApparatusConcrete Test HammerConcrete ThermometerCube MouldCylindrical MoldsExtensometer Fill Box for SCC TestFlexural Testing MachineFlow TableHydraulic Jack J Ring ApparatusLateral ExtensometerLongitudinal CompressometerNeedle Vibrator O Funnel ApparatusPoint Load Index TesterSlump Test ApparatusTile Abrasion TesterTile Flexural Testing Machine U Box V Funnel ApparatusVee Bee ConsistometerVibrating TableVolume Change Apparatus
Soil Testing Equipment Digital Triaxial Testing Machine. Autolevel Consolidometer. Bishop pore pressure apparatus. Coarse Sieves. Cone Penetrometer. Consolidation Test Apparatus. Constant Oil and Water Pressure Apparatus. Digital C.B.R. Apparatus.
Coriander seed is one of the many indispensable kitchen spices around the globe. In Asian kitchens it is an essential ingredient of Masalas, Sambhar, Rasam etc. While outside of Asia it is used in pickling of vegetables, making sausages and rye breads and also while brewing the Belgian wheat beer. Botanical Name: Coriandrum sativum Indian Name: Dhaniya Other Names : Chinese parsley, Cilantro, Pak chee Drying: Sun Dried Cleaning: Auto Sortexed Specifications : Purity: 99% Admixture: 1% max Split: 5% Moisture: 9% max Total ash: 8.000 % max (dry basis) Volatile oil: 0.2% min Count: 70- 90 Seeds per gram Cleaning: machine cleaned GMO Status: Not genetically modified Packing : Primary : 25 Kg, 40 Kg PP or Jute Bags Container 20' HC (09 MT) 40' HC (20 MT) Stuffing in container :Manual stacking, un-palletized Source: India Port of Loading: Kandla, Mundra Inspection: SGS, Control Union or Customer specified agency [Optional : inspection fee extra] Harvesting: Coriander seed crop is harvested during January to March.
BFA brown fused alumina powder for Grinding stone Brown aluminum oxide crystals is made of bauxite/anthracite coal, and smelted in electric-arc furnace of high temperature more than 2000degrees.Abrasives tools made by brown fused alumina are suitable for metal with high tensile (like:steel, malleable iron, bronze etc).and suitable for grinding, polishing, blasting, precision casting etc.Brown aluminum oxide crystal is also used for refractory material. Brown aluminum oxide crystals with characteristics like: high purity, good crystalline liquidity, low coefficient of linear expansion, corrosion resistance, high temperature, high strength. Chemical analysis: Al2O3(min) 92% SiO2(max) 2% Fe2O3(max) 2% TiO2(max) 4% Physical characteristics: color Brown Mohs Hardness 9.0 Melting point 2250â?? Maximum service temperature 1850â?? Bulk density 1.53-1.99g/cm3 Specific gravity 3.6-3.9g/cm3 Purpose: 1.grinding for konescope/glass/monocryst alline silicon/lens/jadeware 2.abrasion-proof material for expressway/airstrip/dock/ parking lot/stadium 3.bonded abrasives and coated abrasives 4.surface preparation and finishing 5.Thermal Spraying(Plasma Spraying) 6.Super Refractories, Ceramics and Tiles 7.Lapping & Micro-blasting applications Other models: Grain 0-1mm 1-3mm 3-5mm 5-8mm Fine powder 0-100mesh 0-200mesh 0-320mesh Grit 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220# Micro powder (FEPA)F230 F240 F280 F320 F360 F400 F500 F600 F800 (JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000
brown fused alumina grinding Brown aluminum oxide crystals is made of bauxite/anthracite coal, and smelted in electric-arc furnace of high temperature more than 2000degrees.Abrasives tools made by brown fused alumina are suitable for metal with high tensile (like:steel, malleable iron, bronze etc).and suitable for grinding, polishing, blasting, precision casting etc.Brown aluminum oxide crystal is also used for refractory material. Brown aluminum oxide crystals with characteristics like: high purity, good crystalline liquidity, low coefficient of linear expansion, corrosion resistance, high temperature, high strength. Chemical analysis: Al2O3(min) 92% SiO2(max) 2% Fe2O3(max) 2% TiO2(max) 4% Physical characteristics: color Brown Mohs Hardness 9.0 Melting point 2250â?? Maximum service temperature 1850â?? Bulk density 1.53-1.99g/cm3 Specific gravity 3.6-3.9g/cm3 Purpose: 1.grinding for konescope/glass/monocryst alline silicon/lens/jadeware 2.abrasion-proof material for expressway/airstrip/dock/ parking lot/stadium 3.bonded abrasives and coated abrasives 4.surface preparation and finishing 5.Thermal Spraying(Plasma Spraying) 6.Super Refractories, Ceramics and Tiles 7.Lapping & Micro-blasting applications Other models: Grain 0-1mm 1-3mm 3-5mm 5-8mm Fine powder 0-100mesh 0-200mesh 0-320mesh Grit 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220# Micro powder (FEPA)F230 F240 F280 F320 F360 F400 F500 F600 F800 (JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000
Bonded Tools Cup Grinding Wheel Abrasive Grains Brown Fused Alumina Brown aluminum oxide crystals is made of bauxite/anthracite coal, and smelted in electric-arc furnace of high temperature more than 2000degrees.Abrasives tools made by brown fused alumina are suitable for metal with high tensile (like:steel, malleable iron, bronze etc).and suitable for grinding, polishing, blasting, precision casting etc.Brown aluminum oxide crystal is also used for refractory material. Brown aluminum oxide crystals with characteristics like: high purity, good crystalline liquidity, low coefficient of linear expansion, corrosion resistance, high temperature, high strength. Chemical analysis: Al2O3(min) 92% SiO2(max) 2% Fe2O3(max) 2% TiO2(max) 4% Physical characteristics: color Brown Mohs Hardness 9.0 Melting point 2250â?? Maximum service temperature 1850â?? Bulk density 1.53-1.99g/cm3 Specific gravity 3.6-3.9g/cm3 Purpose: 1.grinding for konescope/glass/monocryst alline silicon/lens/jadeware 2.abrasion-proof material for expressway/airstrip/dock/ parking lot/stadium 3.bonded abrasives and coated abrasives 4.surface preparation and finishing 5.Thermal Spraying(Plasma Spraying) 6.Super Refractories, Ceramics and Tiles 7.Lapping & Micro-blasting applications Other models: Grain 0-1mm 1-3mm 3-5mm 5-8mm Fine powder 0-100mesh 0-200mesh 0-320mesh Grit 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220# Micro powder (FEPA)F230 F240 F280 F320 F360 F400 F500 F600 F800 (JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000
White fused alumian/corundum is an artificial corundum abrasive, the main component of aluminum oxide (Al2O3), and contains a small amount of iron oxide, silicon oxide, etc., the color was white. White corundum high quality alumina powder as raw material, refined crystalline and fused into, there are dense texture, high hardness, high temperature, acid corrosion, thermal stability properties. particles cusp form for use in the manufacture of ceramics, resin bonded abrasives and grinding, polishing, blasting, precision casting, can also be used to manufacture advanced refractory. Application 1.Spraying and grinding. 2.High-end products, crafts or hardware products surface beautification processing. 3.Precision casting, silicon crystal cutting, advanced refractories and ceramic additives. 4.Bonded abrasives and coated abrasives. 5.Processing harder and stronger tensile strength materials such as quenching steel, alloy steel, high speed steel and high carbon steel. 6.Ultra-precision Grinding and Polishing in Crystal and Electronics Industry, Precise Surface Treatment of Metal and Optical Products 7.Contact media, insulators and precision casting sand Size Sectional sand 0-1mm 1-3mm 3-5mm 5-8mm Fines 100#-0 200#-0 320#-0 Grains 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220# 240# Micro powder W--- W63 W50 W40 W28 W20 W14 W10 W7 W5 W3.5 W2.5 W1.5 W0.5 GB---240# 280# 320# 400# 500# 600# 800# 1000# 1200# 1500# 2000# 2500# 3000# JIS---#240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000 #2500 #3000 #4000 #6000 #8000 FEPA---F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500 F2000
Feature Drive headsteel fabricated enclosure inside which is installed the drive assembly consisting of a set of balanced pulleys, v belts, electric motor and motor tensioning device. The drive head is of hinged type construction which can be opened for maintenance.Main shaft and grinding basketss 304 shaft duly machined and balanced is provided. The shaft is installed in a bearing housing provided with taper roller bearings. Lubrication points are provided on the housing. The grinding basket is made from special steel to withstand high wear and tear. The double jacket cooling grinding basket is optional. Main technical data Type Power (kw) Speed (rpm) Batch capacity (l) Pump power (kw) Basket volume (l) Lifting height (mm) Esbm-4.0 4 0í½1450 30í½100 0.55 2 600 Esbm-7.5 7.5 0í½1450 50í½200 0.75 4 700 Esbm-11 11 0í½1450 80í½250 .1.1 6 800 Esbm-15 15 0í½1500 150í½350 1.1 10 900 Esbm-18.5 18.5 0í½1450 250í½500 1.1 16 1000 Esbm-22 22 0í½1450 500í½800 1.5 20 1100 Esbm-30 30 0í½1450 800í½1000 1.5 25 1200 Esbm-37 37 0í½1000 1000í½1200 2.2 37 1300 Esbm-55 55 0í½1000 1300í½1800 2.2 51 1500 Esbm-75 75 0í½800 1800í½2500 4.0 75 1600 1set/wooden case
Full Automatic textile cardboard Cones Machine for Paper Cone Manufacturer is a fully auto paper cone production line for textile industry. It is controlled by Delta PLC. It consists of paper cone winding unit, electric heating drying oven, and paper cone finishing unit. The whole paper cone production process is as follows, Jumbo paper reel feeding Inside and outside printing Paper edge grinding paper cutting paper cone winding & trimming Paper cone drying Unfinished products collecting V-shaped notching Line pressing Head curling (Bull nosing) Grinding Final products collecting. Full Automatic cardboard cones Machine for Paper Cone Manufacturer Technical parameters Speed: 48pcs/min Cone size: 5deg.57, 4deg.20 or 3deg.30 (optional) Applicable paper: 320-450gsm Applicable glue: white glue Compressed air: 1.2m3/min, 0.8MPa Power: 47KW/380V/50HZ/3Phases Operator: 2~3persons/shift Weight: ~15T Needed working space: 14000mm X 8000mm X 5000mm
High speed extrusion lines Features: The extrusion machine is designed for producing pp/hdpe flat yarn. Maximum pp melting output. Capacity is 150350 kg.Hr, and the unit is equipped with a tube filter and rotary blade slitting system. The machine has less down time and prevents production loss. The pressure rollers of the take-off unit are pneumatically controlled, and have synchronized control electronic system. European screw, gearbox, static mixer, auto screen filter changer and human machinery interface fibrillator are available to meet special requirements Tensile strength 4.5kg-5kg per 1.000 denier Special request 6.5kg per 1.000 denier Flat yarn denier : 700-1.500 denier Special request : 1.000-6.000 denier Stretching ratio : 3-9 times Quenching system : water bath or chill roll
High speed extrusion lines Features : the extrusion machine is designed for producing pp/hdpe flat yarn. Maximum pp melting output. Capacity is 150-350 kg.Hr, and the unit is equipped with a tube filter and rotary blade slitting system. The machine has less down time and prevents production loss. The pressure rollers of the take-off unit are pneumatically controlled, and have synchronized control electronic system. European screw, gearbox, static mixer, auto screen filter changer and human machinery interface fibrillator are available to meet special requirements Tensile strength 4.5kg-5kg per 1.000 denier Special request 6.5kg per 1.000 denier Flat yarn denier : 700-1.500 denier Special request : 1.000-6.000 denier Stretching ratio : 3-9 times Quenching system : water bath or chill roll
FEATURES: The extrusion machine is designed for producing PP/HDPE flat yarn. Maximum PP melting output. Capacity is 100-150&200-300 kg.hr, and the unit is equipped with a tube filter and rotary blade slitting system. The machine has less down time and prevents production loss. The pressure rollers of the take-off unit are pneumatically controlled, and have synchronized control electronic system. European screw, gearbox, static mixer, auto screen filter changer and human machinery interface fibrillator are available to meet special requirements. Tensile strength 4.5kg-5kg per 1.000 Denier Special request 6.5kg per 1.000 Denier Flat yarn denier : 700-1.500 Denier Special request : 1.000-6.000 Denier Stretching Ratio : 3-9 Times Quenching system : water bath or chill roll
High speed extrusion lines FEATURES: The extrusion machine is designed for producing PP/HDPE flat yarn. Maximum PP melting output. Capacity is 150~350 kg.hr, and the unit is equipped with a tube filter and rotary blade slitting system. The machine has less down time and prevents production loss. The pressure rollers of the take-off unit are pneumatically controlled, and have synchronized control electronic system. European screw, gearbox, static mixer, auto screen filter changer and human machinery interface fibrillator are available to meet special requirements Tensile strength 4.5kg-5kg per 1.000 Denier Special request 6.5kg per 1.000 Denier Flat yarn denier : 700-1.500 Denier Special request : 1.000-6.000 Denier Stretching Ratio : 3-9 Times Quenching system : water bath or chill roll
High speed extrusion lines Features: The extrusion machine is designed for producing pp/hdpe flat yarn. Maximum pp melting output. Capacity is 150~350 kg.Hr, and the unit is equipped with a tube filter and rotary blade slitting system. The machine has less down time and prevents production loss. The pressure rollers of the take-off unit are pneumatically controlled, and have synchronized control electronic system. European screw, gearbox, static mixer, auto screen filter changer and human machinery interface fibrillator are available to meet special requirements Tensile strength 4.5kg-5kg per 1.000 denier Special request 6.5kg per 1.000 denier Flat yarn denier : 700-1.500 denier Special request : 1.000-6.000 denier Stretching ratio : 3-9 times Quenching system : water bath or chill roll
FEATURES: The extrusion machine is designed for producing PP/HDPE flat yarn. Maximum PP melting output. Capacity is 150-350 kg.hr, and the unit is equipped with a tube filter and rotary blade slitting system. The machine has less down time and prevents production loss. The pressure rollers of the take-off unit are pneumatically controlled, and have synchronized control electronic system. European screw, gearbox, static mixer, auto screen filter changer and human machinery interface fibrillator are available to meet special requirements. Tensile strength 4.5kg-5kg per 1.000 Denier Special request 6.5kg per 1.000 Denier Flat yarn denier : 700-1.500 Denier Special request : 1.000-6.000 Denier Stretching Ratio : 3-9 Times Quenching system : water bath or chill roll
All the steel are used the noted chinese steel plant products or based on the customer specific requirements or product them according to our chinese national standard. Availability size: based on the customerf+s requirements Color: silver white or based on the customerf+s requirements Package: wrapped with felt cloth or rubber mat and fix them by iron wire in case of collision or bump Terms of payment: l/c, t/t Capacity: 30, 000tons/year Delivery time: one month or based on the customers' needs Welded requirements: 1 we used co2 welding and submerged arc auto welding or other methods. 2 welded seam shall be full penetration and grinded.
