Most Muti-layer Stainless Steel Sintered Mesh Filter Element, including conventional and pleated types, are constructed of premium stainless steel. The pleated type sintered mesh filter cartridge has a greater filtering surface than the conventional type, and both have strong mechanical strength and pressure tolerance. They resist corrosion and are simple to clean. Sintered mesh filter cartridges are used in the liquid and gas filtration, chemical fiber filtration, polyester, and water treatment sectors because of their great resilience and long service life. The protective layer, filter layer, and support layer make up the Muti-layer Stainless Steel Sintered Mesh Filter Element. The multi-layer sintered laminates contain the fine woven wire mesh (the filter layer). The laminates shield the fine mesh from mechanical harm caused by pressure from the outside environment. The mechanical strength, stability, and longevity of the three, four, and five layers make them attractive. Parameter Material: stainless steel 304, 304L, 316, 316L Length: 10-1500mm Diameter: 10-80mm Wall thickness: 10-50mm Filtration accuracy: 0.2-300um Layers: Single, 2 to 3, 5-layer & 6-layer or customized Porosity: 35%-80% Service temperature: -200 C to 1000 C Features: 1.) Better mechanical properties; 2.) Good stable pore size; 3.) Easy cleaning, reusable and durable; 4.) Stable pore shapes for perfect permeability; 5.) Reliable quality, big particles filtration; 6.) Attractive surface; 7.) Excellent anti-acid, anti-alkahi, resist-temperature, resist-wearing; resist-recycling; Application 1.) Oil & Gas production 2.) Water treatment; 3.) Food and beverage; Â 4.) Pharmacy; Â 5.) Chemical industry; 6.) Polymer filtration; Â 7.) Refine; Â 8.) Energy & nuclear. Process Description Through a number of technological procedures, sintered wire mesh is created. To achieve adequate contact at wire mesh intersections, precision woven wire mesh is evenly calendered.Then, under mechanical pressure in unique fixtures inside a hot furnace, one or more layers of this calendered web are laminated. The furnace is heated to the sintering temperature while being surrounded by a special environment of inert gas.The individual wires and each layer of wire have been bonded together after being carefully cooled, making the mesh solid. Compared to ceramics and sintered metal powder/particles, it has more favorable overall characteristics. Sintered mesh filters are very durable. The filter element, which is simple to maintain and has a long lifespan, can be created without the need for internal assistance.
The stainless steel filter is a type of metal porous filter element made from industrial metal powder, typically 304 or 316L. The raw material is formed through cold isostatic pressing and then sintered under high temperature and high vacuum conditions. The resulting filter element contains countless micropores that are curved, criss-crossed, and highly precise, allowing for deep-level precision filtration through pressurization. Product parameters Outer diameter: 20 100mm Length: 100 1500mm (more than 1500mm can be welded) Filtration accuracy: 0.5um 50um Porosity: 35-45% Features Here are four key features of the stainless steel filter: 1.Precise and uniform porosity: The stainless steel filter boasts highly accurate and uniform porosity, which ensures precision in filtration. The countless micropores inside the filter are curved, criss-crossed, and highly precise, allowing for deep-level precision filtration through pressurization. 2.Excellent mechanical properties: The filter has excellent mechanical properties, including impact resistance and alternating load. It has a stable shape with low resistance to filtration, enabling high permeability. 3.High-temperature resistance: The stainless steel filter has a high temperature resistance of up to 600, making it suitable for use in high-temperature environments. It exhibits a stable separation effect, and its good chemical stability provides high resistance to corrosion at high temperatures. 4.Easy to regenerate: The filter is easy to regenerate, enabling simple reverse cleaning and ensuring an extended service life. It is easy to weld, with seamless welding lengths of up to 1500mm, and the filter is highly versatile, making it suitable for use in a wide variety of applications. Application With its unique porous technology, stainless steel filters are widely used across a range of industries, including the petrochemical, coal chemical, pharmaceutical, water treatment, food, metallurgical, and gas purification fields. The filter is a new type of filtration and separation technology material that can be used for various applications, such as terminal filtration of petroleum products, fly ash filtration in the coal chemical industry, impurity removal and filtration of raw materials in the pharmaceutical and chemical industry, water purification, and filtration after ozone sterilization in the water treatment industry, and clarification and filtration of milk, beverages, beer, mineral water, and vegetable oil in the food industry. Processing: The production process of stainless steel filters involves monitoring all raw materials, including the metallurgical composition, particle size distribution, and bulk ratio of the metal powder. After being formed through cold isostatic pressing, the filter is sintered at high temperature and high vacuum.
Description Pup Joint, also referred to as Riser Spool, or Surface Riser Spool is a pressure-containing piece of equipment having end connections, used below or between drill-through equipment. The Spacer spool is a wellhead section that has no provision for suspension of tubular members and which may have no provision for sealing of tubular members. It is used to provide separation between two components with equal-sized end connections. providing exceptional performance as a wellhead extension, securing connection for choke manifold and kill manifold. Features A. Flanged, studded, and rubbed ends are available in any combination. B. We can produce a spacer spool for any combination of size and pressure ratings. C. Integral forged material ensures excellent reliable working performance. D. spacer spools are designed to minimize length while allowing sufficient clearance for wrenches or clamps unless otherwise specified by the customers. E. The standard Spacer Spools do not include outlets, although outlets can be added as per request. F. Our spacer spool is suitable for general working conditions and sour service. G. Stainless Steel 316L or Inconel 625 corrosion-resistant alloy ring grooves are also available. H. Normally we will provide tap-end studs and nuts with studded-end connections. Technical Parameters Product Name: Spacer Spool, Riser Spool, Pup Spool, Pup Joint Pipe, Pup Joint Bore Size: 1-13/16", 2-1/16", 4-1/16", 5-1/8", 7-1/16", 13-5/8", 20-3/4", 21-1/4" or customized Overall Length(OAL)/Height: As per customers' requirements Connection: API 6A Flange, API 16A Clamp, WECO Union Standards: API Spec 6A, NACE MR0175, Working Pressure: 3000 PSI to 20000 PSI Material Class: AA, BB, CC DD, EE, FF Material: Made from high-strength alloy AISI 4130 (Integral Forged) 60K, 75K, and processed especially with heating treatment, suitable for H2S environment. Temperature level: Working Medium: Oil, Natural Gas, Mud Performance Requirement: PR1, PR2 Product Specification Level: PSL1, PSL2, PSL3, PSL4 Paint Color: Red, Blue, or Customized
5 Ton Capacity Electric Winch. Motor CROMPTON/ GEC/ KIRLOSKER" Make Slipring Crane Duty Motor 960 RPM, 440 Volt, 3 phase, 1 Hr. rated 40% ED as per IS: 325 having 'B' Class insulation. Drum Made from Rolled steel as per IS:226 of adequate thickness with side flange. Drum running on Bearing to take adequate rope length. Shaft Forged from EN-8 steel machine fitted with Drum. Chassis: Fabricated from joist of adequate size as per IS: 226 to take all shocks. All the stands on the chassis are Boxed type. Reduction 1st Reduction: through Elecon/Radicon make worm reduction Gear Box totally enclosed running on oil. 2nd Reduction: through open machine cut Gear from carbon steel & pinion made of Alloy Steel duly heat treated. Break Electro Magnetic Hydraulic Thruster Brake of reputed make. Mechanical Bend Brake with screw system with Ferrodo Brake lineing. Extra safety Ratchet pawl arrangement on the side of the drum for not moving the drum in opposite direction for extra safety. Coupling We will provide flex. Brake Drum coupling on the out put of motor & Input of Gear Box. Flex. coupling pin type on the output shaft of the Gear Box & In put shaft of the pinion. Controls Drum controller of TAC Make 5/7 steps. Forward & Reverse mtio. Control panel in sheet in sheet metal Box for dust, heat & water resistance containing of : Isolator Overload Relay Contector Single phase preventor FuseHrc. Amp. Meter Voilt Meter (h) Neon Lamp Push Button for start & Stop Resistance Box 10 Minute rating. Wiring & Pairrting We will provide all wiring from weather proof ar mured copper cable of adequate size & the Winch will be painted by two coats of primer & Two coats of Grey paint. Operator seat We will provided operator seat by the side of controls. Note Speed of 5 Ton & 10 Ton winch is 8/1OMTS per minutes. General Description SKID Frame Type- Frame made out of heavy steel sections M.S. Drums M. S. Gear & Pinion. Teeth Cut on Gear Hobbing Machine for Perfect Pitch. Reduction through Gear Box and Bull Gear & Pinion. Hydraulic Thrustor Brake ElectroMagneticBrake Electro Magnetic Brake. Manual Brake Carbon Steel Shaft A Safety Ratchet System All controls within reach of operator. Variable Speed Motor. Load & Speed as per Requirement of the Customer. Detail required for submission by Customer Rope pull in Tons ( Capacity) Speed required Mtr./per Min. Rope size & Length required on Drum. Available Elec. Current supply. Description of Application. Other accessories required with.
Introduction Screw extruding sigma kneader----the best choice for high-viscosity materials,it consists of two "U" shape container made of either Mild Steel or Stainless Steel(SUS304, SUS321, SUS316L), with jacket of Carbon Steel covering two sides for heating or cooling. The mixing elements of the double sigma mixer are two pieces of Z type casted steel blades. They contrarily rotate inward and are fitted at close or specific clearance with the mixing chamber to finish thorough and uniform mixing. The two blades rotate at different speed(usually about3/2). We can make different kinds of double sigma mixer according to the customer's different demands, For example, vacuum system, heating or cooling methods, feeding hole, discharging methods, changeable liner, filtration net, safety valve, view glasses, Cover opening methods and so on. 1. Working Principles: Screw extruding sigma kneader is used to knead, mix, crush, disperse and re-polymerize high viscosity paste or elastoplastic materials, which can not be processed by the general powder mixers and liquid blenders. Screw extruding sigma kneader is the ideal equipment for all kinds of chemical products and has the merits of stirring evenly, kneading efficiently and no dead corner. The materials are scraped, stretched, folded and squeezed among the blade, slot wall, and ridge-like protrusions. The materials cycle from one end of the impeller to the other. The two mixing paddles are tangent and spin at different speeds to complet the kneading process. Tilt the slot to discharge the materials. 2. Uses: Screw extruding sigma kneader is widely applied to produce high viscosity sealant, silicone rubber, neutral and acidic glass cement, chewing gum, bubble gum, paper pulp, cellulose, and is also used in batteries, ink, pigments, dyes, pharmaceuticals, resins, plastics, rubber, cosmetics and other industries. 3. Category: There are four kinds of Double sigma mixer: Vacuum kneader, pressure kneader, atmospheric pressure kneader and high temperature kneader. It has three ways of discharging:Hydraulic tumbling discharge, ball valve type and screw extrusion type. 4. Characteristics: Control and record the temperature, time, viscosity and other relevant data through the PLC in real time during production. The parts of the cylinder and the blade that contact with the materials are made of stainless steel, to ensure product's quality. The kneader can be used for the high-viscosity paste or plastic solid with poor mobility around 5000PA. S, and the jacket can be heated or cooled by the heat transfer oil or water. According to the special needs, the plant can be designed to operate in vacuum. The difference between the speed of biax is 7.52r/min, so that the material is constantly changed, fastly mixed and has a larger transfer area for unit volume.
animal salt mineral licking block press machine technical characteristics 1, using advanced PLC hydraulic transmission technology, high technology, low failure rate, high degree of automation, high efficiency. 2, the host structure is compact, small footprint, easy to move and transport. 3, four-oriented structure, molding pressure, high density of pressed products, not broken. 4, hydraulic pump station structure design is reasonable, highly concentrated hydraulic control valve block and a unique design of the hydraulic system to make the hydraulic system perfect, and effectively achieve the continuity of normal production. 5, replace the mold can live Participation in various specifications of the salt block, weighing up to 2kg ~ 25kg, to achieve the product diversification needs and reduce investment costs. 6, the electrical control program to achieve a human-computer interaction, simple operation, convenient and quick. 7, low failure rate, heat a small, high efficiency, energy saving and durable. high efficiency animal salt mineral licking block press machine for livestock high efficiency animal salt mineral licking block press machine for livestock high efficiency animal salt mineral licking block press machine for livestock features 1, the host rack with cast steel structure, good rigidity, high strength, will not be deformed, extending the service life of salt block press machine for livestock. 2, in the middle of the mold according to the needs of users removable , with different molds can produce different size specifications of the product, to achieve the product diversification requirements. 3, hydraulic pump station structure design is reasonable, the hydraulic valve centralized device and the optimal design of the hydraulic system makes the hydraulic system perfect, improve the performance of the equipment. 4, the perfect hydraulic system to ensure that the equipment can withstand greater load, long-term trouble-free production, improve work efficiency. 5, the configuration of the cooler to ensure that the salt mineral licking block press machine will not affect the hydraulic system due to overheating oil production failure. 6, electrical control cabinet technology to improve the use of advanced display text controller to facilitate user control, and low failure rate. Packaging & Shipping Packaging Details Internal plastic moisture-proof anti-rust packaging, External wooden packaging, Exclusive container transport. Delivery Time 10-40days after order
1. Efficient heat transfer Gasketed plate-and-frame heat exchangers (GPHEs) provide efficient heat transfer in compact equipment with a small footprint - much smaller and more efficient than shell-and-tube heat exchangers. Plate heat exchangers are designed to optimize heat transfer, because the corrugated plates provide by far the greatest surface area through which the heat can be drawn from one gas or liquid to the other.The units also have a flexible design and are easy to service and maintain. 2. Types of gasketed plate heat exchangers Industrial -extremely versatile range of heat exchangers for use in all types of industries Industrial semi-welded -used in refrigeration when gaskets are not suitable for one of the media and when higher design pressures are needed WideGap -used for applications involving fibrous liquids, highly viscous fluids, and fluids containing coarse particles evaporators-tailor-made, rising film plate surface evaporator condensers -a compact, plate surface vacuum condenser Material available for 0.5 & 0.6mm 304SS, 316SS, Titanium, ASMO254, Hastelloy C-276, Nickel Ni201, 904L More details please contact us directly . 3. Packing&Delivery Package details: standard export plywood case & carton & customizing according to your requirements. Delivery time: within 10 working days after received the deposit and confirmed all details. 4. Our Advantages: a. Competent in suppling various types plate heat exchangers, and also make plate mould according to customer requirements. b. High quality products, best services and competitive prices. c. Large stock: We keep some regular models pares in stock, so fast delivery. d. Technical service: technical consultation, equipment update, capacity expansion scheme, maintenance and cleaning of the equipment. e. ISO9001&ISO14001: 2008 international quality&environment management standard certification f. Strict quality control systems, PHE: pressure testing; plates: size measuring, quality checking; gaskets:thickness/length/width measuring. 5. Applicationï¼? They are widely used in duties for heating, cooling, heat recovery, evaporation and condensation in industries ranging from HVAC, refrigeration, engine cooling, dairy and food to heavier processes like chemical processing, oil production and power generation.
Description Two component Epoxy based anticorrosive primer containing red oxide and zinc phosphate as corrosion inhibiting pigments Recommended Use :- This product is recommended as a primer on suitably cleaned mild steel surface in various fertilizer units, refineries, chemical and other plants, transportation industries, steel plants, cement plants, power plants, pulp and paper industries, pharmaceutical industries, etc. for application on tank exteriors, structural steel, pipelines, machineries, vessels, etc. The product is recommended as a primer for mild to moderate corrosion conditions. Not to be recommended for immersed water condition. Physical Data :- COLOUR : Red FINISH : Matt SOLIDS BY VOLUME : 40 ± 3% THEORETICAL SPREADING RATE : 13.33 sq.mt. / ltr. at DFT of 30 �µ FLASH POINT : Base : Above 23�°C Hardener : Above 23�°C DRYING CHARACTERISTICS (At 300 C & 65% Relative Humidity) : HARD DRY : Overnight FULL CURE : 7 days SHELF LIFE : BASE : 6 months HARDENER : 6 months Surface Preparation Abrasive blasting to Sa 21/2 Swedish Standards is the best method of surface preparation. In case blasting is not possible, then the surface of steel should be cleaned to St-2/St-3 std. The surface should be absolutely dry, moisture and oil free before primer application. Application Data :- MIXING RATIO : Base : Hardener (As per our recommendations) APPLICATION : By Brush / By Conventional Spray THINNER : Epoxy Thinner 190 POT LIFE : 4 hours min at 30C RECOMMENDED DFT : 30 - 40 OVERCOATING INTERVAL : MIN : 8 hours MAX : 24 hours COMPATIBILITY : Can be over coated with Epoxy, PU, Chlorinated Rubber and Synthetic Enamel Finish Paints. Application Method Stir the Base part thoroughly. Mix the base and hardener as per our recommended ratio, by volume. Stir the mix, gently to attain homogeneity. Allow the mixture to stand still (maturation) for about 10-15 minutes to initiate the reaction. Application : By Brush / By Conventional Spray / By Airless Spray Generally no thinner is required for Brush application; however under adverse environmental conditions about 5% of thinner, by volume, can be added. Apply evenly in crossed manner, ensuring the uniform application. Use quality brushes for paint application. Add Epoxy Thinner Thinner into the mix, if required, depending on application method, and stir gently for few minutes. Strain the paint through Nylon filter cloth and apply uniformly over the surface. All equipments used for above should be properly clean. For Conventional Spray application :- Thinner : Epoxy Thinner 190 Addition : 10-15% Nozzle Orifice : 1.2 -1.4 mm Nozzle Pressure : 40-70 p.s.i. For Airless Spray application :- Thinner : Epoxy Thinner 190 Addition : Max 5% if required Nozzle Orifice : 0.37- 0.42mm Nozzle Pressure : 1400-1800 p.s.i.
Moringa is a protein packed green superfood with huge concentrations of Vitamins A, C, and E as well as minerals such as calcium, potassium and iron. Our moringa tea are made of this powerful plant from Aceh with 100% organic ingredients of the highest quality. Moringa Oleifera is a medicinal plant with more nutrients than any other herbal ingredient on earth. This is the reason it is called â??The Miracle Treeâ??. This plant was traditionally used in Asian countries to treat malnutrition, as an antioxidant, anti-inflammatory agent, immune system and energy booster. RAZIE MORINGA LEAF TEA - The Worldâ??s Most Superfood Benefit from natureâ??s finest multivitamin. Packed with over 90 essential ingredients including 20+ types of amino acids, 40+ antioxidants, 35+ anti-inflammatory compounds, key vitamins, minerals, protein, Omega 3, 6 and 9 oils and phytonutrients. The leaves are loaded with vitamins, minerals, essential amino acids, and more. Gram for gram, moringa leaf powder. ANTIOXIDANTS SUPPORT: Antioxidants and free radicals are naturally present in human body. Some of the antioxidants are built by our body itself. The body also builds free radicals as byproducts of cellular functions which are used to detoxify the body. Self-build antioxidant and free radicals do not affect the health in any way. IMMUNITY SUPPORT: Moringa is packed with all essential nutrients required to boost immunity. Protein plays the vital role in immune system. Protein synthesis is one of the major biological process which helps improving the function of the immune system. Vitamin A in moringa enhances the resisting ability of the body. It helps supports the immune system to defend against the organisms causing infections. The leaves are loaded with vitamins, minerals, essential amino acids, and more. Gram for gram, moringa leaf powder contains: 15X more Potassium than Bananas 10X more Vitamin A than Carrots 25X more Iron than Spinach 17X more Calcium than Milk 8X more Magnesium than Kale 20X more Vitamin E than Tofu 7X more Vitamin C than Oranges *Product Spesification* Quick Details Port: Aceh, Belawan - Indonesia Payment Terms: Western Union,T/ T,Paypal Supply Ability: 1200 Units per Month Brand Name: Razie Function: Immune & Anti-Fatigue Type: Herbal Supplements Place of Origin: Aceh Ingredient: moringa leaf Size: 35 Tea bag Product Name: Moringa tea Dosage Form: Capsules Model Number: Kelorazie Main function: Improve Immune System Packaging Detail: As per customer requirement *Packaging & Shipping* Packing: We will pack as per customer reiquirement. These small packages will be packed in cartons as per client requests.� Shipping: We will delivers the goods in 15-30 working days can also take more time as per the order quantity.
ASTM Ss 201 304 309S 310 316 904L 410 420 430 2205 2507 Welded Steel Pipe Seamless Stee Pipe Cold Hot Rolled Round Pipe Stainless Steel Pipe for Decoration Standards:ASTM, GB, JIS, DIN, EN, AISI,ASTM A312 / ASME SA312, GB/T 13296,GB/T 14975,GB/T 14976 Materials:Stainless Steel/Galvanized/Carbon/Aluminum/Alloy Steel/Cooper 200 Series:201, 202, 202cu, 204cu 300 Series:301,303,304,304/L/H, 305,314, 316/L/H/Ti, 317, 317L, 321, 347,347H, 309, 309S, 310S, 400 Series:409, 410, 416, 420, 430, 431, 440c, 441, 444, 446 Duplex Steel:904L, 2205(UNS S31803/S32205), 2507(UNS S32750), 2101, 2520, 2304, 254smo, 253mA,UNS S32760, Special:2507, 316Ti, 316LN, 347H, 317L, 310S, 253MA, RA330, 725LN, 724L etc. Size:10.3*1-2.41,13.7*2.24-3.02,17.1*2.31-3.2....1219*9.53-12.7 Length:1.0-12m or as customer's requst,fixed length random, Outer Diameter: Stainless Steel� Seamless Pipe:4mm-914.4mm Stainless Steel� Welded Pipe:single slit(�¦8mm-�¦630mm); girth(�¦630mm-�¦3000mm), Thickness: Stainless Steel� Seamless Pipe:0.6mm - 60mm Stainless Steel� Welded Pipe:single slit(0.5mm-25mm);girth(3mm-45mm) Manufacturing Shapes: Seamless Pipe:Hydraulic, Round, Square, Hex, Honed,Rectangular,Oval Welded Pipe:Plain End, Beveled End, Treaded One End, TBE (Treaded Both Ends) Surface Finish:No.1, No.4, No.8 Mirror Finish, 2B,Finish as per customer Requirements Surface:Mirror Polished/Polishing/Annealing/Pickling/Bright/Black Packing: Pipe/Tube/Bar:Plastic bags for each piece then packed in seaworthy wooden cases 1. each tube is packed with pipe end caps and plastic bag individually, then packed into woven belt or wooden box. 2. bundle packing. 3. as customer's requirement. Plate/Coil/Strip:Standard seaworthy packing(plastic&wooden) or according to the customer's requests Fittings(Elbows Tees, Nipples,  Unions  Bushings  Plugs etc.):1. Cartons without pallets.2. Cartons with pallets.3.Or as buyer's requirements. Application:Construction Material,Biuldings� Bridges,Building Decoration,Chemical� Industry,Car Manifold,Water Supply,Petroleum Pipeline,Water pipe,Boiler Pipe,Automobile Pipe,Hydraulic,Building and Equipmen,Pipeline Transport,Oil/Gas Drilling,Food/Beverage/Dairy,Chemical Industry,Commercial Tubing,etc Min order quantity: 1 metric tons or upon negotiation Delivery date: Min.7-15  days and negotiation Container size: 20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High)  24-26CBM 40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High) 54CBM 40ft HC:12032mm(Length)x2352mm(Width)x2698mm(High) 8CBM
Can you clean the TV screen with Melamine Foam Sponge Magic erasers are great cleaning tools for TV screens, but they can be quite abrasive. To ensure that you don t hurt your screen, you should use a soft cloth or a microfiber cloth when cleaning. This will remove any dirt, dust, or oils without hurting the screen. To prevent permanent damage to your television screen, you should follow the cleaning directives included with the television. Some cleaning liquids can damage the display and may even void your warranty. If you re unsure, consult your owner s manual. The Good Housekeeping Institute and Media and Tech Labs have developed a list of safe cleaning products and methods. The manuals can be downloaded in PDF format. Never apply excessive pressure when scrubber a television screen. Excess pressure may damage the protective coating on the screen and cause it to crack or break. Also, excessive pressure can lead to damage to your TV, LCD monitor, or laptop screen. It may even damage pixels on the screen. So, it is best to follow the recommended cleaning instructions. You won t ruin your expensive investment by trying this method. To clean a TV screen with a topeco-clean melamine sponge, make sure to turn the TV off before attempting this. If the screen is covered in crayons, use rubbing alcohol to the crayon marks. When the TV has completely dried, wipe it with a soft cloth to restore its shine. If you can t remove the crayon marks, you can use a microfiber cloth or soft cloth. If you are unsure of the best way to clean a television screen with a magic eraser, you should perform a test on a hidden area before using it on your screen. If you have the patience and persistence to test your cleaning product, you can be sure that your television screen will be clean. If it doesn t come out clean, try using a sanitized cloth and cleaning liquid. After the cleaning solution has dried, dry the microfiber magic sponge cloth and wipe it gently to remove any residue. Make sure to use a soft cloth to avoid scratching the screen. You should avoid using paper towels or tissues because they contain fibers that can damage the screen. A microfiber cloth is a safer alternative and will not leave any residue behind. You should also avoid using paper towels to wipe the screen, as they can cause scratches and leave behind a residue. If there are greasy smudges on the screen, you may want to use a damp cloth. Using water directly on the cloth will remove the greasy residue. But be sure to work carefully and in a circular motion. When using the magic sponge cleaning pad, you should remember to wear protective gloves while cleaning. The material is prone to rubbing on sensitive skin, so it s best to wear rubber gloves to protect your hands. Always use the eraser with utmost care. Avoid excessive pressure when cleaning your television screen. If you use too much pressure, you could damage your TV screen and even remove paint from your wall.
These are leaves which are harvested and dried from farms in Ghana (West Africa). They are organically grown and hand harvested to ensure high quality and a GMO-free status. The dried Moringa leaves can be used to brew your own tea without using teabags or enhance your daily salad. Our moringa leaves are grown organically by our patented that ensures you get the highest quality, Non-GMO moringa leaves. With 15 times the potassium of Bananas, 17 times the calcium in milk, and 19 of the 20 amino acids, our moringa leaves contain the rare combination of nutrients that make the Moringa tree so special. Besides, according to the current scientific research, the moringa leaves have specific medicinal benefits due to their unique and high nutritional value. They are said to regulate high and low pressure, and also hormonal and Cholesterol levels. They also prevent obesity by stimulating metabolism. Furthermore, Moringaâ??s antioxidant make has given this product anti-carcinogen and cleansing properties which get rid of bad cells from the body. Moringa leaves are packed with more than 90 essential ingredients including the 19 types of amino acids, more than 35 anti-inflammatory compounds, 40 plus antioxidants, minerals, protein, key vitamins, phytonutrients, Omega, 3, 6, and 9 oils. Only a few foods in the world can match the nutrition level provided by our dried Moringa leaves. Besides, our dried Moringa leaves are carefully sun-and-shade dried at an ideal low temperature so as to preserve its nutrients and swiftly packaged to maintain the freshness. Some of the sellers use industrial machines to heat, dry or freeze dry their Moringa leaves. We use the sun! You can see the results in the bright green colors and the early smell of Moringa. We get our Moringa leaves from the small organic farms where the Moringa tree originates. We can attest to the purity and quality of every Moringa product we sell. How we harvest the moringa leaves We strip the leaflets from moringa leaf petioles. This is done directly from the branches. After discarding the damaged leaves, we carefully wash the Moringa leaves to remove dirt. Once we are done with washing them, we naturally dry the leaves using the sunlight. Attributes Stimulates the sympathetic nerve endings Accelerates heartbeats and constrict blood vessels Inhibits movements of involuntary movements of gastrointestinal tract Acts as an antitubercular and used to treat leaver diseases In large quantities, it prevents the growth of fungus Inhibits of gram-positive and gram-negative bacteria Applications of Moringa leaves Applied in cosmetic field as a natural raw material of a neutral detergent and it can be added in hear shampoo and other detergents It is applied in health product field as raw of healthcare products to enhance the immune of a human body. As a raw material of drugs for anti-depressants, sedation, anti-tumor, and anti-bacterial, it is used in pharmaceutical fields
Dairy products, vegetables ,fruits, coffee ,tea ,spices ,rice ,almonds , cashew nuts , raw cashew nuts ,milling products , starch , mobile , laptop, electronics ,garments ,textiles, paper products ,banana ,grapes ,onion ,apple, potato , strawberry ,live trees , cargo pants , ceramic tiles ,plastics , imitation jewellery , oils,, edible oils, footwear, wood ,leather products , silk , jute product ,coconut , glass, green chilly , furniture , musical instruments , oil seeds ,sugar confectionery .
Soybeans (in grains) iron ore crude oil chicken meat cellulose coffee sugar beef corn soybean meal automobiles non alloyed aluminum crude oil iron ore (pellets) ferroalloys car bodies for automobiles sawn wood agricultural machinery and equipment leathers and hides oilseeds orange juice planes and helicopters pork meat soluble coffee earthmoving machinery and equipment floating platforms frozen fish vehicle components raw cotton iron and steel waste and scrap harvesting machinery vegetable oils plastics drilling equipment organic chemicals apparatus for filtering or purifying water machinery and equipment for food processing processed meats rice building materials electrical distribution equipment refrigeration equipment prepared foods paper and cardboard cotton fabrics tires plastic sheets and films paper and cardboard waste and scrap medical instruments wheat cotton.
Party supplies knitted & woven garments mens undergarments trousers & shorts bathrobes & swimwear used clothings aluminum foil kids swimwear light emitting diode children clothing and accessories clothing & accessories emerald gemstones (panna) smart watches aluminum foils ladies swimwear semi precious stones car accessories tourmaline gemstones wrist watches swimwear jewellery items iphones mens boxer shirts & t shirts mens swimwear pear traffic lights and signals party supplies and decorations topaz gemstones stainless steel pipes & pipe fittings disposable silver foil containers pillow cases blue sapphire gemstones (neelam) fitness equipments party garlands ruby gemstones (manikya) essential oils spice herbs.
I am supplier of various kinds product such as : soybean oil, super oil, palm oil, fragrance oil, tea leaves, cookies container, food container, garments clothes, t shirt, shirt, leather belt, leather shoes, leather sandals, leather bags, natural hair oil.
Raw Flax, Fabrics, Egyptian Cotton, Egyptian Linen, Garments, Shoes, Bags..
CASHEW NUT SHELL LIQUID CNSL or Cashew Shell Oil or Refined Cashew Nut Shell Oil is a versatile by-product of the Cashew industry. The nut has a shell of about 1/8 inch thickness inside which is a soft honey comb structure containing a dark reddish brown viscous liquid.It is called CASHEW NUT SHELL LIQUID or CNSL. Which is the pericap fluid of the Cashew Nut. It is often considered as the better and cheaper material for unsaturated phenols. CNSL has innumerable applications, such as friction linings, paints, laminating resins, rubber compounding resins, cashew cements, polyurethane based polymers, surfactants, epoxy resins, foundry chemicals, and intermediates for chemical industry. It offers much scope and varied opportunities for the development of other tailor-made polymers. CNSL undergoes all the conventional reactions of phenols, CNSL aldehyde condensation products and CNSL based phenolic Resins are used in applications such as surface coatings, adhesives. Various polyamines synthesised from CNSL are used s curing agents for epoxy resins. CNSL and its derivatives have been used as antioxidants, plasticizers, and processing aids for rubber compounds, modifiers for plastic materials and used to provide oxidative resistance sulphur-cured natural rubber products. It is also added to rubber gum stock or nit rile rubber to improve the processability, mechanical properties and resistance to crack and cut properties of the vulcanisates A number of products based on CNSL are used as antioxidants, stabilizers and demulsifies for petroleum products.Soluble metal derivatives of C.N.S.L are used to improve the resistance to oxidation and sludge formation of Lubricating oils.Oxidised CNSL and its derivatives are also used as demulsifying agents for water in oil type petroleum emulsions. CASHEW NUT SHELL LIQUID OIL used for manufacturing of CNSL Resin, Cardanol or Card Phenol or Cashew Phenol, Cashew Friction Dust, Anti corrosive hiring (lining) chemicals, Paints, Varnishes, Enamels, Insecticides and Fungicides, Cashew Laquers, Bakelite, Electrical conductress, Cashew Cements, Core Oil, Red Oxide, Wood, Fuel, Speciality Chemicals, Foundry Chemicals and many other Industries
Food ingredients, building materials, scraps, pvc scrap, oils, perfumes.
1. non ferrous materials including titanium/nickel bars, tubes, sheets; 2. metals clad materials including titanium/steel clad plate, nickel/steel clad plate, copper/steel clad plate, steel/steel clad plate, aluminum/steel clad plate, zirconium/titanium/steel clad plate; 3. non standard equipments including titanium condensers, titanium crystallization separator, titanium falling film separator, titanium mother liquor tank, titanium heat exchanger, titanium evaporator, titanium/nickel reactor, nickel evaporator, nickel heat exchanger; 4. processing parts including titanium coiled pipe, titanium centrifugal machine, titanium mother plate, titanium basket, titanium standard parts, titanium pipe fittings, titanium polymerizer, titanium dechlorinating tower, tower internals, titanium welded pipes, and so on. the products are widely used in petroleum, chemical, fertilizer, pharmaceutical, light industry, electric power, environmental protection, metallurgy and other industrial departments..