Model L086TIM Engine type 4 cycle, In line, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 315(232)/2300 Displacement( cc ) 8,071 Cylinder number - bore x stroke( mm ) 6 - 111x 139 Mean piston speed (m/sec. ) 10.66 Compression ratio 16.7 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 62 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 4.5 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 100 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 27 / 25 Fresh water pump type Centrifugal type, driven by V- belt Sea water pump type Rubber impeller type driven by gear Marine gear Model DMT110A (Dong-I) Gear ratio 1.77 2.09 2.42 2.82 3.19 Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) without M/G mm 1,364 x 919 x 965 with M. gear mm 1,552 x 919 x 1,062 Engine dry weight without M/G kg 790 with M. gear kg 1,015
Model L136TI Engine type 4 cycle In line direct injection water cooled with turbo charger inter cooler Rating output BHP PSkWrpm 2301692200 Displacement cc 8071 Cylinder number bore x stroke mm 6 111x 139 Mean piston speed msec 1019 Compression ratio 167 1 Firing order 1 5 3 6 2 4 Governor type of injection pump Mechanical all speed RSV Fuel consumption lit h 45 Starting system Electric Starting by starter motor Starter motor capacity V kW 24 45 Alternator capacity V A 24 50 Battery V Ah 24 100 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max Min lit 27 25 Fresh water pump type Centrifugal type driven by V belt Sea water pump type Rubber impeller type driven by gear Marine gear Model DMT110A DongI Gear ratio 177 209 242 282 319 Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size L x W x H without MG mm 1364 x 911 x 937 with M gear mm 1552 x 911 x 1027 Engine dry weight without MG kg 773 with M gear kg 994
Model L136T Engine type 4 cycle, In line, direct- injection, water cooled, with turbo charger Rating output (B.H.P) PS(kW)/rpm 200(147)/2200 Displacement( cc ) 8,071 Cylinder number - bore x stroke( mm ) 6 - 111x 139 Mean piston speed (m/sec. ) 10.19 Compression ratio 16.7 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 37 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 4.5 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 100 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 27 / 25 Fresh water pump type Centrifugal type, driven by V- belt Sea water pump type Rubber impeller type driven by gear Marine gear Model DMT90A (Dong-I) Gear ratio 1.61 2.06 2.45 2.82 3.12 3.46 Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) without M/G mm 1,351 x 893 x 937 with M. gear mm 1,351 x 893 x 937 Engine dry weight without M/G kg 748 with M. gear kg 938
Model L136 Engine type 4 cycle, In line, direct- injection, water cooled, aspirated naturally Rating output (B.H.P) PS(kW)/rpm 160(118)/2200 Displacement( cc ) 8,071 Cylinder number - bore x stroke( mm ) 6 - 111 x 139 Mean piston speed (m/sec. ) 10.19 Compression ratio 17.6 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 32 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 4.5 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 100 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 25 / 23 Fresh water pump type Centrifugal type, driven by V- belt Sea water pump type Rubber impeller type driven by gear Marine gear Model DMT90AF (Dong-I) Gear ratio 1.61 2.06 2.45 2.82 3.12 3.46 Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) without M/G mm 1,266 x 875 x 937 with M. gear mm 1,542 x 875 x 963 Engine dry weight without M/G kg 743 with M. gear kg 928
Product Details Type: Color offset paper/ Bristol Board Package: 100/200/2501500 sheets per pack or Customized Packing way Material: 100% Wood pulp paperWeight 70g,80g, 110g,150g, 180g, 220g and ect MOQ :1 ton Color Customized Decorative pattern Customized Sample Free for you Lead Time: About 15-45 days after the receipt of deposit Usage DlY, decoration, wrapping, perfect for an unlimited range of indoor and outdoor projects, including bulletin boards, banners, arts and crafts, and scenic design innovative, non-woven fabric that's easy to cut, fold, glue, sew and staple -even to paint and draw on Brilliant, non-fading colors Strong, flexible and won't fray. Packing & Delivery PACKING TIPS: 1. Roll packing 2.Sheet packing with strong PE film 3. Ream packing with strong craft paper 4.Customized packing Date of Delivery: usually 15-45 days but it should be negotiated again before order. We can help you to arrange the shipment by a (DHL, TNT, FEDEX,CHINA POS..) or by sea(please tell me the port name in your local). We can help you to find a most cost -effective shipping cost Remarks All colors and decorative pattern on the paper , we can customized for u , please be free to tell me your requirements.
RB 1530 portable CNC plasma flame cutting machine has two working modes: plasma cutting, and (flame) gas cutting. Usually plasma cutting machines are used for thickness less than 30mm metal cutting. The gas (flame) cutting machines are used for thickness 30-200mm iron/ steel cutting. Portable CNC plasma flame cutting machine features 1. Two cutting modes optional: plasma cutting and gas (flame) cutting. 2. This CNC plasma cutting machine moves by high precision gear and rack ,accurate running in high speed. 3. The operation is simple, fast, easy to learn the programming software. 4. Small cutting loss and typesetting software high material utilization. 5. Read U disk files through USB directly, convenient site operation. 6. The machine also has feature that automatic arc voltage torch height control, it can adjust cutting distance automatically. 7. It is easy to move, suitable for the site indoor or outdoor 8. Can automatically memorize and restore when power is off. Portable CNC plasma flame cutting machine parameters: Model RB-1530 Working Voltage AC 220V/380V, 50HZ Cutting Size 1500mm*3000mm Plasma Cutting Thickness 0-30mm,According to different power source Gas(flame) cutting Thickness 1-200mm Weight 230KGS Control System STARFIRE(FANGLING optional) Driving System LEADSHINE stepper motor Transmission Method Gear transmission Power Supplier HUAYUAN power or US HYPERTHERM Guide Rail Round rails Nesting Software FASTCAM
Filter Element Features: 1. Material: fiber glass;oil paper;ss mesh 2. Filtration efficiency: 99.9% 3. Filter rating: 1-25 um 4. Operating Pressure: 1.0Mpa, 2.0Mpa, 16.0Mpa, 210Mpa 5. Application field: Lubricating oil & hydraulic oil system 6. O-Ring: NBR, fluoro rubber � Filter Element Application: The hydraulic oil filter element is an indispensable part of the pipeline series of the conveying medium. It is usually installed in the inlet filter of the hydraulic system to filter out metal particles and contaminants in the fluid medium and to protect the normal operation of machinery and equipment. The application range of hydraulic oil filter elements is very wide, covering almost all industries: steel, electric power, metallurgy, shipbuilding, aviation, paper making, chemical industry, machine tools and construction machinery, construction machinery and other fields. Quality Standard: ISO 2941------Collapse & Burst Resistant ISO 2942------Fabrication & Integrity Test ISO 2943------Material Compatibility with Fluids ISO 3724------Flow Fatigue Characteristics ISO 3968------Pressure Drop vs. Flow Rate ISO 16889------Multi-pass Performance Testing Product Extension HQFILTRATION specializing in the production of imported high-efficiency hydraulic oil filter brands are : PALL filter element, HYDAC filter element, ARGO filter element, MAHLE filter element, FAIREY-ARLON-PARKER, INTERNORMEN, MP-FILTRI, DONALDSON, STAUFF, VICKERS , ALLISON , American Hankison series, British Domniek-hunter series, INDUFIL filter element, Ultyafiter series, Italy Hiross series, Germany Zender series, Japan SMC series, Italy BEA series, Sweden ATLAS- COPCO series, Sanling, Ivek, Detman, Perkins, Deutz, American CUMMINS , Japan YAMAHA , HONDA, IMC, Robin, MITSUBISHI , UK PERKINSROLLS-ROYCE, Bo Jones-Rolls Royce, Sweden Volvo-PENTA, China KAMA, yigtai, Demasson , Germany EATON Interton Mende Norman, DEMAG , DENISON , FuSheng , HAMM , VICKERS .
Filter Element Features: 1. Material: fiber glass;oil paper;ss mesh 2. Filtration efficiency: 99.9% 3. Filter rating: 1-25 um 4. Operating Pressure: 1.0Mpa, 2.0Mpa, 16.0Mpa, 210Mpa 5. Application field: Lubricating oil & hydraulic oil system 6. O-Ring: NBR, fluoro rubber � Filter Element Application: The hydraulic oil filter element is an indispensable part of the pipeline series of the conveying medium. It is usually installed in the inlet filter of the hydraulic system to filter out metal particles and contaminants in the fluid medium and to protect the normal operation of machinery and equipment. The application range of hydraulic oil filter elements is very wide, covering almost all industries: steel, electric power, metallurgy, shipbuilding, aviation, paper making, chemical industry, machine tools and construction machinery, construction machinery and other fields. Quality Standard: ISO 2941------Collapse & Burst Resistant ISO 2942------Fabrication & Integrity Test ISO 2943------Material Compatibility with Fluids ISO 3724------Flow Fatigue Characteristics ISO 3968------Pressure Drop vs. Flow Rate ISO 16889------Multi-pass Performance Testing Product Extension HQFILTRATION specializing in the production of imported high-efficiency hydraulic oil filter brands are : PALL filter element, HYDAC filter element, ARGO filter element, MAHLE filter element, FAIREY-ARLON-PARKER, INTERNORMEN, MP-FILTRI, DONALDSON, STAUFF, VICKERS , ALLISON , American Hankison series, British Domniek-hunter series, INDUFIL filter element, Ultyafiter series, Italy Hiross series, Germany Zender series, Japan SMC series, Italy BEA series, Sweden ATLAS- COPCO series, Sanling, Ivek, Detman, Perkins, Deutz, American CUMMINS , Japan YAMAHA , HONDA, IMC, Robin, MITSUBISHI , UK PERKINSROLLS-ROYCE, Bo Jones-Rolls Royce, Sweden Volvo-PENTA, China KAMA, yigtai, Demasson , Germany EATON Interton Mende Norman, DEMAG , DENISON , FuSheng , HAMM , VICKERS .
Filter Element Features: 1. Material: fiber glass;oil paper;ss mesh 2. Filtration efficiency: 99.9% 3. Filter rating: 1-25 um 4. Operating Pressure: 1.0Mpa, 2.0Mpa, 16.0Mpa, 210Mpa 5. Application field: Lubricating oil & hydraulic oil system 6. O-Ring: NBR, fluoro rubber � Filter Element Application: The hydraulic oil filter element is an indispensable part of the pipeline series of the conveying medium. It is usually installed in the inlet filter of the hydraulic system to filter out metal particles and contaminants in the fluid medium and to protect the normal operation of machinery and equipment. The application range of hydraulic oil filter elements is very wide, covering almost all industries: steel, electric power, metallurgy, shipbuilding, aviation, paper making, chemical industry, machine tools and construction machinery, construction machinery and other fields. Quality Standard: ISO 2941------Collapse & Burst Resistant ISO 2942------Fabrication & Integrity Test ISO 2943------Material Compatibility with Fluids ISO 3724------Flow Fatigue Characteristics ISO 3968------Pressure Drop vs. Flow Rate ISO 16889------Multi-pass Performance Testing Product Extension HQFILTRATION specializing in the production of imported high-efficiency hydraulic oil filter brands are : PALL filter element, HYDAC filter element, ARGO filter element, MAHLE filter element, FAIREY-ARLON-PARKER, INTERNORMEN, MP-FILTRI, DONALDSON, STAUFF, VICKERS , ALLISON , American Hankison series, British Domniek-hunter series, INDUFIL filter element, Ultyafiter series, Italy Hiross series, Germany Zender series, Japan SMC series, Italy BEA series, Sweden ATLAS- COPCO series, Sanling, Ivek, Detman, Perkins, Deutz, American CUMMINS , Japan YAMAHA , HONDA, IMC, Robin, MITSUBISHI , UK PERKINSROLLS-ROYCE, Bo Jones-Rolls Royce, Sweden Volvo-PENTA, China KAMA, yigtai, Demasson , Germany EATON Interton Mende Norman, DEMAG , DENISON , FuSheng , HAMM , VICKERS .
Filter Element Features: 1. Material: fiber glass;oil paper;ss mesh 2. Filtration efficiency: 99.9% 3. Filter rating: 1-25 um 4. Operating Pressure: 1.0Mpa, 2.0Mpa, 16.0Mpa, 210Mpa 5. Application field: Lubricating oil & hydraulic oil system 6. O-Ring: NBR, fluoro rubber � Filter Element Application: The hydraulic oil filter element is an indispensable part of the pipeline series of the conveying medium. It is usually installed in the inlet filter of the hydraulic system to filter out metal particles and contaminants in the fluid medium and to protect the normal operation of machinery and equipment. The application range of hydraulic oil filter elements is very wide, covering almost all industries: steel, electric power, metallurgy, shipbuilding, aviation, paper making, chemical industry, machine tools and construction machinery, construction machinery and other fields. Quality Standard: ISO 2941------Collapse & Burst Resistant ISO 2942------Fabrication & Integrity Test ISO 2943------Material Compatibility with Fluids ISO 3724------Flow Fatigue Characteristics ISO 3968------Pressure Drop vs. Flow Rate ISO 16889------Multi-pass Performance Testing Product Extension HQFILTRATION specializing in the production of imported high-efficiency hydraulic oil filter brands are : PALL filter element, HYDAC filter element, ARGO filter element, MAHLE filter element, FAIREY-ARLON-PARKER, INTERNORMEN, MP-FILTRI, DONALDSON, STAUFF, VICKERS , ALLISON , American Hankison series, British Domniek-hunter series, INDUFIL filter element, Ultyafiter series, Italy Hiross series, Germany Zender series, Japan SMC series, Italy BEA series, Sweden ATLAS- COPCO series, Sanling, Ivek, Detman, Perkins, Deutz, American CUMMINS , Japan YAMAHA , HONDA, IMC, Robin, MITSUBISHI , UK PERKINSROLLS-ROYCE, Bo Jones-Rolls Royce, Sweden Volvo-PENTA, China KAMA, yigtai, Demasson , Germany EATON Interton Mende Norman, DEMAG , DENISON , FuSheng , HAMM , VICKERS .
Filter Element Features: 1. Material: fiber glass;oil paper;ss mesh 2. Filtration efficiency: 99.9% 3. Filter rating: 1-25 um 4. Operating Pressure: 1.0Mpa, 2.0Mpa, 16.0Mpa, 210Mpa 5. Application field: Lubricating oil & hydraulic oil system 6. O-Ring: NBR, fluoro rubber � Filter Element Application: The hydraulic oil filter element is an indispensable part of the pipeline series of the conveying medium. It is usually installed in the inlet filter of the hydraulic system to filter out metal particles and contaminants in the fluid medium and to protect the normal operation of machinery and equipment. The application range of hydraulic oil filter elements is very wide, covering almost all industries: steel, electric power, metallurgy, shipbuilding, aviation, paper making, chemical industry, machine tools and construction machinery, construction machinery and other fields. Quality Standard: ISO 2941------Collapse & Burst Resistant ISO 2942------Fabrication & Integrity Test ISO 2943------Material Compatibility with Fluids ISO 3724------Flow Fatigue Characteristics ISO 3968------Pressure Drop vs. Flow Rate ISO 16889------Multi-pass Performance Testing Product Extension HQFILTRATION specializing in the production of imported high-efficiency hydraulic oil filter brands are : PALL filter element, HYDAC filter element, ARGO filter element, MAHLE filter element, FAIREY-ARLON-PARKER, INTERNORMEN, MP-FILTRI, DONALDSON, STAUFF, VICKERS , ALLISON , American Hankison series, British Domniek-hunter series, INDUFIL filter element, Ultyafiter series, Italy Hiross series, Germany Zender series, Japan SMC series, Italy BEA series, Sweden ATLAS- COPCO series, Sanling, Ivek, Detman, Perkins, Deutz, American CUMMINS , Japan YAMAHA , HONDA, IMC, Robin, MITSUBISHI , UK PERKINSROLLS-ROYCE, Bo Jones-Rolls Royce, Sweden Volvo-PENTA, China KAMA, yigtai, Demasson , Germany EATON Interton Mende Norman, DEMAG , DENISON , FuSheng , HAMM , VICKERS .
uters Filter Element Features: 1. Material: fiber glass;oil paper;ss mesh 2. Filtration efficiency: 99.9% 3. Filter rating: 1-25 um 4. Operating Pressure: 1.0Mpa, 2.0Mpa, 16.0Mpa, 210Mpa 5. Application field: Lubricating oil & hydraulic oil system 6. O-Ring: NBR, fluoro rubber � Filter Element Application: The hydraulic oil filter element is an indispensable part of the pipeline series of the conveying medium. It is usually installed in the inlet filter of the hydraulic system to filter out metal particles and contaminants in the fluid medium and to protect the normal operation of machinery and equipment. The application range of hydraulic oil filter elements is very wide, covering almost all industries: steel, electric power, metallurgy, shipbuilding, aviation, paper making, chemical industry, machine tools and construction machinery, construction machinery and other fields. Quality Standard: ISO 2941------Collapse & Burst Resistant ISO 2942------Fabrication & Integrity Test ISO 2943------Material Compatibility with Fluids ISO 3724------Flow Fatigue Characteristics ISO 3968------Pressure Drop vs. Flow Rate ISO 16889------Multi-pass Performance Testing Product Extension HQFILTRATION specializing in the production of imported high-efficiency hydraulic oil filter brands are : PALL filter element, HYDAC filter element, ARGO filter element, MAHLE filter element, FAIREY-ARLON-PARKER, INTERNORMEN, MP-FILTRI, DONALDSON, STAUFF, VICKERS , ALLISON , American Hankison series, British Domniek-hunter series, INDUFIL filter element, Ultyafiter series, Italy Hiross series, Germany Zender series, Japan SMC series, Italy BEA series, Sweden ATLAS- COPCO series, Sanling, Ivek, Detman, Perkins, Deutz, American CUMMINS , Japan YAMAHA , HONDA, IMC, Robin, MITSUBISHI , UK PERKINSROLLS-ROYCE, Bo Jones-Rolls Royce, Sweden Volvo-PENTA, China KAMA, yigtai, Demasson , Germany EATON Interton Mende Norman, DEMAG , DENISON , FuSheng , HAMM , VICKERS .
Filter Element Features: 1. Material: fiber glass;oil paper;ss mesh 2. Filtration efficiency: 99.9% 3. Filter rating: 1-25 um 4. Operating Pressure: 1.0Mpa, 2.0Mpa, 16.0Mpa, 210Mpa 5. Application field: Lubricating oil & hydraulic oil system 6. O-Ring: NBR, fluoro rubber � Filter Element Application: The hydraulic oil filter element is an indispensable part of the pipeline series of the conveying medium. It is usually installed in the inlet filter of the hydraulic system to filter out metal particles and contaminants in the fluid medium and to protect the normal operation of machinery and equipment. The application range of hydraulic oil filter elements is very wide, covering almost all industries: steel, electric power, metallurgy, shipbuilding, aviation, paper making, chemical industry, machine tools and construction machinery, construction machinery and other fields. Quality Standard: ISO 2941------Collapse & Burst Resistant ISO 2942------Fabrication & Integrity Test ISO 2943------Material Compatibility with Fluids ISO 3724------Flow Fatigue Characteristics ISO 3968------Pressure Drop vs. Flow Rate ISO 16889------Multi-pass Performance Testing Product Extension HQFILTRATION specializing in the production of imported high-efficiency hydraulic oil filter brands are : PALL filter element, HYDAC filter element, ARGO filter element, MAHLE filter element, FAIREY-ARLON-PARKER, INTERNORMEN, MP-FILTRI, DONALDSON, STAUFF, VICKERS , ALLISON , American Hankison series, British Domniek-hunter series, INDUFIL filter element, Ultyafiter series, Italy Hiross series, Germany Zender series, Japan SMC series, Italy BEA series, Sweden ATLAS- COPCO series, Sanling, Ivek, Detman, Perkins, Deutz, American CUMMINS , Japan YAMAHA , HONDA, IMC, Robin, MITSUBISHI , UK PERKINSROLLS-ROYCE, Bo Jones-Rolls Royce, Sweden Volvo-PENTA, China KAMA, yigtai, Demasson , Germany EATON Interton Mende Norman, DEMAG , DENISON , FuSheng , HAMM , VICKERS .
Filter Element Features: 1. Material: fiber glass;oil paper;ss mesh 2. Filtration efficiency: 99.9% 3. Filter rating: 1-25 um 4. Operating Pressure: 1.0Mpa, 2.0Mpa, 16.0Mpa, 210Mpa 5. Application field: Lubricating oil & hydraulic oil system 6. O-Ring: NBR, fluoro rubber � Filter Element Application: The hydraulic oil filter element is an indispensable part of the pipeline series of the conveying medium. It is usually installed in the inlet filter of the hydraulic system to filter out metal particles and contaminants in the fluid medium and to protect the normal operation of machinery and equipment. The application range of hydraulic oil filter elements is very wide, covering almost all industries: steel, electric power, metallurgy, shipbuilding, aviation, paper making, chemical industry, machine tools and construction machinery, construction machinery and other fields. Quality Standard: ISO 2941------Collapse & Burst Resistant ISO 2942------Fabrication & Integrity Test ISO 2943------Material Compatibility with Fluids ISO 3724------Flow Fatigue Characteristics ISO 3968------Pressure Drop vs. Flow Rate ISO 16889------Multi-pass Performance Testing Product Extension HQFILTRATION specializing in the production of imported high-efficiency hydraulic oil filter brands are : PALL filter element, HYDAC filter element, ARGO filter element, MAHLE filter element, FAIREY-ARLON-PARKER, INTERNORMEN, MP-FILTRI, DONALDSON, STAUFF, VICKERS , ALLISON , American Hankison series, British Domniek-hunter series, INDUFIL filter element, Ultyafiter series, Italy Hiross series, Germany Zender series, Japan SMC series, Italy BEA series, Sweden ATLAS- COPCO series, Sanling, Ivek, Detman, Perkins, Deutz, American CUMMINS , Japan YAMAHA , HONDA, IMC, Robin, MITSUBISHI , UK PERKINSROLLS-ROYCE, Bo Jones-Rolls Royce, Sweden Volvo-PENTA, China KAMA, yigtai, Demasson , Germany EATON Interton Mende Norman, DEMAG , DENISON , FuSheng , HAMM , VICKERS .
Filter Element Features: 1. Material: fiber glass;oil paper;ss mesh 2. Filtration efficiency: 99.9% 3. Filter rating: 1-25 um 4. Operating Pressure: 1.0Mpa, 2.0Mpa, 16.0Mpa, 210Mpa 5. Application field: Lubricating oil & hydraulic oil system 6. O-Ring: NBR, fluoro rubber � Filter Element Application: The hydraulic oil filter element is an indispensable part of the pipeline series of the conveying medium. It is usually installed in the inlet filter of the hydraulic system to filter out metal particles and contaminants in the fluid medium and to protect the normal operation of machinery and equipment. The application range of hydraulic oil filter elements is very wide, covering almost all industries: steel, electric power, metallurgy, shipbuilding, aviation, paper making, chemical industry, machine tools and construction machinery, construction machinery and other fields. Quality Standard: ISO 2941------Collapse & Burst Resistant ISO 2942------Fabrication & Integrity Test ISO 2943------Material Compatibility with Fluids ISO 3724------Flow Fatigue Characteristics ISO 3968------Pressure Drop vs. Flow Rate ISO 16889------Multi-pass Performance Testing Product Extension HQFILTRATION specializing in the production of imported high-efficiency hydraulic oil filter brands are : PALL filter element, HYDAC filter element, ARGO filter element, MAHLE filter element, FAIREY-ARLON-PARKER, INTERNORMEN, MP-FILTRI, DONALDSON, STAUFF, VICKERS , ALLISON , American Hankison series, British Domniek-hunter series, INDUFIL filter element, Ultyafiter series, Italy Hiross series, Germany Zender series, Japan SMC series, Italy BEA series, Sweden ATLAS- COPCO series, Sanling, Ivek, Detman, Perkins, Deutz, American CUMMINS , Japan YAMAHA , HONDA, IMC, Robin, MITSUBISHI , UK PERKINSROLLS-ROYCE, Bo Jones-Rolls Royce, Sweden Volvo-PENTA, China KAMA, yigtai, Demasson , Germany EATON Interton Mende Norman, DEMAG , DENISON , FuSheng , HAMM , VICKERS .
Product Application: Forming of complex cavities inside aluminum castings. Features: 1. Compared to ring-shaped piston salt cores, irregular-shaped salt cores, through optimized process upgrades, can produce salt core products of any shape. 2. Irregular-shaped salt cores have higher strength than ordinary piston salt cores. 3. Compared to sand cores and ceramic cores, they are easier to clean and have better surface finish. 4. Widely applicable in the forming of cavities in aluminum alloy products. (1) New salt cores applied to all lightweight castings' internal cavities. Advantages: Currently, most lightweight castings use resin sand cores to form complex internal cavities. During later cleaning, sand sticking may occur locally, making it difficult to clean the internal cavities, which is an unavoidable technical problem. The development of new salt cores can easily solve the problem of difficult sand cleaning in castings. Salt dissolves in water, and only water flushing is needed to meet the technical requirements for removing internal core sand. The use of salt cores in the piston field is already a very mature technology. The new salt core is an extension of piston salt core technology. (2) New salt cores applied to difficult-to-machine areas of injection-molded products. Advantages: For products with difficult-to-machine areas in the later stages of injection molding, new salt cores can be used to directly form the parts that need to be machined later. Place the salt core in the mold before injection molding. This eliminates the technical difficulties of difficult machining in the later stages.
COMMODITY: Grade A Chicken Paws Origin: BRAZIL-SIF plants DELIVERY: First Shipment in approximately 90 working days PACKING: Packing carton contains poly bags in a freezer carton= Approx. 20kg/per carton Total 27 MT of frozen chicken per 40 Foot container stored at -18�°C PLANT: Chicken Products will be selected from a designated plant with an acceptable SIF number. It will not be known which plant the order will originate from until an order is placed with the Slaughterhouse upon receipt of Buyers Letter of Credit (LC). PROCEDURES: 1. Buyer issues ICPO/LOI to Seller with POF 2. Seller issues FCO, and Buyer signs and returns FCO, with POF with ATV (or SWIFT TELEX bank to bank). 3. Seller signs FCO and returns it to the Buyer in PDF format. 4. Seller issues Sale and Purchase Agreement Contract within 24 hours, 5. Buyer then signs and seals the contract and returns it to the Seller, then Seller reviews the changes, if necessary, as agreed to by both parties and then Seller signs it and returns to Buyer in PDF format. 6. Within five (5) Banking days of signing SPA, Buyer's Bank issues the Operative Financial Instrument (ARLC or SBLC) from a top 25 world bank and as agreed by Seller's bank. 7. Seller, after receipt of 100% Irrevocable, (ARLC), Automatic Revolving Letter of Credit or confirmed SBLC. Performance Bond of 2%" (PB)will be issued within a reasonable time for the safety of the Buyer. (As Per instructions, terms, and conditions below. 8. Shipment Commences per Purchase and Sales Agreement 9. Against presentation of shipping documents presented to Buyer the Seller according to SIGNED SPA. Buyer shall make payment via SWIFT MT103 at loading port within 1-2 banking days after receiving shipping documents and commercial invoice per shipment. If you are interested in the above,
AIR FORCE (19") 160CC HONDA HOVER MOWER Price:$468.90 SKU:F-19 Brand:Air Force Condition:New Weight:1.00 LBS Shipping:Calculated at checkout Product Description Features Advanced Design With High Quality Materials Allows you to maximize time and effort for turf care needs Powerful 160cc Honda GCV 4-Cycle Engine Mounted in reverse to maximize oil lubrication to the engine Cup and dipper spashing system showers internal components High performance fuel pump ensures constant delivery of fuel Extra Strength Reinforcement 7-point engine mount with steel insert reinforcement Extra thick handle mounts are set low & wide for better stability 19-Inch, Injection-Molded ABS Mower Deck Coated for UV and chemical restistance Exceptionally strong yet lightweight deck enhances mower lift 14-Inch Lightweight Impeller Provides maximum lift and smoother mowing Operator Presence Control With Blade Brake Detects when operator releases their grip and cuts the engine Heavy Gauge Steel Handles 53" handle for maximum reach Padded for added comfort Not Recommended For Use On More Than A 45 Degree Angle Specifications Engine Engine Brand Honda GCV Starting System Recoil Start Engine Cycle 4-Cycle CC 160 CCs Fuel Tank Size 0.24 Gallons Engine Cylinders 1 Cylinder Oil Filter No Torque 6.9 Lbs Consumer Engine Warranty 2 Years Commercial Engine Warranty 90 Days Deck Blades 3 Blades Cutting Width 19 Inches Cutting Height .5-2.5 Inches Drive Drive System Push Overview Weight 38 Pounds Consumer Warranty 1 Year
Place of origin : Gorontalo-Indonesia Storage type : Coolstorage Specifications : Frozen Fish Shelf life : 1 Years Producer : PT. Mohutato Aily Nusantara Composition : Fresh Fish Type of preparation : Smoked Dried Fish Additives : No Freezing process : IQF Max. humidity : 10% Part : Entire Ph value : 7 Preservation process : Water Size : 10-50 cm Style : Dried, frozen Features : Organic, Vitamins, Natural, Nutritious Product name : Smoked Dried Fish Product Type : Fish MOQ : 1*20FCL Processing : Smoked Color : Light Brown Packing : Vacuum Plastic - Carton Box Packing : 10kg/pack/box Production capability : 15,000kg/month Payment Term : 50% Advance TT-50% L/C irrevocable at sigh (in the case of 100% prepayment, the price will be cheaper) PROCESS PRODUCTION : Process (fresh fish are cleaned from dirt, then the fish are sorted based on the size and weight of the fish, after that the fish are separated from the head, split in two depending by requested, then after the fish are cleaned, the fish are arranged neatly in a smoking place with a temperature of approximately 70-100�°C with time Smoking is divided into 3 sessions, namely (drying, heating and smoking sessions). The total time required for this process is 4-6 hours. After the fish has been smoked, the fish is then put into the cooling room for a duration of 2 hours, then the fish is placed under to the packaging place and put into coldstorage with temperature (18C). This is done to maintain the durability of the smoked fish.
truSculpt iD provides an innovative RF technology that delivers clinically proven results to expand your body sculpting business. The system versatility allows for customized treatments to treat the abdomen and flanks simultaneously based on patients need in as little as one 15-minute treatment protocol. TruSculpt ID by Cutera is an innovative fat-reducing technology that helps individuals achieve their desired body shape. By using cutting edge advanced radiofrequency energy ID eliminates fat cells in different targeted areas of the body simultaneously. The abdomen, thighs, flanks, and arms can all be treated in one single treatment. Afterwards stubborn pockets of fat should be removed and your body should have a more contoured and toned appearance. TruSculpt iD is the latest body sculpting technology giving you a personalized, hands-free and hand-held solution to revolutionize your practice. This powerful, non-invasive, Monopolar RF platform tailors to patients individual needs and features Real-Time Temperature Control for clinically proven results, safety, and patient experience. truSculpt�® iD treats the entire fat layer, resulting in a 24% fat thickness reduction. It offers unique handpiece and placement location versatility and customized 15-minute protocols to treat a full abdomen or multiple body areas simultaneously. Average 24% fat reduction Clinically proven results for permanent fat cell destruction Real-Time Temperature Control for consistent results Fast 15-minute treatment protocols Hands-free & hand-held flexibility Enhanced safety High patient satisfaction Multiple body areas treated simultaneously Patient & treatment versatility Customized treatment protocols 2020 Cutera Trusculpt iD Monopolar RF Body Contouring; Pristine Cosmetic and Operating Condition, Lightly Used for a Total of 3 Treatments Only, Single Owner; Reason For Selling: Downsizing; Also Includes: (6) 40cm2 HFree Handpiece (Hands-Free Handpiece, for Abdomen & Flanks), (1) 40cm2 HHeld (Hand-Held Handpiece, for Personalized Body Treatment), (1) 16cm2 Handpiece (Hand-Held Handpiece, for Personalized Face Treatment), (2) Keys, Operators Manual.
