Product Application:
Forming of complex cavities inside aluminum castings.
Features:
1. Compared to ring-shaped piston salt cores, irregular-shaped salt cores, through optimized process upgrades,
can produce salt core products of any shape.
2. Irregular-shaped salt cores have higher strength than ordinary piston salt cores.
3. Compared to sand cores and ceramic cores, they are easier to clean and have better surface finish.
4. Widely applicable in the forming of cavities in aluminum alloy products.
(1) New salt cores applied to all lightweight castings' internal cavities.
Advantages: Currently, most lightweight castings use resin sand cores to form complex internal cavities. During
later cleaning, sand sticking may occur locally, making it difficult to clean the internal cavities, which is an
unavoidable technical problem. The development of new salt cores can easily solve the problem of difficult sand
cleaning in castings. Salt dissolves in water, and only water flushing is needed to meet the technical requirements
for removing internal core sand. The use of salt cores in the piston field is already a very mature technology.
The new salt core is an extension of piston salt core technology.
(2) New salt cores applied to difficult-to-machine areas of injection-molded products.
Advantages: For products with difficult-to-machine areas in the later stages of injection molding, new salt cores
can be used to directly form the parts that need to be machined later. Place the salt core in the mold before
injection molding. This eliminates the technical difficulties of difficult machining in the later stages.
Pularin: Foot ball shaped 60 atoms of carbon at edges is layed in pularin.Pularin atoms are arranged in ball. Each atom is called Bucky balls and tubes are called Bucky tubes or Nano tubes.Each nano tube is 1 to 7 nm diameter i.e 1nm=50000 part of a hair sting. where? 1)mangampet ,cuddapah dist.Ap,India.app 800 ppm(parts prer million)info given by stanford University. Cost: 150 times costlier than gold. 10 grams pularin $23000 to $45000 also info given by Bucky-USA website. Special uses if this becomes common: 1)Pularin coting on aeroplanes withstands from thunders ,rains ,Flashes etc. 2)Bullet proof ackets 3)curing cancer etc.
Nickel is a hard, ductile and ferromagnetic metal that is highly polished and resistant to corrosion. Nickel is a ferrophilic element. The core is mainly composed of iron and nickel elements. In the crust, iron-mafic rocks contain more nickel than silico-alumina rocks. For example, peridotite contains 1,000 times more nickel than granite, and gabbro contains 80 times more nickel than granite. On October 27, 2017, the World Health Organization's International Agency for Research on Cancer released the preliminary list of carcinogens for reference. Nickel compounds are in the list of carcinogens, metal cobalt, metal nickel and 66-67% nickel, 13-16% nickel. Chromium and 7% iron alloy powders for implantation of foreign bodies in vivo, nickel metal and nickel alloys are on the list of Class 2B carcinogens. Niclkel powder is mainly used in atomic energy industry, conductive materials, battery electrode materials, chemical catalysts, hard surface spray welding, special welding rods, porous filter materials, magnetic materials, contact materials, Diamond tools, automobile manufacturing, cemented carbide, high-temperature high-strength alloys and other powder metallurgy fields.
Chemical Composition: Al Weight: 20/25kg Al (Min): 99.7%-99.9% Place of Origin: UK Appearance: silvery white Aluminum ingot for remelting is produced by molten salt electrolysis method using alumina and cryolite. Products meet the national standard GB/T1196-2002. The surface of ingot is clean and smooth. Grade Chemical Composition % Impurities Si Fe Cu Ga Mg Zn Mn Others Sum Al99.9 0.50 0.07 0.005 0.02 0.01 0.025 -- 0.010 0.10 Al99.85 0.80 0.12 0.005 0.03 0.02 0.030 -- 0.015 0.15 Al99.7 0.10 0.20 0.010 0.03 0.02 0.030 -- 0.030 0.30 Al99.6 0.16 0.25 0.010 0.03 0.03 0.030 -- 0.030 0.40 Al99.5 0.22 0.30 0.020 0.03 0.05 0.050 -- 0.030 0.50 Al99.00 0.42 0.50 0.020 0.03 0.05 0.050 -- 0.050 1.00 25 kg specification: Product Name: Aluminum ingot for remelting (AL99.70) Dimensions: about 823*183*110 mm Weight: about 25 kg Bale weight: about 1050kg Each delivery unit (25 tons) : 23 bales Packing material: 0.9 x 32 mm steel strip, surface treated with anti-rust. "#" shape binding, binding firm. Execution standard: GB/T1196-2008 standard in the AL99.70 provisions The main models are as follows: AL99.90, AL99.85, AL99.70A, AL99.70, AL99.60, AL99.50, AL99.00.
Product Name Carbon Steel Wire Rods Material Q195, Q235, Q345; ASTM A53 GrA,GrB; STKM11,ST37,ST52, 16Mn,etc. Diameter 0.1MM~12MM Length in coils 5m-14m,5.8m,6m,10m-12m,12m or as customer's actual reques Standard JIS G3466, EN 10219, GB/T 3094-2000, GB/T 6728-2002 Section Shape Round Technique Hot rolled Packing Bundle, or with all kinds of colors PVC or as your requirements Surface Treatment 1. Galvanized 2. Transparent oil,anti-rust oil 3. According to clients requirement Ends Plain end MOQ 1 Tons, more quantity price will be lower Product Application 1. Fence, greenhouse, door pipe,greenhouse 2. Low pressure liquid, water, gas, oil, line pipe 3. For both indoor and outdoor the building construction 4. Widely used in scaffolding construction which is much cheaper and convenient Wire rods are mainly used as blanks for wire drawing, and can also be directly used as building materials and processed into mechanical parts. Wire rod, also known as wire rod, usually refers to small diameter round steel in coils. The diameter of the wire rod is in the range of 5-19 mm (usually 6-9 mm), and its lower limit is the minimum size of the hot rolled steel section. Wire rods are round steel with relatively small diameter. The commodity form is supplied in coils. On the construction site, the common ones are those with diameters of 6, 8, 10 and 12 mm, most of which are low carbon steel. Generally, they are not used for the main reinforcement of reinforced concrete structures, but are mainly used for making reinforcement sleeves. There are also small diameter "brick reinforcement" used in brick concrete structures. Warehouse Storage Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project Packing and shipping Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service. During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period
Product Name Carbon Steel Wire Rods Material Q195, Q235, Q345; ASTM A53 GrA,GrB; STKM11,ST37,ST52, 16Mn,etc. Diameter 0.1MM~12MM Length in coils 5m-14m,5.8m,6m,10m-12m,12m or as customer's actual reques Standard JIS G3466, EN 10219, GB/T 3094-2000, GB/T 6728-2002 Section Shape Round Technique Hot rolled Packing Bundle, or with all kinds of colors PVC or as your requirements Surface Treatment 1. Galvanized 2. Transparent oil,anti-rust oil 3. According to clients requirement Ends Plain end MOQ 1 Tons, more quantity price will be lower Product Application 1. Fence, greenhouse, door pipe,greenhouse 2. Low pressure liquid, water, gas, oil, line pipe 3. For both indoor and outdoor the building construction 4. Widely used in scaffolding construction which is much cheaper and convenient Wire rods are mainly used as blanks for wire drawing, and can also be directly used as building materials and processed into mechanical parts. Wire rod, also known as wire rod, usually refers to small diameter round steel in coils. The diameter of the wire rod is in the range of 5-19 mm (usually 6-9 mm), and its lower limit is the minimum size of the hot rolled steel section. Wire rods are round steel with relatively small diameter. The commodity form is supplied in coils. On the construction site, the common ones are those with diameters of 6, 8, 10 and 12 mm, most of which are low carbon steel. Generally, they are not used for the main reinforcement of reinforced concrete structures, but are mainly used for making reinforcement sleeves. There are also small diameter "brick reinforcement" used in brick concrete structures. Warehouse Storage Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
Product Name : Carbon Steel Wire Rods Material : Q195, Q235, Q345; ASTM A53 GrA,GrB; STKM11,ST37,ST52, 16Mn,etc. Wall Thickness : 0.1MM~12MM Length : in coils 5m-14m,5.8m,6m,10m-12m,12m or as customer's actual reques Standard : JIS G3466, EN 10219, GB/T 3094-2000, GB/T 6728-2002 Section Shape : Round Technique : Hot rolled Packing : Bundle, or with all kinds of colors PVC or as your requirements Surface Treatment 1. Galvanized 2. PVC,Black and color painting 3. Transparent oil,anti-rust oil 4. According to clients requirement Ends : Plain end MOQ : 1 Tons, more quantity price will be lower Product Application 1. Fence, greenhouse, door pipe,greenhouse 2. Low pressure liquid, water, gas, oil, line pipe 3. For both indoor and outdoor the building construction 4. Widely used in scaffolding construction which is much cheaper and convenient * Wire rods are mainly used as blanks for wire drawing, and can also be directly used as building materials and processed into mechanical parts. * Wire rod, also known as wire rod, usually refers to small diameter round steel in coils. The diameter of the wire rod is in the range of 5-19 mm (usually 6-9 mm), and its lower limit is the minimum size of the hot rolled steel section. * Wire rods are round steel with relatively small diameter. The commodity form is supplied in coils. On the construction site, the common ones are those with diameters of 6, 8, 10 and 12 mm, most of which are low carbon steel. Generally, they are not used for the main reinforcement of reinforced concrete structures, but are mainly used for making reinforcement sleeves. There are also small diameter "brick reinforcement" used in brick concrete structures. Warehouse Storage * Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project Packing and shipping * Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service. * During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period
HBI is the preferred DRI product for the merchant metallic market; Because it is much denser than CDRI, which reduces the re-oxidation rate. In fact this enables HBI to be stored and transported without special precautions under the International Maritime Organization (IMO) code for shipping solid bulk cargoes. Besides we can use it the EAF, BF, and BOF. Consequently, HBI which is the product of compressing DRI discharged from the MIDRE Shaft Furnace at 650 C into pillow-shaped briquettes; with a typical size of 30 x 50 x 110 mm and a density 5 gm/cc. No binder is used to make HBI.
* In the field of constructions, steel acts as a powerful structure, which creates a high strength, durability and stability. Steel is an alloy of iron and carbon and sometimes other elements. It is a low cost and a significant component used in buildings, infrastructures, tools, machines, appliances, etc. * Steel being the most preferred choice for construction has great benefits. The buildings are made up of different types of steel, which forms a structural framing system, saves time and less expensive * Steel reinforcement bars or rebars are used to improve the tensile strength of the concrete. * Steel is only used as rebar because elongation of steel due to high temperatures (thermal expansion coefficient) nearly equals to that of concrete Types of Steel Reinforcement Bars * Major types of steel bars used in the construction I.Mild Steel Bar * The surface of the mild steel bars are plain and round in shape. They are available in various sizes of 6 mm to 50 mm. They are used in concrete for special purposes, such as dowels at expansion joints, where bars must slide in a metal or paper sleeve, for contraction joints in roads and runways, and for column spirals. They are easy to cut and bend without damage. Grades in mild steel bars 1. Mild Steel Bars Mild steel bars grade-I designated as Fe 410-S or Grade 60. Mild steel bars grade-II designated as Fe-410-o or Grade 40. 2. Medium Tensile Steel Bars designated as Fe- 540-w-ht or Grade 75. II.Deformed Steel Bar Deformed steel bars have ribs, lugs and indentation on the surface of the bar, which reduces the major problem that is faced by mild steel bar due to slippage and good bonding is achieved between concrete and rebar. The tensile properties is higher compared to other rebars. These bars are produced in sections from 6 mm to 50 mm dia. 1. TMT Bars (Thermo Mechanically Treated Bars) Thermo Mechanically Treated Bars are hot treated bars that are high in strength used in reinforced cement concrete (RCC) work. It is the latest induction in the MS steel bars with superior properties such as strength, ductility, welding ability, bending ability and highest quality standards at international level. Characteristics of TMT Rebars Better ductility and malleability High yield strength and toughness More bonding strength Earthquake resistance Corrosion resistance High thermal resistance Economical and safe in use No loss in strength at welded joints Ordinary electrodes used for welding the joints 2. High Strength Deformed Bars High strength deformed bars are cold twisted steel bars with lugs, ribs, projection or deformation on the surface. It the extensively and majorly used for reinforcement purposes in a construction. These bars are produced in sizes or sections from 4 mm to 50 mm in diameter.
Supplier: Our company mainly deals in metal stamping parts, precision parts of automatic lathes, screws, springs, finished products of special shaped wires, etc
