Auto level foif 24x +tripod+leveling staff 5m with warranty 5 years And calibration certificate only 250 usd Also we have all surveying instrument(auto level-thedolite-total stahion-laser level-distance mater) Now, with confidence announce the possibility of delivery all types of our products to all over the world during the period of not more than one week only.
This is multi zone Indirect fired biscuit Oven suitable for general purpose biscuit baking.This Oven is divided into several independent heating zones along the Chamber.Each zone includes compulsory hot wind circulation system comprising a Combustion Chamber with Burner, Circulating fan, Turbulence fan, and the associated Duct work leading the banks of Radiator tubes.The oven identified by Technology Council, specialists consistently cognizance that is has reached the International level. It can meet the technological requirements for production of different biscuits. The machine is heated with gas (LPG or natural gas) or Oil (Diesel / Furnace Oil) Fired imported Burners which gives rapid heating up, high efficiency and energy saving . The oven is divided into independent heat control zones whose number depends upon the overall length of the oven. The top and bottom temperature of each zone can be preset and adjusted to reach heating demand of baking different biscuit.The colour, scent and taste of biscuits is overall improved to a higher grade. Standard wooden packing as per export.
The Rotary Rack Oven is equipped with a two way steamer that enables abundant steam..Also thicker materials have been used in this machine to maintain the absorbed heat and reduce at least 40% of burner ignition and consumption. The burner has to be selected according to the fuel that is used LPG / Diesel. Salient features: * Lower fuel consumption * Uniform colour * Consistent Baking. * Easy to operate * Completely built with stainless steel Firing Chamber: The complete Firing chamber will be insulated with mineral wool filled from out side to conserve heat and increase efficiency. The firing chambers Shell fabricated out of stainless steel. The Oven can maintain temperature up to 315° and temperature rises from room temperature to 225° in just 25 minutes. Heat Circulation:The hot air is distributed evenly into the Oven by a blower fan and oven's rotary movements provide even & uniform baking at all levels of the rack. Oven has an indirect diesel fired heating system so that burnt gases do not come in contact with the baking products. The fully automatic imported burner will be fitted to the chamber and the temperature controlled by automatic temperature controller, fitted on the control panel. Door:A full stainless steel door provides with heat resistance silicone gasket that sealed the door and gains heat of the oven. Insulation:The complete oven will be covered with mineral wool insulation and Mild steel or Stainless steel covers to avoid heat loss. Construction:The oven body consists of mild steel. The structure of oven is stand on angle frame and the all side of oven will be covered with Mild steel or Stainless steel sheets. Inspection:The Stainless Steel doors are provided with Toughened glass and interior light for the inspection during the process. Rack:The baking product is to be put in trays, which are placed in the rack, which rotates at a low RPM through a system of gearbox and motor, located at the top of the Oven Electrical:Three Phase Electricity required for running the system. Electrical controls indicators and starters will be fitted on the control panel. Fan:The circulating fan will be well balanced to avoid vibration and will give noise free operation in high speeds. Temperature Control: A digital indicating controller maintains temperature in the Oven, which comes with safety thermostat and a timer along with a hooter that helps in baking cycle. Standard Wooden packing as per order
The Rotary Rack Oven is equipped with a two way steamer that enables abundant steam..Also thicker materials have been used in this machine to maintain the absorbed heat and reduce at least 40% of burner ignition and consumption. The burner has to be selected according to the fuel that is used LPG / Diesel. Salient features: * Lower fuel consumption * Uniform colour * Consistent Baking. * Easy to operate * Completely built with stainless steel Firing Chamber: The complete Firing chamber will be insulated with mineral wool filled from out side to conserve heat and increase efficiency. The firing chambers Shell fabricated out of stainless steel. The Oven can maintain temperature up to 315° and temperature rises from room temperature to 225° in just 25 minutes. Heat Circulation:The hot air is distributed evenly into the Oven by a blower fan and oven's rotary movements provide even & uniform baking at all levels of the rack. Oven has an indirect diesel fired heating system so that burnt gases do not come in contact with the baking products. The fully automatic imported burner will be fitted to the chamber and the temperature controlled by automatic temperature controller, fitted on the control panel. Door:A full stainless steel door provides with heat resistance silicone gasket that sealed the door and gains heat of the oven. Insulation:The complete oven will be covered with mineral wool insulation and Mild steel or Stainless steel covers to avoid heat loss. Construction:The oven body consists of mild steel. The structure of oven is stand on angle frame and the all side of oven will be covered with Mild steel or Stainless steel sheets. Inspection:The Stainless Steel doors are provided with Toughened glass and interior light for the inspection during the process. Rack:The baking product is to be put in trays, which are placed in the rack, which rotates at a low RPM through a system of gearbox and motor, located at the top of the Oven Electrical:Three Phase Electricity required for running the system. Electrical controls indicators and starters will be fitted on the control panel. Fan:The circulating fan will be well balanced to avoid vibration and will give noise free operation in high speeds. Temperature Control: A digital indicating controller maintains temperature in the Oven, which comes with safety thermostat and a timer along with a hooter that helps in baking cycle. Standard wooden Packing as per Export.
Features: • Calculiclast is most effective equipment for urinary stone fragmentation of any size. • It can fragment renal, bladder or ureter stones with the help of different probes. • It has adjustable power of the blast. • Four different preset frequencies for different applications. • Its handtool is light-weight & easy to assemble. • The complete unit is portable & comes in specially designed PVC molded bag. 1 Bag consisting of • Control Unit • Hand pieces : 2 Nos. • Silicon Rubber Tubing • Footswitch • Oxygen Gas Regulator • PU-6 Tubing • Probes-0.8 mm, 1 mm, 1.2 mm each for ureteric stones, 1.5 mm, 2 mm each for bladder & renal stones. • One PVC molded bag with foam lining inside to accommodate all the parts of Calculiclast.
This flat bed sewing machine is special designed for stitching extra heavy materials with thick thread. Excellent stitch pattern and uniformly tight stitch formation, due to its heavy, extremely sturdy design and highly refined parts. The machine has triple feeding system, stitch length up to 12 mm, with oversized barrel shuttle hook, suitable for sewing webbings, cargo slings, cargo lashing, nylon, tents, awnings, boat sails, safety belts, protective clothing, equestrian clothing, saddles, general leather goods, upholstery and technical textiles. 0.256 cb.M, 81 kgs
This machine is double needle, four thread safety-stitch machine with a sewing capacity up to 22mm and an over-edging seam of up to 15mm, interchangeable with union special 81300a. It is the practical solution of container bag (fibc) /jumbo bags, bulk bags manufacturers, for producing side and bottom seams on very heavy weight jute, burlap and woven polypropylene bags. 7-81300a1h equipped with a pneumatically operated presser foot and upper feed dog lifter and also a pneumatic presser foot spring. 0.185 cb.M, 52 kgs
Cam controlled extra heavy duty long arm zigzag machine with large barrel shuttle hook and reverse. Standard supplied with puller for strong and steady feeding, 3 different cams, suitable for straight stitch, 2 step, 3 step and 4 step zigzag, pneumatic presser foot lift and pneumatic back tack, needle cooler and hook cooler. The extra long arm clearance of 785mm is very useful when sewing larger items. A high foot lifter up to 20mmallows for heavy & bulky materials, such as sail, tent & marquees and tarpaulins. This is the improved version of durkopp adler 366-76-12-hm. 0.524 cb.M, 185 kgs
The sewing machine is designed for sewing heavy materials with thick thread, such as leather, vinyl, upholstery, synthetics, canvas and various coated and laminated. For stitching such products as auto, boat and furniture upholstery, tarpaulins, covers, sails, tents, camping trailer covers, awnings, umbrellas, canopies, bulk container bags, luggage, jumbo bags, backpacks, travel ware accessories, sports and camping equipment, outdoor clothing, canvas shoes, slippers and others. Currently in china this model is the most popular machine for professional manufacturers of container bags/ bulk bags. 0.225 cb.M, 85 kgs
It is fitted with an extra large shuttle hook assembly (204 type) for use with heavy weight & extra heavy weight materials and threads. Ideal for stitching on medium-heavy to extra heavy leathers such as saddles, harness, heavy and light tack, chaps, technical textiles, filters, chinks, safety belts, cases and bags. Manufactures are currently using this model for sewing a decorative stitch on highly decorative fashion denim jeans. 7441 ae standard supplied with full array of special attachments for saddle maker and harness makers, include speed reducer, material guide, table top attachment, left/right side presser foot, double-toes harness makerí»s foot, flat needle plate, holster plate and stirrup plate. 0.195 cb.M, 63kgs
Oil filter As per customers requirement.
Foot Operated , Power 220 v / 90 watt. Autoclavable
Rail limb lengther 400 mm, 300 mm Central clamp, end clamp, suvel clamp, ball and scocket clamp, central distance unit
Hand operated, autoclavable, useful for bone grafting.
Made in turkey, stainless steel body, single deck, 50x50 cm chamber, 4 kw, 220/400V,3F+N 800x720x390 mm , 56 kg
Micro computer controled certified by FIBA,furnished with high-strengh safety glass backboard(24-second electronic timer exclusive)
Compactor Weight84kg Pressing panel size440x550mm Speed25m/min Engine5.5 hondahp Height680/ 980mm(engine)/mm(handle) Length545mm Width415mm Optionno wheelno water pail Weight84kg Pressing panel size440x550mm
Portable rebar cutter Modelcapacityelectric Powerelectric Pressuresize(mm)weight Lwh Kmc-25hsoft : 25 mm Hard : 19mm1.9 kw220v, 60hz 52014625023 kg Kmc-25w25 mm1.5 kw220v, 60hz 722530637120 kg
Output wavelength: blue light: 465, 1nm Output energy: 120mw Output power: 70w~100w Repetition rate: continuous or 10hz pulse The size of facula: 30 90m¬o Operation interface: tangibly color liquid crystal display Electrical source: 90 v - 250v50/60hz 69*69*21cm
Extracting forceps Extracting forceps are about 200 types using all dentist world wide.We can provide all types of forceps in any quantit. 1000 pcs
