TPV waterstop, also known as TPER waterstop, made of an alloy of rubber and plastic, acts as a fluid-tight diaphragm with excellent mechanical properties and higher chemical resistance than traditional waterstops. Without plasticizer, stabilizer or fillers, the TPV waterstops will not leech out when exposed to chemical fluids as hydrophilic waterstops. HDPE Waterstop is used as a fluid-tight diaphragm, embedded in concrete, across and along the joint, for primary and secondary containment structures. Chemical Resistant Waterstops are ideally suited for fuel, oil, and other hydrocarbon Features & benefits Quality recycled thermoplastic elastomeric rubber materials - healthy and environmental friendly. Excellent resistance against chemical, ozone, oils, solvents, hydrocarbon and aggressive industrial liquids, etc. Not susceptible to ketones, esters, glycols, alcohol, and water solution of acids, salts and bases, etc. High resistance to long term temperature changing ranging from -78°F to 275°F. High elasticity. Superior weather and UV resistance Easy to butt-weld. low tension and compression set. Excellent dynamic fatigue resistance. Installation: Normally, the TPV waterstops are embedded into or installed along extend of joints for preventing water and chemical liquid leaking into the joints, which is the weak point in any concrete structure. As to the changes of directions, pre-fabricated products are needed for easy installation. Application: Ideal for primary and secondary containment structures. Sewage treatment facilities. Fueling containing areas. Mining and refineries industries. Structures relating to ozone. Manure pits and elevator pits. Retaining walls and dams. Storage tanks and other water reservoirs. Canals and tunnels. Roof and floor slabs, parking decks and bridge decks.
Specifications of Goods: Item: low sugar instant dry yeast Application: Used for fermenting all kinds of paste, such as bread, pastry, and cakes. Ingredients: Natural Yeast, Emulsifier Usage: low sugar instant dry yeast is suitable for making sugar-free and low sugar bread. (No sugar, or less than 7% sugar) Dosage: 0.3~0.5% of the flourâ??s use amount Storage: Stored in cool and dry place. Shelf Life: 24 months from the date of production How to Use 1. Mixing the yeast low sugar into flour, add water, and stir well. Or, knead with the paste as dough for fermenting. 2. Control the water temperature and the fermenting temperature at 35~38â??. 3. Avoid directly adding the yeast into oil or cold water. Packaging: Inner Packing: Individual units vacuum packed in poly-laminate foil sachets. Heat sealed. Outer Packing: Seaworthy Master Cartons Delivery Time: 40~50 days after confirming the order. Brands: Our own brands: A-One, Prosper, Baker Choice, Yeastrue, APULS, Best Hope. OEM order is available. MOQ: 1x20â??ft container Payment Term: 1. 30% T/T down payment; 70% T/T balance payment against B/L copy. 2. Irrevocable confirmed L/C at sight. Why Chose Us: 1. Experienced production and QC team to ensure the quality. 2. Passionate marketing team to help you find the best product solution. 3. Professional export team to help you operate the order, and solve problem. About Xinghe Yeast: China Dalian Xinghe Yeast Co., Ltd (www.xingheyeast.com) is a China leading yeast manufacturer that locates in the city of Dalian. We can produce low sugar instant dry yeast, high sugar instant dry yeast, feed yeast, etc. With the development of 20 years, our product are widely sold to domestic market and 100 countries and areas in the world, get good reputation.
Specifications of Goods: Item: instant dry yeast for baking bread Application: Used for fermenting all kinds of paste, such as bread, pastry, and cakes. Ingredients: Natural Yeast, Emulsifier Usage: low sugar instant dry yeast is suitable for making sugar-free and low sugar bread. (No sugar, or less than 7% sugar) Dosage: 0.3~0.5% of the flours use amount Storage: Stored in cool and dry place. Shelf Life: 24 months from the date of production How to Use: 1. Mixing the yeast low sugar into flour, add water, and stir well. Or, knead with the paste as dough for fermenting. 2. Control the water temperature and the fermenting temperature at 35~38 3. Avoid directly adding the yeast into oil or cold water. Packaging: Inner Packing: Individual units vacuum packed in poly-laminate foil sachets. Heat sealed. Outer Packing: Seaworthy Master Cartons Delivery Time: 40~50 days after confirming the order. Brands: Our own brands: A-One, Prosper, Baker Choice, Yeastrue, APULS, Best Hope. OEM order is available. MOQ: 1x20ft container Payment Term: 1. 30% T/T down payment; 70% T/T balance payment against B/L copy. 2. Irrevocable confirmed L/C at sight. Why Chose Us: 1. Experienced production and QC team to ensure the quality. 2. Passionate marketing team to help you find the best product solution. 3. Professional export team to help you operate the order, and solve problem. About Xinghe Yeast: China Dalian Xinghe Yeast Co., Ltd is a China leading yeast manufacturer that locates in the city of Dalian. We can produce low sugar instant dry yeast, high sugar instant dry yeast, feed yeast, etc. With the development of 20 years, our product are widely sold to domestic market and 100 countries and areas in the world, get good reputation.
1.Product description Advantages: 1. Light in weight            2. Heat-insulation, good sound insulation 3. Good durability, 4. High quality in Fireproof        5. Easy installation   Rock wool sandwich panel Effective width Wall-950mm/1000mm Roof-950mm/980mm Length According to customer request(Max length:11.8meters) Structure Upper and lower layer: color coated steel sheet Core: Rock wool board Thickness Color coated steel sheet: 0.14 - 0.6mm            Rock wool thickness: 50 - 150mm Color RAL Standard Advantages Light in weight, hear insulation, water resisting, green and environmental Characteristics For wall of large size factory buildings, storages, exhibition halls, gymnasiums etc. sandwich panel 2.Quality: Before production ,all material must be inspected and confirmed by QA&QC department and ISO system,It can be arranged production in accordance . 3.Guarantee : When production , Reasonable design, Professional technicians, Stable production workers, Full-scale Equipments, Strict QA & QC system � 4.Design: supply free design drawing according to customer practical situation. 5.Engineer Support: 1.Installation Guidence video we supply our diagrammatic drawing Installation instruction and video, Easier for installation 2.Turn-key project There are more than 100 professional engineers who can go aboard to supply technology support and direction and give turn key project for  customers. 6.International Trade Operation: Now we have customers in different countries and places, such as Canada, USA, Australia, New Zealand, Singapore, Argentina, Middle- East, Africa� Cold storage,clean room ,medical cure centre,food storage,freezer room ,cooler room etc.
Technical Parameters Product name: PFA reagent bottle Specifications (ml): 30/60/100/125/250/500/1000/2000/3000/4000/5000 Material: PFA Withstand temperature: -196-260 Celsius degree Product Features 1. Translucent appearance; 2. Temperature resistance: operating temperature -200~+260â??; 3. Insulation resistance: dielectric properties have nothing to do with temperature and frequency; 4. Anti-pollution: low metal element value; 5. It has low dissolution and precipitation characteristics and is a container for storing standard substances and different reagents; use: 1. Suitable for storing and packaging different chemical reagents and standard samples; 2. Applicable to semiconductor, polysilicon, photovoltaic electronic lithium battery industries; sampling of high-purity water, electronic pure reagents, photoresist, silicon wafer washing liquid, electronic grade cleaning agent, liquid crystal liquid, circuit board washing liquid, etc.; also suitable for new materials and new Storage and use of energy such as silicon materials; 3. Can be used with Agilent, Shimadzu, PE, Thermo Fisher and other brands of ICP-MS, ICP-OES and other instruments for trace analysis and isotope analysis. Our PFA series products: Sample storage bottles, washing bottles, volumetric flasks, measuring cups, beakers, digestion tubes, sample dissolving tanks, micro columns, crucibles, valves, joints, delivery pipes and other products
Kendall is a supplier of air-cooled two-stage piston condensing units. These units are designed to provide reliable and efficient cooling for a variety of applications, including commercial refrigeration, HVAC systems, and industrial processes. Air-cooled two-stage piston condensing units are highly efficient and reliable refrigeration systems used in a variety of applications. The cost of these units can vary depending on several factors, but they offer significant advantages over other types of refrigeration systems. FAQs 1. What is an air-cooled two-stage piston condensing unit? An air-cooled two-stage piston condensing unit is a refrigeration system that uses two compression stages for improved efficiency and cooling capacity. It features air-cooled condensers and piston compressors, ideal for low-temperature applications like freezing and industrial refrigeration. 2. What are the advantages of using an air-cooled two-stage piston condensing unit? Advantages of using an air-cooled two-stage piston condensing unit include higher energy efficiency, enhanced cooling capacity, and reliable performance in low-temperature applications. These units offer better temperature control, and reduced energy consumption, and are suitable for industrial and commercial refrigeration needs. They are highly efficient and reliable, with lower operating costs and longer service life. They also require less maintenance and are easier to install than water-cooled systems. 3. What applications are air-cooled two-stage piston condensing units used for? Air-cooled two-stage piston condensing units are used in applications such as industrial refrigeration, cold storage, food processing, and low-temperature freezing. They are ideal for environments requiring precise temperature control and efficient cooling, such as supermarkets, warehouses, and pharmaceutical storage facilities. 4. How much do air-cooled two-stage piston condensing units cost? The cost of an air-cooled two-stage piston condensing unit can vary depending on several factors, such as the size of the unit, the brand, and the features. Generally, these units range in price from a few thousand dollars to tens of thousands of dollars.
Intelligent Solar Inverter Since the Senergy Power Optimiser handles maximum power point tracking and voltage management separately for each solar module, the intelligent solar inverter is only responsible for the DC to AC inversion. It is therefore a simpler, more cost-efficient and more reliable solar inverter. The fixed string voltage ensures that operation is always at maximum efficiency, independent of string length and temperature. In addition to its function as a DC-optimised PV inverter, the intelligent solar inverter also manages the battery and system energy as part of the Senergy home solution. Versatile and intelligent hybrid inverter for continuous power supply using solar, AC and battery power. This is a simple and intelligent solar inverter with an energy storage system for homeowners who want to store energy in batteries for night-time use or for their own use on demand. It will automatically consume the reserved power from the batteries at night or during power outages. This hybrid PV system will reduce dependence on the utility. Smart Energy Home Intelligent solar invertercan already monitor and manage solar energy production and are perfect for managing energy storage and energy use. Inverters can store solar energy in batteries for use at night, use excess PV energy to heat water, or activate other smart devices during the day to help reduce electricity bills. By managing energy holistically, the PV inverter transforms the smart home into a smart energy home and puts power in the hands of consumers.
Technical Parameters Product name: PFA reagent bottle Specifications (ml): 30/60/100/250/500/1000/2000/3000/4000/5000 Material: PFA Withstand temperature: -196-260â?? Product Features 1. Translucent appearance; 2. Temperature resistance: operating temperature -200~+260â??; 3. Insulation resistance: dielectric properties have nothing to do with temperature and frequency; 4. Anti-pollution: low metal element value; 5. It has low dissolution and precipitation characteristics and is a container for storing standard substances and different reagents; use: 1. Suitable for storing and packaging different chemical reagents and standard samples; 2. Applicable to semiconductor, polysilicon, photovoltaic electronic lithium battery industries; sampling of high-purity water, electronic pure reagents, photoresist, silicon wafer washing liquid, electronic grade cleaning agent, liquid crystal liquid, circuit board washing liquid, etc.; also suitable for new materials and new Storage and use of energy such as silicon materials; 3. Can be used with Agilent, Shimadzu, PE, Thermo Fisher and other brands of ICP-MS, ICP-OES and other instruments for trace analysis and isotope analysis. Our PFA series products: Sample storage bottles, washing bottles, volumetric flasks, measuring cups, beakers, digestion tubes, sample dissolving tanks, micro columns, crucibles, valves, joints, delivery pipes and other products
Product information Product name:Tonex white SWN Color Index No: C.I.140 Synonyms: FBA 140; OBA 140,Fluorescent Brightener SWN; Optical Brightener Agent MDAC, Optical Brightener MDAC Molecular Structure: Molecular Formula : C14H17NO2 Molecular Weight: 231.28 CAS No 91-44-1/61968-71-6 C.I. No.: C.I.140 Appearance off white powder Melting point :70.5-73 Assay: 98% Fineness 200 meshes Features: 1.Multipurpose brightener with excellent whiteness, soluble in ethanol but insoluble in water. 2.having properties of good solubility and compatibility. Applications This product is mainly used for whitening of wool,natural silk, nylon, acetate fiber and triacetate fiber. It can also be usedfor whitening of cotton and cyanamide, and can be used for whitening ofcellulose fiber by adding resin. Reference dosage: The dosage is: nylon 0.05-0.3%, wool 0.05%-0.35%,acetate fiber 0.05-1.4%, triacetate fiber 0.1-2%, cylandex 0.05%-0.8%. In addition, this product can be added to soap and detergent for washingfabrics, effective in the PH=3-11 range, can improve the appearance of thefabric after washing. It can also be used for coated paper, plastic andchromatic printing coatings. Package & Storage: 25kg fiber drumor for the special demand . Should be storedin cool, dry and ventilate place, and storage time should not exceed 24 months
Chemical Name: 2-Mercaptomethylbenzimidazole Specification: Item Powder Oiled powder Appearance(eye measurement) Light yellow or off-white crystalline powder Incipient melting point oC â?¥ 250.0 â?¥ 250.0 Heating loss % â?¤0.40 â?¤0.40 Ash content % â?¤0.40 â?¤0.40 Residue on sieve( 150�¼m),% â?¤ 0.0 â?¤ 0.0 Additive,% -- 1.0-2.0 Properties: Gray-white powder. No amell but taste bitter. The density is 1.33. Soluble in alcohol, acetone, ethyl acetate, slightly soluble in petroleu, ether, CH2CL2, insoluble in CCL4, benzene and water. Good atabilization storge ability. As second anti-degradant without poison. Application: This product can be used for natural and synthetic rubbers. As it is secondary antioxidant, ever better effects can be developed when used together with other antioxidants. Furthermore, when it is employed in casw of sulfurless vulcanization higher heat resistance can be obtained, it also severs as an accelerator of CR and heat sensitizing agent for latices. It is effective not only white and light colored articles, but also for rubber products of all types. But unsuitablefor food processing. Packaging: 25kg; plastic woven bag, paper with plastic film bag, kraft paper bag . Storage: Keep container tightly closed in a cool, well-ventilated place. The recommended maximum storage life is 2 year when stored under normal conditions .
Chemical Name: Tetraethyl thiuram disulfide Specification: Item Crystal Oiled crystal Granule Appearance Light yellow crystal(granule) Initial M.P. �¿C â?¥ 66.0 66.0 66.0 Loss on drying % â?¤ 0.30 0.40 0.30 Ash % â?¤ 0.30 0.40 0.40 Residues on 840�¼m sieve, % â?¤ 0.00 0.00 -- Additive, % -- 1.0-2.0 -- Granule Diameter, mm -- -- 2.50 Properties: Light yellow crystal(granule). Odorless. Specific gravity: 1.27--1.30. Soluble in benzene, toluene, carbon disulphide, acetone and chloroform; Insoluble in water, dilute acid and alkali, partly soluble in gasoline and alcohol. Sensitive to skin and mucosa. Have certain toxicity, good storage stability. Application: A primary accelerator and curing agent for NR, SBR, nitrile and EPDM. The efficiency sulphur content is 11%. Closely resembles Accelerator TMTD in its applications. Have high catalytic action to acids and guanidine type accelerator. Less scorch and blooming, good processing safety. Can be used in CR as an anti-scorching agent and as raw material for germicide, pesticide and medicine. Packaging: 25kg plastic woven bag, paper wilh plastic film bag, kraft paper bag Storage: The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The product with pallet should not be stacked. Stacking of palletized material or temperature of above 35â?? can cause unusual compacted product.The validity is 2 years.
Chemical Name: Zinc 2-mercaptobenzothiazole Specification: Item MZ-5 MZ-15 Powder Oiled powder Powder Oiled powder Appearance Light yellow powder Light yellow powder Initial M.P. �¿C â?¥ 200.0 200.0 200.0 200.0 Loss on drying % â?¤ 0.30 0.50 0.30 0.50 Zinc content % 16.0-22.0 16.0-22.0 15.0-18.0 15.0-18.0 Free M % â?¤ 5.0 5.0 15.0 15.0 Residues on 150�¼m sieve, % â?¤ 0.10 0.10 0.10 0.10 Additive, % -- 1.0-2.0 -- 1.0-2.0 Properties: Light yellow powder with light bitter taste. Specific density is 1.65--1.72. Hardly soluble in acetone, benzene, ethanol, and carbon tetrachloride. Insoluble in water, gasoline. Decomposed in strong acid and alkali. Application: Used for NR, IR, SBR, NBR, EPDM and latex. May be regarded as an intermediate between Accelerator MBT and Accelerator MBTS. Used as a secondary accelerator in combination with Accelerator ZDMC and Accelerator ZDEC. Have the similar performance as MBT at curing temperature in dry rubber application. Has lower scorch and better has processing safety. Suitable for mold curing. Requires zinc oxide and stearic acid as activators in many kinds of rubber batch. Easily disperses in rubber; yields non-staining and non-discoloring products. Mainly used in the manufacture of latex products, foam rubber, latex coating gloves, etc. Packaging: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag or jumbo bag Storage: Keep container tightly closed in a cool, well-ventilated place. The recommended maximum storage life is 2 years when stored under normal conditions.
standard: GB13454-92 CAS NUMER: 9003-08-1 HS CODE:3909.10.00 certifications: ISO9001,ISO14001 free samples: 500g/color MOQ:120FCL= 20 tons molding temperature: 160-180°C Grade (as per molding method): Compression grade color:white,winner,water,cream,VV,MK,green,ivory,violet,orange,green,red,black,etc. as per you request. features: high strength,anti-scratch,anti-PH,anti-heat,no poison,good shinning,no color changing with long term use, easy-molding,etc. Lead time: normally within 1 week after receiving your deposit or L/C,or according to yout order quantity. Applications: melamine moulding compound is widely used to produce all imitation porcelain dishware such as plate, bowl and chopstick; Entertainment products such as mahjong, domino, chess and dice; Commodity products such as socket, switch, plug and electrical enclosure. Advantages: We have more than 20 years experiences in producing and marketing urea molding compound powder or granular,and our company have a professional producing team and color blending team,we guaranteen the products high quality with competitive price. Storage: Kept in airy, dry and cool room. Package:plastic knitting bag with inner wet proof plastic bag,25kg/bag Storage period: six months from the manufacturing date. Test should be undertaken when expires. Qualified products can still be used. Transportation Caution: avoid moisture, heat, dirt and packaging damage.
Cationic surface sizing agent ( compete with bk532) The main data: Product name: cationic surface sizing agent (sae based) Appearance: milk white to light brown liquid The main description: Cationic surface sizing agent is a new type of surface sizing agent that synthesized by the copolymerization of styrene and ester. It can efficiently combinate with starch and lead to good cross link intensity and hydrophobic properties.With lower dosage, lower cost and easy use advantages, it has good film-forming property which can significantly improve the water-resistance and ring-crush strength of board paper and corrugated paper.No curing period.Completely replace the usage of internal sizing agent. The main application: Its correspondence product name is bk532.Based on large quantity application experience in varies paper mills, we improve the recipe day by day, finally quality is the top grade in the market.It can be used with starch to reduce sizing cost.It also has good mechanical stability with less bubbles generated during the operational process.After finish the starch cooking, keep the temperature at about 70-75, add in this product based on 1-2kg per ton paper(actual dosage should be depend on practice), use alum to adjust the ph to be 3.5-4.0, then metering in size press. Packing & storage: Packing: 200kgs pp drum or 1000kgs ibc drum Storage: store in a cool, dry place. When loading and unloading, you should take care to prevent packaging and containers being damaged, avoiding leakage. Quality standard: Item Standard specification Appearance Milk white to light brown liquid Ionic Cationic Solid content 30%min Ph 5max Viscosity(25).Cps 30max Shelf life 6-12months
Anionic surface sizing agent (styrene acrylic based) The main data: Product name: anionic surface sizing agent (sae based) Appearance: white to light brown liquid The main description: Anionic surface sizing agent is a new type of surface sizing agent that synthesized by the copolymerization of styrene and ester.It can efficiently combinate with starch result good cross link intensity and hydrophobic properties.With lower dosage, lower cost and easy use advantages, it has good film-forming property which can significantly improve the water-resistance and ring-crush strength of culture paper such as offset printing paper and electro-photographic paper.Our quality can compete with basf 400ds and basf8903/8906. The main application: It can be applied in combination with anionic and nonionic auxiliaries such as starch, direct dyes, acid dyes and fluorescent whitening agents, etc.The paper does not necess arily have to be sized at the wet end and before it is applied, but this can be an effectiv e means of controlling the extent to which the size is able to penetrate. No curing period, completely replace the usage of internal sizing agent.It can be used with starch to reduce sizing cost.It also has good mechanical stability with less bubbles generated during the operational process.Application temperature should be less than 75 Packing & storage: Packing: 200kgs pp drum or 1000kgs ibc drum Storage: store in a cool, dry place. When loading and unloading, you should take care to prevent packaging and containers being damaged, avoiding leakage. Quality standard: Item Standard specification Appearance White to light brown liquid Ionic Anionic Solid content 25%min Ph 2-4 Viscosity(25).Cps 50max Shelf life 6-12months
Anti Tack Agent Powdered film release agent Description Powdered film release agent can prevent the adhesion between uncured and mixed films during storage. Anti tack agent is composed of inorganic fillers and active agents. Anti tack agent has good wetting and isolation properties for different soft and sticky films. Anti tack agent can be well dissolved in rubber during rubber vulcanization without affecting its flow and other properties. Technical data Composition: A mixture of inorganic fillers and active agents. Appearance: light grayish white powder Dissolution stability: Dispersible in water and will not settle in a short period of time. Usage: The recommended concentration of Anti tack agent is 3.5±1%, which is determined by the temperature of the processing workshop, the composition of the rubber and the Shore hardness of the mixed rubber. Usually in summer and some easy-to-stick rubber, a high concentration should be used, otherwise, a low concentration should be used. Anti tack agent forms an elastic film on the surface of the mixed film, which has a good isolation effect and prevents dust from sticking to the glue, thus avoiding troubles in the post-processing process. Anti tack agent only has a slight soft deposition on the surface of the equipment, which is easy to remove. The product has anti-corrosion properties and does not produce annoying foam when the item is mixed.
Wholesale Stainless Steel Pet Bowl for Dogs Cats OEM and ODM are accepted No MOQ requirement, small orders are accepted Serve up dinner in style with the Founddream Stainless Steel Pet Bowl. The smart design helps keep kibble in its place in the bowl and features a wide rubber base that keeps it from tipping, even if your pal is extra hungry. Stainless steel is stain-proof, rust-resistant and easy to clean by hand or in the dishwasher. It's the perfect bowl for all your pet's meals and water too. Founddream.com, a trusted wholesaler and manufacturer of pet products in China. Many retailers and amazon sellers have sourced the pet supplies from us to increased the sales of their store. A good vendor of yours will help you increase more sales. Durable stainless steel pet bowl is stain- and rust-resistant. High-quality polished finish so they look great in any home decor. Non-skid base ensures a secure grip to prevent tipping and spills. Rubber base also helps protect your floors. Easy to clean for a hygienic eating experience for your pal. Dishwasher safe. Bowl & Storage Feature Non-Skid, Dishwasher-Safe Lifestage Puppy Breed Size Medium Breeds Material Stainless Steel, Metal Frame Material N/A Compatible Food Dry Food, Wet Food
Euro 20,65 TAX INCLUDED. SKU: TVL-865 COLOR: PINK The best travel pet bowl on the market. Kiwi Walker bowls will make your journey with your pet easy and enjoyable. Travel Double Bowl is not one, but two great bowls - 350 ml each, compactly folded into a small package that can always be at hand! The bowls are made of the highest quality silicone, are scratch-resistant, do not absorb unpleasant odors, are durable and easy to clean. The body looks thin, opens with a zipper, and the bowls themselves are attached to the body thanks to Velcro tape. Thanks to mobility, your favorite bowls from the Travel Double Bowl set will always be with you! Advantages: The Travel Double Bowl is available in 4 bright and cheerful colors Sleek and stylish, a high-quality case that's also super durable The removable bowls are dishwasher safe for thorough cleaning Slim and compact for easy storage and travel Perfect for offering both food and water to your pet while traveling. Can be washed in the dishwasher at 30 �°C Size-16.5x4.5(8.0*)x16.5cm (* unfolded bowl height)
Plump & juicy our sustainably farmed white Mexican shrimp are grown in Pacific Ocean salt water producing a less sweet more nutty flavour than your standard farmed shrimp. Often imitated but never duplicated, we stand by our Mexico Pacific shrimp as being the ONLY true white Pacific shrimp on the market. Features & Benefits -Sustainably Farmed -No Added Chemicals -100% Natural -Consistent Sizing -Perfect with Any Topping -Individually Quick Frozen Varieties: White shrimp (Penaeus Vannamei). ** This product may cause allergies in susceptible people. Size Available: 16/20 | 21/25 | 26/30 | 31/35 | 36/40 | 41/50 | 51/60 | 61/70 | 71/90 Formats Available: Easy Peel | Peeled & Deveined / Tail On | Peeled & Deveined / Tail Off | Cooked / Tail On | Cooked / Tail Off | Headless / Shell On | Head On / Shell On | Butterfly Product Specs: Shelf-Life 24 Months / Storage 0�ºF.
Geophinex(GP-3D-W) is one of the most powerfully designed Groundwater and Mineral exploration instruments to investigate fault zones and water-bearing fractures with the means of Geo magnetic sensing technique with more advanced techniques that did not exist in competitive makerâ??s instruments 1. Ease of location finding / 3D depth finding, visualization/pdf report generation 2. Bore-well depth finding in display /3D earth profile mapping 3. Fracture Zone Report / 3D earth rock information 4. Warranty 2 Years 5. Power Bank for Continuous /emergency charging 6. Bore-Point yield value in display/ Email facility 7. Mobile Phone pairing with Unit 8. Report Display in Mobile Phone/ laptop/tablet 9. Location Storing + Report Storing in both unit and Mobile phone 10. GPS Location storage in the unit as well in mobile along with customer details and bore point notes. Uses both VHF and VLF Technology 11. The unit can be controlled with Mobile Phone pairing (Mobile APP)/Laptop 12. Any amount of customer bore point data can be stored, retrieved later and can be checked for the exact bore point location.
