Diacetyl Tartaric Acid Esters of Mono and Diglycerides Characters: Ivory or straw yellow powder or granular solid which is easily soluble in hot water. It is a non-ionic emulsifier with HLB value of 8-10. Applications: It can produce strong effects such as emulsification, dispersing and aging resistance, so it can be used as good emulsifier and dispersant. (1) It can increase the springiness, toughness and gas-holding capability of dough effectively, reduce its softening degree, increase volume of bread and steam bread, and improve their organization and structure. (2) It can react with amylose to delay and prevent the food aging. (3) It can be used in cream to make it smoother and finer. (4) It can be used in butter and concentrated butter to prevent oil separating and enhance its stability. (5) It can also be sued in sugar, syrup and spices. (6) It can be used in non-dairy creamer to make the emulsion homogeneous , stable and supple in mouth. Usage: (1) Put this product in warm water at about 60? to get paste shaped substance, and then use it in appropriate proportion. (2) Dissolve this product in oils or fats homogeneously before further processing. (3) Directly mix it with flour for use. Recommended Addition Amount: Addition maximum is 1.0% for raw dried flour products and raw wet products, while 5.0% for non-dairy creamers. The addition amount can be changed based on production need for cream and fermented milk. Technical Index (Conform to GB25539-2010 standard Acid value (Calculated by KOH) / (mg/g) 65-85 Saponification value (Calculated by KOH) / (mg/g) 390-450 Total tartaric acid(W/%) 10-40 Total glycerol(W/%) 11-28 Total acetic (W/%) 8-32 Free glycerol(W/%) 2.0 Ignition residue (W/%) 0.5 Pb/(mg/kg) 2 Packaging Aluminized bag vacuum packing with nitrogen inside. Net weight:20KG/CTN(5 KG *4) Storage & Transportation: Sealed and stored in the low temperature, dry, cool and well-ventilated place, in order to prevent from moisture and caking. Strictly forbid storing and trasporting with materials that is explorsive, combustible or deleterious. The shelf life is 12 months.
Linear vibrating screen is one of the best products of RT Machinery Co., Ltd. The linear vibrating screen is driven by a double vibration motor. When the two vibration motors rotate synchronously and counter, the exciting force produced by the eccentric block is counteracted in the direction parallel to the axis of the motor, and it is a force in the direction perpendicular to the axis of the motor, so the motion track of the screen is a straight line. The two motor shaft has a dip angle relative to the screen surface. Under the combined force of the exciting force and the material from the gravity, the material is thrown forward and jump straight forward on the sieve surface, so as to achieve the purpose of screening and grading the material. It is suitable for sieving of all kinds of dry powder materials with a particle size of 0.074-5mm and less than 70% water content. The maximum feed size is not more than 10mm. The main features of the linear vibrating screen are suitable for the industry. 1. good seal, very little dust overflow. 2. low energy consumption, low noise, long life of screen mesh. The 3. sieving accuracy is high, the amount of treatment is large and the structure is simple. 4. fully enclosed structure, automatic discharge, and more suitable for pipelining. 5. each part of the sieve body is made of welded steel plate and section bar (part of the body is bolted together). The overall stiffness is good, and it is reliable and reliable. The product is widely used in chemical, food, plastic, medicine, metallurgy, glass, building materials, grain, chemical fertilizer, abrasive, ceramics and other industries, such as dry powder or granular material sieving. Company Info Business Type:Manufacturer , Distributor/Wholesaler Product Range:Vibration sieve, vibrating screen, vibrosieve,riddler,oscillating screen,Shaker,Vibrating screen equipment,Screening machine,Sifter,sieve,screenï¼?linear vibrating screen Products/Service:Vibration sieve, vibrating screen, vibrosieve,riddler,oscillating screen,Shaker,Vibrating screen equipment,Screening machine,Sifter,sieve,screenï¼? linear vibrating screen Total Employees:51~100 Capital (Million US $):100,0000RMB Year Established:2008 Company Address:Mengzhuang Industrial Park,Huixian City,Xinxiang City,Henan Province,China Trade Information Incoterm:FOB,CFR,CIF Terms of Payment:T/T Average Lead Time:Peak season lead time:7 Off season lead time :7 Annual Sales Volume US$1.5 Million - US$2.5 Million http://en.xxteceng.com/xwzx/n3730.html
Contract length One Year Commodity Copper Cathodes Purity 9999 Cu Form Electrolytic Origin Republic of Zambia Quantity 61000MT Sixty One Thousand Metric Tons First shipment 1000 MT One Thousand Metric Tons Monthly shipment 5000 MT Five Thousand Metric Tons Price Less 12 Twelve Per cent LME Price of the day Loading Port Dar Es Salaam Port Tanzania or Durban Port South Africa Discharge Port xxx xxxxxxxx Incoterms Strictly CIF Cost Insurance and Freight Delivery term Strictly CIF Cost Insurance and Freight Payment Terms Secured by SBLC MT 760 Operative Irrevocable Non Transferable Unconditional Confirmable Standby Letter of Credit MT 760 as Payment Guarantee and finally by Telegraphic Wire Transfer MT 103 After Final Inspection of Quality and Quantity by SGSCICC report at final destination port until Five 5 banking days Note No advance payment will be required by Seller or his representative as long as the SBLC MT 760 is in place and is in active Seller shall use his own resources to ship the copper cathodes to Buyers destination Refinery 1SPECIFICATIONS NONLME Electrolytic Copper Cathodes Grade A Purity Cu 9999 Maximum 9997 Minimum conforming to the LONDON METAL EXCHANGE LME specification Cathode Grade Designation Cu Cath 1 CHEMICAL COMPOSITION ON DRY BASIS PERCENTAGE IN WEIGHT Cu 9996 9999 Rejection below 9996 Sulphur Sppm 4 Cobalt Coppm 02 Iron Feppm 2 Arsenic Asppm 01 Silver Agppm 10 Bismuth B1ppm 01 Lead Pbppm 02 Manganese Mnppm 01 Nickel Nippm 02 Tellurium Teppm 005 Selenium Seppm 03 Aluminium Alppm 05 Antimony Sbppm 01 Magnesium Mgppm 04 Silica Sippm 03 Zinc Znppm 04 2MEASUREMENT 914 mm x 914 mm x 12 mm LME Standards App 36 X36X05 Weight of each sheet 125 Kilograms Approximately 2 Net weight of each pallet 2000 Kilograms Approximately 2 Net weight per container 200 Metric Tons Approximately 2 Gross weight per container 222 Metric Tons Approximately 2 3 PACKING Palletised Aluminium banded Bundles of bare unsoiled nonoxidized Copper Cathode plates and banded by aluminium bands suitable for long distance transportation and well protected against scattering shock and rust Net weight of each bundle 25MT 1 No wooden packaging allowed 4PRICE AND PAYMENT GUARANTEE PROCEDURE Value of SBLC MT 760 shall be equivalent to one 1 month shipment value with a validity period of One Year and One Day Rolls and Extensions Both parties understand and agree that SBLC via MT 760 shall be issued only from one of the Top Prime Banks located in major cities of Middle east Western Europe Asia or US
Product Details Description Diesel EN 590 10 PPM Ultra low Sulphur , quality to conform, 50,000MT ±5% per month for 12 months PRODUCT: DIESEL EN590 10 PPM PRICE: US$ PER M/T CIF. ORIGIN: KAZAKHSTAN QUANTITY : 50,000 METRIC TONS �±5% PER MONTH FOR 12 MONTHS LOADING PORT: BATUMI PORT, GEORGIA DISCHARGE PORT: CIF, ANY EXCEPT HUSTON AND ROTTERDAM. PAYMENT: BANK GUARANTEE OR SBLC EITHER FROM PRIME BANK FOR THE AMOUNT ONE OR TWO SHIPMENTS. CONTRACT PAYMENT: SBLC AS PER VERBIAGE PROVIDED VALID FOR 13 MONTHS FROM PRIME BANK, MT103 FOR EACH SHIPMENT. PERFORMANCE BOND: 2% APPLICABLE FOR EACH MONTHLY QUANTITY, REVOLVING FOR THE ENTIRE CONTRACT PERIOD BUT NOT THE TRIAL SHIPMENT. REMARKS: SUBJECT TO MAJOR FORCE. SHIPPING COMMENCEMENT: SHIPMENT STARTS WITHIN 20-25 DAYS OF CONFIRMING THE BUYER FINANCIAL INSTRUMENT. 1. BUYER WILL ACCEPT THIS SCO BY SIGNING & STAMPING ACCEPTANCE PAGE AT THE END OF SCO, AND STAMPING ON THE SPECIFICATIONS PAGE. THEN ISSUES ICPO WITH COMPANY REGISTRATION CERTIFICATE AND REPRESENTATIVE VALID IDENTIFICATION DOCUMENT, WITH BANK COMFORT LETTER BCL. 2. SELLER ISSUES SPA OPEN FOR AMENDMENTS. 3. BUYER RETURNS THE SPA DULY SIGNED VIA E-MAIL TO CONSULTANTS WHO SENDS TO THE SELLERS. BUYERS BANK PROVIDES DRAFT COPY OF SBLC OR BG TO THE SELLER FOR APPROVAL BY THE SELLER AND HIS BANK. 4. SELLER SENDS THE FOLLOWING POP DOCUMENTS TO BUYER THROUGH ITS AGENT WITHIN 7 TO 9 DAYS AFTER RECEIPT OF FINANCIAL ACCEPTABLE INSTRUMENT AT SELLERS BANK. * COMPANY STATEMENT OF AVAILABILITY OF THE PRODUCT. * COPY OF PRODUCT PASSPORT ANALYSIS THROUGH SEPARATE LAB. * CHARTER PARTY AGREEMENT (CPA) AS A COMMITMENT TO SUPPLY THE GOODS. 5. WITHIN 5-7 BANKING DAYS, BUYERâ??S BANK SENDS SBLC OR BG FROM PRIME BANK OR CONFIRMED BY PRIME BANK FOR TRIAL SHIPMENT VIA MT760 (ACCORDING TO SELLERâ??S FIDUCIARY BANK VERBIAGE), TO SELLER NOMINATED FIDUCIARY BANK ACCOUNT FOR THE VALUE OF ONE-MONTH SHIPMENT VALID 60 DAYS FROM DATE OF ISSUE FOR TRIAL SHIPMENT. THEN FOR REGULAR YEARLY CONTRACT WILL BE 14 MONTHS SBLC FOR TWO MONTHS VALUE. 6. SELLER WILL KEEP THE BUYER FULLY INFORMED OF THE SHIPMENT AS PER SPA. 7. SHIPPING COMMENCES AS PER CONTRACT. UPON ARRIVAL OF CARGO AT DISCHARGE PORT, PAYMENT IS EFFECTED VIA MT103, WITHIN 3 DAYS AFTER SUCCESSFUL SGS INSPECTION/REPORT AND AGAINST PRESENTATION TO BUYERâ??S BANK OF COMPLETE SET OF EXPORT DOCUMENTS. SELLER TRANSFERS THE TITLE OWNERSHIP TO BUYER SELLER AND BUYER MAINTAIN COMMUNICATION LINK AS STARTED THROUGH THE AGENTS WHICH IS A MUST FOR SMOOTH TRANSACTION. SBLC/BG WILL BE RETURNED BACK UNTOUCHED IF BUYER PAYS THE SHIPMENT BY MT103 WITHOUT DELAY IN THE SPECIFIED TIME FOR ALL SHIPMENTS INVOLVED FOR 1ST AND 12 MONTHS SHIPMENTS. SBLC IS A GUARANTEE FOR PAYMENT BY THE BUYER FOR EACH SHIPMENT. 2% PERFORMANCE BOND IS A GUARANTEE FOR SHIPMENT BY THE SELLER.
Panama Petrochem Ltd, manufactures Rubber Process Oils which are widely used across various industries and are popular as safe and environment friendly products. Different grades of superior quality Rubber Process Oils are offered which are used for the manufacturing of various rubber produces, from both natural as well as synthetic rubber. Under the brand name Panol, 3 Grades are offered namely, PANOL C 160-A – (Aromatic Base) PANOL C 160-P – (Paraffinic Base) PANOL C 160-N – (Naphthenic Base) Also, Speciality Rubber Process Oils meeting European Regulation for non-carcinogenic oils, Mild Extracted Solvent (MES), Residual Aromatic Extracted Solvent (RAE) and Treated Distillate Aromatic Extracted Solvent (TDAE), are offered on request. PANOL C 160-A Panol C 160-A is an Aromatic type of Rubber Processing Oil, formulated from specially selected aromatic furfural extracts with higher aromatic content. It is available with different viscosities as required for different applications. High rubber and polymer solvency Widely used in the manufacturing of automotive tyres and tubes, bi-cycle tyres, tyres retreading materials, belting, hoses, battery containers, extruded products and technical moulded goods Highly suitable for Natural Rubber, Styrene Butadiene Rubber, Polybutadiene Rubber and Neoprene Rubbers Offers good compatibly and is suitable for use with Natural Rubber, SBR, PBR, CR etc. PANOL C 160-P Panol C 160-P are Paraffinic type Rubber Processing / Extender Oils formulated from highly refined solvent extracted base stocks of low sulphur content. These oils are used in the manufacturing of butyl tubes and a variety of technical moulded and extruded products based on polar rubbers like EPM & EPDM etc. They have good thermal stability and are suitable in the manufacture of light coloured products and because of their high paraffinic content and viscosity, these oils are preferred for achieving high retention of properties after ageing and higher loading of oil They are used for heat resistant conveyor belts and steam hoses PANOL C 160-N Panol C 160-N serws grades are Napthenic type Rubber Processing / Extender Oils formulated from carefully selected Hydrotreated Napthenic base stocks. These are non-staining in nature and posses excellent thermal, oxidation and colour stability They are recommended in the manufacture of automotive tubes, light coloured non-back footwear products and also moulded and extruded goods They are compatible for processing with NR, SBR, PBR, Butyl and EPDM rubbers Special tailor-made blends are also available for TPR and other specific applications SPECIALITY RUBBER PROCESS OILS We manufacture and offer Speciality Rubber Process Oils meeting European Regulation for non carcinogenic oils. We have a wide range of Mild Extracted Solvent (MES), Residual Aromatic Extracted Solvent (RAE) and Treated Distillate Aromatic Extracted Solvent (TDAE).
SIDA Factory KBM-18B small automatic hydraulic dry ice pellets making machine, dry ice pelletizer, dry ice making machine, dry ice maker, dry ice machine, dry ice granular making machine, dry ice grain making machine, dry ice particle making machine, dry ice rice making machine. Technical Parameters: Model no.: KBM-18B dry ice pelletizer Raw material: liquid CO2 cryogenic tank (water content less than 60ppm) or dewar Size of dry ice pellets: 3mm, 14mm Output of dry ice making machine: 30kg/h Density of dry ice : >1500 kg/m3 Conversion rate of dry ice: 40% (100kg CO2 can produce 40kg dry ice) Motor power: 2.2kw, 3phase 380V 50Hz Run: hydraulic Volume of hydraulic oil tank: 20L Size (L*W*H): 700*435*680 mm Total weight: 110 kg Remarks: this product is the third generation improved, very reliable and perfect for users who sell less than 200kg dry ice per day. Main configuration of dry ice machine: 1.CPU and electrical equipment components are used from Korea. 2. Hydraulic pump is used oil pump from Japan. 3. Oil pump motor is used Qunce motor from Taiwan . 4. Hydraulic valve is used Yuken product from Japan. 5. Raw material control valve adopts foreign brand. Feature: 1.Desktop type design with stainless steel shell, only 1/3 land occupation than other same products. 2. Full automatic CPU control system and advanced hydraulic system design with imported components used, more reliable. 3. Special design can still keep good running when the liquid CO2 water content is high. 4. Patented recycle technology of waste CO2 gas to cool hydraulic oil tank to make sure working temperature below 400C, enable the components lifetime are longer and the machine can run 24 hours continuously. 5. Equipped trundles, easy to move. 6. Different size pellets can be produced by changing extruder mould. 7. This product is the third generation improved, very reliable. Application: 1.Used for produce high density dry ice pellets 3mm for dry ice blasting cleaning. 2. Also used for produce larger dry ice particles for cooling purpose. 3. The dry ice grains are widely used for tyre production enterprises, precision casting, printing, engine maintenance and other enterprises as the raw material of dry ice jet cleaning; refrigerated transportation and catering entertainment industry to do fog and cloud effect. Production Steps: 1. Gas company 2. Liquid CO2 cryogenic tank or dewar 3. Dry ice pelleting machine 4. Dry ice storage box
SIDA Factory KBM-80 automatic hydraulic dry ice pellets making machine, dry ice pelletizer, dry ice making machine, dry ice maker, dry ice machine, dry ice granular making machine, dry ice grain making machine, dry ice particle making machine, dry ice rice making machine. Technical Parameters: Model no.: KBM-80 dry ice pelletizer Raw material: liquid CO2 cryogenic tank (water content less than 60ppm) Size of dry ice pellets: 3mm, 16mm Output of dry ice making machine: 80kg/h Density of dry ice: >1500 kg/m3 Conversion rate of dry ice: 40% (100kg CO2 can produce 40kg dry ice) Motor power: 4kw, 3phase 380V 50Hz Run: hydraulic Volume of hydraulic oil tank: 60L Size (L*W*H): 780*660*1200 mm Total weight: 400 kg Remarks: This product is suitable for users who sell less than 1000kg dry ice per day. Main configurations of dry ice machine: 1.CPU and electrical equipment components are used from Korea. 2. Hydraulic pump is used plunger type variable oil pump from Taiwan. 3. Oil pump motor is used Qunce motor from Taiwan . 4. Hydraulic valve is used Yuken product from Japan. 5. Raw material control valve adopts foreign brand. Feature: 1. Exquisite design with stainless steel shell, only 1/2 land occupation (0.6m3) than other same products. 2. Full automatic CPU control system and advanced hydraulic system design with imported components used, more reliable. 3. Special design can still keep good running when the liquid CO2 water content is high. 4. Patented recycle technology of waste CO2 gas to cool hydraulic oil tank to maintain best working temperature at 40~500C, enable the components lifetime are longer and the tank volume is small, only need 60L, while 150L for other same products. 5. Different size pellets can be produced by changing extruder mould. Dry ice pelletizer application: 1. Used for produce high density dry ice pellets 3mm for dry ice blasting cleaning. 2. Also used for produce larger dry ice particles for cooling purpose. 3. The dry ice grains are widely used for tyre production enterprises, precision casting, printing, engine maintenance and other enterprises as the raw material of dry ice jet cleaning; refrigerated transportation and catering entertainment industry to do fog and cloud effect. Production Steps: 1.Gas company 2. Liquid CO2 cryogenic tank 3. Dry ice pelleting machine 4. Dry ice storage box
SIDA Factory KBM-300 automatic hydraulic dry ice pellets making machine, dry ice pelletizer, dry ice making machine, dry ice maker, dry ice machine, dry ice granular making machine, dry ice grain making machine, dry ice particle making machine, dry ice rice making machine. Technical Parameters: Model no.: KBM-300 dry ice pelletizer Raw material: liquid CO2 cryogenic tank (water content less than 60ppm) Size of dry ice pellets: 3mm, 18mm Output of dry ice making machine: 270~300kg/h Density of dry ice: >1500 kg/m3 Conversion rate of dry ice: 40% (100kg CO2 can produce 40kg dry ice) Motor power: 11kw, 3phase 380V 50Hz Run: hydraulic Volume of hydraulic oil tank: 180L Size (L*W*H): 1250*900*1670 mm, oil cylinder holds out 700mm Total weight: 1300 kg Remarks: This product is suitable for users who sell less than 3000kg dry ice per day. Main configurations of our dry ice machine: 1.CPU and electrical equipment components are used from Korea. 2. Hydraulic pump is used plunger type variable oil pump from Taiwan. 3. Oil pump motor is used Qunce motor from Taiwan . 4. Hydraulic valve is used Yuken product from Japan. 5. Raw material control valve adopts foreign brand. Feature: 1. Vertical type design, only 1/2 land occupation than other same products. 2. Full automatic CPU control system and advanced hydraulic system design with imported components used, more reliable. 3. Vertical design for dry ice generator and extruder, no gravity frictional wear than other horizontal design, the seal and piston lifetime are greatly extended too. 4. Equipped dry ice yield increasing device to reduce CO2 waste. 5. Patented recycle technology of waste CO2 gas to cool hydraulic oil tank to maintain best working temperature at 40~500C, enable the components lifetime are longer and the tank volume is small, only 180L, while 300L for other same products. 6. Special design can still keep good running when the liquid CO2 water content is high. 7. Different size pellets can be produced by changing extruder mould. 8. The power is only 11kw, while 18.5kw for other same products. Application of dry ice pelletizer: 1. Used for produce high density dry ice pellets 3mm for dry ice blasting cleaning. 2. Also used for produce larger dry ice particles for cooling purpose. 3. The dry ice grains are widely used for tyre production enterprises, precision casting, printing, engine maintenance and other enterprises as the raw material of dry ice jet cleaning; refrigerated transportation and catering entertainment industry to do fog and cloud effect. Production Steps: 1.Air company 2. Liquid CO2 cryogenic tank 3. Dry ice pelleting machine 4. Dry ice storage box
SIDA Factory KBM-150 automatic hydraulic dry ice pellets making machine, dry ice pelletizer, dry ice making machine, dry ice maker, dry ice machine, dry ice granular making machine, dry ice grain making machine, dry ice particle making machine, dry ice rice making machine. Technical Parameters: Model no.: KBM-150 (III generation) dry ice pelletizer Raw material: liquid CO2 cryogenic tank (water content less than 60ppm) Size of dry ice pellets: 3mm, 16mm Output of dry ice making machine: 135~150kg/h Density of dry ice: 1500 kg/m3 Conversion rate of dry ice: 40% (100kg CO2 can produce 40kg dry ice) Motor power: 5.5kw, 3phase 380V 50Hz Run: hydraulic Volume of hydraulic oil tank: 110L Size (L*W*H): 1250*720*1670 mm, oil cylinder holds out 550mm Total weight: 680 kg Remarks: This product is suitable for users who sell less than 1500kg dry ice per day. Main configurations of dry ice machine 1.CPU and electrical equipment components are used from Korea. 2. Hydraulic pump is used plunger type variable oil pump from Taiwan. 3. Oil pump motor is used Qunce motor from Taiwan . 4. Hydraulic valve is used Yuken product from Japan. 5. Raw material control valve adopts foreign brand. Features: 1. Vertical type design, only 1/3 land occupation than other same products. 2. Full automatic CPU control system and advanced hydraulic system design with imported components used. 3. Vertical design for dry ice generator and extruder, no gravity frictional wear than other horizontal design, the seal and piston lifetime are greatly extended too. 4. Equipped dry ice yield increasing device to reduce CO2 waste. 5. Patented recycle technology of waste CO2 gas to cool hydraulic oil tank to maintain best working temperature at 400C, enable the components lifetime are longer and the tank volume is small, only 110L, while 300L for other same products. 6. Special design can still keep good running when the liquid CO2 water content is high. 7. Different size pellets can be produced by changing extruder mould. 8. This product is the third generation improved, very reliable. Application of dry ice pelletizer 1. Used for produce high density dry ice pellets 3mm for dry ice blasting cleaning. 2. Also used for produce larger dry ice particles for cooling purpose. 3. The dry ice grains are widely used for tyre production enterprises, precision casting, printing, engine maintenance and other enterprises as the raw material of dry ice jet cleaning; refrigerated transportation and catering entertainment industry to do fog and cloud effect. Production Steps: 1.Gas company 2. Liquid CO2 cryogenic tank 3. Dry ice pelleting machine 4. Dry ice storage box
product specification puffed food packing machine automatic chocolate packing machine automatic granule filling machine stainless steel packing machine automatic powder packing machine packing machine for granular material packing machine for dried fruit chips automatic vertical granule packaging machine automatic popcorn packaging machine puffed food packing machinery sunflower seeds packing machine automatic weight packing machine 100g peanuts packing machine granule weighing packing machine packing peanuts machine automatic peanuts packing machine coffee stick pack packing machine automatic peanuts packing machinery vertical packing peanuts machine counting and packing machine peanuts packing machine peanuts packets packing machine automatic peanuts packing machine polly seeds big bag packing machine rotary weighing and packaging machine polly seeds big bag packing machine automatic weighing packaging machine 1kg puffed food packing machine low price puffed rice weighing machine tea granules packaging machinery granule powder vertical ffs packing machine vertical granule packing machine seal bags packing machine vffs sugar packaging machine for sachets filling sealing packaging machine granule food ffs packing machine auto dry granule packing machine automatic sugar packing machine high speed salt packing machine salt stick sachet packing machine automatic food sachet packing machine price of sugar packaging machine salt sugar packaging machine gourmet powder packing machine total automatic seeds wrapping equipment automatic powder rotary filling machine sachet coffee stick packing machine liquid stick pack packing machine sachet sugar packing machines stick sachet packing machine automatic granule packing machine sugar stick packing machine price stick sachets liquid packing machine particles/granulator packing machine packaging machine for sugar This machine is applicable for the dosing and packaging of granule,powder and liquid materials like wheat flour, puffed food, granulated sugar,medicine and tea,ect which are used in food medical and chemical industries. According to different materials to choose blanking device. IMG_2723.JPG2.jpg QQ20150913204826.png Machine features: 1. This machine can finish : forming bag--measuring--material fillingâ??sealingâ??countingâ??date code printing all the work automatically; 2. Photoelectric and tracing system or computer system can be provided without your specific requirements. 3. The PLC/CPU controller has the advantages such as setting the length of the bag; the out put alarm and the speed and quantity with buttons; 4. This machine can be installed to code printer for 1-3 lines characters such as production and expiry date according to your special request. 5. Piston pump filling measuring, high accuracy with no leaking. Applicable packing film: Paper/PE, PT/PE, PET/AL/PE, BOPP/PE, Tea filter paper and other compound materials can be heat sealed. processing.png advantage 1.Packing machine is Full Automatic. Feeding, Dosing, Printing (Date), Filling. Bag Forming, and Sealing. 2.Packing machine can made of Carbon steel with powder coating, or Stainless Steel 304. 3:Easy operation. Most of parameter resetting by Touch Screen. Multi-language for client choose. 4:Film moving by Servo motor and a pair of belt, Horizontal and Vertical sealing temperature is independent. Make sure bag is beautiful and sealing very well. 5: Packing machine have alarming function, any wrong with it will show you soon.
In recent years, more and more activated carbon are used in precious metals extraction process, preferred type of activated carbon is coconut shell activated carbon. Next I will lead you to Learn more about coconut shell activated carbon as Mingyang activated carbon for the extraction of precious metals. No.1 Definition of Gold extraction of activated carbon Nut shell activated carbon is an excellent adsorbent, currently there are two kinds Nut shell activated carbon for the gold extraction : apricot shell activated carbon and coconut shell activated carbon.Coconut shell activated carbon is better than apricot activated carbon, because coconut shellâ??s adsorption capacity is better than Apricot shell , the fundamental reason is that coconut shells Gold extraction of activated carbon can absorb more steam to make more holes in the activation process, more porous, the ability to adsorb also increased; and apricot shell because of its own Skin thinner, determines that they can not adsorb more steam, compared with the adsorption capacity of Mingyang Coconut activated carbon effect is not good. Coconut shells Gold extraction of activated carbon is is based on high-quality coconut shell as raw material, by drying, crushing, carbonation, activation, catalysis and other production processes refined.The appearance is black amorphous particles,it has two kinds as granular and columnar.The advantages are that pore structure developed, adsorption performance, high strength, easy regeneration, economic and durable. No.2 Technical indicators of Gold extraction of activated carbon How to detect indicators of activated carbon adsorption capacity? On coconut shells Gold extraction of activated carbon, I summed up the following aspects: Project test data Project test data Particle size 0.4-3mm true specific gravity 2-2.2g/cm3 Adsorption rate of benzene powder â?¥450mg/g Bulk specific gravity 0.35-0.55g/cm3 Intensity â?¥80-95% Total pore volume 0.7-1cm3/g Iodine value 700-1100mg/g specific surface area 590-1500m2/g Methylene blue value 100-150mg/g PH value 8-10 Semi-dechlorination value â?¤5cm Ash â?¤8-12% Water â?¤3% specific heat -1.00J/g.â?? No.3 Adsorption of Gold extraction of activated carbon Coconut shells from the raw materials directly from the carbonization of coconut shells has low iodine value and adsorption capacity is poor, the basic proportion is more than 600. After activation Coconut shell activated carbon becomes Gold extraction of activated carbon, iodine value at least turns 2-3 times and mention the effect of gold extraction significantly. Introduction of activated carbon activation method has introduced that because in the activation process by adding steam the temperature increases so that the coconut shell carbonized material begin to create holes, 10 hours later the coconut shell carbonization material itself caused many pores and then the size of screening, finally bagging molding.
Copra without sulphur.
Urea 46 ( prilled, granular) agriculture.
Fertilizers Like Urea N46 Granular..
Urea 46% Agriculture Granular And Prilled..
Fertilizers Like Urea, Granular N46..
Fertilizers Like Urea Granular N46.
Fertilizers Like Urea Granular N46.
We trade urea 46% . We can also produce different formulations according to customer demand.
Sulphur black, sulphur dyes, direct dyes, basic dyes, acid dyes..
