Porous titanium sheets are highly desirable for use as the porous transport layer (PTL) in polymer electrolyte membrane (PEM) water electrolyzers. However, the passivation of titanium leads to an increase in surface contact resistance, thereby negatively affecting the performance of the electrolyzer. To address this issue and ensure long-term operation, a common approach is to apply platinum or gold coatings on titanium-based PTLs. Parameters Material: Sintered Porous Titanium Sheet Coating: Platinum (Pt) The thickness of platinum: 1 micron Porosity: Customizable, commonly between 30% and 40% Pore Size: 10 microns Size: 46*46* 2mm Features Enhanced Conductivity: The platinum coating on sintered porous titanium sheets provides excellent electrical conductivity, facilitating efficient electron transfer during electrochemical reactions. Durability and Corrosion Resistance: Titanium's inherent corrosion resistance, combined with the protective platinum coating, ensures prolonged electrode lifespan, even in aggressive chemical environments. High Surface Area: The porous structure of the titanium sheets offers a large surface area, enabling more active sites for electrochemical reactions and enhancing cell efficiency. Customizable Pore Size: The pore size of sintered porous titanium sheets can be tailored to specific applications, allowing for optimized mass transport and improved electrolyte flow. Applications Chlor-Alkali Industry Water Treatment Fuel Cells Electrosynthesis
2mm GR1 Seamless Titanium Capillary Tube for Medical is a small, thin-walled tube made of titanium metal. It is mainly used in applications requiring high corrosion resistance, high strength and light weight. Parameter: Material: Pure titanium Grade: GR1 Outer diameter:2mm Wall thickness: 0.4mm Length: Max. 6000mm Surface treatment: polished Certificates: ISO9001:2015 Features 1.Capillary effect: Due to the very small diameter of the titanium capillary, the liquid will exhibit a capillary effect in it. This means that liquids can exhibit special flow behaviors in pipes, such as self-priming, condensation, and lifting. The capillary effect makes titanium capillaries very useful in specific applications, such as microfluidics, liquid chromatography and analytical chemistry. 2.Corrosion Resistance: Titanium is a metal with excellent corrosion resistance. Titanium capillaries are resistant to a variety of corrosive media, including acids, bases, salt water, and oxides. This makes titanium capillaries versatile for applications involving corrosive environments or chemicals. 3.Strength and Lightweight: Despite titanium's excellent strength, its relatively low density makes titanium capillary a lightweight tubing choice. This enables it to reduce overall weight in applications that require strength and rigidity, such as structures and equipment in the aerospace sector. 4.Biocompatibility: Titanium is a biocompatible material that is well tolerated by human tissues and organisms. This makes titanium capillaries widely used in medical devices and biomedical fields, such as artificial joints, implantable devices and biosensors. Applications 1.Orthopedic implants 2.Dental applications 3.Cardiac stents 4.Neural Implants 5.Medical devices and tools
Platinum-coated porous titanium plates are essential components used in electrolyzers for diverse industrial applications such as hydrogen production, water treatment, and energy storage. These plates play a critical role in facilitating efficient and reliable electrochemical reactions. Specifications: Material: porous Titanium plate Coating: Platinum (usually 0.2-5 microns thick) Porosity: 30%-40% Thickness: 0.6-20 mm Dimensions: Customizable based on specific electrolyzer requirements Surface Area: Varies based on design and application, usually 50-100 cm�² Features: Catalytic Efficiency: The platinum coating on the porous titanium plates provides exceptional catalytic activity, enabling rapid and efficient electrochemical reactions. This results in improved performance and higher reaction rates, contributing to the overall efficiency of the electrolyzer. Corrosion Resistance: Titanium is inherently resistant to corrosion, and the platinum coating further enhances this property, ensuring the longevity and stability of the plates even in harsh operating conditions. This resistance to corrosion guarantees the durability and reliability of the electrolyzer system. Enhanced Mass Transfer: The controlled porosity of the titanium plates facilitates effective gas diffusion and reactant accessibility. This feature enhances mass transfer, allowing for faster reaction kinetics and improved overall electrolyzer performance. Customizable Dimensions: Platinum-coated porous titanium plates can be customized to meet specific electrolyzer design requirements. The dimensions can be tailored to fit different system sizes and configurations, ensuring compatibility and versatility in various applications. Application: Hydrogen Production Water Treatment Energy Storage
Mixed-metal Coated Titanium Anodes for Trivalent Chromium Plating is a material used as an anode in an electrochemical reaction, and it is usually made of pure titanium or a titanium alloy. During the electrochemical reaction, Mixed-metal Coated Titanium Anodes for Trivalent Chromium Plating absorbs electrons and is oxidized, forming an oxide coating on its surface, commonly known as titanium anodic oxide (TAO). Parameter Substrate material: titanium Grade 1, titanium Grade 2 Dimensions: customer drawing welcomed Shape: Plate/Tube/Rod/Mesh shape MMO coating: Ir-Ta coating Coating thickness: 0.2-12m Temperature:
Titanium powder corrugated plates are commonly used in heat exchangers, where they help to improve the efficiency of heat transfer between fluids by increasing the contact area between the fluids and the plate surface. They are also used in the chemical and petrochemical industries, as well as in the aerospace and marine industries, due to their resistance to corrosion and high strength-to-weight ratio. Parameter Material: pure titanium, Ti-6Al-4V,Ti-3Al-2.5V Length: Max. 1000mm Width: Max.600mm Thickness: Max. 50mm Pore size: 0.2-60um Wave height: 0.2mm,0.3mm or customized Wave width: 1.2mm,1.3mm or customized Wave pitch: 0.7mm,0.8mm or customized The main steps for manufacturing titanium corrugated plate using titanium powder metallurgy process include: Titanium powder preparation: First, the titanium powder needs to be prepared into appropriate particle size and shape for further processing. Additive mixing: Mix the titanium powder with other additives such as copper, aluminum, etc. to improve the workability and mechanical properties of the titanium powder. Pressing and forming: Put the mixed titanium powder and additives into a mold for pressing and forming. This process needs to be carried out under high pressure, usually between 100MPa to 2000MPa. Sintering: Sinter the pressed and formed titanium powder at high temperature to make it into an integrated titanium corrugated sheet. This process needs to be carried out in an inert atmosphere to avoid oxidation. Heat treatment and surface treatment: After sintering, the titanium powder corrugated sheet needs to undergo heat treatment and surface treatment to improve its mechanical and corrosion resistance properties. Features 1.Stability under high temperature and high pressure: Titanium powder corrugated sheet can maintain stability and strength under high temperature and high pressure, and can therefore be used for filtration and separation in harsh environments such as high temperature, high pressure, and strong corrosion. 2.High filtration efficiency: The corrugated structure of titanium powder corrugated sheet can increase its surface area, thereby improving its filtration efficiency and capture capacity, especially suitable for applications that require high-efficiency filtration and separation. 3.Good mechanical properties: Titanium powder corrugated sheet has high strength, high hardness, and good ductility, and can withstand large mechanical stress and deformation. 4.Good corrosion resistance: Due to the use of titanium powder metallurgy process in the manufacture of titanium powder corrugated sheet, its material composition and structure can be controlled, thereby improving its corrosion resistance. 5.Easy to clean and maintain: The corrugated structure of titanium powder corrugated sheet can increase its surface area, making it easy to clean and maintain, reducing maintenance costs and time.
Titanium electrode plate for water treatment is a platinum group noble metal oxide with high electrocatalytic performance, strong oxidation resistance and good electrical conductivity coated on a pure titanium substrate, which is an insoluble anode. Product parameters Product name: Titanium electrode plate for water treatment Brand: TOPTITECH Product base material: Gr1 pure titanium Product coating: Ru/Ir/Pt (ruthenium iridium platinum) Product process: nano coating - high temperature sintering Specifications: customized according to customer requirements Product performance: 1. It has excellent properties such as corrosion resistance, high temperature resistance, high strength, easy guarantee of filtration accuracy, and easy regeneration; The plates is sintered at high temperature, so the surface particles are not easy to fall off; in the air the temperature in use can reach 300�°C; 2. It is suitable for filtering various corrosive media, such as: weak hydrochloric acid, sulfuric acid, hydroxide, sea water, aqua regia, and chloride solutions such as iron, copper, and sodium; 3. It has excellent mechanical properties, can be machined for cutting, welding, etc., has high compressive strength, and the internal pressure breaking strength is as high as 0.3MPa; 4. The regeneration method is simple and can be reused after regeneration. Applications 1.Production of sodium hypochlorite via electrolysis in the chlorate and chlor-alkali industries In the production of chlor-alkali, pure saturated salt water is used as electrolytic solution, titanium electrode is used as anode, and asbestos wool attached to iron mesh is used as cathode. The anode chamber produces chlorine gas, and the cathode chamber produces hydrogen gas and sodium hydroxide. After purification, it is widely used in various industries. in industrial production. 2. Electrolyzed functional water Water that has been artificially treated to achieve a variety of beneficial purposes is referred to as functional water. With its high practicability, good sterilization effect, and lack of secondary pollution, electrolyzed water is a well-liked sterilization treatment technique. Titanium electrodes, which are frequently used in electrolyzed water machines, are used to electrolyze drinking water or trace salt water in order to generate functional water. 3. Cathodic protection In the ocean, ship hull, bridge and other steel use environments, due to the corrosion of impurities in the steel and micro-batteries, coupled with the complex natural environment, although corrosion-resistant alloy steel is selected and the thickness of the material is increased to coat excellent corrosion-resistant paint, these The corrosion of structures is still very serious, which poses a great threat to safe production, and cathodic protection is a convenient and important measure to effectively protect permanent steel structures in the ocean.
The raw material of the porous titanium plate for hydrogen production by PEM water electrolysis is pure titanium powder, which is formed by pressing the mold and sintered at high temperature in vacuum. Hydrogen production by water electrolysis is a new energy pillar sunrise industry. The micropore diameter of the porous titanium plate is used to fully react with the medium to produce hydrogen energy. The surface is coated to prevent oxidation and increase the efficiency of hydrogen production. Porous titanium plates are widely used in hydrogen energy, petrochemical, and pharmaceutical filtration, with obvious advantages, and are indispensable products. Product Parameters Filtration accuracy: 0.5um-50um Porosity: 30-40% Permeability: 3-800m3/m2hkPa Compressive strength: 2-3Mpa Temperature resistance: 300 Maximum working pressure difference: 0.6Mpa Features 1. Strong temperature resistance, typical application at temperatures below 300 C;High filtration precision, stable pores, can effectively remove suspended solids and particles, etc., and the purification effect is good; 2. Good air permeability and low pressure loss. High porosity, uniform pore size, low initial resistance; 3. Easy to blow back, can be regenerated online, easy to clean, strong regeneration ability, long service life; 4. High mechanical strength, good rigidity, good plasticity, no need for additional skeleton support protection, easy to install and use; 5. Easy maintenance, good assembly, can be welded, bonded and machined; 6. Uniform pores, especially suitable for occasions requiring high uniformity such as fluid distribution and homogenization treatment; 7. Good corrosion resistance, can be used in nitric acid, sulfuric acid, acetic acid, oxalic acid, phosphoric acid, 5% hydrochloric acid, molten sodium. Stable use in liquid hydrogen, liquid nitrogen, hydrogen sulfide, acetylene, water vapor, hydrogen, carbon dioxide gas and other environments. Applications The porous titanium plate is used as the GDL (gas diffusion layer) of the anode for hydrogen production by water electrolysis in PEM water electrolysis. The pores are uniform and the porosity can be controlled at 30%-40%. Good electrical conductivity and strong corrosion resistance. It can be coated with platinum group metals to enhance its catalytic performance. The cost is relatively high, but the hydrogen production efficiency is high and the purity is high, which is suitable for industrial hydrogen production. Every kind of filter material will be blocked, so it is very important to choose the pore size. If you choose the right pore size, you will have a good filtration efficiency, and the blocking situation will be alleviated. If the blockage is serious, regular replacement can solve this problem.
Pure titanium ingots and alloy ingots are both found in titanium ingots, which are made by melting and casting mostly titanium sponge. Due to their uniform composition, consistent quality, and availability of large-sized ingots, large-sized pure titanium ingots, which are generated using electron beam melting, in particular, significantly contribute to advances in product quality and productivity. Titanium ingot can be used in consumer goods, medical implants, artificial bones, ship hulls, bridges, chemical equipment parts (reactors, pipelines, heat exchangers, and valves, among other things), aviation engines and parts, and chemical equipment. Product information Titanium and titanium alloy ingot is the product name. Size: 380mm-960mm (15"-37.8") in diameter, 2000mm-3000mm in length (78.7"-118") Material: Grades 1, 2, 4, 5, 7, 9, and 12 Standard: AMS 4928Q, ASME B348, ASTM F136, and ASTM F67 Surface: Purity when polished: 99.95% 99.999% Point of melting: 1660 C Application of a product 1. The aerospace sector Aircraft Motor components Planetary rockets 2. The use of electric power and seawater desalination Nuclear and thermal power plants Plants that desalinate seawater 3. The chemical sector Chemical factories (pipes, heat exchangers, valves, etc.) 4.Fourth-generation engineering Ships, bridges, and equipment used on ocean platforms 5.Construction Roofing Draped walls Monumental places 6.Industry of motorcycles and automobiles Motor components Motorcycles 7. Implants for medical care Synthetic bones Welfare goods 8. Sporting equipment and everyday essentials Golf tees Sporting goods Eyeglasses Cameras Wristwatches
Porous titanium foam sintered plate is also called metal powder sintered porous microporous filter material. It is a new type of deep separation and fine filter element made of spherical or irregular metal or alloy powder, which is mixed, pressed and sintered by powder metallurgy. Porous titanium foam sintered plate is a versatile and effective material in the field of heat transfer and heat dissipation. Its high thermal conductivity, resistance to corrosion and oxidation, low weight, and high strength make it a popular choice for a wide range of applications across various industries. Product parameters Name: Porous titanium foam sintered plate Brand: TOPTITECH Filtration accuracy: 0.2um-100um Applicable temperature: 300â?? Size: Customized Product features 1. The material has different pore sizes and filtration precision, the channels are criss-crossed, and the filtration and separation efficiency is high. 2. High temperature resistance and short heat resistance. Suitable for use in the temperature range of 300�°C. 3. Anti-corrosion. It is suitable for deep separation and fine filtration of corrosive media such as acid and alkali. 4. Has certain metal or alloy properties. Energy absorption, noise reduction, heat resistance, shock resistance, cushioning, heat conduction, electrical conduction, high strength and good toughness. Suitable for high pressure environment. Weldable and simple machining, easy loading and unloading. 5. Stable pore shape and uniform distribution ensure stable filtration performance. The regeneration performance is good, and the filtration performance recovers more than 90% after regeneration. Application range Petroleum, chemical industry, metallurgy, aviation, electronics, electric power, pharmaceuticals, environmental protection, atomic energy, nuclear industry, natural gas, refractory materials, fire-combat equipment, etc. Such as: seawater desalination, sewage treatment, transformer oil, lubricating oil, fuel oil and other oils, organic solutions, inorganic solutions, medicinal liquids, beverages and other liquids; coarse and fine filtration; various gases, steam dust removal, sterilization, removal of oil mist ; Noise reduction, flame retardant, heat resistance, catalytic reaction, catalyst filtration, gas buffer, sweating and cooling, porous electrode, antifreeze device manufacturing, etc. Package and Shipment 1.� Titanium Plate Sintered Filters� are usually packed in cartons, wrapped in soft film,� fixed in the box filled with industrial foam cotton, and the outer baler is packed with plastic� bags no damage during� transportation. 2. Wooden box export packaging can also be customized. The foam cotton can be filled and fixed, the external box is sealed, the bottom is specified, and the whole packaging is processed, and the goods can be delivered to the designated place of the customer without damage.
The microporous titanium powder sintered corrugated plate is made of titanium powder after forming and sintering at high temperature, so the surface particles are not easy to fall off; the service temperature in the air can reach 300C; it is suitable for filtering various corrosive media, such as weak hydrochloric acid , sulfuric acid, hydroxide, seawater, aqua regia and chloride solutions such as iron, copper and sodium. Product parameters Product name: Microporous titanium powder sintered corrugated plate Brand: TOPTITECH Porosity: 35-45% Penetrability: 3-800M³/M²hKPa Working pressure: 2.5Mpa Operating temperature: 300C Shape: Round disc, sheet, tube, round bar, cap customizable Specifications: 200mm*150mm*1.0mm (customizable) Filtration accuracy: 0.5 m 0.5um-70um Groove depth: 0.4mm Product Usage 1. Used for matching with stainless steel or titanium filter 2. Orifice plate material for gas distribution fluidized bed 3. Filtration, washing and drying of materials in the pharmaceutical industry 4. Precise filtration of various hydraulic oils and lubricating oils in the machinery industry 5. Filtration of high-temperature corrosive wastewater in the petrochemical industry 6. Recovery of catalyst in catalyst filter 7. High temperature protection facilities on textile instruments and equipment 8. The electrolysis electrode on the hydrogen production device. Product advantages Because the microporous titanium powder sintered corrugated plate has overall heating, no heating inertia, and selective heating, the temperature of the material surface, interior and central area is balanced, the crystal particles are evenly heated, the temperature difference between each part is small, the overall internal structure of the material is relatively complete, and the performance is better. excellent. The main features are as follows: 1. Strong plasticity. 2. Uniform pore size distribution. 3. Long service life. 4. Strong corrosion resistance. 5. High-temperature resistance. Production Process The microporous titanium powder sintered corrugated plate is made by adding high-purity powder into the rolling mill and rolling under pressure. After being rolled and formed by the rolling mill, it is sintered at high temperature in a vacuum sintering furnace.
Titanium
Titanium Grade 1, Grade 2 Titanium Flanges, Slipon, Blind, Weldneck, Rtj, Spectacle Flange, Tongue Groove Etc. All Types of Titanium Flanges, Also Customised
Titanium scrap , Titanium heat exchanger. Moq : 1 ton
Titanium amount of 60 mt, Origin: USSR
Sheet and Plates Specifications 1)hot and coll rolled, Gr1~Gr23 2)Thickness:0.3mm - 60mm 3)Length:6000mm 4)ASTM B265,ASTM 4911,F67,F136 Material :titanium and titanium alloys Pure Titanium Grade : GR1, GR2, GR3, GR4 Titanium Alloy Grade : GR5 (6% Al, 4%V) GR6 (5% AL, 2.5%Sn) Gr.7 (Titanium + Pd) Gr.9 (3% Al, 2.5%V) Gr.10 (11.5%Mo, 6% Zr, 4.5% Sn) Gr.11 (Titanium + Pd) Gr.12 (0.3% Mo, 0.8% Ni)
Specifications : Titanium round bar Grade: Gr1, Gr2, Gr3, Gr5, Gr7 Standard: ASTM B348, ASTM F136, ASTM F67, AMS 4928 Specification: 1. Grade : Gr1, Gr2, Gr4 ,Gr5,Ti-6AL4V ELI,Gr.7, Gr.9, Gr.12 2. Standard : ASTM B348, ASTM F136, ASTM F67, AMS 4928 3. Size: Diameter : 4mm to 350mm, Length: 50mm to 6000mm 4. Payment : T/T or L/C at sight 5. MOQ : 10 kg 6. Package : Ply wooden case or as request 7. Delivery time : 7- 30 days after confirmed 8. Applications: industry, glasses so on.
titanium price per ton titanium bar/sheet/tube/ring/disk Grade: Gr1,Gr2,Gr5(6Al4V),Gr7,Gr9,Gr11,Gr12,Gr23 etc. Standard: ASTM B348, B861,SB338,B265 Features: Titanium has the characteristics of high-strength, heat high strength,corrosion resistance, low thermal conductivity, modulus of elasticity. Applications: Petroleum, powder industry, desalination of sea water, alkali industry, coking industry Shape : bar,tube,sheet,wire,stardard parts,drawing machined parts etc kinds of titanium products
Ti Titanium 99.6% V Vanadium 0.00% A1 Aluminum 0.00% Fe iron 0.40% 2kgs plates
Material: Grade1, Grade 2, Grade 3, Grade 4, Grade 5, Ti-6Al-4V Eli , Ti6Al7Nb etc. Deliver condition & available size: Centraless ground bar: size 2.0mm-45.0mm length: í¦1000mm Peeled bar: size: 8.0mm--45.0mm length: í¦3000mm Mechanical turned bar: size: 45.0mm--250.00mm length: í¦1000mm Size tolerance: H11 or customer's technical request Roundness: not more than 1/2 size tolerance Standard: As per ASTM B348, ASME SB348, AMS 4911, AMS 4928,AMS 4963A,AMS 4967, ASTM F67, ASTM 136, ASTM F1295, ASTM B381, ISO 5832-2, ISO 5832-3, ISO 5832-11 Standard packing
TOPTITECH's 0.25mm Titanium Sheet enables seamless and efficient transport of reactants within the electrolysis cell. By acting as a PTL, it facilitates the smooth flow of water to the catalyst layers, ensuring effective electron conduction and removing generated oxygen gas. This promotes enhanced utilization of the catalyst layers, resulting in improved overall electrolysis efficiency and hydrogen production. Specifications Material: GR1 titanium powder Pore size/Filtration grade: 20um Size:100x100mm Thickness: 0.25mm Porosity: 40%-50% Technique: Sintering Features Enhanced Catalyst Layer Utilization Excellent Transport Properties Precise Thickness and Durability Seamless Integration and Compatibility Sustainable and Eco-Friendly The role of 0.25mm Titanium Sheet as PTL The 0.25mm Titanium Sheet plays a critical role as a Porous Transport Layer (PTL) within water electrolyzers, unlocking enhanced performance and efficiency in the electrolysis process. Efficient Reactant Transport Enhanced Gas Removal Effective Electron Conduction Structural Support and Stability Scalability and Compatibility
