The SIM7000E is Tri-Band LTE-FDD and Dual-Band GPRS/EDGE module solution in a SMT type which supports LTE CAT-M1(eMTC) and NB-IoT up to 375kbps data transfer. It has strong extension capability with rich interfaces including UART, USB2.0, GPIO etc. The module provides much flexibility and ease of integration for customer's application. The package of SIM7000E is compatible with SIM900 and SIM800F. AT commands of SIM7000E are mostly compatible with SIM800F. This also maximizes the investments of customers, and enables a short time-to-market. It is designed for applications that need low latency, medium throughput data communication in a variety of radio propagation conditions. Due to the unique combination of performance, security and flexibility, this module is ideally suited for M2M applications, such as metering, telematics, asset tracking, remote monitoring ,E-health , mobile pos terminals and sharing bike. General features - Tri-Band FDD-LTE B3/B8/B20 - GPRS/EDGE 900/1800Mhz - Output power - GSM900: 2W - DCS1800: 1W - Control Via AT Commands - Supply voltage range: 3.0V~ 4.3V, Typ: 3.8V - Operation temperature: -40 to +85 - Dimensions: 24 X 24 X 2.6mm - Weight: 3.0g - GNSS (GPS,GLONASS and BeiDou/Compass, Galileo, QZSS) Specifications for Data transfer - LTE CAT-M1(eMTC) - Uplink up to 375kbps, Downlink up to 300kbps - NB-IoT - Uplink up to 66kbps, Downlink up to 34kbps - EDGE Class - Uplink up to 236.8Kbps, Downlink up to 236.8Kbps - GPRS - Uplink up to 85.6Kbps, Downlink up to 85.6Kbps Other features - USB Driver for Microsoft Windows XP/Vista/7/8 - USB Driver for Windows CE/Mobile - USB Driver for Linux/Android - Firmware update via USB - TCP/IP - PPP - SMS - EMAIL - FTP/HTTP/SSL - VoLTE* - FOTA* Interfaces - USB2.0 x1 (high-speed) - UART x2 (7-wire UART and 2-wire UART interface multiplex from GPIO) - SIM card x1 (1.8V and 3V) - I2C x1 - GPIO x5 - ADC x1 Consumption - Power off: 7uA - PSM: 9uA - Sleep: 1mA - Idle: 11mA
This mobile phone detection system consists of two sensor poles (Dipole). Each pole has six equally spaced sensors connected to a micro-controller. Detected data are spontaneously wireless transmitted to a Main Controller. Data are further analyzed by the main controller to determine if a mobile phone has passed through these Dipole. When a person walk through the Dipole with a mobile phone, signal strength (above the background noise level) of each detector is displayed on Main Controller's LED panel instantaneously with respect to its position. In the mean time, main controller will sound alarm, active dry contact, or establish wireless or TCP/IP communication with a remote computer depends on customer's preference. Dipole is very lightweight and easy to set up. Since it is a reactive system, dipole does not generate any harmful strong RF driver signal. Dipole and the main Controller consume very low power suitable for non-stop operation. System does not need any operator to monitor like a metal detector. Moreover, Upgraded Idle Standby Phone Walk Through Detector RFD-10PL (TCP/IP Plus) can work with one or multiple IP cameras for remote monitoring and warning. When someone with a phone walks through RFD-10PL cell phone door detector, you will get sound and image alerts quickly. A photo capture pops up to show you who has a phone on our software interface. IP camera's address and time stamp also on the photo. Only the detected photos are stored in the recorded files so you can efficiently find out who have phones without replaying all recorded videos of the IP cameras.
This mobile phone detection system consists of two sensor poles (Dipole). Each pole has six equally spaced sensors connected to a micro-controller. Detected data are spontaneously wireless transmitted to a Main Controller. Data are further analyzed by the main controller to determine if a mobile phone has passed through these Dipole. When a person walk through the Dipole with a mobile phone, signal strength (above the background noise level) of each detector is displayed on Main Controller's LED panel instantaneously with respect to its position. In the mean time, main controller will sound alarm, active dry contact, or establish wireless or TCP/IP communication with a remote computer depends on customer's preference. Dipole is very lightweight and easy to set up. Since it is a reactive system, dipole does not generate any harmful strong RF driver signal. Dipole and the main Controller consume very low power suitable for non-stop operation. System does not need any operator to monitor like a metal detector. Moreover, Upgraded Idle Standby Phone Walk Through Detector RFD-10PL (TCP/IP Plus) can work with one or multiple IP cameras for remote monitoring and warning. When someone with a phone walks through RFD-10PL cell phone door detector, you will get sound and image alerts quickly. A photo capture pops up to show you who has a phone on our software interface. IP camera's address and time stamp also on the photo. Only the detected photos are stored in the recorded files so you can efficiently find out who have phones without replaying all recorded videos of the IP cameras.
Electrical Frequency Range 698-960/1710-2700MHz Band width 266/990MHz Gain 3dBi V.S.W.R 2.5 Radiation Omni-Direction Polarization Vertical Maximum Input Power 50W Impedance 50 Connector SMA Male Cable Type RG58U Cable Length 3M Antenna Radome Material ABS Mount way Screw Mechanical Dimensions 48x82mm Weight 160g Operating Temperature -40 to+70
Model noï¼?S281 The Lora Gateway S281 is the latest Lora technology for industrial internet of things solutions. It supports upto 99 wireless temperature humidity modules, and 99 wireless serial port modules with a monitoring radius of upto 2500m.it is widely used in agricultural greenhouse temperature and humidity collection and monitoring, chemical plant temperature and humidity collection and monitoring, electroplating plant temperature and humidity collection and monitoring, hospital sites and fruit and vegetable storage warehouses and other places temperature and humidity collection and monitoring. Supports SMS,GPRS,3G, 4G Lte Cellular Networks.Compatible Modbus TCP and MQTT IoT Protocols and can intergrate to the KPIIOT IoT Cloud Platform and OPC, SCADA and MES systems to build an industiral IoT Solution.
Model no S266 The S266 GSM GPRS SMS 3G 4G Temperature Monitoring Unit can be used for remote monitoring onsite temperature, once the temperature exceeds the preset value, will send SMS to 10 user numbers to alarm. also, it supports GPRS/3G/4G to transfer data to remote monitoring center,supports modbus tcp,can intergrate to SCADA,KPIIOT Cloud platform directly. Advantages Quad band 850/900/1800/1900Mhz GSM GPRS Module inside; 3G UMTS/HSDPA/4G Modules are optional.; 32 bit MCU, reliable performance with in-built watchdog; Support temperature & humidity monitoring remotely in real-time; Support 8 channel temperature input interface(DS18B20 Temperature sensors); Support 2 relay outputs,7A@125VAC 5A@125VAC 20A@14VDC; High/Low Alert via SMS/Call/GPRS; Supports 1 DNS or IP address as server; Supports Modbus TCP, TCP/IP protocol over GPRS/3G/4G network; Automatically resend the data while communication failure, GPRS failure will alert by SMS text; Supports remotely restart the device, and configure it by SMS commands remotely; Up to 10 user's phone number to receive alarm and daily report SMS/Call; Timer report, interval period 1~65535 seconds, configurable; automatically upload status/Value to the authorized numbers; In-built rechargeable battery, power lost/recover alarm, low maintenance, 247 operation; In-built internal clock, support 11 actions on schedule at pre-set time; Internal 16MB memory, logs more than 200000 records; Wall mount or 35mm standard DIN rail Design, convenient installation, Dimensions 70*88*30mm; Support Android/IOS APP, easily & friendly for use/config. Support remote upgrade the firmware via PC. Can be operated from anywhere, no distance limitation; Secure - Using caller ID and password for identification, unknown callers are ignored;
LCD: 7"/10" 1280*800 CPU: MTK8735 4x Cortex-A53 1.3-1.5GHz OS: Android OS Camera: 2.0MP(Front) + 8.0MP(rear) RAM: 2GB/3GB optional Internal: 16GB/32GB/64GB optional WiFi: 802.11b/g/n Bluetooth: Support 4G LTE: Support Battery: 3.7V, 5000mah Adapter: 5V, 2A Accessory: USB Cable,User manual,Power adapter Certication CE,RoHs,FCC
A9500N is one of the smallest NB-IoT modules in LCC castellation packaging with the compact size of 24.0 Ã?? 26.0 Ã?? 2.3mm, ultra low power consumption and extended temperature range. Designed for use in NB-IoT network, A9500N enables connect to the Internet at DL and UL data speed up to 200kbps. In the area where NB-IoT service are not available, A9500N still enables reliable and secure data connect over EGPRS network. To save space on the application platform, A9500N comes as an extremely slim and compact module. This makes it ideally suited for a broad range of mobile computing devices, and particularly offers easy integration with AMI, Security, Intelligent Buildings and other M2M application. General features * NB-IoT Tri-bandB3/B5/B8 * EGPRS Dual-bandB5/B8 * Control via AT commands(GSM07.05,GSM07.07,V.25TER,GPRS, and enhanced AT commands) * Supply voltage range 3.1V-4.2V * Low Power consumption - eDRX mode:
The SIM7000E is Tri-Band LTE-FDD and Dual-Band GPRS/EDGE module solution in a SMT type which supports LTE CAT-M1(eMTC) and NB-IoT up to 375kbps data transfer. It has strong extension capability with rich interfaces including UART, USB2.0, GPIO etc. The module provides much flexibility and ease of integration for customer's application. The package of SIM7000E is compatible with SIM900 and SIM800F. AT commands of SIM7000E are mostly compatible with SIM800F. This also maximizes the investments of customers, and enables a short time-to-market. It is designed for applications that need low latency, medium throughput data communication in a variety of radio propagation conditions. Due to the unique combination of performance, security and flexibility, this module is ideally suited for M2M applications, such as metering, telematics, asset tracking, remote monitoring ,E-health , mobile pos terminals and sharing bike. General features * Tri-Band FDD-LTE B3/B8/B20 * GPRS/EDGE 900/1800Mhz * Output power - GSM900: 2W - DCS1800: 1W * Control Via AT Commands * Supply voltage range: 3.0V~ 4.3V, Typ: 3.8V * Operation temperature: -40â?? to +85â?? * Dimensions: 24 X 24 X 2.6mm * Weight: 3.0g * GNSS (GPS,GLONASS and BeiDou/Compass, Galileo, QZSS) Specifications for Data transfer * LTE CAT-M1(eMTC) - Uplink up to 375kbps, Downlink up to 300kbps * NB-IoT - Uplink up to 66kbps, Downlink up to 34kbps * EDGE Class - Uplink up to 236.8Kbps, Downlink up to 236.8Kbps * GPRS - Uplink up to 85.6Kbps, Downlink up to 85.6Kbps Other features * USB Driver for Microsoft Windows XP/Vista/7/8 * USB Driver for Windows CE/Mobile * USB Driver for Linux/Android * Firmware update via USB * TCP/IP * PPP * SMS * EMAIL * FTP/HTTP/SSL * VoLTE* * FOTA* Interfaces * USB2.0 x1 (high-speed) * UART x2 (7-wire UART and 2-wire UART interface multiplex from GPIO) * SIM card x1 (1.8V and 3V) * I2C x1 * GPIO x5 * ADC x1 Consumption * Power off: 7uA * PSM: 9uA * Sleep: 1mA * Idle: 11mA
SIM7600X-H-PCIE is a complete multi-band LTE-FDD/LTE TDD/HSPA+/UMTS/EDGE/GPRS/GSM module solution in Mini PCIE type which supports LTE CAT4 up to 150Mbps for downlink and 50Mbps for uplink data transfer.It is combined with a SIM7600X-H (LCC) module and a Mini PCIE adapter board. Target market: EMEA/Korea/Thailand SIM7600E-H-PCIE * Support 4G LTE FDD Band B1/B3/B5/B7/B8/B20 and TDD Band B38/B40/B41 * Support 3G UMTS/HSPA+ B1/B5/B8 * Support 2G GSM/GPRS/EDGE B3/B8 * GSM/GPRS/EDGEB3/B8 General features * Mini PCIE package * Control Via AT Commands * Supply voltage range: 3.0V~ 3.6V, 3.3V Typical * Operation temperature: -40â??to +85â?? * Bandwidth: 1.4/3/5/10/15/20MHz * 3GPP E-UTRA Release 11 * Dimensions: 50.8*31*5.35mm * Weight: 12.6g Specifications for Data transfer * LTE Downlink up to 150Mbps, Uplink up to 50Mbps * HSPA+ Downlink up to 42Mbps, Uplink up to 5.76Mbps * WCDMA Downlink/Uplink up to 384Kbps * EDGE Downlink/Uplink up to 236.8Kbps * GPRS Downlink/Uplink up to 85.6Kbps Other features * USB Driver for Microsoft Windows 2000/XP/Vista/Win7/Win8/Win10 * USB Driver for Linux /Android * RIL supporting for Android 2.4/4.0/5.0/6.0/7.0 * MBIM to Win8 * Firmware update via USB * TCP/IP/IPV4/IPV6/Multi-PDP/FTP/FTPS/HTTP/HTTPS/SMTP/SMTPS/DNS * SSL3.0/TLS1.0/TLS1.2 * DTMF (Sending and Receiving) * Audio Playing * USB Audio and VoLTE * FOTA * eCall* Interfaces * USB2.0 with High speed up to 480Mbps * UART * GPIO * Antenna: Solder pads for Primary, Rx-diversity and GNSS antennas * (U)SIM card (1.8V/3.0V) * Digital Audio through PCM * Analog Audio (Optional) * Embedded SIM card socket (Optional) * GNSS: GPS/GLONASS/Beidou/Galileo*
Language supportï Chinese, English, Russian, use H.264Video compression formatïHisilicon3520DV200 chip Software is powerfulïMDVR chip and camera use Double Circuit Power Supply,The system is more secure and stable 4ch video in use aviation portCVBS video outputï 1ch audio input 1audio outputï1 CVBS output support one SD card slot ïSD max support 256GBï ACC Ignition start and delay shutdownï4 ch switch alarm input(Optional Accessories) PAL and NTSC change Wide power input DC8-36V, adapted to automobile voltage fluctuation platform use cmsv6 ,have mobile APP,4G module use EC20 or EC25
This antenna is designed for LTE/GSM/UMTS/3G/WiFi wireless. * Operating Frequency:700-960/1700-2700 MHz * Antenna Type:Rectangle Patch antenna * Relative Humidity:Double-side tape * Gain:1-3 dBi * VSWR:
Product Description Most of us know that in important places like prisons, military meeting and museums, actions have always been taken to prevent the message from being given out. What kind of device can install in these places to reach the purpose, the Rackmount High Power Cell Phone Signal Jammer must be the one which is most suitable. A big merit of this rockmount high power cell phone signal jammer is that each band can adjust RF power output level or turn off without influencing the other bandsâ?? operation. The original antenna is external double channel directional panel antennas and you can select antennas to provide more flexibility regarding jamming coverage. The jamming coverage of this jammer is so strong that the jamming range could reach 500m, but the jamming range is also determined by the strength of signal in given area. Seen from its function this one jamming device is really a good one. If you are looking for one, come here! High quality and reasonable price is our promise. Specification Affected Frequency Ranges: (8bands option) -CDMA 800: 850 to 894MHz -GSM 900: 925 to 960MHz -GSM 1800: 1805 to 1880MHz (DCS) -GSM 1900: 1920 to 1990MHz (PCS) -3G: 2110 to 2170MHz -4G LTE: (USA:725-770MHz) or (Europe:790-826MHz) -4G Wimax: (USA:2345-2400MHz) or (Europe:2620-2690MHz) -WiFi: 2400-2500MHz -VHF: 136-174MHz -UHF: 400-470MHz OTHER: Customize frequency Total output power:400~800W Jamming range: up to 500m, the jamming radius still depends on the strength signal in given area External double channel directional panel antennas all the TX frequency covered down link only Power supply: 50 to 60Hz, 100 to 240V AC With AC adapter (AC100-240V-DC27V), Dimension: 420480130 mm Accessories High Power Cell Phone Signal Jammer Antennas Power cable Monitor software function: (Option) Remote control switches of each machine. Remote viewing each machine working state. The power output of each machine remote adjustment. Remote viewing offline log of each machine. Mail receiving each machine working state. The system can set permissions to log on.
Product Description This signal jamming device that you are viewing here is the 10 bands Adjustable All GSM CDMA 3G 4G Mobile Phone & WIFI GPS Lojack Jammer which is a powerful signal jamming device and can help people a lot. Firstly, since designed with high power output of 16W so that this high power signal blocker owns up to 50 meters jamming distance depending on the signal strength in the given area. Besides as this high power multi-purpose signal blocker owns 8 antennas so that it can cut off the signals of CDMA/GSM, DCS/PCS, 3G, WiFi, 4G LTE,4G Wimax and WIFI GPS Lojack Jammer at the same time, which is really powerful. whatâ??s more, the adjustable button has also been used on this high power signal blocker so that you can decide the jamming frequency bands and jamming distance according to your real situation. Also the design of the good cooling system for this high power adjustable multi-purpose jammer also makes it easy to achieve the 24/7 continuously working goal. For more details of this high power adjustable multi-purpose jammer just come here to gain the useful information. Specifications Affected Frequency Ranges: - CDMA : 850-894 MHz - GSM : 920-960 MHz - DCS : 1800-1880 MHz - PCS : 1920-1990 MHz - 3G : 2100-2180 MHz - WIFI : 2400-2480 MHz - 4G LTE (US.725-770MHz) or (EU.790-826MHz) - 4G Wimax (US.2345-2400MHz) or (EU.2620-2690MHz) - GPS L1 : 1575.42 Mhz - Lojack : 167-173 Mhz Total output power: 24W Jamming range: up to 50m, the jamming radius still depends on the strength of the signal in given area External Omni-directional antennas all the TX frequency covered down link only Power supply:AC 110250V/12VDC(15A) Dimension:330*238*65mm Weight: 6.0kg
Specification Optional supports mobile network A) lte/wcdma/umts/hspa/hspa+ B) edge/gprs C) cdma2000 evdo/cdma 1x Ethernet standard A) ieee 802.3 B) ieee 802.3u Interface A) 4× 10/100mb lan interface B) 1× 10/100mb wan interface C) 1× rs-232 console port(rj45) D) 2× sma-k antenna interface E) 2× standard sim/r-uim interface F) 1× standard dc power interface Led instruction A) system B) power C) wlan D) wan E) lan (lan1~lan4) Route protocol A) static route B) ripv2/ospf dynamic route Power supply 5~26vdc Device management A) local or remote web browser (ie v8 or above) B) cli/telnet command C) m2m management platform (optional) D) ssh configure (optional) Wi-fi A) standard: ieee 802.11b/g/n B) wep, wpa and wpa2 encryption C) wps key D) ap, client, station, bridge mode support Firewall & filter A) ip packet/domain/mac filter B) nat C) dmz Vpn A) ipsec B) pptp/l2tp client C) gre/ipip D) openvpn optional A) dimension: 150mm x 102mm x 25.5mm B) weight: 530g C) operation temperature: -30~+70 D) store temperature: -40~+85 E) related humidity: < 95% (non-condensing) F) guarantee: one year
Gsm850: 850-894mhz Gsm1900: 1930-1990mhz 3g: 2100-2170mhz 4g(wimax): 2345-2400mhz 4g (lte): 725-770mhz Total power: 12w Power supply: ac 110-240v / dc 5v Shielding radius: up to 40 meters (signal strength
Sciphone i68 4g sales point: Iphone 4gs appearance hiphone 4 shape Wi-fi: support mmsíówapíógprs wireless internet Compass Dual camera light Dual sim card dual standby Quad band gsm phone: 850/900/1800/1900mhz (it can work any country in all world) 3d acceleration sensors gravity, slide unlocked, let the music off, chick the scroll Slide to turn page Bluetooth a2dp Gravity inducer , auto horizonal screen Handshaking functions (change music by shaking) Language: english, french, italian, portuguese, polish, spanish, deutsch, melaysian, indonisian, cezch, norwegian, dutch, tieng viet, thai, russian, arabic, persian, hebrew, greek, swedish, simplified chinese, traditional chinese 0.5kg /pc
Highlights: site cheapstores1. com With 208Mhz CPU speed, WiFi, Orientation sensor, compass, i68 4G brings you the experience of hi-tech fascination. Thin, simple and humanized design, L x W x H: 114.6 x 62.0 x 11.0mm 3.2 inch TFT LCD with 240 x 320 resolution,Flat Touch screen Supports JAVA2.0 Frequency/Mode: GSM 850/900/1800/1900 MHz New fashion rocking switching function- change music, picture and movies easily Built-in FM stereo radio IEEE 802.11: WiFi Bluetooth 2.0 Dual cameras - 2 MP Pixel high resolution(Real1.3MP), support network cam and Voiced video recording Built-in compass Surf the internet with WAP/GPRS or WiFi Special designed input interface, clicking virtual keypad, the pre-selected word will be enlarged Slide to unlock technology Universal 4C batteries and HiPhone data interface Dual SIM and dual standby Universal Accessories With universal 4C batteries, it's easy to use anywhere. 1 x i68 4G Cellphone 1 x Wired stereo earphones with built-in MIC and clip 2 x Rechargeable Li-ion battery 1 x Power adapter (100-240V 50/60Hz); 1 x Phone to USB cable 1 x User manual - English
Model Number : Card Extender fpc cable Type : FPC Place of Origin: Guangdong, China Brand Name : OEM Service Base Material : Polyimide/polyester Copper Thickness : 1oz / 1/2 o z/ 1/3 oz Board Thickness : 0.07-0.5MM Min. Hole Size : 0.1MM Min. Line Width : 0.04MM Min. Line Spacing: 0.04MM Surface Finishing : HASL / OSP / ENIG / Immersion silver/Tin/Ni Board Size : 400mmX800mm Product name : SIM Card Extender with push slot fpc flat cable Application: Consumer Electronics PI thickness : 25 m / 12.5 m Stiffener material type : PI / FR4 / PET / Steel piece Assembly Service : SMD SMT Outline profile : Punching / Laser cut / Drilled Solder mask color : Yellow. Optional Acceptable file format : CAD/Gerber file/powerpcb/Autocad/Orcad/P-cad/CAM-350/CAM2000 Adhesive : 13m
An LTE Wireless Router. It delivers multi-service user experience, provides the VoIP telephony(Optional), the advanced data services and mobile services in a single box solution. Aiming at SMB/Shop communications scenario, it provides the rich communications interfaces for the kinds of the terminals, including Wifi PoS, ATM machine, Fax machine, IP Phone, IP Camera etc. Besides, the advanced VPN feature protects the network security absolutely. LTE LTE CAT4 LTE FDD Downlink: 150Mbps Uplink: 50Mbps LTE TDD Downlink: 130Mbps Uplink: 30Mbps LTE Bands Combo Q1: LTE Band 1/3/7/8/20/38/40/41; 3G Band 1/2/5/8 Q2: LTE Band 1/2/4/7/12/38/40/41; 3G Band 1/2/5/8 Q3: LTE Band 1/2/4/7/28/40; 3G Band 1/2/4/8 Q4: LTE Band 3/7/20/42/43 *The bands could be designed according to the operator bands Data Network Ethernet Port: 4x10/100Mbps Ethernet Port LAN Or 1x10/100Mbps Ethernet Port WAN+3x10/100Mbps Ethernet Port LAN Static IP address, PPPoE, DHCP PnP: Auto detection-line,upgrade QoS: Destination/Source MAC/IP, Application, DSCP Advanced Routing: Static Route, Policy Route, DNS Proxy, Port Forwarding/Triggering Internal Address Management: DHCP Server, IP and MAC Address Bind, DHCP Relay Networking Protocols: TCP/IP(IPv4/v6), UDP, RTP, SNTP, NAT, DHCP, DNS, DDNS . LTE Features: Switch Frequency Band, Multi -APN, Lock/Switch PLMN, Lock Sim Card, SMS VPN: IPSec, PPTP, L2TP, EOIP Management Protocol: CLI, SNMPV1/2, TR069, WebStatic Firewall & Security: IDS&IPS, Block Ping/ICMP/IDENT, IP and MAC Address Bind, SPI Firewall, Port scan restriction WIFI Features IEEE 802.11b/g/n (2.4Ghz) Security: WEP, WPA, WPA2, WPA-PSK, WPA2-PSK WIFI Features:WMM, WLAN-LAN Isolation, Multi SSID(X4), AP Isolation Antenna Type: 2R2T WiFi b/g/n Wifi Speed: WIFI N 300Mbps Voice Features (Optional) 2*FXS Port· G.711Alaw, G711mulaw, G.723, G.729 SIP· T.30/T.38 fax Billing mode: Reverse Polarity Voice Functions: Caller detection and Caller ID; Call waiting, Call transfer, Call forward, abbreviation dial, 3-Way Conference, Do-Not-Disturb Environment Dimension: 190 x 125 x 30mm Net Weight 600 g Power Supply: 12V/1A Operation Range: 0 to 40C, 32to 113F Humidity:10-90% non-condensing
