This mobile phone detection system consists of two sensor poles (Dipole). Each pole has six equally spaced sensors connected to a micro-controller.
Detected data are spontaneously wireless transmitted to a Main Controller. Data are further analyzed by the main controller to determine if a mobile phone has passed through these Dipole.
When a person walk through the Dipole with a mobile phone, signal strength (above the background noise level) of each detector is displayed on Main Controller's LED panel instantaneously with respect to its position.
In the mean time, main controller will sound alarm, active dry contact, or establish wireless or TCP/IP communication with a remote computer depends on customer's preference.
Dipole is very lightweight and easy to set up. Since it is a reactive system, dipole does not generate any harmful strong RF driver signal.
Dipole and the main Controller consume very low power suitable for non-stop operation.
System does not need any operator to monitor like a metal detector.
Moreover, Upgraded Idle Standby Phone Walk Through Detector RFD-10PL (TCP/IP Plus) can work with one or multiple IP cameras for remote monitoring and warning.
When someone with a phone walks through RFD-10PL cell phone door detector, you will get sound and image alerts quickly. A photo capture pops up to show you who has a phone on our software interface. IP camera's address and time stamp also on the photo. Only the detected photos are stored in the recorded files so you can efficiently find out who have phones without replaying all recorded videos of the IP cameras.
This mobile phone detection system consists of two sensor poles (Dipole). Each pole has six equally spaced sensors connected to a micro-controller. Detected data are spontaneously wireless transmitted to a Main Controller. Data are further analyzed by the main controller to determine if a mobile phone has passed through these Dipole. When a person walk through the Dipole with a mobile phone, signal strength (above the background noise level) of each detector is displayed on Main Controller's LED panel instantaneously with respect to its position. In the mean time, main controller will sound alarm, active dry contact, or establish wireless or TCP/IP communication with a remote computer depends on customer's preference. Dipole is very lightweight and easy to set up. Since it is a reactive system, dipole does not generate any harmful strong RF driver signal. Dipole and the main Controller consume very low power suitable for non-stop operation. System does not need any operator to monitor like a metal detector. Moreover, Upgraded Idle Standby Phone Walk Through Detector RFD-10PL (TCP/IP Plus) can work with one or multiple IP cameras for remote monitoring and warning. When someone with a phone walks through RFD-10PL cell phone door detector, you will get sound and image alerts quickly. A photo capture pops up to show you who has a phone on our software interface. IP camera's address and time stamp also on the photo. Only the detected photos are stored in the recorded files so you can efficiently find out who have phones without replaying all recorded videos of the IP cameras.
Features 1.simple and generous appearance,reasonable price,simple operation, the most economical product. 2.overall detection,from head to toe,uniform and stable without blind area.Precision detection of guns,control tools.Make with advanced synthetic materials,fire-proof and moisture-proof. 3.according to the international standards of electromagnetic radiation,the use of weak magnetic field technology,the pacemaker wearers,pregnant women,floppy,film,videotape,etc.harmless. 4.the integrated design can be installed or dismantled in only 20 minutes,with installation and adjustment operation manual. 5.using digital,analog and leftright balance technology to prevent false alarm,greatly improve the antiinterference ability,intelligent alarm counting function,can automatically statistics personnel through number and number of alarm times. Applications Airports Banks Commercial buildings Courthouses Embassies Government buildings Military installations Prisons Ships Security checkpoints Post office Technical parameter specification Channel size:2000*700*400mm Dimension:2220*800*400mm Power supply:220V/AC Working temperature:20°45° Power:60 person countminutes meet a criterion G 8152102003 (general technical specifications through metal detection) national standards
Features 1. Exclusive global shockproof design, standing in the middle of the door, hand shot on both sides of the door, the door will not be false positives. The use of advanced synthetic materials manufacturing process, fire-proof, moisture-proof. Can set multiple sets of operating frequency, so that multiple devices side by side adjacent work, do not interfere with each other. 2. Products are divided into six zones, suspicious objects can be accurately displayed in each area. High-brightness digital display panel, sound and light at the same time alarm, automatic statistics through the number of people and the number of alarm, take 100 people mark 100 people, not more than or less. Two rows of LED post lamp, you can visually display the alarm location, sound and light alarm at the same time. 3. Precise detection of the size of the paper clip metal, will not be missed and reported. Can also rule out the impact of belt buckle, shoes, bra, etc., to detect more than 150 grams of copper, aluminum, zinc and other metal or control tools and guns. Sensitivity can be adjusted according to need, a total of one hundred sensitivity. 4. Optional remote control parameters can be controlled. Parameters can be password protected, so that unauthorized personnel can not operate. Reserved communication interface, can be connected with the computer, camera, three rollers. 5. In line with international standards, the heart pacemaker wearer, pregnant women, magnetic media and other harmless Applicable to bus stations, railway stations, large-scale performances, activities, exhibitions and other security checks and prohibited items inspection areas. With the integrated design, only 20 minutes to install or disassemble is completed, equipped with a random installation and commissioning instructions. 6. For a variety of use of the environment of electromagnetic interference, the entire system uses the world's most advanced electromagnetic compatibility design, and the use of DSP processor for prohibited items of sampling signals related to the operation and filtering, making the whole set of equipment has a strong electromagnetic interference ability. Applications Airports Banks Commercial buildings Courthouses Embassies Government buildings Military installations Prisons Ships Security checkpoints Post office Technical parameter specification Channel size: 2000mm (high) 700mm (width) 500mm (deep) Dimensions: 2220mm (high) 800mm (width) 500mm (deep) Power: AC215V ~ 230V 50HZ ~ 60HZ Working temperature: -20 ~ +55 Power: 60 person / min Meet the standard: GB15210-2003 "through the metal detection gate general technical specifications" national standard
Features 1. Exclusive global shockproof design, standing in the middle of the door, hand shot on both sides of the door, the door will not be false positives. The use of advanced synthetic materials manufacturing process, fire-proof, moisture-proof. Can set multiple sets of operating frequency, so that multiple devices side by side adjacent work, do not interfere with each other. 2. Products are divided into six zones, suspicious objects can be accurately displayed in each area. High-brightness digital display panel, sound and light at the same time alarm, automatic statistics through the number of people and the number of alarm, take 100 people mark 100 people, not more than or less. Two rows of LED post lamp, you can visually display the alarm location, sound and light alarm at the same time. 3. Precise detection of the size of the paper clip metal, will not be missed and reported. Can also rule out the impact of belt buckle, shoes, bra, etc., to detect more than 150 grams of copper, aluminum, zinc and other metal or control tools and guns. Sensitivity can be adjusted according to need, a total of one hundred sensitivity. 4. Optional remote control parameters can be controlled. Parameters can be password protected, so that unauthorized personnel can not operate. Reserved communication interface, can be connected with the computer, camera, three rollers. 5. In line with international standards, the heart pacemaker wearer, pregnant women, magnetic media and other harmless Applicable to bus stations, railway stations, large-scale performances, activities, exhibitions and other security checks and prohibited items inspection areas. With the integrated design, only 20 minutes to install or disassemble is completed, equipped with a random installation and commissioning instructions. 6. For a variety of use of the environment of electromagnetic interference, the entire system uses the world's most advanced electromagnetic compatibility design, and the use of DSP processor for prohibited items of sampling signals related to the operation and filtering, making the whole set of equipment has a strong electromagnetic interference ability. Applications Airports Banks Commercial buildings Courthouses Embassies Government buildings Military installations Prisons Ships Security checkpoints Post office Technical parameter specification Channel size: 2000mm (high) 700mm (width) 500mm (deep) Dimensions: 2220mm (high) 800mm (width) 500mm (deep) Power: AC215V ~ 230V 50HZ ~ 60HZ Working temperature: -20 ~ +55 Power: 60 person / min Meet the standard: GB15210-2003 "through the metal detection gate general technical specifications" national standard
Features 1.multi-zone technology: 33 detection zone, the detection zone sensitivity can be adjusted (with adaptive regulation technology) 2.touch screen technology: 7-inch HDMI touch LCD screen, the operation is more simple and easy to understand. 3.mobile Internet technology: mobile phone APP remote control, the world's zero distance (optional). 4.super shell protection technology: IP54 superior protection performance (optional). 5.adaptive diagnostic system: boot adaptive power system diagnosis. 6.adaptive debugging system: the system into the debugging system adaptive debugging probing standards. 7.Start and stop technology: Infrared device with automatic start and stop technology. 8.alarm function: alarm lights, alarm sound, any adjustment settings. 9.working frequency: working frequency can realize manual or automatic frequency conversion. 10.Detection Technology: unimaginable uniform detection technology, no blind spots. 10.professional detection procedures: the system built 72 different occasions to detect standard procedures (to provide upgrade services) 11.work band: a large range of 100 working frequency band. 12.security level: with 100 security levels 13.detection zone sensitivity: a single zone sensitivity up to 0-255 level. 14.alarm sound mode: the system has a variety of alarm sounds selectable mode, to adapt to different occasions to choose. 15.Statistics: PASS through the system and return to the dual data records, but also have the FAIL through and return double data records. 16.Query function: The system has real-time information inquiry function. 17.Intelligent standby: the system has intelligent standby reminder function. 18.work stand-by tips: Security door normal working hours with a full range of 16 high-brightness LED standby indicator. 19.detection capacity: 1 minute with more than 60-150 people passed the test. Applications Airports Banks Commercial buildings Courthouses Embassies Government buildings Military installations Prisons Ships Security checkpoints Post office Technical parameter specification Model BG-6500T External dimensions 2240Ã?670x850mm Vertical channel size 2000x700mm Packing size 2280x700x290mm NW 67KG GW 75KG Working voltage AC90V~240V 50/60Hz Power 20W Working frequency 1-100 Working environment -20~65 Installation environment (W) 100cm* (L) 200cm (no metal in this range) Each zone sensitivity 0-255 Level Maximum sensitivity 6g metal
we are engaged in offering a wide array of Walk-Through Metal Detector. The range is mostly applicable in the shopping complex; malls and bank for detecting any types of suspected person and metal. At vendors end, this offered range is designed for using best quality material and cutting-edge technology. Clients can avail entire range from us at market leading prices.
1.Six overlapping detection region of the same height of human body. 2.With LED alarm light on columns displaying the accurate position of the targets. 3.Four corresponding infrared transmitters and receivers,no blind area. 4.Sensitivity of every area can be adjusted independently from 0-99,without the interference of scheduled metals. 5.Microprocessor digital control technology,strong anti interference ability. 6.The function of statistics:the number of passengers and alarms can be count. 7.It can be used independently or work together with the same mod(minimum spacing can be up to 40cm),to meet the requirements of the personnel large flow. 8.Password protection function:only the authorized person can operate it. 9.No harm to people, film and magnetic recording materials. 10.Installed conveniently:just put self-made four corner screws fixed door,plug in 220V power supply can be put into use
Function and characteristics 1. Materials and displaying;adoption of fire board materials; the ultra-large Led displaying panel. 2. The led monitor embedded at both the left and right sides of the gate leaf can Accurately indicate the prohibited articles. 3. Wide application scope 4. Six detecting areas. 5. Sensibility 100rang adjustable . 6. High capability of anti-interferenceú¼high stability. 7. Protection with password setted.. 8. Functions of statistic counting. 9. Harmless to human body: the product is harmless to all of the thing such as heart pacemaker installed in human body, pregnant women, magnetic floppy, recording tapes, etc. 10.Convenience in installation: our products adopt integration design. It only takes twenty minutes to install the gate or take it apart. 11. (1) power supply: 110v or 220v 60/50hz (2) actual power dissipation: < 35va 3) signal frequency: 6khzí½9khz adjustable (4) ambient temperature: -20íµí½45íµ (5) relative humidity: < 100% no condensation 12.Work environment:-20degree-----45degree. 13.Component: (1) main control (2) top cover (3) al strip (4) panels (5) ir 6) stabilizer base (7) outlets (8) led zone lights 14. Product external dimensions: 2220 mm*820 mm*500 mm Product passage dimensions: 2000 mm*700 mm*500 mm Packaging dimensions consist two parts: Detecting board 2250 mm*590 mm*210 mm (50 kg) Host machine 760 mm*450 mm*280 mm (14 kg) Packed weight: about 90kg
JH series walk through metal detector is a CE approved concealed weapons detector. This walk-through metal detector which uses advanced magnetic technology to accurately pinpoint the location, size, and number of concealed weapons, such as knives and guns. Personal artifacts such as coins, keys or belt buckles will not set off the alarm. The walk-through metal detectors a true multi-zone metal detector with new advanced features. It offers superior performance for demanding high security applications.
