Silicon Pressure Sensor Die Wafer Suppliers and Manufacturers

Scrap solar silicon wafer - mono / multi.

Silicon wafer.

Silicon wafer, silicon ingot, mono si, single crystal.

Liquid silicone.

We can supply 156 mm Mono and Multi crystalline silicon solar wafers (A grade) with high quality and best price for large quantity.For specifications,price and further information,please freely contact us through email.

Silicon wafer, broken silicon wafers, patterned & non-patterned.

Silicon ingots, wafers.

Silicon wafers, solar wafers, soi wafer, glass wafers, aiiibv compound and epitaxy-based compound wafers, thin film coated wafers, sputtering targets, chrome photo mask blanks.

Poly silicon, silicon ingot, silicon wafers, solar wafers.

Application: CNG, LPG, LNG, AIR Body Material: Aluminium Pressure (absolute): 0~400kPa Accuracy:1% for pres. & temp. Thermal compensation:Yes Pressure response time: 1ms Temperature sensor:NTC 10KΩ (B25/50=3950) Temperature response time:2s Working Temp: -40~120 Socket Thread: M12x1.25 (defalt), M12x1 Connector type: C4 Mate Connector: AMP 1-967640-1 Burst Pressure:1600kPa Protection: IP67

TRH-P-201 compact pressure sensor / transmitter 1: It adopts all-stainless steel sealing structure, which has good moisture resistance and excellent media compatibility. 2: Using independent research and development amplifier circuit to greatly improve sensor signal output stability 3: The high reaction speed is adopted, so that the sensor can react to the change of the liquid pressure at any time, and the measurement result is more accurate and error-free. Application: Widely used in pressure measurement and control of industrial equipment, water conservancy, air compressor pressure, pump water valve, constant pressure water supply. Range: 0 ~ 0.1 ~ 20 (MPa) Comprehensive accuracy: ±1%, 0.5%, 0.2% Output signal: 0.5V~4.5V 4~20mA 0~5V 0~10V 1~5V 1~10V Supply voltage: +5V DC, 24VDC (9~36V) Medium temperature: -20 ~ 85 ° C Ambient temperature: normal temperature (-20 ~ 85 ° C) Load resistance: Current output type: maximum 800Ω; voltage output type: greater than 50KΩ Insulation resistance: greater than 2000MΩ (100VDC Sealing level: IP65 Long-term stability: 0.1% FS / year Vibration effect: The output changes less than 0.1% FS within the mechanical vibration frequency of 20Hz~1000Hz. Electrical interface (signal interface): waterproof connector Mechanical connection (threaded interface): 1/2-20UNF, M14�1.5, M20�1.5, M22�1.5, etc. Other threads can be designed according to customer requirements Pressure sensor, pressure transmitter is a high-quality pressure sensor developed by Honghua heng, pressure transmitter Pressure sensor, pressure transmitter price advantage, pressure sensor, pressure transmitter function stable

Gauge pressure sensor with dual in-line package is a small size piezo-resistive pressure sensor. When the input voltage is 3vdc the sensor produces mv dc output voltage which is direct proportion of the input pressure. All the products can be customized according to your requirement. Features Solid-state reliability Low cost Gauge pressure type:0-40kpa; Easy to use Applications Medical instrumentation & monitoring Digital blood pressure meter Environmental monitoring Consumer & sports Pressure type Type Gauge Psg010 Gauge Psg010r Gauge Psg010s Min Typ Max Unit Remarks Excitation voltage 5.0 V Excitation current 1 Ma Span (fs rang) 40kpa 50 65 80 Mv Offset -25 0 +25 Mv Tc span -24 -19 -15.5 %fs/100 celcius Measured at 5v constant voltage excitation. Tc offset -7 +7 %fs/100 celcius Tcr +18 +25 +32 % /100 Linearity -0.45 -0.15 +0.45 %fs Bridge impedance 4.5 5 5.5 K|¸ Proof pressure 2x Fs Burst pressure 4x Fs Operating temperature -20 +80 Celcius Storage temperature , Standard packaging

Product Characteristics: Measuring range 0 ~ 100 kpa... 1600 kpa MEMS technology Gage pressure form PCB or ceramic packaging forms Suitable for non-corrosive gas or liquid Convenient sealing, high performance-price ratio Areas of application: Air conditioners, washing machines, refrigerators and other household appliances Steering, braking, oil level, oil pressure test, and other automotive electronics areas Pumps, fire fighting, diving and water pressure test Water dispensers, coffee machine and other purification equipments Workshop, environmental monitoring, liquid level measurement, etc Product overview: This piezoresistive pressure sensitive component is a type of pressure sensor suitable for pump, automotive electronics, drinking water, etc. its core is a silicon piezoresistive pressure sensitive chip adopting MEMS technology processing. The pressure sensitive chips by a elastic membrane and integrated membrane on the four resistors, four varistor formed the structure of wheatstone bridge, bridge produces a voltage output signal which has a linear proportional relationship with the added pressure when pressure effects on the elastic membrane. This pressure sensitive component is OEM component adopting PCB assembly, can be electrical connected through the welding line or the pin, suitable for the O ring seal. Good linearity, repeatability and stability, high sensitivity, convenient for users' output debugging adopting op-amp or integrated circuit. Including with temperature compensation and without temperature compensation. Pressure on the back way. standard packaging

Application: Sports Watches, Fishing Barometer, 3D Navigation, Outdoor Waterproof Equipment, etc. Sensor Advantages: Waterproof resistant, O-ring seal Industry's first, high precision (1m) Ultra-low power consumption, extreme power saving Ceramic substrate, high temperature resistance, higher stability 24 bits ADC with DSP, direct output of pressure, altitude and temperature values Reflow soldering allowed, enabling efficient placement Parameter: Output Value: Pressure\Altitude\Temperature Pressure Range: 300mbar~1200mbar Pressure Accuracy: +/-1.0mbar Programmable Interrupt: Support Altitude Resolution: 10cm Pressure Resolution: 0.01mbar Temperature Resolution: 0.01 Temperature Range: -40~+85 Temperature Accuracy: +/-1.0 Output Interface: I2 C Supply Voltage: 1.8~3.6V Standby Current: < 0.1|¨¬A Waterproof: O-ring seal Size: 4.5X4.5X3.5mm Certifications: RoHS\ESD\FCC\ETSI\REACH\Reliability Report Hope Microelectronics Company Tel: +86-4001-189-180 Fax: +86-755-82973550 Website: http://www.hoperf.com carton

Model: ghpp6250 Package: sop14 Pressure range: 20kpa - 250kpa Pressure type: absolute pressure Applications: compressed natural gas pressure (cng) / engine control Remark: for more details, pls contact me(sennie) directly. Export cartons

The fuel rail sensor, commonly referred to as the Fuel Pressure Sensor, it is installed at one end of the oil rail to measure the fuel pressure in the common rail pipe. The sensor is a part of vehicles fuel system and designed to monitor the fuel pressure that is present at the fuel rail.It sends this signal to the ECU, which then uses it to make adjustments to the vehicle s fuel and timing. When the sensor has an issue it can cause problems with the performance of the vehicle. Quality Guarantee :1 year, and strictly in accordance with the standard quality inspection The products are 100% new and carefully packed. 1.Name: Fuel Pressure sensor,Fuel high Pressure sensor .1089-0575-26 Pressure Sensor For Atlas Copco Air Compressor Spare Part 1089057526

39875539 Pressure Sensor for Ingersoll Rand Air Compressor Replacement Pressure Transducer 24571309 5VDC.The fuel rail sensor, commonly referred to as the Fuel Pressure Sensor, it is installed at one end of the oil rail to measure the fuel pressure in the common rail pipe. The sensor is a part of vehicles fuel system and designed to monitor the fuel pressure that is present at the fuel rail.It sends this signal to the ECU, which then uses it to make adjustments to the vehicle s fuel and timing. When the sensor has an issue it can cause problems with the performance of the vehicle. Quality Guarantee :1 year, and strictly in accordance with the standard quality inspection The products are 100% new and carefully packed. 1.Name: Fuel Pressure sensor,Fuel high Pressure sensor .

1089057412 1089-0574-12 Air Compressor Temperature Sensor for Atlas Copco.The fuel rail sensor, commonly referred to as the Fuel Pressure Sensor, it is installed at one end of the oil rail to measure the fuel pressure in the common rail pipe. The sensor is a part of vehicles fuel system and designed to monitor the fuel pressure that is present at the fuel rail.It sends this signal to the ECU, which then uses it to make adjustments to the vehicle s fuel and timing. When the sensor has an issue it can cause problems with the performance of the vehicle. Quality Guarantee :1 year, and strictly in accordance with the standard quality inspection The products are 100% new and carefully packed. 1.Name: Fuel Pressure sensor,Fuel high Pressure sensor .