The Slag conditioner offered by us helps in adjusting Slag composition in a way that it interacts in a balanced way with steel, thus helping in maintaining proper equilibrium. Further, it also helps in absorbing inclusions as well as impurities and assists in producing a cleaner as well as better quality steel. Further, the use of the material also helps in lowering melting temperature of slag as well as increasing its fluidity, thus helping in maintaining proper as well as desired slag composition. We also have extensive industry experience in successfully matching up with the demands of Slag Conditioner Material. It features pure constitution and assists in ensuring that there is no harmful reversion of P, S, and unwanted oxides in the Steel making process.
Sintered Calcium Aluminate Sintered Calcium Aluminate ( Sintered Refining Slag) is calcined in the rotary kiln with the high quality raw materials.It�¢??s a good quality refining agent.It is characterized by very strong desulfurization and deoxygenation, low melting point,high melting speed, it can shorten smelting time, reduce the energy consumption,reduce dust pollution in the steel plant,reduce the consumption of the ladle refractory materials,increase the service life of the ladle.
Silicon slag is a by-product of smelting metal silicon and ferrosilicon.It is a kind of scum floating on the furnace in the process of smelting silicon.It is content is from 45% to 70%,and the rest are C,S,P,Al,Fe,Ca. It is much cheaper than purity silicon metal.Instead of ferrosilicon for steelmaking, can reduce the cost. Silicon slag 50 is Si greater than or equal to 50, Ca less than 5, S less than O0.1, P less than 0.05, C less than 5.
Cu+Zn Scrap Quantity: +2 million tons (1.5 million tons Cu + 540k tons Zn) Origin: Mexico Cu Composition: Cu=33%,Fe=25%, Mg=12%, Cr=11.5% Si=6% (and more minerals) Zn Composition= ZnO=40%, SiO2=20%, Al2O3=12%, Fe2O3 = 9%, P2O5 = 6%, CuO= 5% (and more minerals) Form: Rocks
Basicity (CaO + MgO + A12O3)/Si02 = 1.60 min Moisture content (%) = 10.0 Max Magnesium Oxide content (MgO) (%) = 10.0 Max Loss on Ignition (%) = 0.50 Max Size :< 5mm (%) = 90.0 Min Calcium Oxide (CaO) (%) = 36.0 Min Glass content (%) = 95.0 Min
Calcium aluminate advantages: 1) Uniform chemical compositions, low melting point, high melting speed, and short smelting time; 2) It has no fluoride and doesnt erode furnace lining and ladle, and it is compact, non-absorbent,and easy to storage as well; 3) Stable phase and fast dust-reducing speed, rapid desulfurization effect stabilized at 60%, and suppresses phosphorus into molten steel; 4) Improving the protective effect and reducing erosion to ladle lining.
Granulated Blast Furnace Slag
Ground Granulated Blast Furnace Slag
Ground Granulated Blast Furnace Slag
There are two types of Ferro-nickel slags that we have as below. Both products are manufactured in Korea and waiting for your offers. Since details such as Incoterms, payment terms, price, volume are subject to further discussion, please contact me through mail first. 1) Ferro nickel slag (which is generated after refining at furnace) -. Contents : NiO : 4-6% / Sio2 : 20-25% / Cao : 25 -30% / MgO 2% / Fe: 17-22% / Al2O3 : 4-6% -. Application : Nickel source 2) Ferro nickel slag (which is manufactured during slag tapping) -. Contents : Sio2 : 50-55% / MgO : 30-35% / Fe : 6-7% / Al2O3 : 2% CaO : 0.5 / Mn : 0.3 -. Application : Sand-blasting, Molding sand, Abrasive, Aggregate etc.. I appreciate your efforts in advance. Best regards,
Silicon Slag Silicon Metal Slagis a byproduct from the manufacture of silicon metal it is a kind of mixture which contains the main content Silicon 3565 and other components such as C S P Al etc It is a good substitute for FeSi in steel making which has advantage in lowing the cost of production and reusing resource Usually we use silicon slag to produce silicon briquette which is far and wide market in domestic and internationalour silicon metal is used by the chemical industry in the production of silicon compounds and by semiconductors Aluminum manufactures to improve the useful properties of aluminum as well as in the manufacture of silicon wafers used in photovoltaic solar cells and electronic
We supply and export FerroNickel Electrofurnance Slag. Our Slags are registered under REACH regulation. Conditions are FOB Durr�«s Port in Albany. Application: Sandblasting / High density submarine oil and gas pipe coating aggregate / Additional iron to clinker (Substituting the raw material in cement industries with our slag allows deduction of the ton of CO2 that plants would otherwise have accounted in their carbon balance) / Railway ballast / High strength concrete / Beach aggregate / Granular base for road construction. Most common ingredients: Ingredient and Content Classification (CLP) Silicon Dioxide 30 - 50% Iron 15 - 35% Magnesium Oxide 13 20% Aluminium Oxide 1 4% Chromium (III) Oxide 1.4 3% Nickel < 0.15% Sulfur 0.1% Calcium oxide 3 5%
Blast Furnace Slag
The granulated blast-furnace slag is sand-type slag manufactured by spraying high-pressure water jets on a blast-furnace molten slag.
We are the supplier of Processed Copper Slag. Cu - 0.60-0.70, Fe - 55-60, SiO - 26-30, AI 1.0 - 3.0, FeO 1.0 - 2.0, Angular, Sharp Edgues, Multi faced. Kindly send inquiry for more detail for product and price negotiation.
granulated blast furnace slag (a) Ca O: 30 to 38 % (b) Si O2:30to 40 % (c)Al 2O3:15 to22% (d)MgO:8 to11% (e) Fe O: 0.49% (f) MnO: 2% (g) Glass Content: 90% Max If u want more quantity i can supply frequently.
I sell ggbs GGBS has all tests and certificates granulation 0-10mm Price 95Euro/t Slawkow Poland
I will sell Ground granulated blast-furnace slag Price 80-90Euro/MT Slawkow Poland
We can offer Granulated Blast Furnace Slag from India. Cao 32 to 41 SiO2 31 -39 Al2 O3 13- 21 MgO 6 - 11 FeO 4 MnO 2 Moisture Avg 12% maz 20% Glass content 93% max
Moisture - 18.2% SiO2 - 32.3% Ai2O3 - 13.6% Fe - 0.71% TiO2 - 0.70% Sulphur - 0.07% CaO - 40.1% MnO - 0.59% MgO - 6.70% We have supply granulated blast furnace slag, if interest kindly please send an inquiry to us.
