Wood stain formulated for deep penetration and long lasting protection. Made for interiors and exteriors, it suitable for protection of wooden products such as fixtures, matchboards, boats, garden furniture, and more. It effectively protects the wood from aggressive atmospheric conditions such as sun and water. It guarantees easy maintenance, even after long periods of time from the original application. It can be painted over or left as clean sheen allowing the natural grains and knots of the wood to be more visible and accentuated. Sku:V407
This paint is designed to be used as the base coat for a fi nishing enamels. It provides a strong base to ensure the perfect adhesion of the enamel spray on difficult surfaces such as plastics and metals. It protects metal surfaces from rust. On cars it covers small imperfections and scratches. Clean carefully the surface before application and shake vigorously the can. It dries on touch in roughly 15 minutes and dries fully in roughly 22 hours. For overcoating are required at least 24/48 hours. After use, it;s advisable to spray for 2/3 seconds with the can upside down, to avoid the block of the nozzle. Sku:V400PAST
Bituminous tar-based insulating protector, ideal for giving protection from abrasion and stone hits to all those parts of the body that are particularly exposed. Resistant to atmospheric agents. Product suitable for any type of plastic, it does not require a primer. It dries to the touch in about 30 minutes and in depth in 24 hours. Before use, shake the can for at least 2 minutes. Cod .:V400BODY
S.N CAS No. Item 1 100-21-0 Terephthalic acid 2 67763-03-5 Silsesquioxanes 3 9003-01-4 Acrylic acid 4 1333-86-4 Carbon black 5 80-62-6 Methyl methacrylate 6 61788-97-4 Haloperidol 7 75-38-7 1,1-difluoroethylene 8 100-42-5 Styrene 9 9002-84-0 Poly(tetrafluoroethylene) 10 124-04-9 Adipic acid 11 107-21-1 Ethylene glycol 12 126-30-7 Neopentyl glycol 13 85-44-9 Phthalic anhydride 14 106-89-8 Epichlorohydrin 15 9003-08-1 Amino resin 16 9006-03-5 Chlorinated rubber 17 13463-67-7 Titanium dioxide 18 12227-89-3 Iron Oxide Black 19 922-67-8 Methylpropiolate 20 538-24-9 Trilaurin 21 9011-05-6 Urea formaldehyde 22 79-41-4 Methacrylic acid 23 1314-13-2 Zinc oxide 24 80-05-7 Bisphenol A 25 121-91-5 Isophthalic acid
Botanical name Phaseolus Vulgaris Taste Typical Odor Odorless. No strange odors Color Dark red, typical Production area Northwest Argentina Under Size 5% Maximum Calibers 160/180, 180/200, 200/220, 220/260 (qty of seeds / 100 g) Packing White polypropylene packaging bag x 25/50 kilos – 50 lbs Loading 20 feet container with 24 Tons ANALYSIS VALUES Purity 99.5 %min Moisture 14.00% max Foreign bodies 0.50% max Insect damage 0.50% max Other sorts 1.00% max Stained grains 1.00% max Slightly stained 3.00% max
Quality: 1st Grade /2nd Grade Size : 180-200, 220-240 Admixture Max 1% Decolored Max 1% Packing : PP Bags p/25/50kg Season : July - February Origin : Argentina Annual production volume : 2000 Ton Container capacity : 24ton
Theaoson zinc coating spray is composed of aerosol can, aerosol valve, paint liquid and propellant. This product uses bright silver powder imported from Germany. The color of the paint film produced after use has the same high-gloss galvanized color as the galvanized parts, it has the same color as the galvanized color that fades with the exposure time, so that there is no color difference in the repaired part coated on the galvanized part. Features High-gloss bright zinc Color consistent with galvanized parts Good atomization, easy to use Application It is suitable for color changing and anti-corrosion treatment of stainless steel, carbon steel, galvanized parts and other metal parts. Base material to prepare Clean the oil, dust and water stains thoroughly before use, and polish or spray primer on the base material if necessary. Instructions: Before use, you must shake up, down, left, and right, and continue to shake the can for about 1 minute after hearing the sound of glass to ensure that the paint liquid is fully mixed and even. 15 ~ 30cm away from the surface of the object to be sprayed, press the nozzle with the index finger to spray uniformly back and forth. When a small amount of remaining liquid cannot be sprayed, please rotate the nozzle 180 �° and spray again. If spraying is not finished one time, put the can upside down before storage, press the nozzle for about three seconds, and clean the nozzle to prevent plugging. Ending working After spraying, it should be placed in a clean and ventilated environment for about 12 hours. If it is not sprayed, the remaining material needs to be kept away from the light, and avoid being near fire sources. The solution of normal problem 1. Paint film whitening: It is recommended to avoid rainy days (especially high temperature and high humidity) and the next day after continuous rain. 2. Shut up: shake evenly and spray for 3 seconds or change nozzle. 3. Spray up: low temperatures suggest using 50 â?? warm water to heat up, one-time finish spray, spray avoid angle 45 degrees. 4. Flow: use the correct spraying distance (15-25cm) and spray movement speed (30-60cm/s) to avoid a thick spray. 5. Bite bottom: remove the bottom part of the bite, fill the bottom ash, and then spray the paint after the coating is dry and flat. Attention Keep away from children, please work in the air. If swallowed, you should immediately cause vomiting and seek medical advice. Spray must be kept in aerosol cans are vertical and horizontal angle of no less than 45 �°. Flammable, pressure vessel, do not use near fire source. The weight changes over time, which is normal, and the attrition rate is less than 2%/ year.
Refractory bricks, high alumina bricks, acid proof bricks, tiles and castables, all mortars and fire clay, low cement castables, insulating castables, conventional dense refractory bricks, insulation bricks, cold face, hot face insulation bricks, hot face insulation bricks, acid resistant bricks/components, membranes, acid resistant cement, construction chemicals, class 1 ar tiles and bricks 38mm and 75mm, 4457 vitrified ar tiles with 0% water absorption, 20mm & 25m, primer, mastics, pot. silicate cement, coerce cement, furnace based cement, crushed refractory boiler bed material, acid resistant tiles, acid resistant brick fireclay type, acid resistant brick red shale type, bitumen primer, epoxy resin & hardner, furan powder and syrup solution,.
Product of Unilever Indonesia Available Variants: Korea Glow Body Wash Bright Glow, Fresh Glow, Soft Glow.
A spray booth is a specially designed enclosure used to house spray equipment and isolate expelled vapor that is generated during a spray application process. Spray processes are used to apply corrosion preventative coatings to a metallic surface. Spray booths are typically intrinsically safe and built to be fire and explosion proof. Common spray booths are: Car, truck, train paint booth Telescopic spray booth Industrial paint booth Furniture spray booth Water curtain spray room Dry spray booth
Coir fibre bale, coir pith, coco peat, grow bags, coco chips, coir needle felt, coir geo textiles, rubberized coir(latex sprayed) sheets for mattress ,mulch mats and garden articles.
Rose Damascena flower water may be used as face clean toner. Rose water Improves skin water balance.The contect of Rose oil into Rose water (around 0,06%) acts as a disinfectant and antibacterial ,so Rose water can be used to: -disinfection in skin irritations, redness, insect bites It cleanses, tones and gives a youthful appearance to each skin type while preserving the natural hydro-balance in the epidermis. Regular use of rose water in the form of tonic and face cleanser regulates the production of sebum and soothes and regenerates irritated skin. It has antibacterial action. Applied externally to inflammatory processes, acne, skin redness, eczema and itchy skin. Suitable for baby skin. -Aromatherapy uses its relaxing and soothing effect by placing it in a aromatherapy bath, in the bath, or spraying through a spray in the room. The fresh scent refreshes the spirit and harmonizes the mind. It has a toning and restoring effect, it brings a sense of romance.
The chamomile water is steam distilled from fresh blossoms of bulgarian chamomilla during the months of may and june of each year. It is a completely natural product for skin and hair application. 100% pure and natural product. Chamomile floral water soothing and relaxing effect on the human body. Ideal as a facial or hair toner and for soothing irritated skin. Chamomile floral water is so mild it is ideal for use on babies. It can be added to bath water or used as a calming bedding / pillow spray.
Chamomile oil has excellent calming properties, chamomile is very effective for irritation, impatience and feeling disagreeable, and has great value in treating menstrual and menopausal problems, chamomile is also effective on the skin, not only to sooth and calm, but to heal and for tissue regeneration. Chamomile essential oil has a sweet, straw-like fragrance, is dark blue in color and its viscosity is medium. Chamomile oil is mostly cultivated in hungary, egypt, eastern europe and france, while roman chamomile is cultivated in germany, france, spain, italy, morocco and france.
Juniper bushes can be found in eastern Europe, Bulgaria, Hungary, also in western Europe France and Spain and in north America - Canada. This evergreen shrub grows up to 6 metres tall. It has dark green or blue needles and small flowers and berries. The berries change colour over the first few years of growth. They start off green, but after a year or two, they turn black. Juniper is used to flavour food and drink and is the characteristic aroma in gin.
1K Winstrip KNL400 is a neutral, yet intensive, CHC-free cold paint stripper. Based on organic solvents, it is particularly suitable for removing several layers of paint and varnish in one dip.
Size 1 litre 5 litres 15 litres Winstrip KSG 650 paint stripper paste â??PH 1-2 extremely strongly acidicâ?? KSG 650 is a multifunctional thixotropic cold paint stripper based on solvents. It is ideal for stripping wood materials. Also ideal for all types of metals and non-ferrous metals. Due to its thixotropic properties, it is suitable for vertical or upside down surfaces. Size 1l, 5l, 15l
Winstrip-Gel KSG600 is a multifunctional, mild-smelling, ready-to-use, thixotropic cold paint stripper based on special organic solvents and selected corrosion inhibitors Size 1 litre 5 litres 15 litres Winstrip-Gel KSG600 is a multifunctional, mild-smelling, ready-to-use, thixotropic cold paint stripper based on special organic solvents and selected corrosion inhibitors. The product quickly and safely removes a wide variety of paint systems, e.g. air-drying epoxy paints, polyurethane paints, NC paints (nitrocellulose paints), acrylic paints, dispersions, wet primers and most conventional paints and corrosion protection primers. Winstrip-Gel KSG600 is ideal for stripping paint and stripping all types of wood and metal, such as aluminum, zinc, iron, etc. It is also suitable for non-ferrous metals such as copper, aluminum, zinc, bronze. The paint stripper is used for spray hooks, engine parts and for vehicles, trucks, car chassis, in boat building and for steel structures, etc. Winstrip-Gel KSG600 is safe to use and hardly drips on vertical surfaces or overhead due to its good thixotropic properties Weight 4.93kg Size 1l, 5l, 15l
Highly heat-resistant paint spray up to 800 for painting and protecting parts that are exposed to high temperatures such as exhaust systems, engines, grills and ovens. Quick-drying, weatherproof and petrol-resistant. Suitable as corrosion protection. Size 400ml
Highly heat-resistant paint spray up to 800 for painting and protecting parts that are exposed to high temperatures such as exhaust systems, engines, grills and ovens. Quick-drying, weatherproof and petrol-resistant. Suitable as corrosion protection.
