Four Socket Cross Suppliers and Manufacturers

Riceberry Rice is the new variety of rice that has been bred in Thailand. The rice is deep purple in colour; this gorgeous dark colour is typical of plants that yield high nutrition. Rice berry rice is cross-pollination of three hardy and loved rice strains. Riceberry takes on the best attributes of each of the grains that were used in its inception. The light fluffy texture and flavour from Thai jasmine rice, high in minerals and antioxidants from Hom Nin rice and hardy and high yield characteristics of Khao Dawk Mali 105. Packaging sizes: 1kg, 5kg, 10kg, 15kg, 20kg, 50kg, bulk

FH SERIES OF PRODUCTS: FH products are Pure nonionic derived the endosperm of guar polysaccharide (Cyamopsos tetragonolobus). The products are unique with ultra-high viscosity with fastest hydration characteristics as shown in Figure 1 below. Also, when added with other drilling components, to seawater, a KCl solution or other aqueous system, the product suspension disperses readily without lumping, even under low-shear conditions generating most of its full viscosity within just a few minutes. PRODUCT COMPATIBILITY: FH series of products are compatible with most of the chemicals and auxiliaries used in drilling operations. However, the products are not compatible with Arabic and Crystal gums. Also, in presence of borates they form elastic gel. PRODUCT APPLICATIONS: FH series of products are natural, high viscosity, fast hydrating non-Newtonian hydrocolloids with suitable cross linking components in diesel slurries and are versatile for continuous mix applications, where extremely fast hydration and subsequent viscosity development is required. They are excellent viscosifiers, stabilizers, thickeners and suspending agent for use in oil-drilling, workover fluids and several other oilfield applications like hydraulic fracturing, oil well stimulation, mud drilling, oil well capping, flocculent and liquid shoring etc. The product is used as a surfactant; synthetic polymer and deformer ideally suited for all rheological requirements of water based and brine based drilling fluids. Specifications:- PRODUCT : FH-35 FH-38 FH-42 CAS No. : 9000-30-0 9000-30-0 9000-30-0 Granulation : FINE FINE FINE APPEARANCE : OFF WHITE POWDER MOISTURE : 8% Max. 8% Max. 8% Max. PROTEIN (N X 6.25) : 5.0% Max 5.0% Max 5.0% Max ASH : 1.5% Max. 1.5% Max. 1.5% Max. ACID INSOLUBLE RESIDUE (A.I.R.) : 3% Max. 3% Max. 3% Max. CARBOHYDRATE (incl gum by difference) : 82% Min 82% Min 82% Min pH (1% Solution) : 5.5 ? 6.5 5.5 ? 6.5 5.5 ? 6.5 VISCOSITY : (0.48% Product in 2% KCL Sol. 2.5 mins mix @1500 RPM in waring blender) Fann 35sa Viscometer at 300 RPM, 25�C 3 Mins : 35 3 Min:38 3 Mins : 42 5 Mins : 37 5 Mins : 39 5 Mins : 43 30 Mins : 39 30 Mins : 42 30 Mins : 45 60 Mins : 40 60 Mins : 43 60 Mins : 47

StaThick-MS is a chemically modified Maize starch, Vegan, Gluten-Free, Plant-based, Non-GMO starch. It is produced by Cross-linking, which involves replacement of hydrogen bonding between starch chains by stronger covalent bonds.

StaThick-MS is a chemically modified Maize starch, Vegan, Gluten-Free, Plant-based, Non-GMO starch. It is produced by Cross-linking, which involves replacement of hydrogen bonding between starch chains by stronger covalent bonds.

FryShineTM is a Physically Modified starch, Vegan, Gluten-Free, Plant-based, Non-GMO starch. It is produced by Physical modification of starch with functional food ingredients to enhance the textural properties and expansion of fryum related products. FryShineTM is used to enhance the texture of Fryum related products. FryShineTM disperses well with other ingredients and improves the overall crispiness of the product. The starch molecules in FryShineTM form strong cross-links with other ingredients and create network like structure. When fried in oil at high temperatures, moisture and air bubbles trapped will evaporate and forms a porous structure which in turn provides the crispy texture. This process will also increase the expansion ratio of the product. FEATURES AND BENEFITS *FryShineTM enhances the texture of the product providing excellent crispiness *It improves the shiny appearance of the product *It can be used as Functional Food ingredient and label friendly product *It is minimally processed starch with no residues of chemicals. *It is highly bio-degradable and causes no harm to the Environment. *FryShineTM is a White powder that adds no color to application and blends well with other ingredients. It has a bland taste and so will not mask flavors or aromas. DOSAGE Use 1 to 3% FryShineTM of total batch size. For excellent results, maybe use upto 5% FryShineTM of total batch size.

This is chemical setting Furan based chemical resistant mortar which is combination of Liquid and Powder, when mixed in proper proportion from workable mortar which after setting and curing give of liquid and give black highly cross linked composites. Furan When set and cured is resistant to highly corrosive acids, alkalis and to powerful organic solvents such as ketones, Aromatic and Chlorinated solvents. It has extreme resistant to Acidic & alkalis, Salts, Greases and Detergents. It resists to Organic & Inorganic acids at their boiling temperature. It is suitable against mild chlorine Gas (dry) phosphorous trichloride, pyridine at room temperature. Furan is especially useful where resistance to mixed media such as aqueous acids /alkalis and organic solvents is needed in chemical plant process and waste streams. Carbon filled Furan is used against corrosive effect of hydrofluoric acid & its salts. PREPARATION OF FURANE MORTAR : Mortar consist of Furan solution and Furan powder. The average mixing ratio necessary to obtain mortar with good working consistency is 1 part by weight Solution & 3 part by weight powder. The ratio will vary slightly depending on temperature and working conditions.Stir the liquid thoroughly before using. Place liquid in a suitable shallow mixing pan. Add powder by weight in the solution mix thoroughly and rapidly until all lumps are dispersed and the mortar is completely homogenous. Spread out the mortar in a thin layer, not more than ¾ thick, to dissipate the heat of reaction and lengthen the working life. Batch size can be varied depending upon the temperature and the speed with which the masons are working. Very large batches will become stiff quite rapidly. Make sure that all the Furan Motrar is used from the pan before another batch is mixed.When working at temperature above 40 C, very small batches not more than 2 Kgs, should be prepared. When working at temperature below 15C the liquid should be kept warm.

Socket Plain Fig

It is processed by controlled thermal or chemical treatments to increase its strength compared with normal glass, about four times stronger than annealed, glass. When broken, tempered glass fractures into small, relatively harmless pieces, it is widen used for window, door, railing, furniture, vehicle.

Four Column Laundry Soap Vending Machine This Laundromat vending machine includes a durable exterior with a large plexi-glass display section that clearly shows each column\'s contents. High-security locks ensure the door stays closed at all times to prevent tampering and theft, while the internal cash box is also locked for added profit protection. Package weights seal off the vend cycle of a column when it is empty to prevent user abuse, and for maximum storage potential, each column holds up to 23 stacked packages. Additional information Weight 98 lbs Quantity 1/Each Type Vending Machines Width 21 1/4 Inches Depth 9 1/2 Inches Height 37 3/4 Inches

We are a West African company into exports of KOLA NUT in large quantities from our KOLA NUT plantation in Cross River and Osun State. We have large quantity of both KOLANUT NITIDA( The One Lobe Kola Nut) and ACUMINATA( The Two,Three,Four Sided Lobe Kolanut) DRIED KOLA NUTS ( 1.5 USD / 16Oz /1 lbs) DRIED CUT & SIFTED KOLA NUTS ( 2 USD/ 16Oz/1 lbs) POWDERED KOLA NUTS (2.2 USD / 16 Oz /1 lbs) We package from 1oz,2Oz,8Oz,16oz,1lbs,2lbs,1kg,5kg10kg,20kg,50kg and 100kg OR According to Buyers Request.

We are a West African company into exports of KOLA NUT in large quantities from our KOLA NUT plantation in Cross River and Osun State. We have large quantity of both KOLANUT NITIDA( The One Lobe Kola Nut) and ACUMINATA( The Two,Three,Four Sided Lobe Kolanut) which we process into Kolanut Powder for industrial and personal uses Our Kolanut is well dried and blended with proper steel equipments to give the best of Pulverised Kolanut Powder. We package from 1oz,2Oz,8Oz,16oz,1lbs,2lbs,1kg,5kg10kg,20kg,50kg and 100kg OR According to Buyers Request.