Please click here to check who's online and chat with them.

Find Verified Aluminum Mirror Finish Tapper Sauce Pan Suppliers, Manufacturers and Wholesalers

GOLD Member
VERIFIED
Aug-13-22
Supplier From Jamnagar, Gujarat, India
 
Goat Finisher Feed (G-100515)

Moisture (% Maximum) : 12

Crude Protein (%Minimum) : 15

Crude Fat (% Minimum) : 5

Metabolisable Energy MJ/kg : 11.5

Calcium (% Minimum) : 1.5

Phosphorus (% Minimum) : 0.7

Crude Ash (% Maximum) : 9

Crude Fiber (% Maximum) : 14

GENERAL DETAILS

Ingredients : Corn Gluten Meal, DDGS, Pluses, Essential Amino Acids, Vitamins, Minerals, Trace Minerals, Toxin Binders and Mold Inhibitor

Ingredient Profile : 100% Vegetarian

Moisture (% Maximum) : 12

Product Form : Coarse Mash Form / Pellet Form

Product Branding : ANUPAM

Net Weight : 39 Kgs When Packed

Product Pricing : On Unit Basis (for each 39 Kgs Packing)

Production Capacity per Day : 450 MT/Day

Factory Visit : Not Permissible

Fumigation : Aluminum Phosphide or Methyl Bromide (or any as per buyer specification)

Clinical Test Methodology : As per IS:2052 Proximate Analysis on Dry Matter Basis

BASIC INFORMATION FOR DOMESTIC BUYERS

Outer Packing : Poly Propylene (Milky White)

Price Offer : On Ex- Factory Basis

Mode of Payment: 100% Advance Through Bank, Cash/ Cheque/ RTGS/NEFT

For Inter State Transaction : VAT Number is Must

Tax Applications : NIL

Truck Loading : 17 MT: 440 Bags, 21 MT: 540 Bags, 25 MT: 645 Bags, 28 MT: 720 Bags

Minimum Order Quantity : As per Buyer Requirement & Material Availability with us.

Buyer Branding Offer : Yes, for Bulk Orders Only. Buyer has to arrange for Packing Material

BASIC INFORMATION FOR OVERSEAS BUYERS

Inner Packing : Low Density Polyethylene Bags of 75 Micron

Outer Packing : Poly Propylene (Milky White)

Price Offer : On CIF Destination Port Basis or Delivery basis to Nearest Transit Port

Mode of Payment : 100% Wire Transfer Only, we dont accept L/c or SBLC of any nature.

Terms of Trade : Mutually Agreeable Basis

Cargo Stuffing in 20 FCL: 600 Bags of 39 Kgs

Total Load Stuffing : 23.4 MT in 20 FCL

Minimum Order Quantity : 600 Bags or One 20 FCL

Buyer Branding Offer : Yes, when MOQ = 3000 Bags or Five 20 FCL

Nearest Transit Ports : Kandla Port, Adani Port and Pipavav Port

Buyer Specific Packing Offered : Yes, when MOQ = 3000 Bags or Five 20 FCL

Our Standard Shipping Document

Phytosanitary Certification

Fumigation Certificate

Food Hygiene Certificate from Veterinary Department
GOLD Member
VERIFIED
Aug-13-22
Supplier From Jamnagar, Gujarat, India
 
Duck Finisher Feed 6 8 Weeks (D-030316)

Moisture (maximum %) : 12

Crude protein (N x 6.25) (maximum %) : 16

Crude Fat (maximum %) : 2.5

Crude fibre (maximum %) : 7

Acid-insoluble ash (maximum %) : 4.0

GENERAL DETAILS

Ingredients : Corn Gluten Meal, DDGS, Pluses, Essential Amino Acids, Vitamins, Minerals, Trace Minerals, Toxin Binders and Mold Inhibitor

Ingredient Profile : 100% Vegetarian

Moisture (% Maximum) - 12

Product Form : Coarse Mash Form / Pellet Form

Product Branding - ANUPAM

Net Weight : 39 Kgs When Packed

Product Pricing : On Unit Basis (for each 39 Kgs Packing)

Production Capacity per Day : 450 MT/Day

Factory Visit : Not Permissible

Fumigation : Aluminum Phosphide or Methyl Bromide (or any as per buyer specification)

Clinical Test Methodology : As per IS:2052 Proximate Analysis on Dry Matter Basis

BASIC INFORMATION FOR DOMESTIC BUYERS

Outer Packing : Poly Propylene (Milky White)

Price Offer : On Ex- Factory Basis

Mode of Payment : 100% Advance Through Bank, Cash/ Cheque/ RTGS/NEFT

For Inter State Transaction : VAT Number is Must

Tax Applications : NIL

Truck Loading : 17 MT: 440 Bags, 21 MT: 540 Bags, 25 MT: 645 Bags, 28 MT: 720 Bags

Minimum Order Quantity : As per Buyer Requirement & Material Availability with us.

Buyer Branding Offer : Yes, for Bulk Orders Only. Buyer has to arrange for Packing Material

BASIC INFORMATION FOR OVERSEAS BUYERS

Inner Packing : Low Density Polyethylene Bags of 75 Micron

Outer Packing : Poly Propylene (Milky White)

Price Offer : On CIF Destination Port Basis or Delivery basis to Nearest Transit Port

Mode of Payment : 100% Wire Transfer Only, we dont accept L/c or SBLC of any nature.

Terms of Trade : Mutually Agreeable Basis

Cargo Stuffing in 20 FCL : 600 Bags of 39 Kgs

Total Load Stuffing : 23.4 MT in 20 FCL

Minimum Order Quantity : 600 Bags or One 20 FCL

Buyer Branding Offer : Yes, when MOQ = 3000 Bags or Five 20 FCL

Nearest Transit Ports : Kandla Port, Adani Port and Pipavav Port

Buyer Specific Packing Offered : Yes, when MOQ = 3000 Bags or Five 20 FCL

Our Standard Shipping Document

Phytosanitary Certification

Fumigation Certificate

Food Hygiene Certificate from Veterinary Department India

 
Dec-30-15
 
Grade: 1000 Series
Temper: O-H112
Type: Plate
Application: ceilings, decorations, lighting labels & signs etc.
Thickness: 0.1-3.0mm
Width: 30-1500mm
Surface Treatment: Coated
Alloy Or Not: Non-alloy
Place of Origin: Henan, China (Mainland)
Brand Name: Yuanlong
Model Number: 1000series
Sheet Or Coil: Depends On Thickness
Reflective: 75%,86%,90-98%
Roll weight: Customized
Color: Criginal Aluminum Color
OD: Depends On Weight
ID: 76/505 mm Usually


Packaging Details: aluminum mirror reflective sheet Standard Export Packaging or According to Customers' Requirements
Delivery Detail: 30 Days After Receiving 30% Prepayment
GOLD Member
VERIFIED
Mar-02-25

Hand-Knotted Mala With Amethyst And Black Onyx

$25 - $28
MOQ: 20  Pieces
Sample Available
 
Premium Handmade Customized Black Onyx, Amethyst Mala/Necklace with Natural Carnelian & Tiny Brass Beads -Hand-Knotted Malaâ??comes with unbreakable finishing.

Materials Used: 8mm Natural Amethyst, Black Onyx, and Amethyst Tumble Beads & Brass Tiny Beads
Guru Bead: Amethyst Cutting Tumble stone
Length: 22-24 inches
End Work Length: 1-2 Inches
Thread color: Black (Any color of threads is available)
Any kind of Customization is available.

WHAT WE PROMISE YOU
* Free Worldwide Shipping on every product. (Paid Express shipping is also available in the checkout process.)
* Each purchase comes with an attractive box and a colorful silk or organized bag. Optional gift wrapping is also available.
* We guarantee the quality of every item.
* Please get in touch with us directly if you have any problems with a purchase, such as a lost package or an item that is not as expected. We will make it right Immediately.
* A unique set of quality products you wonâ??t find elsewhere, inspired by our travels throughout India and our passion for ethnic arts and crafts.
* we enthusiastically accept requests for custom designs using Gemstones, wooden beads, 925 Silver, Brass, and Aluminum.

WHOLESALE PRICING

* As the manufacturer, Namya Artzy can also offer listed products on my Retail website and custom at reasonable wholesale prices for quantities as low as 20 pieces. If you want to buy in bulk, please do not hesitate to contact us by email or message.
GOLD Member
Mar-07-25

Inconel 800 Sheet

MOQ: 100  Kilograms
Sample Available
Supplier From Mumbai, Maharastra, India
 
We one of the leading Manufacture, Importer & Supplier of Sheet, Plate & Coil in different shape and size with different specification as per customers requiment. Our complete range is stringently test by our well-equipped testing unit to ensure their compliance with international quality norms.
Product Specification: INCONEL 800 SHEET
Specification: ASTM / ASME
Size: 100MM TO 2000MM WIDTH & 1000MM TO 6000MM LENGTH
Thk : 0.1MM TO 120MM
Type: 2B, CR(COLD ROLL),HR(HARD ROLL) MAT, Polish, BA. MIRROR FINISH
Form: Sheet, Plate, Coil
Grade:
High Nickel Alloy:
Inconel: Inconel 601, Inconel 625, Inconel 800, Inconel 825, Inconel 718, Inconel X-750.
Product Details
Brand :
Place of Origin : India
FOB Price : On Request
Minimum Order Quantity : Any
Supply Ability :
Packaging & Delivery
Packaging Detail :
Packing the Material with the Babal Plastic & then in the Box
After wthe the final packing then we keep & pack in the wooden box.
Nissan Steel also pack the material as per the client requirment & specification.
Delivery Detail :
As per discussion with the client during or berfore placing the Order & On Time
Product Specification: INCONEL 800 SHEET
Specification: ASTM / ASME
Size: 100MM TO 2000MM WIDTH & 1000MM TO 6000MM LENGTH
Thk : 0.1MM TO 120MM
Type: 2B, CR(COLD ROLL),HR(HARD ROLL) MAT, Polish, BA. MIRROR FINISH
Form: Sheet, Plate, Coil
Grade:
High Nickel Alloy:
Inconel: Inconel 601, Inconel 625, Inconel 800, Inconel 825, Inconel 718, Inconel X-750.
5263 Aluminum Mirror Finish Tapper Sauce Pan Suppliers
Short on time? Let Aluminum Mirror Finish Tapper Sauce Pan sellers contact you.
GOLD Member
Feb-24-25
Supplier From Mumbai, Maharastra, India
 
Product Details:
Condition New
Application Fabrication,Pharmaceuticals
Thickness/Diameter 0-1 inch, >4 inch, 2-3 inch, 3-4 inch, 1-2 inch
Shape As per customer shape & size
Surface Finish smooth
Anodised Yes
Range 1 mm to 50 mm
Finishing smooth & rough depend on thickness
Dimensions 500 x 500 x100
Brand Jindal / Outokumpu
Is It Anodised Anodised
Usage/Application Furnace
Surface Finishing CR / HR
Single Piece Length 18 meter, 6 meter, 36 meter, 3 meter, >36 meter,kess than 1 mtr cutting also

Available shapes: Flats, squares and rounds

Tempers: T6, T651, T6511

Specifications: ASTM B211, AMS 4115, AMS 4116, AMS 4117, AMS 4128, AMS-QQ-A-225/8 ASTM B221, AMS4150, AMS 4160, AMS 4161, AMS-QQ-A-200/8

Typical Chemical Composition %Weight %SiFe CuMnMgCrZnTi Each Total

Minimum 0.40 0.15 0.80 0.04

Maximum 0.80 0.70 0.40 0.15 1.20 0.35 0.25 0.15 0.05 0.15

Remainder Aluminum

Typical Mechanical PropertiesTemper Tensile Hardness

Ultimate Yield Elongation Brinell

KSI MPA KSI MPA %

T6, T651 45 310 21 145 25 65

SHOP 6061 ALUMINUM BAR STOCK
Apr-28-22

Sauce Pan

$10
MOQ: Not Specified
Supplier From Zhuhai, Guangdong, China
 
stainless steel, tempered glass lid with 8mm hole for extracting steam,
VERIFIED
Jun-01-21

Mastic

MOQ: Not Specified
Supplier From Ahmedabad, Gujarat, India
 
METHOD OF APPICATION:

* Mastic compound application consist of two coats of. Primer ,Primer and followed by Mastic compound in recommended thickness, ranging from min. 12mm to 25mm in one or two layers to achieve desired thickness without any pin hole and crack.


1). Surface preparation and application of Primer: Refer application method of Primer.


2). After doing necessary surface preparation and application of primer coating, area to be installed with Mastic compound should be divided in to equal no. bays. To maintain even thickness required, place wooden or aluminum batten. Mastic compound is then broken in small pieces and put it in heating pan. While heating, keep material moving to avoid burning. It is heated until it comes in a uniform consistency and then applied on the surface and works it with wooden float, to achieve uniform thickness and smooth surface free from any pinholes.

CHEMICAL RESISTANCE PROPERTIES:

* Mastic compound has good resistance to weak, diluted acids, alkalis salts etc. It is not recommended to use against strong acids, oxidizing acid solvents, oil and fats

STORAGE & PACKING:

* Keep Mastic compound away from direct sunlight, heat solvents etc. Under this condition, its shelf life is unlimited. It is supplied in cake form and approx. wt. is 10 kgs.

HEALTH & SAFETY:

* Handle melted Mastic compound compound very carefully . Avoid contact with skin. It is advisable to wear protective wears at the time of use of Mastic compound and all other our products. This information, given in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use are beyond our control.
VERIFIED
Jun-01-21
 
APPLICATION OF SK-HB K-SILICATE MORTAR :

* K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors.
It is also used for jointing chemical resisting stoneware pipes.
K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles.
The concrete surface needed protection should be dryed, clean and rough.
The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner.

When Bedding and Jointing Materials are the same.
On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints.
The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water.
Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic.
When Bedding and Jointing Materials are Different.
Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR
A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions.

PREPARATIONS OF MORTAR :
* Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan.

* Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar.

* In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared.

* The cement mortar will be used before it starts setting.
GOLD Member
VERIFIED
Mar-01-24
Supplier From Jepara, Jawa Tengah, Indonesia
 
Looking for luxury dining table furniture that makes the room elegant and expensive, to have a dining room that looks classy doesn't seem to be a difficult problem. Now we provide the most luxurious dining table design in its class, combining original Jepara furniture carvings to make it look attractive and have very high artistic value. Equipped with 8 dining chairs, decorative cupboard, dressing table and mirror to add luxury to your Jepara carved dining table space.

This luxury classic dining table product was made by expert Jepara furniture craftsmen with a strong and sturdy construction, using quality solid Perhutani teak/mahogany wood (Grade A), finished in Broken White Combi Silver with a luxurious impression and covered with leather upholstery. /Bludru (on request) added with Royal Foam (Soft & Chewy) will certainly make this classic carved dining chair very comfortable to sit on.
GOLD Member
VERIFIED
Mar-21-24
Supplier From Jepara, Jawa Tengah, Indonesia
 
Price - $ 4,410

Bedroom set LHF-110
Contrast of King Size Bed 180-200 cm, Wardrobe with 4 Doors, 2x Side Table, Dresser with mirror, Coffee Table with 2 Chairs
Material : Mahogany finishing duco
Pre-Order
And according to the request

Bedroom Set LHF-110 is one of the best product of Luxury Home Furniture. With this product your room becomes more beautiful and comfortable. Bring this Bedroom Set LHF-110 to your beloved family home, your hotels, appartments, etc!.

This Bedroom Set LHF-110 made with a beautiful design with high quality materials that will make your family feel at home for long. This product comes in a variety of colors and sizes
GOLD Member
Oct-27-20
Supplier From Porto Alegre, Higienopolis, Brazil
GOLD Member
Feb-18-25
Supplier From Mississauga, Canada
 
Aluminium 6063 is a high-quality alloy known for its excellent workability, corrosion resistance, and smooth surface finish. Commonly used in architectural and structural applications, it's ideal for window frames, doors, and other construction materials. Pop cans, made primarily from aluminum, are lightweight, durable, and easily recyclable, making them an environmentally friendly choice. Both materials offer superior strength and performance, with Aluminium 6063 providing exceptional versatility in fabrication and pop cans offering an eco-conscious option for packaging.
Mar-08-08

Sauce Pan

$9.82
MOQ: Not Specified
 
Sauce pan

Material:3-ply material(304 s.S+alu+430 s.S)
Thickness:2.5mm
Lid:0.8mm 304 s/s
Handle and knob:solid cast steel
Polish: mirror inside and outside, satin finished bottom
Use for induction cooker.

Size:14*7.Cm , 1pc with color box, carton size:31.5*31*35cm
GOLD Member
VERIFIED
Dec-28-24

Aluminum Ingots A7

$1.70K
MOQ: 27  Metric Tonnes
Supplier From Coral Gables, Florida, United States
 
We supply premium-grade Aluminum Ingots suitable for a wide range of industrial and manufacturing applications. Our ingots are refined to meet international standards, offering consistent quality and exceptional performance in diverse industries.

Key Features:
Purity: 99.7% and above (as per customer requirements).
Weight: Standard ingot weight (approx. 15�¢??25 kg per ingot).
Appearance: Smooth surface finish, free from dirt and impurities.
Packaging: Stacked and strapped for secure transportation.

Specifications:
Grade: A7, A8, or as specified.
Supply Capacity: 6,000 MT/month
Delivery Terms: FOB, CFR, CIF

Payment Terms: DLC or SBCL

Get in touch to place an order or request detailed product specifications and pricing for Aluminum Ingots. Our team is ready to assist with tailored solutions to meet your business needs.
GOLD Member
May-05-25
Supplier From Meerut, Uttar Pradesh, India
GOLD Member
VERIFIED
Apr-11-24

Aluminum Wire Scrap 99%

$800
MOQ: 6ton  Tons (UK)
 
Item
Aluminum Wire
Temper
F, O, H112, T3, T351, T4, T5, T6, T651, etc.
Material
1000 Series:1010,1030,1050,1060,1080,1100,1235,1435,etc.
2000 Series:2011,2014,2017,2024,2124,2A12,2A16,2A06,etc.
3000 Series:3002,3003,3004,3005,3104,3105,3204,3030,3A21,etc.
4000 Series:4004,4005,4032,4043,4047,4A01,4A13,etc.
5000 Series:5005,5025,5040,5052,5056,5083,5754,5A05,etc.
6000 Series:6003,6060,6082,6083,6063,6061,6101,6A02,etc.
7000 Series:7003,7005,7050,7075,7475,7A01,7A03,7A05,etc.
Diameter
0.05-10 mm
Surface Finish
Brushed,polished,mill finish, power coated,sand blast
Standard package
Wooden pallets, Wooden cases or according to customerâ??s requests


Payment terms : TT only
GOLD Member
Nov-21-24
 
* ISO Aluminum alloy is one of the most widely used non-ferrous structural materials in industry. It has been widely used in aviation, aerospace, automobile, machinery manufacturing, shipbuilding and chemical industry. With the rapid development of science and technology and industrial economy in recent years, the demand for aluminum tube and aluminum tube is increasing day by day. The production process of aluminum tube generally adopts the production process of ingot heating - extrusion - finishing. For aluminum alloy materials that can be strengthened by heat treatment, quenching and aging treatment should also be carried out. Hard alloy and high magnesium aluminum alloy pipes generally adopt the production process of cold rolling extruded tube billet first, and then stretching out finished products.

Product Name : ISO Aluminum tube

Price range : $1000-$2000 Discounts are available for large orders

Minimum order quantity : 1 ton

Specifications

Thickness 1-50mm, External diameter3-900mm,or according to requirements

Standard : ASTM, JIS, DIN, GB,

Steel Grade : ASTM B210/B241 JIS H4080 DIN 1725-1-1986

Test : Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection, Hydro static Test, X-ray Test.
certification : ISO,SGS,BV,TUV,

Processing Service : Welding, Drilling, Cutting, Bending

Surface treatment : Mill finish, anodized, powder coated, electrophoresis, sand blasting, wood grain painting, matted, polishing bright etc.

Packing : Wooden pallet or according to customer's request

Lead time : 7 to 15 working days

Payment terms : T/T ,LC

Exporting country : Europe: Norway, Romania, Hungary, Austria

South America: Chile, Argentina, Colombia, Venezuela , etc

Warehouse Storag :e

Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project
GOLD Member
Nov-22-24
 
* ASTM Aluminum alloy is one of the most widely used non-ferrous structural materials in industry. It has been widely used in aviation, aerospace, automobile, machinery manufacturing, shipbuilding and chemical industry. With the rapid development of science and technology and industrial economy in recent years, the demand for aluminum tube and aluminum tube is increasing day by day. The production process of aluminum tube generally adopts the production process of ingot heating - extrusion - finishing. For aluminum alloy materials that can be strengthened by heat treatment, quenching and aging treatment should also be carried out. Hard alloy and high magnesium aluminum alloy pipes generally adopt the production process of cold rolling extruded tube billet first, and then stretching out finished products.

Product Name : ASTM Aluminum tube

Price range : $1000-$2000 Discounts are available for large orders

Minimum order quantity : 1 ton

Specifications : Thickness 1-50mm, External diameter3-900mm,or according to requirements

Standard : ASTM, JIS, DIN, GB,

Steel Grade : ASTM B210/B241 JIS H4080 DIN 1725-1-1986

Test : Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection, Hydro static Test, X-ray Test.

certification : ISO,SGS,BV,TUV,

Processing Service : Welding, Drilling, Cutting, Bending

Surface treatment : Mill finish, anodized, powder coated, electrophoresis, sand blasting, wood grain painting, matted, polishing bright etc.

Packing : Wooden pallet or according to customer's request

Lead time : 7 to 15 working days

Payment terms : T/T ,LC

Exporting country : Europe: Norway, Romania, Hungary, Austria

South America: Chile, Argentina, Colombia, Venezuela , etc

Warehouse Storage

Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project
GOLD Member
Nov-22-24
 
Aluminum alloy is one of the most widely used non-ferrous structural materials in industry. It has been widely used in aviation, aerospace, automobile, machinery manufacturing, shipbuilding and chemical industry. With the rapid development of science and technology and industrial economy in recent years, the demand for aluminum tube and aluminum tube is increasing day by day. The production process of aluminum tube generally adopts the production process of ingot heating - extrusion - finishing. For aluminum alloy materials that can be strengthened by heat treatment, quenching and aging treatment should also be carried out. Hard alloy and high magnesium aluminum alloy pipes generally adopt the production process of cold rolling extruded tube billet first, and then stretching out finished products.

Parameter

Product Name : Aluminum tube

Price range : $1000-$2000 Discounts are available for large orders

Minimum order quantity : 1 ton

Specifications

Thickness 1-50mm, External diameter3-900mm,or according to requirements

Standard : ASTM, JIS, DIN, GB,

Steel Grade : ASTM B210/B241 JIS H4080 DIN 1725-1-1986

Test : Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection, Hydro static Test, X-ray Test.
certification : ISO,SGS,BV,TUV,

Processing Service : Welding, Drilling, Cutting, Bending

Surface treatment : Mill finish, anodized, powder coated, electrophoresis, sand blasting, wood grain painting, matted, polishing bright etc.

Packing : Wooden pallet or according to customer's request

Lead time : 7 to 15 working days

Payment terms : T/T ,LC

Exporting country : Europe: Norway, Romania, Hungary, Austria

South America: Chile, Argentina, Colombia, Venezuela , etc

Warehouse Storage : Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project
5263 Aluminum Mirror Finish Tapper Sauce Pan Suppliers
Short on time? Let Aluminum Mirror Finish Tapper Sauce Pan sellers contact you.
Explore Aluminum Mirror Finish Tapper Sauce Pan related import export discussions