The machine is suitable for tamping operation on various rail and concrete sleeper track after the overhaul and medium ballast cleaning operation, and also suitable for tamping operation on the ballast bed of new track. This machine has the features of high quality performance, reasonable structure, reliable and high working efficiency, which will satisfy the requirement of ballast tamping operation. Specification Model YD-22 Type Rail Tamping Machine Material Stainless Steel Dimensions (L x W x H) (mm) 1300 * 750 * 1600mm Engine Diesel Engine SF190 Power 7kW Vibrating force 22kN Vibrating frequency 66.7Hz Hydraulic system working pressure 5~6MPa Max insert force 16kN Max clamping force 6.5kN * 2 Production efficiency â?¥ 270 pieces / (group â?¢ hour) Inserting depth 110mm ± 10mm (underneath the sleeper) Weight 439kg
NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories.
NLB-300 railway construction rail fastener wrench is used for tightening and loosening sleeper bolts, hook-bolt nuts, etc. High power petrol engine ensure large torque and high working efficiency. Specification Model NLB-300 Type Rail Impact Wrench Material Stainless Steel Dimensions (L x W x H) (mm) 1300*510*760mm Main shaft rpm 780r/min Max. loosen torque 300 Nâ?¢m Max. fasten torque 150 Nâ?¢m Working efficiency 10 pieces/min Petrol engine 1) Model: GX160 (2) Rated power: 4Kw (3) RPM: 3600r/min Weight 60kg
Portable Rolling Track Gauge is mainly used for railway track gauge and super-elevation (cant) . It can be used for track inspection and fine adjustment of rail gauge. This product has the advantages of fast measuring speed, stable pushing rod, easy to carry,and night-time and tunnel work,legible even in direct sunlight are supported.It is an ideal measuring tool for track fine-tuning, track construction,inspection and track laying.
GDJ-I Rail Alignment Frames for aluminothermic welding is a new tool for various of rails alignment, itâ??s a special device used for rail alignment when thermit welding. It has the features of reasonable structure, good performance, perfect quality, and save laber. Place of Origin Hubei, China Type Rail Alignment Frames Material Stainless Steel Dimensions (L x W x H) (mm) 670*600*510mm Brand Name Linkage Product name Rail Alignment Frames Dimensions (L x W x H) (mm): 600*540*170mm Max rail lifting force: 15kN Machine weight: 21kg Span: 460mm Material: steel Packaging and delivery Packaging Details PE foam+paper carton Slope Measuring Instrument Port Shenzhen Supply Ability Supply Ability 500 Unit/Units per Month
Rail turn bar rail maintenance equipment rail turner Place of Origin Hubei, China Type railway tools Material Aluminum alloy Dimensions (L x W x H) (mm) 1800*30*120mm Brand Name Linkage Type: Rail turn bar length 1500mm Applicable rail type: 43/50/60 rail Color: customized Approved: ISO Certificate CE Warranty: 1 year Standard: CRCC Customized: yes Packaging and delivery Selling Units: Single item Single package size: 155X10X15 cm Single gross weight: 3.000 kg
Rail Laser Displacement Measuring Equipment for railway Creeping measuring Place of Origin Hubei, China Type railway tools Material Stainless Steel Brand Name Linkage Type: Rail Creeping Measuring Equipment STYLE Rail Laser Displacement Measuring Equipment Laser measure distance: 5m Accuracy: 2mm Battery: 2000mAh (continuous using 5-6 hours) Approved: ISO Certificate CE Warranty: 1 year Standard: CRCC Customized: yes Packaging and delivery Selling Units: Single item Single package size: 55X15X10 cm Single gross weight: 2.000 kg
Magnetic Monitoring Prism Mount adapter strong magnetic rail shoe 1.Magnetic Monitoring Prism Mount/Base/ Tribrach Accurate aluminium and high grade steel construction, compact construction surveying used holding M Prisms. Prism Holders. Retro targets Scanner Spheres, etc 2. Equipped with 3 strong Magnetic Bars(Ndfeb) 1pcs dia 10*40mm and 2pcs dia 10*25mm securely embedded into L-shape Alloy Aluminum construction project surveying like railway subway, bridges, etc 3. height to the Centrecircular prism 125mm 4. Installed w . Leica-style Adapter ADP8-12ST M8 male Thread to Da12+0. 02 Leica-style Stubspigot compatible with all Leica-style Prisms, Prism Holde and Retro Targets suc GHP1 GHP3 GHP1P GRP113 GRZ4 GRZ12 MPR122 etc 5 . Coming w on-board Circular Bubble CB-4040 / 2mm adjustable Circular Vial for quick aligning and positioning 6 . Customization service available Features 1 . Magnetic Rail Shoe ( Monitoring Prism Mount ) 2 . w . Leica-style Spigot ( Dia 12mm ) 3 . w Circular Vial ( 40 / 2mm ) 4 . W Triple Magnetic Bars Ndfeb 5 . For Railway Surveying ( Reflector Prisms)
China factory supply metric Feeler Gauge set railway maintenance tools Place of Origin Hubei, China Type Measurement Material Carbon Steel Brand Name Linkage Blade thickness: 0.01,0.02,0.03,0.05,0.07,1.0mm Weight: 135g Packaging and delivery Packaging Details PE bag+pe foam+paper carton box/wooden case/alluminium case or as customer required
The Rail Rerailer Device is made of high-quality cast steel,consisting of left and right Rail Rerailer Device bodies,screws,and locking pins. It is suitable for trains on 60kg/m rail lines,which can be used to realign the derailed wheels caused by accidents.The Rail Rerailer Device is used to re-enter the track along the guide rail surface of the rerailer with the help of the locomotive's own power through the wheel tread and rim,thus achieving the purpose of self-rescue Place of Origin Hubei, China Type Railway maintenance equipment Material Stainless Steel Dimensions (L x W x H) (mm) 300*300*150mm Brand Name Linkage Type Railway tools Usage railway track maintenance Product name Railroad rerailer Application Railway maintenance Standard CRCC Color customized Suitable can be used for different kind of rail Certificate CE Warranty 1YEAR Customized Yes Packaging and delivery Port Shanghai Supply Ability Supply Ability 500 Unit/Units per Month
Place of Origin Hubei, China Type railway hydraulic tools Material Stainless Steel Dimensions (L x W x H) (mm) 1050*500*400mm Brand Name Linkage Type railway tools Usage Track gauge regulator Application adjustment of track gauge Driving force 15KN Route 30mm Standard CRCC Approved ISO Certificate CE Warranty 1YEAR Customized Yes Packaging and delivery Port Shanghai Supply Ability Supply Ability 500 Unit/Units per Month
Gantry Crane Rail Changer This equipment is suitable for the old and new switching operation of rail, switch rail and frog point rail. There are running wheels in the center of both sides, which can be carried out during transportation. It has the characteristics of adjustable height, lateral adjustment, locking, light weight, convenient handling and wide application range. The equipment can be equipped with section rail transport trolley, rail transport, switch rail and frog point rail operation trolley. The wheels are nylon wheels with good insulation performance and equipped with brake device. It is safe and reliable with light weight and high operation efficiency. It is an ideal special tool for rail transport in construction operation of Railway Public Works Department. 2.� Main� Technical� Parameters Rated load � 1T (one group) Load-bearing 500kg Stroke length � 1M Overall dimension 2410*700*1540mm Weight (one set) � 97 kg Single unit weight � â?¤23 kg Trolley weight 28 kg 3.� Basic� Structure� and� Working� Principle Working Principle: The rail gantry crane adopts the principle of gear and rack, and the gear side is equipped with safety insurance, which can avoid reverse rotation when the gravity is large, so as to prevent danger. The rail can be lifted by connecting the rail clamping hook at the bottom of the rack. Release the locking handle, and then push the rail lifting device through the guide rail of the fixed frame to realize the lateral movement. The whole frame structure is adopted for the section rail transportation trolley, and nylon running wheel is set at the bottom, which has good insulation performance. The brake pad is set inside the wheel, and the running wheel can be braked through the handle cable. Basic Structure: The rail gantry crane is composed of column (support frame), cross beam, rail hook, rack, operating handle, locking handle, locating pin, safety hook, etc. The trolley is composed of running wheel, brake pad, brake cable, brake handle, pushing handle, rack, locking plate, etc
Hydraulic Rail Lifting and Lining Machine The� Rail Lifting and Lining Machine� has the fuction of ifting and lining. Its structure is simple, light, flexible, safe and reliable. This machine is powered by Honda GX390 petrol engine, drives gear pump, and controls the work of each cylinder by multi-way reversing, valve, so as to realize the movement of machine in place, hook rail, tilt and lift. BENEFITS When the two lifing cylinders stand upright, the lifing operation can be carried out When a lifing cylinder is tited out, the track can be dialed Adopt Honda GX390 gasoline engine as the power,the rail hook device adopts gear-engaged double hook synchronous rail clamping mechanism. The starting, cylinder, rail hook cylinder, traveling cylinder, and tilt cylinder are all hydraulicaly controlled. SPECIFICATION Engine Honda GX390, 6.6 kW Max. lifting force 150 kNx2 Max. lining force 130 kN Max. lifting stroke 1020 mm Max. lining stroke â?¥310mm/time System pressure 20 MPa Operation handle working force â?¤200N Dimensions 1760x900x1500 mm Weight 550 kg Size 1760x900x1500 mm
Double-hook Hydraulic Rail Straightening Device Hydraulic Switch Rail Bending Machine Switch Rail Bender This machine is used for the bending operation of railway seam lines and welded joints of seamless tracks and other low-collapsed parts of steel rails. It can also be used as vertical bending and supporting equipment in the laying of seamless tracks; suitable for all types Rails. The machine has simple structure, convenient operation, safe operation and easy maintenance. It is an effective tool for rectifying rail joint problems TECHNICAL DATA Max. bending force� 900 KN Hydraulic system pressure� 47 MPa Working stroke� 120 mm Pivot point distance 1200 mm Dimension  1435x696x 385 mm Weight  185 kg
Welding and Track Maintenance Equipment Gas Pressure Rail Welding Machine Hydraulic rail weld trimmer/Hydraulic Rail shear It's A Special Small Size Machine Suitable For Shearing Thermit Weld Seam.Hydraulic Opreation,Save Labour,Shearing Clean. It's Suitable For Dealing With Various Rails (50-75kg/M) At The Depot Or On The Track. It's An Accessory Tool In Cwr Laying Project, Rail Stress Releasing Operation And Broken Rail Repair.HWS-II Hydraulic Rail Trimmer Is Mainly Composed Of Machine Frame, Manual Pump Station, Two Horizontal Oil Cylinders, Guiding Device, Shearing Knife, Etc,. While Working, Ride The Machine On The Rail (At The Both Side Of The Seam), Place The Guiding Device Nearby The Rail Jaw, Then Swing The Manual Pump Handle Back And Forth. Along With The Cylinder Piston Rod Reaching Out, The Shearing Knife Makes Relative Motion To Produce Shear Force And Remove The Seam Bead.
Welding and Track Maintenance Equipment Gas Pressure Rail Welding Machine Hydraulic rail weld trimmer/Hydraulic Rail shear Itâ??s A Special Small Size Machine Suitable For Shearing Thermit Weld Seam.Hydraulic Opreation,Save Labour,Shearing Clean. Itâ?? S Suitable For Dealing With Various Rails (50-75kg/M) At The Depot Or On The Track. Itâ??s An Accessory Tool In Cwr Laying Project, Rail Stress Releasing Operation And Broken Rail Repair.HWS-II Hydraulic Rail Trimmer Is Mainly Composed Of Machine Frame, Manual Pump Station, Two Horizontal Oil Cylinders, Guiding Device, Shearing Knife, Etc,. While Working, Ride The Machine On The Rail (At The Both Side Of The Seam), Place The Guiding Device Nearby The Rail Jaw, Then Swing The Manual Pump Handle Back And Forth. Along With The Cylinder Piston Rod Reaching Out, The Shearing Knife Makes Relative Motion To Produce Shear Force And Remove The Seam Bead.
Railway Hydraulic Rail Tensor for Rail Stretching Hydraulic Rail Tensor Itâ??s suitable for 75kg/m and 60kg/m type rail stress relief and seamless long rail relaying. While operating in the field at a certain temperature range being lower than the rail locking temperature, by employing this machine, the length of a rail with zero-stress can be forced to stretch to a length at locking temperature, then re-lock the rail. SPECIFICATION Model YLS-900I Material Stainless Steel Dimensions (L x W x H) (mm) 1300*690*240mm Max. rated working pressure 57Mpa Max. rail pulling force 2*450kN Max. stroke of working cylinder â?¥500mm Two pull rod center distance 535mm Lock mode wedges clamp on both sides of rail head Pump model Honda GXV160 Power 3.05kW Rate of flow 3L/min Machine weight 283kg Internal combustion pump station weight 75kg (not including pipeline)
Place of Origin Hubei, China Type Rail Chamfering Tool Material Stainless Steel Dimensions (L x W x H) (mm) 180* 50*190mm Brand Name Linkage Max chamfer diameter 31~32 Max chamfer cutting torque Tmax = 10N * m Max moving forceh of handle rod Fmax = 55N (L = 180) Working efficiency 1 piece /10 seconds Overall size 180* 50*190mm Machine weight 1KG Packaging and delivery Packaging Details Pe bag+paper carton, 1 unit/Carton box, Carton box: 23* 10*24 cm, G.W: 1KG Selling Units: Single item Single package size: 23X10X24 cm Single gross weight: 1.000 kg Freya Fei
Place of Origin Hubei, China Type Rail Track Jack Material Stainless Steel Dimensions (L x W x H) (mm) 310*165*520mm Brand Name Linkage Model LJ-QD15 Rated top lifting force 147HN (15T) Rated hook lifting force 78kN Lifting stroke â?¥270mm Initial height 60mm Weight â?¤25kg Packaging and delivery Packaging Details Pe bag+paper carton, 1 unit/Carton box, Carton box:36*22*58 cm, G.W: 32KG Port Shenzhen Supply Ability Supply Ability 500 Unit/Units per Month
Place of Origin Hubei, China Type Rail Clamp Material Stainless Steel Brand Name Linkage Model LJ-JJQT Weight 6.5kg Packaging and delivery Packaging Details Wooden box export standard/ Woven bag+paper carton, 1 unit/Carton box, G.W: 6.5KG Selling Units: Single item Single package size: 60X60X60 cm Single gross weight: 6.500 kg
