The third generation low light level image intensifier is the core device of advanced low light level night vision system. Its typical technical features are high sensitivity response gallium arsenide photocathode and high gain, low noise microchannel plate electron multiplier. Its structural f eature is the use of double indium sealed proximity electron optical system. The third generation low light level image intensifier has important practical value in military and civilian applications such as observation, aiming, ranging, guidance, tracking and warning at night and other low illumination conditions. Negative Electron Affinity (NEA) GaAs photocathode 18mm third-generation tube can make full use of natural light at night. Under 10-3lx and lower photocathode illuminance, the third-generation low-light night vision is more sensitive and effective than the second-generation low-light night vision. application: Pilot Commander mirror Fire control night vision system Long range sight Astronomical observation Faint Light Research Low-light imaging Photon counting Safety detection system Features: High sensitivity High resolution High transfer function long life Inverted image sphere, inverted image plane, forward sphere, forward plane Close focus-low distortion Compact structure Adjustable gain and output brightness Can be used in complex environments such as high temperature, low temperature, vibration, shock, etc.
PU Sandwich Wall Panel Product description: the surface of the metal carved board/panels(metal engraved board/panels) is a high-quality metal plate overcoating with colored relief after special coating treatment, the middle layer is a hard high density polyurethane foam thermal insulation layer treated by flame retardant treatment, the underside is the aluminum foil protective layer which plays the role of thermal/heat insulation and moisture-proof. the wall panel has the characteristics of thermal insulation, waterproof and flame-retardant, light earthquake resistance, sound insulation and noise reduction, green environmental protection, beautiful and durable, and the assembly method of the board body is simple, convenient construction, and it is not limited by the season or environment, the four seasons are appropriate. Structure: Material of surface: the outer layer is a metal layer, which is pressed by a galvalume steel sheet (Containing 55% aluminum, 43% zinc) and is not rusted all year- round. the steel coating is coated with high-quality Nippon paint, which is durable and does not fade. Core material: the hard high-density polyurethane foam thermal insulation layer treated by flame retardant treatment, set heat preservation, fire-proof, moisture-proof, high hardness in one, which is incomparable with ordinary foam polyurethane. Material of bottom: the back of the metal carved board is the aluminum foil protective layer with excellent water-proof performance, which can effectively block the intrusion of water vapor into the board and build a wall, and reflect the heat source of the house to enhance the heat preservation effect.
Coffee Oak Straight Groove Flat Board PU Sandwich Wall Panel Product description: the surface of the metal carved board/panels(metal engraved board/panels) is a high-quality metal plate overcoating with colored relief after special coating treatment, the middle layer is a hard high density polyurethane foam thermal insulation layer treated by flame retardant treatment, the underside is the aluminum foil protective layer which plays the role of thermal/heat insulation and moisture-proof. the wall panel has the characteristics of thermal insulation, waterproof and flame-retardant, light earthquake resistance, sound insulation and noise reduction, green environmental protection, beautiful and durable, and the assembly method of the board body is simple, convenient construction, and it is not limited by the season or environment, the four seasons are appropriate. Structure: Material of surface: the outer layer is a metal layer, which is pressed by a galvalume steel sheet (Containing 55% aluminum, 43% zinc) and is not rusted all year- round. the steel coating is coated with high-quality Nippon paint, which is durable and does not fade. Core material: the hard high-density polyurethane foam thermal insulation layer treated by flame retardant treatment, set heat preservation, fire-proof, moisture-proof, high hardness in one, which is incomparable with ordinary foam polyurethane. Material of bottom: the back of the metal carved board is the aluminum foil protective layer with excellent water-proof performance, which can effectively block the intrusion of water vapor into the board and build a wall, and reflect the heat source of the house to enhance the heat preservation effect. Installation: Step 1:Flick the ink line. Step 2:Keel installation (install the keel according to the design, the spacing is between 40-70cm). Step 3:Basic accessories installation. Step 4:Board connection base installation. Step 5:Internal corner parts base installation. Step 6:Board installation. Step 7:Board connection cover installation. Step 8:Internal corner parts cover installation.
High quality galvanized lightweight steel keel for partition and ceiling A light steel villa, also known as a light steel structure house, its main material is a light steel keel synthesized by a hot-dip galvanized steel strip through cold bending technology. after calculation and the support and combination of accessories, it can play a reasonable load, Power to replace traditional houses. with the country's emphasis on environmental protection, green and energy-saving buildings are bound to become the top priority in urban construction. with the accelerated pace of urbanization construction, the prospect of light steel structure buildings is very huge, which is a huge opportunity and challenge for both the construction industry and the steel industry. Roof system: It is composed of roof truss, structural OSB panel, waterproof layer, light roof tiles (most of which are asphalt shingles). Floor system: It is composed of cold-formed thin-walled steel frame or composite beams, floor OSB structural plates, supports, connectors, etc. Thermal insulation system: to ensure the thermal insulation effect, the thermal insulation materials used in the external walls and roofs of buildings (we can provide a variety of options according to customer requirements, but usually we use sound-absorbing glass wool, extruded plastic panels, etc.) It can be used for a long time and can keep warm and heat insulation. Wall system: It consists of wall frame columns, wall top beams, wall bottom beams, wall supports, wall panels, and connectors.
Three Color Bluestone Brick PU Sandwich Wall Panel Product description: the surface of the metal carved board/panels(metal engraved board/panels) is a high-quality metal plate overcoating with colored relief after special coating treatment, the middle layer is a hard high density polyurethane foam thermal insulation layer treated by flame retardant treatment, the underside is the aluminum foil protective layer which plays the role of thermal/heat insulation and moisture-proof. the wall panel has the characteristics of thermal insulation, waterproof and flame-retardant, light earthquake resistance, sound insulation and noise reduction, green environmental protection, beautiful and durable, and the assembly method of the board body is simple, convenient construction, and it is not limited by the season or environment, the four seasons are appropriate. Structure: Material of surface: the outer layer is a metal layer, which is pressed by a galvalume steel sheet (Containing 55% aluminum, 43% zinc) and is not rusted all year- round. the steel coating is coated with high-quality Nippon paint, which is durable and does not fade. Core material: the hard high-density polyurethane foam thermal insulation layer treated by flame retardant treatment, set heat preservation, fire-proof, moisture-proof, high hardness in one, which is incomparable with ordinary foam polyurethane. Material of bottom: the back of the metal carved board is the aluminum foil protective layer with excellent water-proof performance, which can effectively block the intrusion of water vapor into the board and build a wall, and reflect the heat source of the house to enhance the heat preservation effect. Advantage: 1. Heat preservation and heat insulation 2. Fire and flame retardant 3. Waterproof and moisture-proof 4. Sound insulation and noise reduction 5. Efficient construction 6. Environmental protection and durability 7. Shock resistance and crack prevention 8. Strong decoration
Compound Cone Crusher Compound Cone Crusher, widely used in the industries of metallurgy, building material, road construction, chemical engineering & silicate, is suitable for crushing all kinds of ores and rocks with medium or above hardness. Compound Cone Crusher is divided into standard type and short-head type. Generally speaking, the standard type has big feeding granularity and relatively coarse discharging granularity, and the short-head type has steep crushing cone and small feeding granularity which is conducive to producing fine particle materials, for this reason,the standard type compound cone crusher is generally used for coarse and medium crushing and the short-headed type compound cone crusher is generally used for medium and fine crushing. Compound Cone Crusher Features: It has unique hydraulic clearing system,hydraulic opening adjusting function,easy for changing movable and fixed plate,decreasing management and maintenance cost. It is widely used for medium and fine crushing of granite,basalt,cobble,cobblestone,iron ore etc, which is well received by customers. Working Principle : Cone crusher when working, the motor drives the eccentric bearing via the spring coupling, the transmission shaft and a couple of cone gear wheels. The crushing cone axis is forced to swing by the eccentric bearing bushing, which makes the mantle sometimes close to the bowl liner, and sometimes far away from the bowl liner. The raw materials are pressed, impacted and finally crushed in the copper.
Impact Crusher Overview: Impact crusher, a kind of new type high efficiency crusher machine, is generally used in the secondary crushing and can be widely applied to the industries of highway, railway, mining and metallurgy. It can be used in crushing of raw materials whose comprehensive strength is no more than 320 Mpa, such as limestone, granite, gypsum, etc. Impact Crusher Features: 1.Uniformly broken multi-cavity, improving production capacity and saving energy; 2.High chromium new type wear-resistant blow bar, unique toothed impact plate; 3.Shape optimizing function makes the final product cubic; 4.New Design of low speed and multiple crushing cavities sets the rotary speed down by 20-25% and obtain high production capacity under lower energy consumption. Working Principle : Impact crusher utilizes the impact energy to crush materials. Under the drive of motor, the rotor, with the blow bars, keeps in the high-speed rotation. When the materials fall into the affecting area of rotor, They will be stroke by blow bars and be thrown to the impact devices. Then the materials are rebounded to the working area of rotor for crushing again. The high speed forces the material to rebound from the impact liner to the area where the blow bar effects until they have been crushed to the required size. The gap between the impact rack and the rotor can be adjusted to change the size and shape of the finished product.
Equipment Summary and features Can Use for 5 Gallon(20kg) Barrel packaging Iron and plastic barrels Suitable for 10,000-1,000,000cps high viscosity liquid Equipped with high pressure special valve to realize high viscosity liquid precision dispensing and greatly improve production and glue quality Use the liquid within one month after the packing is opened Motor power:400W Rotor diplacement: 1.5/3/6cc Maximum delivery pressure: 80 kg Repeated precision: +- 2% Maximum glue dispensing volume: 5ml/sec Rated voltage: AC 220V Minimum glue dispensing amount: 0.005ml/sec Rated frequency: 50HZ Rated power: 500W Rated pressure:0.6MPA PMP-20 screw pumps are suitable for low, medium high viscosity or abrasive liquids such as silica gel, epoxy, grease, heat conducting gel, UV, etc. The 5 gallon / 20L barrel is used, and the pressure plate sealing method is adopted to facilitate the use and replacement of glue. The stator and rotor are driven by the servo motor to ensure the realization of precision measurement, and solve the problems of glue breaking, unstable glue amount and uneven lines caused by the unstable pulse and air pressure of the traditional pneumatic piston pump. The servo screw mode can be used in all dispensing processes such as bonding, fixing, potting, bottom filling, plane sealing or double liquid dispensing Solve the problems of unstable pressure in pneumatic glue supply and transportation mode and unstable pressure caused by the change of rubber barrel affected by resistance, which affects the repeated accuracy of dispensing Solve the pulse instability caused by pneumatic or cylinder and piston rubber supply and transportation The equipment is equipped with a special servo drive controller with its own touch screen. Adjust the glue amount through the working speed function item. The larger the value is, the larger the glue amount is (the minimum is 0.005ml, the maximum is 5ml / sec, and the size can be customized)
Buy Roland VersaStudio BN-20 at Asoka Printing with cheap price, best quality guaranted, international warranty. Price : USD 3,000.00 Product : Available & 100% New Original Shipping : FedEx / DHL / ups Lead Time : 6 - 9 Days Airport : Kualanamu International Airport Terms : Wise, Bank Transfer, Western union, Moneygram & Xoom Product Description Distinguishing Features Compact 20-inch inkjet with integrated printing and contour cutting A versatile machine for printing t-shirt graphics, decals, stickers, signs, posters and more Ink options include CMMYK, CMYK+White and CMYK+Metallic Silver Legendary Roland reliability for continuous, economical production Take Control of Cutting Combined with 300 gram cutting capability, the integrated contour cutting of the BN-20 is consistent and virtually eliminates common problems inherent in drag knife technology with simple up/down electronic controls. Ingenious cutting carriage technology prevents bounce against the media if the force is set too high for the substrate. Low Maintenance Cost, High Reliability Built with Rolandâ??s legendary reliability, the BN-20 features a gold-plated head to reduce static and prevent clogging and a patent-pending wiper system to decrease wear and tear on the print head and prolong its life by reducing buildup. A patent-pending automated Ink Circulation System reduces waste, for dramatically lower running costs while ensuring exceptional image quality over the long term.
Spill Containment Pallet Introduction: The Spill Containment Pallet is a polyethylene leakage holding tray which can control leakage and has its own leakage holding tank. Material: the Spill Containment Pallet is made of 100% durable high-density polyethylene. Production process: the Spill Containment Pallet adopts rotational molding process, seamless structure design, and the leak proof structure 100% passes the test. The tray can avoid leakage. Color: Yellow / custom. Scpecification: There are many existing specifications for Spill Containment Pallet according to the place of use and function. Support customization according to requirements. Spill Containment Pallet Characteristics: The crimping design around the Spill Containment Pallet can play the role of anti-collision and anti cracking. Spill Containment Pallet has a large capacity leakage storage tank. Spill Containment Pallet has single drum, 2 drum, 4 drum and other specifications. Each Spill Containment Pallet can be used alone or combined with multiple other containment platforms, so as to form a work platform area with diversified needs. Spill Containment Pallet can be used together with the slope, making it easy, fast and simple to move the chemical storage barrel up and down. Spill Containment Pallet has a high-strength, movable and removable leakage isolation plate, which is convenient for disassembly and cleaning, and can also be replaced. Spill Containment Pallet can become part of the factory floor, saving space, improving safety and efficiency, and making it easier to move oil drums and chemical drums up and down. The heavy-duty high-strength anti-skid grid on the surface of the Spill Containment Pallet platform forms a stable base, which increases the friction on the grid surface and makes it safer to walk on the platform surface. Spill Containment Pallet is equipped with drain holes and drain plugs. Once the contained liquid reaches a certain amount, the drainage hole can discharge the liquid. Most of the leaked liquid can be reused directly.
1. Using new electronic circuits, equipped with high-speed CPU and special chips, it can quickly obtain accurate weighing results. 2. Multi-level digital filtering and compensation technology to optimize the weighing performance of the balance under different weighing conditions. 3. Dynamic temperature compensation, real-time correction of the impact of ambient temperature fluctuations on the measurement results. 4. Green and environmentally friendly design, using environmentally friendly and safe materials, the power consumption is reduced by 50%, and the standby power consumption is 1W. 5. The standard five-sided glass windshield and anti-static base plate design can effectively avoid the influence of static electricity on the weighing results. 6. The clear and bright digital backlit display makes it easy to read in all working environments. 7. Front level adjustment feet and level indicator are convenient to observe and adjust the level, and ensure the level state at all times. 8. The large tare key is designed to facilitate the user's weighing operation. 9. SmartTrac dynamic graphic display, which directly displays the weighing range used by the balance. 10, 1/10d readability reduction function, quickly obtain stable weighing results. 11. Key-triggered automatic internal or external weight calibration to ensure accurate weighing results are always obtained. 12. The balance frame is equipped with a plastic protective cover as standard to avoid corrosion of scattered samples and damage to the balance surface. 13. Customer fine-tuning function (ADJ.CF), which enables you to adjust the built-in calibration weight value with your own calibration weight. 14. Hereinafter referred to as the hook design, to meet the special application requirements of customers. 15. Built-in RS232 communication interface, which is convenient to connect peripheral devices such as printers and computers.
pvc welding machine for stretch ceilings ,this machine is we design for Russian customer ,for electrode could change to 650mm length also cost is no high ,one economic type of machine . Also could change machine to singale head for request . Timing continued electrical control, especially for difficult alignment products welding,also can choose pneumatic devices according to the needs of pressure. High frequency welding machine designs the principles of toggle leverage. PVC welding enables uniform pressure, high frequency machine severity of head pressure can be adjusted to match the needs of high-frequency welding depth. High frequency (HF) welding method (otherwise known as radio frequency ) is usually often applied whenever PVC and PU products have to be welded. Common products manufactured with HF welding method are tarpaulins, tents, ceilings, advertising outdoor banners, waterbeds, inflatable boats, drip and blood bags, tensile structures, conveyor belts, rain clothing, etc. SPECIFICATION FOR STRETCH CEILING FILM WELDING MACHINE Model: GP3.2-K5/GP3.2-K9 Usage power: 220V 50-60Hz HF Power: 3200W Oscillation tube: 7T62 Max pressure: About 180kg Pressure mode : Pneumatic or Pedal way Max distance of electrodes: 130mm Working plate: 380*700mm Electode holder: Could be 650mm length Temperature Range: 0-300 Degree Adjustable Welding time: 0.01-9.99 seconds Adjustable Production : Equal or less 5000 times / 8H Net weight of machine : About 350kg
china cnc wood turning lathe Wood CNC Router Double Table Panel Processing CNC Router with Mechanical safety standards, in line with national safety standards, in line with national safety and health regulations. The equipment has good and comprehensive safety protection measures. Advantages of SuperStar Woodworking CNC Router Machine 1. Stable structure: thick-walled square tube welding, side plate tempering treatment, the bed is processed by the five-face milling machining center, aging treatment, firm and non-deformation. 2. Modular structure design, simple and safe operation mode to ensure the speed and accuracy of operation. 3. Linear automatic tool change system with a tool magazine capacity of 12 knives. 4. Vacuum adsorption table, high-power vacuum pump, air volume up to 350m3 / h for each vacuum pump. 5. Perfect lubrication system to extend the service life of the machine. 6. Using gantry type movement, can freely process the material on the work surface, easy to operate. 7. The Y-axis is driven by a dual motor to ensure smooth operation. 8. The X/Y axis adopts high-precision rack drive for high speed and high precision. 9. Z-axis adopts high-precision double-nut automatic anti-backlash ball screw drive with high precision. 10. The three-axis adopts a square linear guide to ensure the high precision of the machine and bear heavy load. 11. The wire uses imported high-flexible shielded cable Applicable Industry Cabinet Door Panels, Panel Furniture, Solid Wood Furniture, Indoor Composite Doors Function: Automatic Tool Change, Cutting, Milling, Hollowing, Slotting, Punching, etc. China CNC Router Manufacturer specializes in the production of fiber laser marking machines and automatic metal engraving machines. If you are interested in our products, please contact us as soon as possible.
Equipment introduction: 1. This pitting machine is produced by manufacturers with preferential prices. The equipment is made of stainless steel, with beautiful appearance and good performance, which meets the standard of food processing equipment. 2. The model 78 coring machine has the advantages of simple operation and wear resistance, and there will be no problems such as bent needle and broken needle in long-term use. Long service time. 3. This equipment uses silica gel cup to straighten the fruit and remove the core. 4. The needle is made of 304 stainless steel. The needle is firm and durable, there is no residue after enucleation, and the pulp does not change color. 5. Adhering to the principle of integrity-based and quality-oriented, the company manufactures products from manufacturers to ensure quality. Equipment features: 1. This new apple corer has strong wear resistance and is not easy to damage parts. 2. The base plate of this enucleator adopts silica gel cup, which does not damage the fruit. At the same time, it overcomes the danger of needle seat type and the weakness of complex tablet pressing operation. 3. The equipment has the characteristics of small enucleation pore size, more retained pulp, clean enucleation and no residual core. 4. A moving wheel device is installed at the bottom, which is convenient to move. At the same time, it is equipped with braking device, which is easy to fix. 5. The chassis is sealed with stainless steel, which is beautiful and generous. 6. The equipment is produced by manufacturers. Welcome new and old customers to inquire.
ANALYSIS REPORT OF SKIMMED MILK POWDER ADPI EXTRA GRADE General : Free flowing agglomerated powder with pleasant taste, creamy white. Physical-Chemical Characteristics PARAMTER UNIT STANDARD VALUE SAMPLE 1 ( 20.7.12) VALUE Moisture Percentage by Mass 4.0 MAX 3.26 Fat Percentage by Mass 1.25 MAX 0.74 Titrable Acidity (as Lactic acid) Percentage by Mass 0.15 MAX 0.11 Total Ash Percentage by Mass 8.20 MAX 7.92 Insolubility Index MI 1.25 MAX 0.1 Scorched Particals DISC B DISC A Protein Percentage by Mass 34 MIN 35.48 WPNI mg/g 1.51 TO 5.99 4.12 Bulk Density g/cc 0.52 Microbiological Characteristics PARAMTER UNIT STANDARD VALUE SAMPLE 1 ( 20.7.12) VALUE Standard Plate Count cfc/g 10,000 max 4500 Coliforms Cfu/g Absent cfc/g absent ABSENT E.coli Cfu/g Absent cfc/g absent ABSENT Salmonella spp Cfu/25g Absent cfc/ 25g absent ABSENT Shigella spp Cfu/25g Absent cfc/ 25g absent ABSENT S.Aureus Cfu/g Absent cfc/ g absent ABSENT Anaerobic sporeformers Cfu/g Absent cfc/ g absent ABSENT Listeria sp Cfu/25g Absent cfc/ 25g absent ABSENT Clostridium perfringens Cfu/25g Absent cfc/ 25g absent ABSENT STORAGE & HANDLING : Product can be stored for 12 months from date of manufacture. It should be stored and shipped in a cool, dry environment, below 250 DC. It should not be exposed to direct sunlight & shouldnot be in contact with walls or floor, so as to enhance shelf life.
ANALYSIS REPORT OF SKIMMED MILK POWDER General :- Free flowing agglomerated powder with pleasant taste. Physical-Chemical Characteristics PARAMTER UNIT VALUE Moisture Percentage by Mass 3.2 to 3.8 Fat Percentage by Mass 1.0 MAX Titrable Acidity (as Lactic acid) Percentage by Mass 1.3 TO 1.4 Total Ash Percentage by Mass 7.8 TO 8.0 Insolubility Index MI 1.0 TO 1.3 Scorched Particals DISC B Protein Percentage by Mass 35 TO 36 Test for neutralizer NEGATIVE Bulk Density g/cc 0.45 to 0.49 Microbiological Characteristics PARAMTER UNIT VALUE Standard Plate Count cfc/g 10,000 max Coliforms Cfu/g Absent cfc/g absent E.coli Cfu/g Absent cfc/g absent Salmonella spp Cfu/25g Absent cfc/ 25g absent Shigella spp Cfu/25g Absent cfc/ 25g absent S.Aureus Cfu/g Absent cfc/ g absent Anaerobic sporeformers Cfu/g Absent cfc/ g absent Listeria sp Cfu/25g Absent cfc/ 25g absent Clostridium perfringens Cfu/25g Absent cfc/ 25g absent PACKAGING : 25 Kg , HDPE bags with inner polyethylene bags liner. STORAGE & HANDLING : Product can be stored for 12 months from date of manufacture. It should be stored and shipped in a cool, dry environment, below 250 DC. It should not be exposed to direct sunlight & shouldnot be in contact with walls or floor, so as to enhance shelf life
Health benefits of refined coconut oil Prevent wrinkles, sagging skin, skin dryness, and flaking Reduces protein loss in hair and nourishes the hair Treats pancreatitis and Alzheimer's disease Prevent and effectively cures candida improve bone health Helps in easy digestion Strengthens immune system Prevents diseases affecting liver and kidney Effective in healing damaged tissues and infections Rich in lauric acid that helps maintain blood sugar and cholesterol levels SPECIFICATIONS: I. PHYSICAL CHARACTERS- VISUAL CHECKING Appear: Liquid, transparent, Homogeneous at 30oC, no impurities Ingredients: 100% coconut oil Color: Light yellow, natural color of product) Taste and flavor: Typical of coconut oil, no stranger flavor Foreign material: Not detected II. CHEMICAL STANDARD NO. ITEMS UNIT STANDARD 1 Free fatty acid (as lauric acid) % 0,1 2 Peroxide value Meq/kg 4 3 Iodine Value g/100g 10 4 Moisture and volatile matter content % 0,1 5 Impurities % 0.05 6 Color 5,25 inch Lovibond cell 0,7 R/7,0 Y 7 Saponification Value mgKOH/g 241-265 8 Slip melting point oC 23-26 9 Arsenic(AS) Mg/kg 0,1 10 Lead(Pb) Mg/kg 0,1 III, MICROBIOLOGICAL STANDARD NO. ITEMS UNIT STANDARD 1 Total aerobic plate count CFU/g
Greetings Mr. Receive a cordial greeting. It is to inform you about a proposal for the sale of Merey Api 16 crude of Venezuelan origin: � *Product:* Bituminous mixture 16 � *Type of business:* Cash sale. If the buyer has the proof of funds and the boat, it is possible to sign a long-term agreement. � *Quantity:* 4,000,000 bbl � *Price:* Brent Medium Plates - (). � *Conditions of sale:* FOB TAECJAA *Shipping Period*: Freight period will be assigned when buyer provides proof of fund and ETA. � *Additional cost:* $2 for a seller's representative. This consultation fee is not included in the discount price. *Product:* Bituminous mixture 16 � *Type of business:* Cash sale. If the buyer has the proof of funds and the boat, it is possible to sign a long-term agreement. *Quantity:* 4,000,000 bbl  *Price:* average Brent prices - ().  *Conditions of sale:* CIF TAECJAA *Shipping Period*: Freight period will be assigned when buyer provides proof of fund and ETA. � *Additional cost:* $2 for a seller's representative. This consultation fee is not included in the discount price. If this proposal is of interest to you, do not hesitate to contact me through this email so that I can expand any information you require and answer any questions you may have. Since I have direct contact with the representative of the company selling this hydrocarbon and some other hydrocarbon that is also of interest to them or the interest of the buyer. It should be noted that this sale of petroleum derivatives is with a company duly qualified and authorized by PDVSA respectively, to avoid problems. This company has all the updated documentation and sales history that can be shown for greater buyer confidence as long as it also shows documents that guarantee that it has the purchasing power and logistics necessary for this operation. Likewise, it should be noted that this company that markets hydrocarbon derivatives is in a position to carry out CIF and FOB procedures, as can be seen in the aforementioned proposal.
1.Five-year warranty.Bluetooth APP to monitor battery pack. 2.Applications.Maintenance Free & No Leakage: This battery is comprised of gel instead of liquid, so there is no maintenance required to keep the battery working properly. Manufactured with an advanced valve regulated technology, Renogy Deep Cycle Hybrid GEL Batteries save you from acid leakage and frequent maintenance 3.Extended Service Lifetime: Corrosion-resistant grids enable a design life of up to 12 years in standby applications and more than 750 charge/discharge cycles at 50% DOD in cyclic applications 4.Longer Shelf Life: Made of high purity materials, lithium batteries reduce the monthly self-discharge rate below 3%. No need to recharge the dormant battery frequently 5.Excellent Deep Discharge Recovery: Proprietary plate composition and patented gel electrolyte ensures excellent recovery capability after excessive deep discharge. This means that batteries can discharge more and still be recharged like new. Unlike lead acid batteries are not allowed to discharge too much 6.Install Them Anywhere: Maintenance free, no leakage, no toxic gas generation, vibration resistant, and stable performance at -20~60 temperature make Batteries able to be used in virtually any position. They can run in various systems, including RV,boat, yacht, motorhome, van, cabin, home backup power, and more
Is it in stock: Yes Certification: UL, ROHS, REACH Type: Polycarbonate PC Processing Method: Film Press Color: Black Model Number: pc-fr-020 Specifications: Any cutting according to customer requirements Trademark: Dan Mason Packaging: stretch film Yield: 10000000000 Detailed introduction of "fire retardant pc film pc-fr-020" Fire retardant PC film Fire retardant pc film pc-fr-020. The thickness of the pc film is between 0.125 and 1.0, with smooth and frosted surfaces, and there are coils and sheets. There are sheets and coils. The sheets are one by one, and the coil is a certain width and a length of several hundred meters long; The thicknesses are: 0.125, 0.175, 0.2, 0.25, 0.3, 0.375, 0.5, 0.7, 0.8, 1.0. Among them, 0.125, 0.175, 0.2, 0.25, 0.3, 0.375, etc. are mainly made of coils, while other thicknesses are mainly made of sheets PC sheet is mainly used in optical electronics, medical equipment, high-speed rail aviation, printing anti-counterfeiting, led display, automotive industry and electronics, electrical industry, liquid crystal display and industrial machinery parts, mirror plating, various signs, printing, membrane switch backlight Window lenses, special printing, helmets, signs, nameplates, protective covers, power system insulation, disk drive insulation, keyboard insulation, TV/monitor insulation, computer motherboard insulation, electronic components, electrical enclosures, switch panels and other electronic products , junction box and charger shell, automotive instrumentation and panel printing with flame retardant requirements, electronic packaging, luggage, sports equipment, instrument panels, auto parts, controller panels, membrane switches, electrical products, etc., optical accessories, optical display , flat panel display, high-speed rail aviation, medical equipment, lighting film, surgical light film, electrical panel, nameplate, protective mask, sun hat, sunglasses, mobile phone, mp3, mp4, dvd, etc.
