NOMENCLATURE: Common name hexaconazole (BSI, ANSI, draft E-ISO, (m) draft F-ISO) IUPAC name (RS)-2-(2,4-dichlorophenyl)-1-(1H-1,2,4-triazol-1-yl)hexan-2-ol Chemical Abstracts name (-a-butyl-a-(2,4-dichlorophenyl)-1H-1,2,4-triazole-1-ethanol CAS RN [79983-71-4] Development codes PP523; ICIA0523 (both ICI) PHYSICAL CHEMISTRY: Composition Tech. is >85% pure. Mol. wt. 314.2 M.f. C14H17Cl2N3O Form White, crystalline solid. M.p. 110-112 â?? V.p. 0.018 mPa (20 â??) KOW logP = 3.9 (20 â??) Henry 3.33 ?10-4 Pa m3 mol-1 (calc.) S.g./density 1.29 g/cm3 (25 â??) Solubility In water 0.017 g/l (20 â??). In dichloromethane 336, methanol 246, acetone 164, ethyl acetate 120, toluene 59, hexane 0.8 (all in g/l, 20 ). Stability Stable for at least 6 years at ambient temperatures. Stable to hydrolysis and photolysis in water. Formulations stable in sales containers for 6 months at 50 â??, and 2 years at ambient temperature.
PRODUCT DESCRIPTION Clove Leaf Oil is obtained by steam distillation from the leaves of Eugenia caryophyllata. PRODUCT NAME Common Name : Clove Leaf Oil Botanical Name : Eugenia caryophyllata Indonesia Name : Minyak Daun Cengkeh PART USED Leaves COUNTRY OF ORIGIN Indonesia STATUS 100% Pure and Natural Essential Oil No additives and preservative TYPICAL PROPERTIES Appearance : Clear Liquid Color : Yellow to Brown Odor : Spicy, Sweet and Charcteristic of Clove Specific Gravity : 1.025 â?? 1.065 @ 25oC Refractive Index : 1.527 â?? 1.535 @ 20oC dOptical Rotation : (-) 1.5o to (+) 1.5o Solubility : Soluble in 70% Ethanol (1:2 clear) GAS CHROMATOGRAPHY ANALYSIS Eugenol Acetate : Nd â?? 1.5 % Eugenol : Min. 73 % RECOMMENDED STORAGE CONDITIONS Product should be kept in an area that is clean, cool, dry area in a tight closed container and keep away from direct heat or light We really pay attention from the beginning ( the labors works and they package it ) until our goods perfectly ready to delivered. Term of Payment: (T/T) - 50% Down Payment after Signing Contract - 50% after release Bill of Lading (B/L)
1.Disperse dyes are nonionic dyes. So they are free from ionizing group. 2.They are ready made dyes and are insoluble in water or have very low water solubility. 3.They are organic coloring substances which are suitable for dyeing hydrophobic fibers. 4.Disperse dyes are used for dyeing man made cellulose ester and synthetic fibers specially acetate and polyester fibers and sometimes nylon and acrylic fibers. 5.Carrier or dispersing agents are required for dyeing with disperse dyes. 6.Disperse dyes have fair to good light fastness with rating about 4-5. 7.The wash fastness of these dyes is moderate to good with rating about 3-4. 8.Of all dyestuffs disperse dyes are of smallest molecular size. 9.Generally disperse dyes are derivatives of azo, anthroquinone, nitro and quinine groups. 10.They do not undergo any chemical change during dyeing. 11.In presence of nitrous oxide, textile materials dyed with certain blue and violet disperse dyes with an anthraquinone structure will fade. This is called gas fading of disperse dyes which is a defect of this dye.
There are 2 types of ginger to be grown in Vietnam including: Fat and thin. But fat ginger is exported with largest quantity. It is suited in the market needs. Gingerâ??s health benefits are well known, ranging from anti-inflammatory properties to help with digestive and cardiac health. Because of its wonderful taste it is often used in teas, smoothies, salad dressings, soups and syrupsâ??an easy medicine to take! Now Ginger farms have area of 100 ha, And we also league with farmers, buy their final products. Every month we have exported 25-30 containers over the world. There are Korea, Russia, UAE, EU, Singaporeâ?¦ FRESH OLD GINGER Code: YG1-TMT Size : 100 â?? 150 gram up, thin ginger 150 â?? 250 gram up, fat ginger Color : Yellow Taste : Acetic, sweet and hot Oil content : 1% min Features : Clean, fat root, shine Packing : 10-14 kgs/carton/mesh bag or 30kgs/net 14MTS/RF cont 20â??; 26 MTS/RF cont 40â?? or buyerâ??s request. Selected: Carefully, cleaned, no scratched Temperature: 5oC, ventilation: 85 % - 95 % Certificate: HEALTHY, PHYTO, HACCP, ISO, GAP Origin: Viet Nam
Basic Information Product Name FucoxanthinSynonym FUCOXANTHIN,Website:http://www.gihichemicals.com, CAROTENOID ANTIOXIDANT;(3S,3'S,5R,5'R,6S,6'R,8'R)-3,5,5',6-Tetrahydroxy-8-oxo-6',7'-didehydro-5,5',6,6',7,8-hexahydro-β,β-caroten-3'-yl acetate; (3s,3s,5r,5r,6s,6r)-hydro-5-dihydroxy -8-oxo-;beta,beta-carotene,3-(acetyloxy)-6,7 -didehydro-5,6-epoxy-5,5,6,6,7,8-hexa;3'-(acetyloxy)-6',7' -didehydro-5,6-epoxy-5,5',6,6',7,8-hexahydro-3,5'-dihydroxy-8-oxo-beta,beta-carotene;FUCOXANTHIN;(3S,3'S,5R,5'R,6S,6'R)-6',7'-Didehydro-5,6-epoxy-4',5',6,7-tetrahydro-3,3',5'-trihydroxy-,-caroten-8(5H)-one;all-trans-FucoxanthinProduct No GIHI-04Formula C42H58O6Molecular Weight 658.91CAS NO 3351-86-8EINECS  NO 686-524-6Density 1.09g/cm3Melting Point 166-168°CStructure Product QualityNo Item Specification 1 Appearance Yellowish to brown powder or oil 2 Water 0.5% max 3 Storage Store at room temperature
Calcium hydroxide Brand: jianshi Food grade calcium hydroxide is made from natural high quality limestone calcined directly, with high purity and whiteness, and each of its specification reaches the world advanced level. Calcium hydroxide is a kind of buffer agents, neutralization agents, firming agents.It also can be used as acidity regulator in milk powder (including milk powder of sugar), cream milk powder and its productions, baby foods. As processing agent, it can be used in all kinds of foods' processing, and the residual is unlimited. It can be used to make calcium supplement agents, such as calcium propionate, calcium acetate, etc. It also can be used in beer, cheese, cocoa and chocolate products and konjac foods, sugar, water processing etc. Specification Items Specifications : , , description A white, dry free flowing powder, assay ( ca(oh)2) 96.5%, carbonate salts Qualified, magnesium and alkali salts 0.9%, acid-insoluble substances 0.09%, arsenic( as) < 2mg/kg, fluoride(f) 13mg/kg, lead(pb) < 2mg/kg, head metals (as pb) < 10mg/kg, loss on drying 0.08%, particle size(0.045mm, 325meshes) 99.8%, conclusion: this product conforms to requirements of standard gb25572., , ,
Delrin balls (acetal resin-pom) Plastic sphere balls Φ1.588mmâ??î¦100mm Color:white delrin balls, other color can be customized Surface:smooth pom balls;polished delrin balls G0-g3 (â±0.01-0.05mm) It is similar to nylon, but slightly harder than nylon, slightly larger than the density recommended products applied to the required low water absorption Pom ball table and drawer slide device is typically used, bearings, rollers, valves, and electronic apparatus, sailing apparatus. Faq: Q1. Can i have a sample order ? A: yes, we welcome sample order to test and check quality. Mixed samples are acceptable. Q2. What about the production time? A:sample needs 3-5 days, mass production time needs 2-3 weeks for order quantity more than, q3. How do you ship the goods and how long does it take to arrive?, a: we usually ship by dhl, ups, fedex or tnt. It usually takes 3-5 days to arrive. Airline and sea shipping also optional., q4. How to proceed an order ?, firstly let us know your requirements or application., secondly we quote according to your requirements or our suggestions., thirdly customer confirms the samples and places deposit for formal order., fourthly we arrange the production., , , ,
Model no.12s002 Sticker materialeva Sticker size1200*1200mm Clock materialsilver plated iron Clock diameter12cm Clock hands length40cm Clock movementce certified young town movement Packingcolorful carton box Packing size13.5*9.5*45cm Gross weight0.6kg Carton sizeqty. :20 set Gross wt. 12kg Carton size:69.5*42*42.5 cm Carton weight12kg Customer designavailable Customer logoavailable Oemyes Warrantyone year Lead time3-10 days based on different order quantity Package detail: Sticker material:eva foam (ethylene vinyl acetate) Clock material:metal Hour hand:31.5cm/12.4"3" Clock machine:12cm/ 4.9" The minimum achieving is:63cmx 63cm/ 24.8" x 24.8". The clock final decoration size is decided by how you want todecorate you walls. About max3 factory original design hi-quality pictures for your website catalogue come with your order Max3 is the professional wall art sticker wall clock manufacturer, such as removable vinyl wall sticker clock , 3d wall sticker clock , diy kids room wall sticker clock , poster wall clock , promotional gifts table clock. All these are hundreds designs available for you, and very unique for business promotional gifts or home and office decoration!
flunixin meglumine CAS NO. 255-836-0 Mp 137 ~ 140 â?? Properties:white or almost white crystalline powder, odorless, hygroscopic, the product is dissolved in water, methanol, ethanol, almost insoluble in ethyl acetate Application:Veterinary anti-inflammatory analgesic Flunixin Meglumine is White or off white crystalline powder, easily soluble in water, ethanol and methanol, nearly insoluble in ethyl ester and chloroform. Application: Flunixin Meglumine is a specific analgesic, antipyretic and anti-inflammatory drug. Flunixin Meglumine is an effective nonnarcotic and non-steroidal anodyne and mainly used for inflammation and ache(stenocardia) of large animals which caused by muscle abnormality, and cures for respiratory disease and eyes surgery of horses etc. Meanwhile, Flunixin Meglumine also can coordinate with other antibiotic drugs to cure for the diseases that caused by endotoxin of cattle and fowl. Flunixin Meglumine is mainly made for injection, used for animal body. Flunixin Meglumine has the advantages of nice curative effect and low toxicity.
Nomenclature:Common name dimethomorph (BSI, draft E-ISO); dime homorphe ((m) draft F-ISO)IUPAC name (E,Z)-4-[3-(4-chlorophenyl)-3-(3,4-dimethoxyphenyl)acryloyl]morpholine Chemical Abstracts name (E,Z)-4-[3-(4-chlorophenyl)-3-(3,4-dimethoxyphenyl)-1-oxo-2-propenyl]morpholine CAS RN [110488-70-5] EEC no. 404-200-2 Development codes CME 151 (Celamerck); SAG 151; WL 127 294 (Shell); AC 336379; CL 183776; CL 336379 (all Cyanamid); BAS 550F Physical Chemistry:Composition (E)- to (Z)- ratio is c. 1:1. Mol. wt. 387.9 M.f. C21H22ClNO4 Form Colourless to off-white powder to crystals. M.p. 125.2-149.2 ; (E)- isomer 136.8-138.3 ; (Z)- isomer 166.3-168.5 V.p. (E)- isomer 9.7 ´ 10-4 ATXht981131 mPaATXht0 ; (Z)- isomer 1.0 ´ 10-3 ATXht981131 mPaATXht0 (both 25 ) KOW logP = 2.63 (E)- isomer; 2.73 (Z)- isomer (both 20 ) Henry (E)- isomer 5.4 ´ 10-6 Pa m3 mol-1; (Z)- isomer 2.5 ´ 10-5 Pa m3 mol-1 S.g./density Bulk density 1318 ATXht981107 kgATXht0 /m3 (20 ) Solubility In water 81.1 (ATXht981151 pHATXht0 5), 49.2 (ATXht981151 pHATXht0 7), 41.8 (ATXht981151 pHATXht0 9) (all in ATXht981123 mgATXht0 /l, 20). In n-heptane 0.12 (E), 0.053 (Z); xylene 22.2 (E), 6.4 (Z); 1,2-dichloroethane 182.5 (E), 92.5 (Z); ethyl acetate 46.6 (E), 9.5 (Z); acetone 105.6 (E), 18 (Z), methanol 33.5 (E), 7.5 (Z) (all in ATXht981123 mgATXht0 /l). In n-hexane 0.11, methanol 39, ethyl acetate 48.3, toluene 49.5, acetone 100, dichloromethane 461 (all for (EZ), in ATXht981123 mgATXht0 /l). Stability Hydrolytically and thermally stable under normal conditions. Stable for >5 years in the dark. The (E)- and (Z)- isomers are interconverted in sunlight. pKa -1.305 (ATXht98124 calc.ATXht0 ) F.p. Not flammable
Die Cut Double Sided EVA Foam Tape Into Any Size Descriptions: The EVA foam tape is EVA foam coated with adhesive one sided or two sided.EVA (Ethyl Vinyl Acetate) foam is a closed cell, chemically cross linked, (and non-cross linked) foam, made from ethyl vinyl acetate copolymers. It is made in block (bun) form, or extruded and is available in a range of densities (molecular weights) and hardnesses. EVA foam tends to be a good thermal insulator, excellent shock absorber and is resistant to attack from chemicals and fuel based products. Its closed cell structure makes it impervious to water. EVA foam is an extremely versatile product suiting a broad range of different uses and applications. It is an effective replacement for many materials including felt, neoprene, natural rubber, polyurethane foam, pvc foam, wood composites, mineral wool and fibreglass. Features: Impact and vibration absorption. Weather and chemical resistance including splash resistance to oils and fuels. Acoustic and thermal insulation properties. Buoyancy with low water absorption. Suitability for thermo-forming and thermo-moulding. Applications: Health Care; Splinting, Cervical Collars, Orthopaedic Shoes, Insoles, Exercise Mats, Orthotic Supports, Packaging, Cushion Packaging. Foam; Corner Pads, Case Inserts, Display Packaging Foam. Sports & Leisure; Trampoline Pads, Buoyancy Aids, Kickboards, Sports Mats, Body Protection, Canoe Seats, Toys and Games, Camping Bedrolls. Footwear; Wedge Soles, Runner, Top Line Padding, Moulded Soles, Orthotics. Appliances; Gaskets, Vibration Pads. Automotive; Gaskets and Seats, Carpet Underlay, Headliners, Interior Padding. Building; Nail Washers, Expansion Joints, Glazing Seals, Eaves Fillers, Impact Sound Deflect, Insulation. Marine; Deck Tread, Life Jackets, Life Buoys, Fenders, Oil Boom Floats, Cockpit Cushions. Electronics; Work Station Mats, Shock Absorbing Pads. OEM Size:Special length, thickness or combinations can be supplied per customer's request.Products can be supplied in roll, tape,sheets or shapes per customer's request.Only you provide the CAD drawing,we can die cut any size for you. Shelf Life: To obtain best performance, use this product within 12 months from date of delivery and store under normal conditions of 60 ºC to 80ºF (16 ºC to 27ºC) and 40 to 60% R.H. in the original carton
Flavor/fragrance : isoamyly acetate and isoamyl alcohol.
Closed Circuit Cooling Tower Closed circuit cooling tower (also known as an evaporative air cooler or closed cooling tower) is the tubular heat exchanger placed in the tower, through the circulation of air, spray water and circulating water heat exchange to ensure the cooling effect. AUVC not only provides different shapes of cooling towers used in industries, such as round shape cooling towers and square cooling towers, but also offers closed cooling towers and open circuit cooling towers as well. The type of closed circuit cooling tower is widely used in iron and steel metallurgy, power electronics, machining, air conditioning system and other industries. How do closed circuit cooling towers work? Closed-circuit cooling towers make it possible to separate the evaporative circuit from the process circuit (customer circuit). A stainless-steel plate heat exchanger attached to the cooling tower, in its dedicated room, allows a glycol-free operation, and a simplified and unequalled ease of maintenance. The closed circuit cooling tower works as follows On the process side to be cooled (customer loop), the water to be cooled enters a plate heat exchanger connected to the tower and is cooled and discharged. The primary loop is closed and never comes into contact with air. On the secondary side of the cooling tower, the water is sucked out of the pool by a pump and circulated through a stainless steel plate heat exchanger. The water leaving the exchanger is piped to the top of the unit. This water is graded and evenly dispersed over the exchange surfaces by dispersers (also known as water distribution nozzles). Air driven by fans (axial or centrifugal) enters from the lower part of the cooling tower, is heated and saturated with water and exits from the upper part, passing between the exchange surfaces. Under the effect of the surface tension of the filler ladder, the water spreads uniformly and flows away over the entire height of the tower. The exchange surface is thus increased. The water cooled by forced ventilation falls freely into an inclined pool located at the bottom of the unit. Types of Closed Type Cooling Tower
Closed Circuit Cooling Tower Closed circuit cooling tower (also known as an evaporative air cooler or closed cooling tower) is the tubular heat exchanger placed in the tower, through the circulation of air, spray water and circulating water heat exchange to ensure the cooling effect. AUVC not only provides different shapes of cooling towers used in industries, such as round shape cooling towers and square cooling towers, but also offers closed cooling towers and open circuit cooling towers as well. The type of closed circuit cooling tower is widely used in iron and steel metallurgy, power electronics, machining, air conditioning system and other industries. How do closed circuit cooling towers work? Closed-circuit cooling towers make it possible to separate the evaporative circuit from the process circuit (customer circuit). A stainless-steel plate heat exchanger attached to the cooling tower, in its dedicated room, allows a glycol-free operation, and a simplified and unequalled ease of maintenance. The closed circuit cooling tower works as follows On the process side to be cooled (customer loop), the water to be cooled enters a plate heat exchanger connected to the tower and is cooled and discharged. The primary loop is closed and never comes into contact with air. On the secondary side of the cooling tower, the water is sucked out of the pool by a pump and circulated through a stainless steel plate heat exchanger. The water leaving the exchanger is piped to the top of the unit. This water is graded and evenly dispersed over the exchange surfaces by dispersers (also known as water distribution nozzles). Air driven by fans (axial or centrifugal) enters from the lower part of the cooling tower, is heated and saturated with water and exits from the upper part, passing between the exchange surfaces.
4 STEEL WIRE SPIRAL HYDRAULIC HOSE DIN EN 4SH Construction: Hydraulic Hose Tube: Oil resistant synthetic rubber,NBR. Reinforcement: Four high tensile steel wire spiral layers. Cover: Abrasion and weather resistant synthetic rubber, MSHA accepted. Temperature: -40 to +125 Introduction: We have a large hydraulic hose range in the market, which are available with the most abrasion-resistant covers. As marketing-leading hydraulic hose manufactures, we offer a a range that can deliver high performance and can withstand the harshest working environments. Our hoses are designed to perform in both high and low temperatures and pressures and are suitable for a variety of applications. Each of our hydraulic hoses are also in compliance with stringent industry standards such as SAE 100 and DIN.We also have ISO and MSHA certificate. Hydraulic Hoses are used for high pressure fluid power applications on mobile and fixed machinery. Our reinforced hoses can fit a wide variety of adapters and fittings.Our hydraulic hose is designed for use with petroleum- and water-based hydraulic fluids. Can handle gasoline, diesel fuels, mineral oils, glycol, lubricating oils and more. Hydraulic hoses handle high pressures in a wide range of fluid-power applications. From agriculture and manufacturing to all variety of heavy equipment operations, Manufactured to meet all applicable SAE specifications, Sinopulse hydraulic hoses are an affordable alternative to other brand hoses.We can also make hydraulic assembly for customers. Our Finished Assemblies are lengths of hydraulic hose with crimp fittings pre-attached. Customize the type of hose, length, and fitting to create the perfect assembly for your project.
SAE 100 R13 steel wire spiraled hydraulic hose is suitable for delivering petroleum-based hydraulic oils and it is also mainly used in high pressure working conditions.Specification: (1)Dash:R13-12 (2)I.D. Inch:3/4 mm:19.1 O.D. mm:31.8 (3)PSI:5075 SAE 100 R13 steel wire spiraled hydraulic hose is suitable for delivering petroleum-based hydraulic oils and it is also mainly used in high pressure working conditions. It is composed of three parts: tube, reinforcement and cover. The tube is made from black oil resistant synthetic rubber, making it have excellent performance in conveying petroleum-based hydraulic oils. The reinforcement is made from multiple layers of high tensile and high strength thick spiraled steel wire in alternating direction, making the hose have extremely high working pressure. Besides, the steel wire spiraled hydraulic hose can bear higher working pressure than steel wire reinforced hydraulic hose. Therefore, the hose has outstanding performance in very high pressure environment. The cover is made from high quality black synthetic rubber, making the hose resistant to abrasion, corrosion, cut, weather, ozone, aging and sunlight. The details of SAE 100 R13 steel wire spiraled hydraulic hose: Structure: it is composed of three parts: tube, reinforcement and cover. Tube: high quality black synthetic rubber. Reinforcement: multiple layers of high tensile and high strength thick spiraled steel wire in alternating direction, making the hose work well in very high pressure environment. Cover: high quality black abrasion, corrosion and weather resistant synthetic rubber, making the hose have longer service life. Heavy duty power lines, hydrostatic transmissions, in heavy duty environmental conditions, specific installa-tions with severe abrasion conditions, marine applications, underground and open pit mining. RECOMMENDED FLUIDS Mineral oils, vegetable oils and synthetic ester based oils (up to 212�°F 100�°C), glycols and polyglycols, mineral oils in aqueous emulsion, water.
Ingredients: Aqua, Petrolcrtum, Cetearyl Alcohol, Glycerin, Propylene Glycol, Sodium Laureth Slfate, Lanolin, Rhus Coriaria Leaf Extract, Vitis Vinifera Seed Oil, Aronia Arbutufolia Fruit Extract, Myrtus Communis Leaf Oil, Simmondsia Chinensis Seed Oil, Salicylic Acid, Hyaluronic Acid. Benefits: It has been developed to meet the daily care of the skin. It keeps the skin moist, smooth and soft thanks to arbutifolia fruit extract in its content. With its repairing effect, it helps to prevent redness and irritation on excessively worn and chapped skin. Although it is an oil-based cream with the active oils in it, its use quality is high because it is absorbed by the skin very quickly, it is a product especially preferred by those who work at a fast pace. It is a highly effective care cream for cracks in hands and heels, discoloration of elbows and knee caps. It is effective in preventing and repairing the cracks formed in the waist, belly and hip regions as a result of excessive weight gain and loss. It is used to repair cracks that occur after pregnancy and childbirth. It can be applied as a diaper rash cream for adults. It prevents the formation of open wounds in all tissues damaged in diabetes patients, when applied to pressure areas in patients who have to stay in bed all the time. It is extremely effective in rapid recovery after epilation. With the aronia fruit extract, hyaluronic acid and salicylic acid in its content, it regulates the oil balance of the skin, removes the dead cells, prevents the formation of blackheads, allows the skin spots to recover with regular use, and reduces the appearance of fine lines and wrinkles. Proven benefits in the treatment of psoriasis and eczema diseases.
Key points High performance evacuated tube collectors Can be mounted free-standing or on a pitched roof, easy to install, simple roof fixings Heat pipe - offer low maintenance No water in the vacuum tubes, no freezing problem in winter, can be used in cold area. One broken tube will not affect the function of the system. 3 years warranty, 20+ years lifespan Market leading efficiency/output Triple layer selective absorber coating, absorption coefficient 94% Evacuated tube outer tube thickness 1.8mm 14mm high conductivity heat pipe condenser, Nick-coated condenser surface. Aluminum frame, strong structure, light weight. High and constant pressure of polyurethane foaming technology ensure the outstanding insulation quality. Principle: Evacuated tube solar collector use evacuated tubes to absorb solar energy then transfer energy to heat pipe via aluminum fin, when heat pipe is heated and working liquid vaporize and rise to top of heat pipe condenser (condenser is inserted into the mainfold port inside the solar collector manifold), when the heat pipe condenser meet cold water flow inside the manifold port, the working liquid will cool down and fluidify return to the bottom of heat pipe, so time and time again repeat this process, finally cold water(glycol) inside the manifold port be heated. Technical data: Model BSSC-10 BSSC-12 BSSC-15 BSSSC-18 BSSC-20 BSSC-24 BSSC-30 No. of collector pipes 10 12 15 18 20 24 30 Gross area(m2) 1.68 1.99 2.52 2.95 3.24 3.84 3.84 Absorber surface(m2) 0.87 1.04 1.30 1.46 1.62 2.08 1.94
Inner tank: stainless steel SUS304/316L, thickness:1.0mm-1.2mm Outer tank: painted steel-0.4mm/aluminum-zinc coated steel-0.45mm/stainless steel SUS201/stainless steel SUS 304 Vacuum tube: QB-AL-N/AL-47-1500/58-1800 Insulation: 50mm-60 polyurethane Frame: coated galvanized steel-1.5mm/stainless steel SUS430-1.5mm/2.0mm aluminum alloy Accessories: intelligent controller, electric heater, magnesium bar, PT valve, negative valve etc. Characters: 1) Easy Maintenance No glycol, simple structure. No annual and periodical check-ups or maintenance is necessary. Blind sleeve design, no pollution, no-leaking heat pipe, easy installation. No water in vacuum tubes, one broken tube will not affect the function of the whole system. 2) High Performance With the cutting-edge vacuum-tube collecting technology, over 92% of sunshine energy is converted to thermal energy for heating and no circulation loss. Thicker insulation layer, functioning well in winter, even in minus-30-degree environment. 3) High Reliability System is simply working with the city net water, without pumps. Inner tank made by stainless steel SUS316-1.2mm. Working with high pressure, directly connected to running water, automatically functioning. With T/P valve and exhaust valve, it protects the tank from shrinking. 4)Year-round Operation With the freezing-proof technology, the system is designed and installed to operate for all seasons. Electric heater is optional to use, to ensure plenty hot water in rainy days. Principle: When vacuum tube absorb solar energy and heat the heat pipe ,the working fluid vaporizes and rise to the top of the heat pipe condenser, when heat pipe condenser meet cold water and cool down, the working fluid will fluidity and return to the bottom of the heat pipe, so once and once again to repeat this process.
Description HICIDE®NP20 Rapid Sterilization Recovery agent HICIDE®NP20 is an aqueous liquid broad-spectrum bactericide based on organic bromine, which is effective in killing common bacteria, fungi, yeast and molds, and can effectively prevent microbial infestation under low additive quantity. Physical and chemical properties Appearance Colorless to light yellow transparent liquid with slight characteristic odor. PH (25 â??) 3.5-7.5 Solubility (25 â??) Completely dissolved in water, low molecular alcohol and ethylene glycol. Foaming (DIN 53902) No bubbles. Instructions for use It is recommended to add 0.1-0.3% in the first step of the production to add 1/3 of the water, and the remainder is added in the last step; increase in protein, casein and similar high nutritional composition system. The most appropriate amount of additions and their compatibility depends on the actual product conditions of the laboratory test; Melveny Shanghai Testing Center can provide microbial identification, testing and decomposition of preservatives test. HICIDE®NP20 require the use of temperature not higher than the 40â??,ph
