Material: Wrought Iron, Cast Iron,stainless Steel. Color: Black, White and Antique Bronze colour is popular colors.Other colors also for your choice. Size: Accept custom. Surface Treatment: Hot dip galvanizing; powder coating; anti-rust painting. Welding: Full welding. Installation: We will leave the components to you, and it is easy for you to install. We can supply many kinds of ornamental fence,used in garden,raod beside,highway,railway and many field. It can be hot dipped ,electro galvanzied+PVC coated. We can do any design and size according to your requirement.
Field Fence also named prairie fence, cattle fence, grassland fence and tock fence is a kind of woven mesh fencing which is produced with high tensile strength hot-dipped galvanized steel wire. The weaving process makes the fabrics more flexible and universally without perforating or expanding operations. It can be easily fabricated into different shapes and designs, the opening can be square, rectangular or spacing. Field Fence specfication: 1) Field Fence Material: Field Fence is made by High quality low carbon iron wire, Galvanized iron wire,Electro galvanized iron wire, Hot dipped galvanized iron wire,High tensile strength steel wire 2) Field Fence Surface Treatment: Hot dipped galvanized, Electro galvanize, High zinc galvanized,PVC Coated 3) Field Fence wire diameter: 1.8-2.5mm(, inner wire ), 1.8-3.5mm( outer wire) 4) Field Fence Tensile strength: horicontal wire: 80-90kgs mm2, vertical wire: 40-50 kgsmm2 5) Field Fence Height: 0.8m, 0.9m, 1.0m, 1.1m, 1.2m, 1.5m,1.8m,2m,2.4m; 6) Field Fence Length: 15m,30m,50m,100m 7) Field Fence color: Field Fence color usually is green,black,white,as your request. 8) Material: low carbon hot-dipped galvanized wire. Features: the products have the structure of winding the appearance is beautiful. we offer have innovative and firm structure, flat surface, uniform opening and good integration. This product offers good flexibility; good pressure resistance,corrosion resistance and weather resistance properties and can serve for a very long time. Even thecut pieces will not deform under pressure.
Concertina Razor Wire is also named Razor wire or razor type barbed wire. It is a kind of modern security fencing materials with better protection and fencing strength made of hot-dipped galvanized steel sheets or stainless steel sheets. With beautiful and sharp blades and strong core wire, razor wire has the features of secure fencing, easy installation, age resistance and other properties. Concertina Razor Wire is widely used in high-grade residence district, warehouses, prisons and in military fields and other sites requiring severe fencing and security. Razor wire can be classified into straight type razor wire, concertina coils, crossed type and flat type according to the installation models. Outside Diameter No. of Loops Standard Length per Coil Type Notes 450mm 33 8M CBT-65 Single coil 500mm 41 10M CBT-65 Single coil 700mm 41 10M CBT-65 Single coil 960mm 53 13M CBT-65 Single coil 500mm 102 16M BTO-10.15.22 Cross type 600mm 86 14M BTO-10.15.22 Cross type 700mm 72 12M BTO-10.15.22 Cross type 800mm 64 10M BTO-10.15.22 Cross type 960mm 52 9M BTO-10.15.22 Cross type Reference Number Blade Style Thickness Wire Dia Barb Length Barb Width Barb spacing BTO-10 0.5±0.05 2.5±0.1 10±1 13±1 25±1 BTO-12 0.5±0.05 2.5±0.1 12±1 15±1 25±1 BTO-18 0.5±0.05 2.5±0.1 18±1 15±1 35±1 BTO-22 0.5±0.05 2.5±0.1 22±1 15±1 36±1 BTO-28 0.5±0.05 2.5 28 15 46±1 BTO-30 0.5±0.05 2.5 30 18 46±1 CBT-65 0.6±0.05 2.5±0.1 65±2 21±1 101±2
Reinforcing Trench Mesh made from CRB550(550MPa) ribbed wires. The reinforcing trench mesh products all come 6.0m longs, available in 3-Bar, 4-Bar, 5-Bar and 6-Bar, as well as 8, 11 and 12mm wires. Its long, narrow sheets of concrete reinforcing mesh, has the continuous lengths of joint reinforcement that are embedded into the horizontal mortar joints of masonry walls. Joint reinforcement has long proven to be necessary for superior performance of masonry wall construction. Used specifically for residential footing trenches, paths or other narrow spaces. Length m Width m Longitudinal Wires mm Cross Wires mm Mass Kg 6.0 0.2 7.6 @ 100 4.77 @ 300 7 6.0 0.3 7.6 @ 100 4.77 @ 300 9 6.0 0.4 7.6 @ 100 4.77 @ 300 12 6.0 0.5 7.6 @ 100 4.77 @ 300 14 6.0 0.2 10.7 @ 100 4.77 @ 300 13 6.0 0.3 10.7 @ 100 4.77 @ 300 18 6.0 0.4 10.7 @ 100 4.77 @ 300 22 6.0 0.5 10.7 @ 100 4.77 @ 300 27 6.0 0.2 11.9 @ 100 4.77 @ 300 16 6.0 0.3 11.9 @ 100 4.77 @ 300 22 6.0 0.4 11.9 @ 100 4.77 @ 300 27 6.0 0.5 11.9 @ 100 4.77 @ 300 33
Concrete welded Reinforcing mesh is a welded wire fabric, prefabricated steel reinforcement material. It has a rectangular or square grid pattern and is produced in flat sheets. The fabric is used to provide tensile strength and crack control to structural concrete elements. Advantages: Concrete Welded mesh reinforcingis a convenient and cost effective alternative to conventional bar reinforcement for the following reasons : The mesh is generally specified and manufactured according to standard references making for easy site identification, quality control and management. The mesh is manufactured in sheets or rolls resulting in a quick and simple site installation process. Although generally used in surface beds (concrete floor slabs on fill) and concrete roads, mesh can also be used in suspended floor slabs, concrete walls, culverts / drains and composite brick / concrete retaining walls. Square Reinforcing Mesh Standard Sheets - 6 m (length) x 2.4 m (width) = 14.4 m²: REFERENCE MAIN WIRE(mm) CROSS WIRE(mm) EDGE WIRE(mm) MASS(kg) SL81 7.60@100 7.60@100 7.60@100 105 SL102 9.50@200 9.50@200 9.50@200 80 SL92 8.55@200 8.55@200 8.55@200 65 SL82 7.60@200 7.60@200 7.60@200 52 SL72 6.75@200 6.75@200 6.75@200 40 SL62 6.00@200 6.00@200 6.00@200 33 SL52 4.75@200 4.75@200 4.75@200 21 Rectangular Reinforcing Mesh Standard Sheet - 6 m (length) x 2.4 m (width) = 14.4m². REFERENCE MAIN WIRE(mm) CROSS WIRE(mm) MASS(kg) RL718 25*6.75@100 30*7.60@200 68 RL818 25*7.60@100 30*7.60@200 79 RL918 25*8.55@100 30*7.60@200 93 RL1018 25*9.50@100 30*7.60@200 109 RL1118 25*10.65@100 30*7.60@200 131 RL1218 25*11.90@100 30*7.60@200 157
Concrete Reinforcing Mesh Panel also called: Steel Bar Welded Wire Mesh /reinforcing welded mesh panel,cold ribbed steel bar mesh,welded wire mesh. Material: steel bar Weaving: the wires that run parallel to the width of the roll are placed on top of the wires running parallel to the length. Then, the wires are welded where they intersect. Wire diameter: welded steel bar panels ranges from 5mm to 16mm. Applications: Welded steel bar panels are widely used in construction reinforcement, the ground for the tunnels, bridges, highway, airport and wharf, also in construction of wall body. Features: Solid construction, Easy handling Packing: PVC Shrink, Moister-proof paper, Carton, pallet, Wooden Box , Special packing can be arranged upon request
The slab mesh reinforcement is used on footing construction, beam and piers of waffle rafts. The slab mesh was made by Heyou wire mesh factory accordance with AS NZS 4671-2001. the popular specification is SL102, SL92, SL82, SL72, SL63, SL53, L8TM, L11TM, L12TM in the Australia and New Zealand civil engineeing. The slab mesh reinforcement includes reinforcement mesh and trench mesh. Aoriding to different construction site, they use the spcification of slab meshes are difference. The full of slab mesh reinforcement specification as below: REINFORCING MESH TO AS/NZS4671: 2001 / TRENCH MESH Code STD UNIT LONGITUDINAL WIRES CROSS WIRES MASS / KG L8TM200 6 Metre 3 x 7.60 @ 100 4.00 @ 300 6.8 L8TM300 6 Metre 4 x 7.60 @ 100 4.00 @ 300 9.2 L8TM400 6 Metre 5 x 7.60 @ 100 4.00 @ 300 11.6 L8TM500 6 Metre 6 x 7.60 @ 100 4.00 @ 300 13.9 L8TM600 6 Metre 3 x 7.60 @ 100 4.00 @ 300 15.9 L8TM2400 6 Metre 25 x 7.60 @ 100 4.00 @ 300 72 L11TM200 6 Metre 3 x 10.70 @ 100 4.77 @ 300 13 L11TM300 6 Metre 4 x 10.70 @ 100 4.77 @ 300 17.7 L11TM400 6 Metre 5 x 10.70 @ 100 4.77 @ 300 22.3 L11TM500 6 Metre 6 x 10.70 @ 100 4.77 @ 300 26.8 L11TM600 6 Metre 7 x 10.70 @ 100 4.77 @ 300 34 L11TM2300 6 Metre 24 x 10.70 @ 100 4.77 @ 300 107.1 L12TM200 6 Metre 3 X 11.90 @ 100 4.77 @ 300 16.3 L12TM300 6 Metre 4 X 11.90 @ 100 4.77 @ 300 21.8 L12TM400 6 Metre 5 X 11.90 @ 100 4.77 @ 300 27.3 L12TM500 6 Metre 6 X 11.90 @ 100 4.77 @ 300 32.8 L12TM600 6 Metre 7 X 11.90 @ 100 4.77 @ 300 38.1 Slab mesh reinforcement for footing slab, beam and piers RIBBED RECTANGULAR MESH Code STD UNIT LONGITUDINAL WIRES CROSS WIRES MASS / KG RL718 6 x 2.4m Sheet 25 x 6.75 @ 100 30 x 7.60 @ 200 67 RL818 6 x 2.4m Sheet 25 x 7.60 @ 100 30 x 7.60 @ 200 79 RL918 6 x 2.4m Sheet 25 x 8.60 @ 100 30 x 7.60 @ 200 93 RL1018 6 x 2.4m Sheet 25 x 9.50 @ 100 30 x 7.60 @ 200 109 RL1118 6 x 2.4m Sheet 25 x 10.70 @ 100 30 x 7.60 @ 200 130 RL1218 6 x 2.4m Sheet 25 x 11.90 @ 100 30 x 7.60 @ 200 157 Slab mesh reinforcement for footing slab, beam and piers REINFORCING MESH TO AS/NZS4671:2001 / RIBBED SQUARE MESH 6.0 X 2.4 METRES Code STD UNIT LONGITUDINAL WIRES CROSS WIRES MASS / KG SL52 6 x 2.4m Sheet 10 x4.77 @ 200 + 4 x 4.00 @ 100 30 x 4.77 @ 200 21 SL62 6 x 2.4m Sheet 10 x 6.00 @ 200 + 4 x 4.24 @ 100 30 x 6.00 @ 200 33 SL72 6 x 2.4m Sheet 10 x 6.75 @ 200 + 4 x 4.77 @ 100 30 x 6.75 @ 200 41 SL82 6 x 2.4m Sheet 10 x 7.60 @ 200 + 4 x 5.37 @ 100 30 x 7.60 @ 200 52 SL92 6 x 2.4m Sheet 10 x 8.60 @ 200 + 4 x 6.00 @ 100 30 x 8.60 @ 200 66 SL102 6 x 2.4m Sheet 10 x 9.50 @ 200 + 4 x 6.75 @ 100 30 x 9.50 @ 200 80 SL81 6 x 2.4m Sheet 25 x 7.60 @ 100 60 x 7.60 @ 100 105 Slab mesh reinforcement for footing slab, beam and piers SQUARE MESH 300 X 300 SPACING TO AS/NZS4671: 2001 Code STD UNIT LONGITUDINAL WIRES CROSS WIRES MASS / KG SL53 6 x 2.4m Sheet 6 x 5.00 @ 300 20 x 5.00 @ 300 14 SL63 6 x 2.4m Sheet 6 x 5.00 @ 300 20 x 5.00 @ 300 21
Reinforcing mesh was made by deformed bar after drawn, which is accorded to Australian/New Zealand Standard AS-NZS 4671-2001. The material is 250N, 300E, 500L, 500N and 500E, the mesh spaces is 200mm, there is two sides overhang which is 100mm. 1. The angle of the rib or inclined indentation of the reinforcing mesh panels' bar isn't less than 45°. The angle scope is greater than 45° and is less than 70°, the rib height is from 0.025d to 0.10d. 2. The reinforcing mesh panel includes transverse and longitudinal bar, pitch and overhang. The Australian and new zealand's market, the normal panel size is 2.4m*6m.Because of containers size, we always advise our cutomer to make the panel size to be 2.2m*5.8m. It can be easy to be load and save more USD1000 per container for packing and loading cost. 3.Each sheet of reinforcing mesh panel shall include number of bars,pitch,length,width, and overhang dimensions. And the bar arrangement of reinforcing mesh panel has single bars, twin bars or combination of single bars and twin bars. 4.The technical data of reinforcing mesh panle is contained composition and characteristic mechanical porperties of reinforcing steels. Common size of Squre reinforcing mesh panel for Austialian Market Mesh Type and reference number Longitudinal bars Cross-bars Mass for 6 x2.4 m sheets Cross-sectional area/m width No. x dia., mm Pitch@mm No. x dia., mm Pitch@mm Unit area kg/sqm Sheet, kg Long'l bars sqmm/m Cross bars sqmm/m Squre, with edge side-lapping bars SL102 10 x 9.5 + 4 x 6.75 200100 30 x 9.5 200 5.6 80 354 354 SL92 10 X 8.6 + 4 X 6.0 200100 30 x 8.6 200 4.6 66 290 290 SL82 10 x 7.6 + 4 x 6.0 200100 30 x 7.6 200 3.6 52 227 227 SL72 10 x 6.75 + 4 x 5.0 200100 30 x 6.75 200 2.8 41 179 179 SL62 10 x 6.0 + 4 x 5.0 200100 30 x 6.0 200 2.2 33 141 141 Squre, without edge side - lapping bars SL81 25 X 7.6 100 60 x 7.6 100 7.1 105 454 454 How can we conctrol our products quality for exporting Autralia? Firstly, we purchase the material from Steel Factory and inspect chemical composition and mechnical property of reinforcing mesh panel in our in-house laboratary according to AS 1554.3. Secondly, the panel size tolerances meassure way as: a. Panel Size dimensionsâ?¤6m in length, there is 40mm tolerances. b. Panel size dimensionsï¼?6m in length, the tolerance is ±0.7% c. Wire diameter and mesh size measure and weld shear resistance test conformance to AS NZS 4761-2001 and as per contract. d. Weigh the each bundle weight to calculate each panel weight.
Plastic Corner bead is mainly used for plastering of walls (Drywall), provides excellent protection to external corners. The holes and knurled surface provide an excellent 'key' for the joint compound. It includes several types such as "L" bead.
Our black plain paper is mainly used for grinding wheel, abrasives discs, and laminating the fiberglass meshes for reinforcing grinding wheels. We also offer black paper for printing grinding wheel labels. Models: 30g, 35g, 45g, 55g etc.. It could be cutted to different size according to customers demand.
There are many types and specifications of fiberglass net. Generally the mass from 60 g/sq m up to 500 g/sq m; and the meshes from 20 x 20 to 1 x 1; As to the weave, it might be leno or plain. Application (1), In construction industry for wall finishing reinforcement. There are different specification adopted, such as 70-5x5, 80-5x5, 100-5x5, 130-5x5, 150-5x5, etc.. (2), In construction industry for reinforcing water proofing products, such as water proofing membrane, water proofing roof. (3), In construction industry for reinforcing cement floor. (4), In stone industry for reinforcing marble slabs, etc.. There are many different specification, which might be made according to customers demand. (5), In stone industry for reinforcing mosaic. The specification and structure might be made at special demand for being suitable. (6), In grinding wheel industry for reinforcing grinding wheel, cutting wheel, dish wheel, etc.. There are many different specification and different types made according to order. (7), In many other fields as reinforcement for lots of application. The main models of fiberglass net are as follows: 70-20x10 70-6x5 80- 6x5 100 - 5x5 130- 5x5 145- 5x5 160 - 5x5 As to the width and roll length, it might be according to order.
Fiberglass drywall joint tape is usually used for Construction and declaration application as joints for decoration or repairing wall crack, etc. Usual Spec: 70g-9x9 50mmx20m 70g-9x9 50mmx45m 70g-9x9 50mmx90m Also can offer 60g-9x9, 150m roll etc.
(1) Silicone Fiberglass Sleeve These sleevings are widely used as a wiring insulator for H-grade electrical machinery, electrical appliances, electric apparatus, and also for the protection of collected strands of wire. (2) Silicone Rubber Fiberglass Sleeve This sleeving possesses good qualities of dielectric, high temperature resistance, excellent elasticity. It can be used for wiring insulation and mechanical protection for electrical machinery and electrical appliances. We offer many kinds of fiberglass silicone sleeve with good quality.
Brand: Rarelong Car Makes: For Mercedes-Benz W220 Item:Auto Air Suspension Shock Absorbers Position :Front Left and Right OE No. :A2203202438, A2203205113, A2203202138, A2203202238 Material: Rubber, SteeL ,Aluminum Payment Terms:T/T, Western Union, Paypal, Cash, etc Place Of Origin:China Lead Time: For Stocks, 1-3 Working Days After Payment Arrived. Or Please Contact With us For More Details Shipment :By Air, By Sea, By DHL, FEDEX, UPS, TNT, etc Warranty:12 Months Package: Safe Inner Box+Standard Outer Box
Aperture / Opening: Diamond Opening, Weaving Opening, Triangle Opening Specification: width up to 2.5m, no length limitation; Edge: Raw Edge, plated sheathed, hooked, inner plated welded etc.; Wire Materials: Spring Steel (High Carbon Steel), or Stainless steel (e.g. 304 & 316)
Red Star Wire Mesh MFG Company is very experienced and good at manufacturing pre-crimped woven wire screens, especially heavy duty ones. All our screen meshes are made to the highest quality specifications with a specific type of screen available to suite any of clients certain screening requirements. With 30 years around in the screening media industry business line, our knowledge and expertise has evolved to where we can supply the clients with the optimal products and solution to thein screening requirements at the lowest total cost. We offer a complete range of openings, wire diameters, materials and weave types enabling us to provide you with the optimum wire screen media product for your application. Our extensive inventories allow us to supply you the most suitable product to your exact applications. As with all Red Star Wire Mesh MFG Companys screening media, our Square opening wire mesh screen range is fully backed by a good-skilled and well-trained team with knowledge and experience built over years in screening medias. For applications demanding maximum productivity and service at the best possible cost, it demands square wire screening medias, from Red Star Wire Mesh MFG Company.
Slot Screen Slot Screen Weave Method: before curly curls, weaving, one-way crimp, crimp and intermediate crimp lock. Rectangular Screen Rectangular Screen Type of weaving: Crimped before weave, double-direction, ripples flections, tight lock flections, flattop flections, double-direction flections, list-direction separate ripples flections. Features: Rectangular Screen is substantially woven, firm structure, uniform cells, enduring, graceful, uniform surface, corrosion-resisting, etc.
Screen Type: Flat Shale Shaker Screen, Wave Shaker Screen, Hook Strip Soft Screen, Hook Strip Flat Screen, Steel Frame Screen, Composite Frame Screen Screen Models: MI-Swaco, Derrick, NOV, Kemtron/Elgin etc; Mesh Count: From 20 mesh to 400 mesh Panel Size: Up to 1149 x 1213 mm Layer Numbers: 2~3; Edge Type: 90 degree hook strip, Hard hook strip Material: Stainless steel 304, 316L, 321 etc.
Seismic Cable used for Sercel 428XL System. The standard length is 220m, with configuration: FM4--27.5M--FDU--55M--FDU--55M--FDU--55M--FDU--27.5M--FM4. Cable O. D. is 6.5mm(ST+) or 9.5mm(WPSR) If you need other length or configuration, please feel free to contact with us for more details. Used for Geode, Summit, PASI, DAQ Seismic Data Acquisition System; Standard Configuration: 125M Length, 24 Take-out, 5M Interval, 2 Lead in 5M, 24-61S Connector at both End.  If you need other configuration, Cable Length, Interval, Surface Connector, Take-out, please contact us.
We product geophysical exploration cables, detector accessories ectopicspecial equipment.as well as parts which match the equipments, and the other are attached to the maintenance, repair and process-ing of special products users. The main products are four main categories, 89 species: First, digital transmission cable:480/428 land cable ARIES series of land and submarine cable Stub cable for geophone Light insulation coating line, military coating line New micro-logging cable small refraction cable V8 transient cable Seismic Cable used for Sercel 428XL System. The standard length is 220m, with configuration: FM4--27.5M--FDU--55M--FDU--55M--FDU--55M--FDU--27.5M--FM4. Cable O. D. is 6.5mm(ST+) or 9.5mm(WPSR) If you need other length or configuration, please feel free to contact with us for more details.