Called Black Powder collected from Li-ion battery scrap Recycling available to extract precious metals such as Li, Ni, Co, Mn, Cu, Al, etc, 70 tons
Food packaging products, amenities, synthetic thatch, waste watcher, recycling bins, wpc decking, roof tiles & construction products.Exporters, importers and manufacturers
Underground Waste Container System SMALLANDMEDIUMSIZE WASTE TRANSFER STATION SYSTEM WASTE TRANSFER STATION SYSTEM This is the most advanced space saving way for waste recycling, which is ideal for any geographical condition. It is composed of one single overground trash can and a whole set of underground devices, which includes the main framework structure and a waste compress machine. This product is a perfect solution for ecological sanitation and waste disposal. The container size can be customized for different environments. An invisible solution for public sanitation: This is the most advanced space saving way for waste recycling, which is ideal for any geographical condition. It is composed of one single overground trash can and a whole set of underground devices, which includes the main framework structure and a waste compress machine. As an effective waste recycling system, it is suitable for storing all kinds of garbage. The underground elevator can be customized for different si ze. The standard models are 10m, 17m and 20m. As�a perfect solution for public sanitation and waste collection, it is ideal for big commercial district and the downtown section of cities.� Main features An hygienic solution for waste collection Due to its undergrou nd container design, the system is completely free of unpleasant odour to the public environment A wide application range Suitable for all kinds of urban environments from the biggest public area to small urban road.
The advent of cars has greatly promoted the development of society and improved the quality of our life. But on the other hand, the waste tires produced by automobiles pose a huge threat to our living environment. DoingGroup has developed a waste tire pyrolysis plant, the pyrolysis plant is the use of high temperature cracking chemical reactions, the waste tires cracked into fuel, carbon black, steel wire, combustible gas process. The main workflow of the tire pyrolysis plant is as follows: 1. Use mechanical waste tires to enter the reactor and close the inlet to prevent gas flow out. 2. Carbon, wood or fuel heating reactor, the reactor is generally 200-300 degrees is the beginning of the cracking reaction, when the waste tires vaporized into oil vapor. 3. The hydrocarbons entering the condensing system are liquefied into oil and collected in the tank unit. Our system has a negative pressure device, he can greatly enhance the production of pyrolysis oil. 4.Liquefied petroleum gas that can not be liquefied under atmospheric pressure is returned to the reactor as fuel for combustion, which is not only energy saving and environmental protection. 5. After the completion of oil production, the reactor will be cooled. When the temperature drops to 40 degrees, the carbon black and wires will be removed automatically or manually. The main advantages of waste tire pyrolysis plant are as follows: 1. Reactor press standard manufacturing, the use of 16mm thick boiler steel pipe and arc pressure head, can withstand high pressure and high temperature. 2 high standard 3-step welding process, not easy to crack, long service life. 3. Pinion rotation device, small power, does not directly contact the reactor, heat transfer less easily deformed. 4. The three-stage cooling system uses tube condensers, also known as heat exchangers, which are currently the most commonly used and best performing condensers in the oil industry. Can ensure that the cracked oil and gas fully cooled, high oil production. 5 safety device oil-water separator, water seal, vacuum device, to ensure the safe and efficient operation of equipment. The final product cracked by the waste tire cracker has a wide range of uses, mainly as follows: 1. Fuel: Mainly used in steel mills, boiler heating, heavy oil generating units, cement plants and so on 2 carbon black: can be used for pressure ball burning, can also be used for refined toner. Refined toner for new tires, rubber soles and pigments. 3. Steel wire: can scrap recycling, can also be re-cast into other steel. 4. Combustible gas: the system was re-collected for reactor heating.
"Palladium Extraction Resin The resin method is to use chelating resin to recover palladium from waste catalysts, waste electrical components, broken vessels containing palladium, and waste electroplating solutions. It has the advantages of high separation efficiency, simple operation and recyclable resin. The palladium extraction resin produced by Jiangsu Kingshan New Material Co., Ltd. has high selective affinity and adsorption rate, and is easy to regenerate and has high regeneration rate, and is widely used in industrial palladium metal recycling."
"Rhodium adsorption resin The resin method is to use ion exchange resin to recover rhodium from waste catalysts, waste electrical components, and waste electroplating solutions. It has the advantages of high separation efficiency, simple operation and recyclable resin. The rhodium adsorption resin of Jiangsu Kingshan New Material Co., Ltd. has high selective affinity and adsorption rate, and is easy to regenerate and has high regeneration rate, and is widely used in industrial palladium metal recycling."
"Rhodium adsorption resin The resin method is to use ion exchange resin to recover rhodium from waste catalysts, waste electrical components, and waste electroplating solutions. It has the advantages of high separation efficiency, simple operation and recyclable resin. The rhodium adsorption resin of Jiangsu Kingshan New Material Co., Ltd. has high selective affinity and adsorption rate, and is easy to regenerate and has high regeneration rate, and is widely used in industrial palladium metal recycling."
Domestic waste contains a large number of recyclable and reusable materials, such as high calorific value combustibles can be prepared into alternative fuels (RDF, SRF) to reduce the use of coal, organic matter can be used for biogas fermentation, plastic, glass, metal, waste High-value recyclables such as paper can be directly refurbished or used as raw materials for further processing. Therefore, sorting and recycling domestic waste can greatly reduce operating costs, with low investment and high returns. At the same time, the equipment can replace urban waste landfills and rural waste temporary storage stations for on-site waste treatment, with a small footprint and high processing performance. It can be equipped with corresponding sewage treatment and air treatment modules.
Thermoforming Packaging Machine Automatic Vacuum Packaging Machine MODEL NO.: RC420/520 SPECIFICATION: Applications Applicable for vacuum, gas and skin-packing with various food, meat, sea food, fruit, vegetable, medical and hardware items. Main Features and Characteristics 1. OMRON PLC, touch screen & servo motor are used with reliable performance and ease of operation; 2. Modular moulds are applied that can be replaced easily and the machine can be used for multiple purposes; 3. Photoelectric follow-up: color cover film or optical film can be used for packaging, which can reduce the cost and upgrade the products; 4. With modular moulds, They can be replaced easily and can be used on several machines. The moulds have a cooling system; 5. Fitted with a scrap recycling system, good environment and health can be maintained; 6. The mould adopts aluminum alloy materials,have good corrosion resistance and wearing resistance after Hardening treatment; 7. With special holding chains, the packaging machine is applicable for extending and moulding of flexible film or rigid film of different thickness for special purpose packaging; 8. With advanced horizontal and longitudinal cutting systems, the machines replacement operation is more convenient; 9. There is a scrap and waste recycling system to help maintain environmental cleanness; 10. Main part of the machine is made of stainless steel, that greatly improves the corrosion resistance of the equipment; 11. The German Busch Pump is used on the machine, with high degree, steady quality and good durability. Machine Item Model ZG-420 ZG520 Width of top film (mm) 396mm 496mm Width of bottom film (mm) 422mm 522mm Package style Vacuum & Gas Flush 200-500mm Film Flexible/ Semi-rigid/ Rigid Flexible/ Semi-rigid/ Rigid speed 4-6T/M 4-6T/M Water cooling 0.15Mpa 0.15Mpa Total power 10kw 10kw Electric power 380V/50HZ 380V/50HZ Compress air requirement(to be supplied by user) 0.6Mpa 0.6Mpa Machine weight(kg) 2200kg 2450kg Machine overall dimensions 6000 1050 2050mm 6500 1150 2050mm Main Machine Structure Main Machine Body Stainless steel Mold Material Teflon coated aluminum Mold Size According to Customers request Chain REGINA Top Film Roller Air-shaft(Mechanical brake) Code Printer Auto type printer Cutting System Horizontal punching cutting Slitting Device Vertical wheel cutting Discharge Conveyor 1000mm length Scrap Recycling System Rolling rewinding type -
Metal shredder, scrap wrapping machine, waste baler, waste shredder, alligator shears, textile baler, cardboard baler.Manufacturer
All technical support is provided by expert team to customers field in battery recycling plant that wanted to install, extract precious metals from mining, recycling and refining all of precious or rare metals from solid, liquid and any kind of waste. Installation and commissioning the facility provide by Proses Makina experienced team.
We offer world’s best quality tyre protection chain of lazar shanparts Loaders are the must of the stone and marble quarries, and tyre protection chains are the must of the loaders. Chains protect the expensive tyres of the loaders under the very though conditions of the quarries and also increases the traction and the handling capacity of the machine, with higher productivity per hour and lower down time. Experiences and numerous applications all over the world proofed that las zarh offers the best cost per hour performance at hot slag removing. The special link and mesh design and heat resistant formulated alloyed steel gives excellent results not only at hot slag but also at scrap, waste recycling and glass industry. Las zarh offers the longest life and the highest performance even underground and offers complete solutions for every kind of operation and every type of machine. They produce special design and dimension chains for every kind of mine site and every size of machines.
According to statistics, in 2013, the amount of waste tires produced in China was 10.18 million tons, and it is estimated that more than 20 million tons will be exceeded in 2020. Where is the growing number of used tires? In response to this social problem, DoingGroup used chemical cracking reactions, R & D out of waste tire cracking equipment. Our waste tire refining equipment, by more and more people's attention, every day from around the world to visit our factory visit our equipment, our equipment is so popular, is Because of its following advantages: 1. Reactor is produced according to the pressure vessel production standards, the use of 16mm thick boiler steel pipe and arc pressure head, can withstand high temperature and pressure. 2. High standard three-step welding process, not easy to rupture, long service life. 3. Pinion rotation device, small power, no direct contact with the reactor, heat transfer less easily deformed. 4. Three-stage cooling system with tube condenser, is the most commonly used in the oil industry, the best performance of the condenser. Make sure the fuel vapor is fully cooled and produces high volumes of oil. 5. Safety devices have oil-water separator, water seal, vacuum device. To ensure safe and stable operation of equipment. Refinery equipment process: 1, First of all, the waste tires from the feed door into the host reactor, close the feed door, sealed. Heat the main furnace with fuel coal or wood in the heating chamber. 2, When the temperature reaches 220 , oil and gas precipitation, into the buffer chamber, residual oil (containing some slag) sink to the residue tank. 3,Light oil automatically enters the cooling system, condensed into oil. 4 Non-condensable gas, it will return to the reactor, as the heating reactor fuel. After the above process, you can get fuel, carbon black, steel wire, combustible gas, which cracked the material from the waste tires has a wide range of uses: 1. Fuel oil can be used in steel mills, boiler heating, heavy oil power plants and cement plants to produce refined diesel for further processing and diesel generators, light fuels, heavy machinery. 2. Carbon black can be used for pressure ball burning, refined toner. Can be used for new tires, rubber soles, pigments made of refined toner. 3. Steel wire is mainly used for scrap recycling, and re-cast into other steel. 4. Combustible gas is mainly used for circulating heating reactor. Outstanding highlights of our equipment is energy saving, low investment and high yield. Market prospects will be more and more broad, any machine problems, please contact us !!!
Cow dung cakes, neem sticks, amino acid, waste papers, wooden scrap, miscealleanous scrap.
1. High degree of harmlessness. After the medical waste is incinerated, the pathogens in the medical waste are completely eliminated, and the harmful gas and smoke generated during the combustion process meet the emission requirements after treatment. 2. The reduction effect is good. The combustible components in medical waste are decomposed at high temperature after incineration, which can generally reduce the weight by 80% and the volume by more than 90%. 3. Heat recycling. The high-temperature flue gas heat energy generated by the incineration of medical waste is absorbed by the waste heat boiler and converted into steam for heating or power generation. 4. The operation of incineration treatment is not easily affected by the weather.
Double Stage Vacuum Transformer Oil Purifier, Mineral Dielectric Oil Purification Plant Application: This machine is applied to treat various of unqualified insulation oils including aging transformer oil specially for the power which is above 110KV, mutual inductor oil, switch oil and so on. Also it can inject the insulating oil into the transformers on-line. Regenerate the seriously deteriorated oil by removing the polarity materials. series double-stage vacuum transformer oil purifier adopts a creative advanced technology. The machine is widely used for industries of power plant, power station, electricity company, transformer factory, metallurgy, petrochemical, mechanical engineering, transportation, railway and transformers manufacturing etc Features: 1. PH 5.5 2. Acid 0.03mgkoH/g 3. Flash point 145 4. Dielectric strength 75KV 5. Dielectric loss: tg´(90)% 0.001 6. High vacuum: High point-Vacuum 5pa Working-vacuum 35pa 7. High absorption speed: Absorption speed power 333L/Sr. 8. Duplex 3D stereo-evaporation, eliminating the liquid water quickly 9. UK G technology by which the trace water that is show chain, such as dissolved water, can be removed effectively. 10. Distinctive removing impurities system filtering through double FH trapezoidal network and absorbing by high polymer without the mechanical power 11. Carbon fiber infrared heating system that can make the oil contains zero sum of ethyne after the treatment 12. Specially applied to vacuum oiling and drying for power transmission equipments that are over 110KV 13. The oil of any grades can be treated on line at the working site
Used Oil Vacuum Distillation Machine can treat a variety of waste lube oil, to get high quality base oil and a small amount of gasoline and diesel through vacuum distillation. After pretreatment, waste oil pumping into the distillation kettle, and heating to working temperature, we will can get the base oil, gasoline and diesel .When reaction completed, stop heating, remove residue from the bottom of the tank, then the machine can be used again. The production is economical, however, the base oil is excellent .This is the most advanced technology in the world in the waste oil recycling field, and it is suitable for large-scale industrial production. systems of used engine oil recycling machine 1 Pretreatment systemWaste oil will be pumped into the distillation kettle after pretreated. 2 Distillation system: through burning gas , fuel oil or coal to make the oil in the kettle up to the working temperature. This system equipped with stirring system and insulation system. 3 Cooling system: the gaseous hydrocarbon will be cooled into liquid base oil. Gasoline and diesel. 4 Oil storage system: the base oil, gasoline and diesel get from cooling system storage here, and then pump into the storage tank. 5 Vacuum system: meet the technology requirement. 6 Filtration system: rapidly filter out mechanical impurities in the base oil, gasoline and diesel, get the high quality base oil, gasoline and diesel. Recovery rate Base oil: 85%~88 %( index same as SN150~SN200) Gasoline: about 3% Diesel: about 3%-4% Oil residue: 6%~8%
used engine oil recycling machine can treat a variety of waste lube oil, to get high quality base oil and a small amount of gasoline and diesel through vacuum distillation. After pretreatment, waste oil pumping into the distillation kettle, and heating to working temperature, we will can get the base oil, gasoline and diesel .When reaction completed, stop heating, remove residue from the bottom of the tank, then the machine can be used again. The production is economical, however, the base oil is excellent .This is the most advanced technology in the world in the waste oil recycling field, and it is suitable for large-scale industrial production. systems of used engine oil recycling machine 1 Pretreatment systemWaste oil will be pumped into the distillation kettle after pretreated. 2 Distillation system: through burning gas , fuel oil or coal to make the oil in the kettle up to the working temperature. This system equipped with stirring system and insulation system. 3 Cooling system: the gaseous hydrocarbon will be cooled into liquid base oil. Gasoline and diesel. 4 Oil storage system: the base oil, gasoline and diesel get from cooling system storage here, and then pump into the storage tank. 5 Vacuum system: meet the technology requirement. 6 Filtration system: rapidly filter out mechanical impurities in the base oil, gasoline and diesel, get the high quality base oil, gasoline and diesel. Recovery rate Base oil: 85%~88 %( index same as SN150~SN200) Gasoline: about 3% Diesel: about 3%-4% Oil residue: 6%~8%
Overview black motor oil recycle to diesel fuel machine can be used in black engine oil, crude oil,plastic oil and shale oil, to get gasoline and diesel oil through distilled catalyst. Pumping into the heater with raw material , through the gas,fuel oil or coal heating to working temperature, the maximum working temperature about 410 degree and the required gasoline and diesel oil can be obtained after catalytic distillation. When the reaction of raw material in reactor is complete, stop heating, and remove residue from the tank of bottom, then this machine can be used again. Systems of black motor oil recycle to diesel fuel machine Reaction tank: raw material will be pumped into this tank from the primary filter . Heating system: by burning fuel oil ,gas or coal to make the oil temperature up to setting value. This system equips with insulation system. Catalytic system: raw material reaches the predetermined temperature, via catalytic effect, and then the gaseous hydrocarbons will become gasoline and diesel composition. Cooling system: gasoline and diesel after catalytic effect can be condensed into liquid materials. Temperature control system: ensure that raw material transform into gasoline and diesel oil, raw material drying by distillation, can stop heating timely. Exhaust gas handling system: a small amount of not liquefied gas via treated, can meet emission standards. 3.Index of oil after treatment: Yield diesel oil : 86-88%, gasoline oil: 5-6%, oil residue: 6-8%. Low-speed diesel engine can be used directly.
RZL series oil purifiers are suitable especially for purifying and restoring hydraulic oil, machine oil, coolant oil and various other lubrication oil This kind of oil purifier can purify contaminated lubrication in which much water, gas and many impurities exist. RZL series can rapidly remove water, gas, particular matters and impurities from lubrication oil and improve properties of lubricating oil so as to greatly extend lifetime of machinery which has lubrication system. It is especially suitable for industries including petroleum, chemical, mine, metallurgy, power, traffic, mechanical manufacture and railway for the recovery and purification of various lubricating oil such as hydraulic oil, mechanical oil, cooling oil, refrigerating oil, gear oil, gasoline engine oil, diesel oil and heat treatment oil. Characteristics 1) Perfect capacity of removing impurities. The special filters made by JunNeng are made of special materials which can effectively and rapidly eliminate various impurities, water and gas. 2) Automatic reverse flushing ability, which automatically cleans the mass impurities withheld by the purifier. 3) Advanced medium heating absorption and condensation system 4) Pressure protection, auto heating temperature control, device of auto separation of condensate water, easy to handle, safe and reliable. 5) Top quality purification material, large capacity of handling impurity, corrosion-proof, high temperature resistant, good mechanical strength, high precision of impurity removal and long lifetime. 6) Unique water/gas removal system, which adopts stereo-evaporation technology, multi-oil water separation technology, enabling fast removal of water, gas and impurity in oil. 7) Imported parts are used for all electric system, which ensures operation of the equipment with high performance 8) Lowly noisey oil pump is specially made.. Technical Parameters Name Unit RZL-20 RZL-30 RZL-50 RZL-70 RZL-100 RZL-150 RZL-200 Flow L/min 20 30 50 70 100 150 200 Vacuum Range Mpa -0.06~ -0.095 Temperature Range 60~80 Oil pump pressure Mpa 0.4 Power Supply 50HZ 380V Total Power kw 25 28 37 47 56 68 78 Cleanliness NAS NAS 6 NAS1638 Water content in oil ppm 100 Mechanical impurity % no Working Noise db(A) 65 85 inlet (outlet) diameter mm 25 25 32 32 42 50 60 dimension mm L 1980 2005 2250 2300 2450 2800 3200 W 870 870 970 1050 1500 1400 1500 H 1600 1680 1880 2000 2100 2300 2400 Dimension and weight will be changed with changing the technical specification.
