Rail Profile Gauge Rail Profile Gauge is is mainly used to measure the vertical wear and lateral wear of the rail.The reasonable design makes it light,convenient operation and intuitive reading Features 1. Digital type with direct readings: LCD display screen, clear and readable; No calculations required,gives direct reading ; When reading, hold down the HOLD button to fix the measurement value and facilitate reading. 2. High measuring accuracy : The measurement accuracy is 0.01m 3. Easy to use, measure the vertical and lateral rail wear at the same time, Position the rail wear gauge on the outer side of the rail . Push the vertical and lateral rail wear gauge so that the measuring probe is in contact with the upper surface and inner side of the rail respectively.Then the vertical and lateral wear of the rail can be read. 4. Metric /imperial unit 5. Support customize: We could customize all kinds wear gauge according to different rail profiles and different measure points. 6.Fast calibrate: One-key zero clearing function, can be quickly calibrated before each use to reach the factory measurement accuracy. 7. Magnetic fixed part: Strong magnetic fixed part to attach to the rail. 8. Rail fillet as measuring base to ensure measure data more accuracy Rail fillet is more clear than rail bottom,no dust. It could ensure the measure result reliability. 9. Portable Handle : This product is designed with a handle that is easy to hold, which greatly improves the portability of the product. It can avoid touching the ruler body directly, cause the ruler body to be stained and corroded, improve the product service life.
Digital Rail Head Wear Gauge is is mainly used to measure the vertical wear and lateral wear of the rail. The reasonable design makes it light, convenient operation and intuitive reading. FEATURE 1. Digital type with direct readings: LCD display screen, clear and readable; No calculations required, gives direct reading ; When reading, hold down the HOLD button to fix the measurement value and facilitate reading. 2. High measuring accuracy : The measurement accuracy is 0.01m 3. Easy to use, measure the vertical and lateral rail wear at the same time, Position the rail wear gauge on the outer side of the rail . Push the vertical and lateral rail wear gauge so that the measuring probe is in contact with the upper surface and inner side of the rail respectively. Then the vertical and lateral wear of the rail can be read. 4. Metric /imperial unit 5. Support customize: We could customize all kinds wear gauge according to different rail profiles and different measure points. 6.Fast calibrate: One-key zero clearing function, can be quickly calibrated before each use to reach the factory measurement accuracy. 7. Magnetic fixed part: Strong magnetic fixed part to attach to the rail. 8. Rail fillet as measuring base to ensure measure data more accuracy Rail fillet is more clear than rail bottom, no dust. It could ensure the measure result reliability. 9. Portable Handle : This product is designed with a handle that is easy to hold, which greatly improves the portability of the product. It can avoid touching the ruler body directly, cause the ruler body to be stained and corroded, improve the product service life. Model LJ-GM-A Center vertical wear measure range0-15mm Lateral wear measure range0-25mm Score value0.1mm Indication error ± 0. 15mm Supply CustomizeUIC60/60E1, UIC54 /54E1, 115RE 68TR ect all profiles Block customize block for gauge
Product Description Digital Rail Head Wear Gauge is is mainly used to measure the vertical wear and lateral wear of the rail.The reasonable design makes it light,convenient operation and intuitive reading. FEATURE 1. Digital type with direct readings: LCD display screen, clear and readable; No calculations required,gives direct reading ; When reading, hold down the HOLD button to fix the measurement value and facilitate reading. 2. High measuring accuracy : The measurement accuracy is 0.01m 3. Easy to use, measure the vertical and lateral rail wear at the same time, Position the rail wear gauge on the outer side of the rail . Push the vertical and lateral rail wear gauge so that the measuring probe is in contact with the upper surface and inner side of the rail respectively.Then the vertical and lateral wear of the rail can be read. 4. Metric /imperial unit 5. Support customize: We could customize all kinds wear gauge according to different rail profiles and different measure points. 6.Fast calibrate: One-key zero clearing function, can be quickly calibrated before each use to reach the factory measurement accuracy. 7. Magnetic fixed part: Strong magnetic fixed part to attach to the rail. 8. Rail fillet as measuring base to ensure measure data more accuracy Rail fillet is more clear than rail bottom,no dust. It could ensure the measure result reliability. 9. Portable Handle : This product is designed with a handle that is easy to hold, which greatly improves the portability of the product. It can avoid touching the ruler body directly, cause the ruler body to be stained and corroded, improve the product service life. SPECIFICATION Model LJ-GM-A Center vertical wear measure range 0-15mm Lateral wear measure range 0-25mm Score value 0.1mm Indication error 0. 15mm Supply Customize UIC60/60E1, UIC54 /54E1, 115RE 68TR ect all profiles Block customize block for gauge
Sinco's custom leather badge holders offer a stylish and professional solution for displaying identification. Crafted from high-quality leather and customizable to your specifications, these badge holders provide durability and elegance in one accessory, perfect for any professional setting. What customization options are available for Sinco's leather badge holders? Sinco offers a range of customization options for leather badge holders, including imprinting logos, selecting colors, and choosing closure mechanisms. What is the minimum order quantity for custom badge holders? 100. How long does it take to receive a custom order? The lead time for custom orders typically ranges from 2 to 4 weeks, depending on the complexity of the customization and current order volume. Are there any restrictions on the size or shape of badges that can be accommodated? Sinco can accommodate various sizes and shapes of badges, but please contact our team to discuss specific requirements. What materials are used in Sinco's leather badge holders? Our leather badge holders are crafted from high-quality genuine leather for durability and a premium feel. Can I request a sample of a custom badge holder before placing a larger order? Yes, you can request a sample of a custom badge holder before placing a larger order. Sample fees may apply. What is the durability of Sinco's custom leather badge holders? Sinco's custom leather badge holders are designed to withstand daily wear and tear, ensuring long-lasting durability. Are there any special care instructions for maintaining the quality of the badge holder? To maintain the quality of your leather badge holder, we recommend avoiding exposure to extreme temperatures, moisture, and direct sunlight. Does Sinco offer discounts for bulk orders of custom badge holders? Yes, Sinco offers discounts for bulk orders of custom badge holders. Please inquire with our sales team for pricing details based on your order quantity.
*The depth of the feed, the real-time battery power digital display, the operator is clear at a glance *Dual control system, both electronic feed and mechanical operation feed *Electronic feed, the feed precision is adjustable, realize the dual purpose of primary grinding and precise grinding *Preset the warning feed depth for grinding to prevent excessive grinding and cause grinding accidents *Super endurance capability, can work continuously for 1 hour *The whole machine is waterproof and can be used below minus 30 Specification Model LJ-LGF2001 Type Electric Rail Grinding Machine Material Aluminium Operating speed 4500r/min Rated power 5Kw (brushless DC motor) Grinding wheel feed accuracy 0.1 mm Grinding wheel size 150*55*75x4-M8 mm (outer diameter inner diameter thickness) Maximum tilt range of the grinding wheel 90 ° in one direction Operating temperature requirements -30 to 45 Grinding wheel type resin thick-walled cup-shaped grinding wheel Battery pack capacity 21Ah Rated voltage of battery pack 72V Weight 70Kg Profiling function realize profiling grinding of the outer edge contour of different types of rails Endurance capability(one charge) thermit welding grind around 8 welds; laser welding grind around 10 welds Grinding wheel feeding mode Dual control system, which can feed both mechanically and electronically Electronic feed It is divided into three gears for key switching and operation. First gear: fine grinding, unit feed 0.1mm Second gear: initial grinding, unit feed 0.3m Third gear: initial grinding, unit feed 0.5mm
Rail Profile Gauge Rail Profile Gauge is is mainly used to measure the vertical wear and lateral wear of the railThe reasonable design makes it lightconvenient operation and intuitive reading Features 1 Digital type with direct readings LCD display screen clear and readable No calculations requiredgives direct reading When reading hold down the HOLD button to fix the measurement value and facilitate reading 2 High measuring accuracy The measurement accuracy is 001m 3 Easy to use measure the vertical and lateral rail wear at the same time Position the rail wear gauge on the outer side of the rail Push the vertical and lateral rail wear gauge so that the measuring probe is in contact with the upper surface and inner side of the rail respectivelyThen the vertical and lateral wear of the rail can be read 4 Metric imperial unit 5 Support customize We could customize all kinds wear gauge according to different rail profiles and different measure points 6Fast calibrate Onekey zero clearing function can be quickly calibrated before each use to reach the factory measurement accuracy 7 Magnetic fixed part Strong magnetic fixed part to attach to the rail 8 Rail fillet as measuring base to ensure measure data more accuracy Rail fillet is more clear than rail bottomno dust It could ensure the measure result reliability 9 Portable Handle This product is designed with a handle that is easy to hold which greatly improves the portability of the product It can avoid touching the ruler body directly cause the ruler body to be stained and corroded improve the product service life Model LJGMA Center vertical wear measure range 015mm Lateral wear measure range 025mm Score value 01mm Indication error 0 15mm Supply Customize UIC6060E1 UIC54 54E1 115RE 68TR ect all profiles Block customize block for gauge
Technical Parameters : Travel of X and Y Axes: 800x630 mm; Maximum cutting thickness: 300 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 1130x9500x300 mm; Maximum Work piece weight: 750 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Numerical Control System: X8 ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 2200x1650x1910 mm; Approx. Machine weight: 2980 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Technical Parameters: Travel of X and Y Axes: 630x500 mm; Maximum cutting thickness: 350 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 m mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 1020x640x350 mm; Maximum Work piece weight: 300 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Numerical Control System: X8 ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1960x1620x2160 mm; Approx. Machine weight: 2180 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Technical Parameters Travel of X and Y Axes: 500x400 mm; Maximum cutting thickness: 300 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 850x540x300 mm; Maximum Work piece weight: 450 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Numerical Control System: X8 ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1960x1620x2160 mm; Approx. Machine weight: 1790 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Technical Parameters Travel of X and Y Axes: 400x320 mm; Maximum cutting thickness: 300 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 620x480x300 mm; Maximum Work piece weight: 300 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Numerical Control System: X8 ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1700x1300x2160 mm; Approx. Machine weight: 1480 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Technical Parameters : Travel of X and Y Axes: 800x630 mm; Maximum cutting thickness: 300 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 1130x9500x300 mm; Maximum Work piece weight: 750 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: More than 120 square mm/min; Numerical Control System: X8, HF SYSTEM or HL SYSTEM ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 2200x1650x1910 mm; Approx. Machine weight: 3000 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Technical Parameters : Travel of X and Y Axes: 630x500 mm; Maximum cutting thickness: 350 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 m mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 1020x640x350 mm; Maximum Work piece weight: 300 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: More than 120 square mm/min; Numerical Control System: X8, HF SYSTEM or HL SYSTEM ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1960x1620x2160 mm; Approx. Machine weight: 2200 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Technical Parameters : Travel of X and Y Axes: 500x400 mm; Maximum cutting thickness: 300 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 850x540x300 mm; Maximum Work piece weight: 450 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: More than 120 square mm/min; Numerical Control System: X8, HF SYSTEM or HL SYSTEM ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1960x1620x2160 mm; Approx. Machine weight: 1800 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Technical Parameters : Travel of X and Y Axes: 400x320 mm; Maximum cutting thickness: 300 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 620x480x300 mm; Maximum Work piece weight: 300 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: More than 120 square mm/min; Numerical Control System: X8, HF SYSTEM ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1700x1300x2160 mm; Approx. Machine weight: 1500 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Radiation Detectors A radiation detector is a device that measures nuclear, electromagnetic, or optical radiation. Nuclear radiation detectors identify nuclear radiation by measuring the emission of ionizing radiation of alpha particles, beta particles, and gamma rays. A nuclear radiation detector, also known as a Geiger counter, consists of two main components: the processing electronics and the Geiger tube. Geiger tubes are filled with low-pressure inert gases such as helium, argon, or neon. If radioactive radiation occurs, the noble gases become ionized. An anode inside a Geiger tube records the number of ionized particles that is numerically related to the intensity of radioactive radiation. The radioactivity measurements are then displayed on the LCD screen of a Geiger counter or nuclear radiation detector. Measuring nuclear radioactivity and classifying nuclear radioactivity values is very important. For example, terrestrial gamma radiation is typically measured at 0.03 - 0.3 �µSv/h (microsieverts per hour). This "normal" range of oscillations is determined by naturally occurring radioactive elements in the ground, such as uranium and potassium. To calculate this factor, cosmic radiation must be taken into account. For example, taking cosmic radiation into account, the maximum radioactivity content at the Schneefernerhaus, Germany's highest environmental research station, is equal to approximately 110 �µSv/h. At PCE Instruments you will find three types of Geiger counters or nuclear radiation detection equipment to help you measure radioactivity: 1) alpha radiometers, 2) meters for detecting alpha, beta and gamma radioactivity, and 3) wearable Radioactive meter on the body.
Product Description MOTOR SyncDrive Core, 50Nm, Powered by Yamaha CONTROLLER RideControl Dash, full color LCD screen DISPLAY RideControl Dash, full color LCD screen BATTERY EnergyPak 400Wh FRAME ALUXX Aluminum, Overdrive 1�½ - 1â??" head tube, integrated KS18 kickstand mount FORK SR Suntour XCM ATB Coil 29" 100mm travel, Tapered 1�½ - 1â??" steerer SHOCK - HANDLEBAR Giant Connect TR Riser 31.8x690~750mm GRIPS Giant Sole-O Grip STEM Giant Contact SEATPOST Giant 30.9mm, 2-bolt Micro Adjustable, Forged Aluminium SADDLE Giant Sport PEDALS Aluminum Platform SHIFTERS Shimano Altus FRONT DERAILLEUR - REAR DERAILLEUR Shimano Alivio, 9-speed BRAKES Tektro HD-M275, hydraulic disc, 160/180mm BRAKE LEVERS Tektro HD-M275 CASSETTE Shimano CS-HG200, 11-36T, 9-speed CHAIN KMC e.9 Sport, e-bike optimized CRANKSET FSA Comet E-Bike crank arm set FSA MegaTooth Direct-mount 1X steel 36T BOTTOM BRACKET N/A RIMS Giant GX03V HUBS Giant eTracker Sport, [F] 9mm QR [R] 135mm QR SPOKES Stainless steel TIRES Maxxis Rekon 29x2.4" Wire Bead 60TPI LIGHTING - CARRIER -
Place of Origin: China Classification: Laboratory Centrifuge Brand Name:OEM Model Number: V-GTM12 Max. Speed: 12000rpm Max. RCF:15800xg Max. Capacity:24pcs Capillary*75mm Time Range: 0~99min59s RPM/RCF Convert:Yes Noise (dB)â?¤ 55 Temperature Normal Acc/Dec:10 Kinds Speed Accuracy: �±20r/min Voltage(V/Hz):AC 220V/110V 50HZ/60HZ High speed micro 24capillary hematocrit blood separation lab centrifuge Micro Hematocrit Centrifuge 1.Frame is 3 tiers protection steel jacket, and with the stainless steel chamber, inside protective steel lagging which is simple-compact,light-weight and low noise. 2.Adopt advanced CPU control system realizing microprocessor control, it can control rotate speed, and relative RCF, LCD display which indicates the current speed, time and RCF. 3. Brushless inverter motor with simpler construction,more reliable performance,longer life and quietly running. 4.With many kinds of rotor for your choice. 5.Over speed and imbalance protection, the centrifuge will stop automatically when the above situation happened, with short spin function. 6.Emergency locks under the bottom of the centrifuge which help you open the lid when power off. 7. It is consistent with CE security certification and ISO9001 quality certification. Company Profile
1.CPU: Mediatek MT8788 Octa-core 2.0GHz,4*Cortex-A73+4*A53, 64bit; 2.Operation System: Android 13.0 OS, 3.Display: 10.1 inch Capacitive IPS screen,FHD 1920*1200pixels,400cd/m2 brightness; 4.Two Cameras: Front 5.0M camera, Back 13.0M camera; 5.Memory & Storage: 8GB DDR ram + 256GB ROM; 6.4G Network: Support GSM:B5/B8/B3/B2=850/900/1800/1900Mhz,3G WCDMA: B1/B8=2100/900MHZ, FDD LTE: B1/B3/B7/B20/B28=2100/1800/2600/800/700MHZ, Other bands are customizable for bulk order; 7.Wireless network: WIFI:802.11 a/b/g/n/ac 2.4G+5.0GHZ Dual-band wireless and blutooth V5.0; 8.Battery: Built-in 3.8V/8000mAh Lithium Battery, 9.I/O Ports: 1*Type-C USB (OTG),1*Sim Card Slot,1*TF card slot,1*Earphone jack; 10.Rugged Durability: Waterproof and dustproof rate:IP68; Ruggedness:comply with 1.0 Meter dropproof; 11.Navigation & Position: Support GPS+Glonass+ Beidou; 12.NFC: 13.56Mhz,support ISO14443A/B/15693,Optional; 13.Handbelt:Yes; 14.Stylus Pen: Active Stylus pen, is optional. 15.Dimension: 250.6*164.8*13.5mm.
1.CPU: Mediatek MT6762 Octa-core 2.0GHz; 2.Operation System: Android 9.0 OS with google service, 3.Display: 10.1 inch Capacitive Multi-touch IPS screen,1920*1200 Pixels; 4.Two Cameras: Front 2.0M camera (front 5M camera is optional), Back 8.0M camera (back 13M camera is optional). 5.Memory & Storage: 4GB ram DDR + 64GB EMMC; 6.4G Network: Support GSM:B5/B8/B3/B2=850/900/1800/1900Mhz,3G WCDMA: B1/B8=2100/900MHz; 4G FDD LTE: B1/B3/B7/B20=2100/1800/2600/800MHZ. 7.Wireless network: WIFI:802.11 a/b/g/n 2.4G+5.0GHZ Dual-band wireless and blutooth4.0; 8.Battery: Built-in 4.2V/10000mAh Lithium Battery, 9.I/O Ports: 1*Micro USB (OTG),1*Sim Card Slot,1*TF card slot,1*Earphone jack,; 10.Rugged Durability: Waterproof and dustproof rate:IP68; Ruggedness:comply with 1.0 meter dropproof; 11.GPS: Support GPS+ Beidou or GPS+Glonass; 12.NFC Module (optional): Frequency is 13.56Mhz, is optional; 13.Fingerprint module(optional): Support unlock,is Optional ; 14.Barcode scanner (optional): 2D Barcode scanner Newland EM3296, is optional; 15.Temperature & Humidity: workd Temp. -20-60 degree, Storage temp.: -30-70 degree; Humidity:5% -95%. 16.Dimension: 275*175*13.5mm, Net weight: about 865g.
1.CPU:Mediatek MTK6789 Octa-core Helio G99 2.0GHz, 6nm process; 2.Operation System: Android 12.0; 3.Display: 6.78 inch Capacitive Multi-touch screen,IPS FHD+ 2400*1080 Pixels; 4.4G LTE Networks: GSM: B5/B3/B8/B2,WCDMA:B1/B2/B4/B5/B6/B8/B19, 4G:TDD:B34/B38/B39/B40/B41,4G FDD:B1/B2/B3/B4/B5/B7/B8/B12/B13/B17/B18/B19/B20/B25/B26/B28(A+8)/B66/B71 5.Four Cameras: Front 20Mpxls camera, Back 64MP+20MP(Night vision camera)+2Mp Macro Cameras. 6.Memory & Storage: 12GB ram + 256GB ROM; 7.Wireless Network:802.11 a/b/g/n/ac 2.4G+5G Dual-band wifi wireless and Blutooth 5.0; 8.GPS:Support GPS and GLONASS+Beidou; 9.Battery: 3.85 V/9800mAh Lithium Battery; 10.Tri-Proof Rate: IP68 Waterproof and dustproof, DropProof Rate: GIL-STD-810G. 11.Sensors:G-sensor,Light sensor,Proximity sensor,E-Compass, Gyroscope Sensor,ect.; 12.Side Fingerprint & Face recognition unlock function: Support; 13.I/O Port: Type-C USB; 14.NFC: 13.56Mhz; 15.Dimension: 177.3*84.3*18.4mm.
