Product Name High pressure safety injection pump Introduction As appraised by the national energy organization on October 10, 2010, the engineering prototype is at the domestic leading level at the aspects of efficiency, vibration, and other indicators. MOQ 1 Piece
Product Name Residual Heat Removal Pumps Introduction: An normal residual heat removal pump - one of the main devices in a normal residual heat removal system (RNS) in an auxiliary plant of an AP1000 nuclear power plant, has the following main features: It extracts the heat generated at shutdown of a reactor coolant system. After the start-up of an automatic pressure system (ADS), it provides low pressure replenishment water from the feeding tank of a spent fuel pool cooling system (SFS) to RCS. When needed it discharges the residual heat from refuelling water tank built in the containment. After an accident it provides a long-term refuelling channel to RCS Other features: shutdown purification, low temperature overpressure protection, spent fuel pool cooling Origin China MOQ 1 NOS
Commodity: Refined Cane Sugar ICUMSA 45 Origin: Brazil Payment Terms: Standby Letter of Credit (SBLC) via SWIFT & payment to the Seller's bank via TT, MT103. 100% in FULL and to be paid against the Bill of Lading and shipping documents at the port of origin. Delivery Terms: CIF Packing: 50 kg Poly Bags in new polypropylene bags of 50kg net weight, with interior polyethylene liner, loaded into containers.
Spare parts for refrigeration, chillers and washing machines, LPG gas..Distributor
Gypsum powder or plaster is a building material that features similar properties to mortar or cement. The powder is created by heating gypsum a soft naturally occurring mineral to roughly 300 degrees Fahrenheit (150 °C) and then mixing with water. The resulting paste hardens as it cools, developing a relatively soft, pliable finished product. Unlike mortar or cement, which dry much harder. It can be sanded or otherwise manipulated once cured, making a valid option for aesthetic, non-load bearing purposes.
Blast Furnace Slag is a by-product of the manufacturing of steel in a blast furnace. Initially, in its molten form, it is diverted to a granulator where it is quenched with water and rapidly cooled to form glassy, non-metallic granules which are silicates and aluminosilicates of calcium. These granules are dried to produce Granulated Blast Furnace Slag (GBFS) and then ground to a suitable fineness to produce Ground Granulated Blast Furnace Slag (GGBFS). When used as a cementitious material in concrete, GGBFS enhances long-term performance and durability characteristics while reducing life-cycle and maintenance costs.
IRAN BITUMEN GRADE 60/70 Bitumen penetration grade 60/70 is semi-hard penetration grade bitumen using as paving grade bitumen suitable for road construction and repair also for the production of asphalt pavements with the below technical specification. This grade of bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses.Bitumen 60/70 is most used bitumen grade and basic material for all other bituminous products.
Product introduction Propylene Carbonate is colorless,odorless or faint yellow transparent liquid,soluble in water and carbon tetrachloride,dissolve in diethyl ether,acetone,benzene and so on.It is a kind of excellent polar solvent.It is mainly used for macromolecule operation,gas separation industry and electrochemistry.ALso,it can be used for plasticizer,spinning solvent,etc. Product use 1) This product is dissolved in water and carbon tetrachloride, diethyl ether, acetone, benzene is miscible, is a good solvent. 2) In the battery industry, be a lithium battery good medium; 3) Can be used as an efficient solvent for removal of liquefied petroleum gas, oil gas, oil gas and ammonia in the raw gas of carbon dioxide; 4) In the textile industry of additives and for use as synthetic fixing agents; in the polymer industry as a polymer in a solvent and plasticizer; can be used as green solvent in cosmet ics; Product name Propylene Carbonate CAS NO 108-32-7 Index Color(Pt-Co) 20 ~ 50 Purity,% 99.9 ~ 99.5 Water 0.02 ~ 0.1 Density g/cm3 1.200~1.210 Packing Iron Drum, IBC drum, Isotank.
SILICA SAND SEA SAND RIVER SAND
Gas oil D2 l-0.2-62 gost 305-82, LNG gost 5542-87, lpg gost 20448-90 (50% propane 50% tane), fuel oil mazut m100- gost 10585-105, fuel oil mazut m100- gost 10585-85, fuel oil mazut m100- gost 10585-75, fuel oil mazut m100- gost 10585-99, jet fuel gost 10227-86 grade ts-1.
Jet fuel, d2,crude oil, light crude oil, kerosene oil, naphtha, bitumen .Export
PE pipe production line is suitable for PE/HDPE/PP pipe making, PE water pipe, gas pipe, drain pipe and so on. This production line adopts reasonable design, absorbing safe producing technology, acquiring CE certificate, take the features of advanced, reliable and applied together, and provide strong certification for high-quality plastic tube for customers.1- This pipe is mainly used for producing garden pipes, water supply pipe and drainage in construction, cable etc.2- Thereâ??re medium density polyethylene pipe and high density polyethylene pipe. SDR11 divided according to the thickness and SDR17.6 series. The former applies to transport gaseous artificial gas, natural gas, liquefied petroleum gas, which is mainly used to transport natural gas.PE Pipe Production Line contains single screw extruder, mould, co-extruder (for mark line), calibrating tank, cooling tank, haul-off, cutter and stacker.Diameter range is 16mm-800mm, which can be changed into inch standard to meet clientsâ?? special requirement. Pipe range16-63mm20-110mm75-160mm90-250mm110-315mm160-450mm315-630mm500-800mmExtruder45mm60mm75mm75mm90mm90mm120mm150mmExtruder powerAC30kwDC75kwDC110kwDC110kwDC160kwDC160kwDC280kwDC335kwExtrusion capacity60-100kg100-150kg250-300kg250-300kg350-400kg350-400kg650-700kg850-900kgMax. production speed10m/min6m/min6m/min6m/min3 m/min1.2m/min0.9m/min0.7m/min
Rotary Rack Oven Rotation of trolleys By using diesel or Lpg gas Material used stainless steel 304, mild steel- Cr and Hr.
Stainless Steel Pipes for Petrochemical Engineering Stainless Steel Industry Pipe LNG Stainless Steel Oil Gas Large Diameter Pipe Tube Industrial Stainless Steel Pipe Large Diameter Stainless Steel Pipe Petroleum and chemical industry often use acid, alkali, salt and other corrosive fluids,  and stainless steel welded pipes contains chromium, nickel and other subgroup  metal elements whose characteristics of corrosion resistance and antioxidation can  ensure that conveying fluid is not contaminated and pipes will not be eroded by fluid. So stainless  steel pipes are primarily used for heating piping, heat exchanger  piping, cooler tube, tower coils pipe, hydrogenation process pipeline, synthesis reactor tube in synthesis of  methanol device and regeneration of catalyst cooler tube in ethylene plant and etc.
Jet fuel, aviation kerosene, en590 10ppm, bitumen, diesel oil..Direct agent
Petroleum products en 590 10 ppm ; jet fuel a1 ; bitumen and steam coal.
En590 diesel and jet a1 fuel.
EN590-10PPM No sanctioned source: Kazakhstan, Azerbaijan, Georgia or Qatar. CONTRACT TERMS: 12 MONTHS MINIMUN QUANTITY (WITH ROLLS AND EXTENSION) PAYMENTS TERM MT103 OR SBLC INSPECTION BY: SGS, INTERTEC, CAMIN CARGO OR SIMILAR. COMMODITY: EN590/ULSD < 10PPM First Lift: 50,000-100,000 Metric Tons Contract: 100,000-500,000 Metric Tons per Month X 12 Months with R&E FOB Price: Gross $530.00 USD /Net $510.00 USD per Metric Ton
PURCHASE PROCEDURE 1. Buyer issues a Letter of Intent (LOI) or Irrevocable Corporate Purchase Order (ICPO) + KYC and RWA 2. The seller issues a complete corporate offer (FCO). 3. The buyer signs and seals the FCO page and returns it to the seller. 4. Seller issues a draft Sales Contract (SPA) which will incorporate all terms and conditions. 5. Buyer signs and seals ALL pages of the SPA and returns it to Seller. 6. Seller completes the SPA, signs and seals and issues a PROFORMA INVOICE. 7. The Buyer's Bank issues a draft SBLC (MT760) or DLC (MT700), which seller's bank reviews and approves. 8. The "proof of product" will be sent within 5 bank business days, when they send the first MT to our bank, documents or proof of the product are sent, ONLY FROM BANK TO BANK. 9. Within 3 international banking days, Buyer's Bank issues irrevocable statements, Transferable Confirmed SBLC (MT760) or DLC (MT700), to seller's bank (from top 50 banks) 10. The buyer will be invited to the port of loading for inspection during loading in Buyer's expenses. 11. Shipments will start within 40-45 days (for sugar) AND for chicken 20-25 days, after approval of the SBLC (MT760) or DLC (MT700) by the Seller Bank. 12. All original documents will be sent to the buying bank through the selling bank via DHL. 13. Payment is made to Seller's bank by Buyer's bank immediately after the material is loaded and an SGS audited report� is� provided.
*1.*Origin product No sanctioned source: Kazakhstan, Azerbaijan, Georgia or Qatar. Dip and pay Commodity: EN590-10PPM Origin: Non-Sanctioned Countries FOB Fujairah Tank Take Over Net Price / Gross Price: $645/ $655 Trial Order Quantity: 200,000 MT Contract Quantity: Up To 400,000 MT per month Ã?? 12 months DIP & PAY TRANSACTION PROCEDURE 1. Buyer issues ICPO along with company registration certification, data page of Buyer's passport copy, or any I.D. 2. Seller issues Commercial Invoice. 3. Buyer signs CI and returns it to Seller with MT199/999 of Proof of payment as per Annexure "A", or a Bank Confirmation Letter delivered by Swift. 4. Seller releases POP cleared of Legalization and Notarization charges to Buyer for verification: A. Fresh SGS 48 hours id B. Certificate of Origin C. Company RegistrationCertificate D. Product Quality Passport E. Statement of Product Availability F. Unconditional Dip Test Authorization G. ATV Physically (Authorization to Physically Verify) 5. Buyer approves the above and makes payment by MT103/TT for the total value of the product as per CI and takes over the seller's tank.
