CNC Controller for Lathe Turning Machine--GREAT-150iT-II: >Controllable axes: 2-5 axes >Linkage axes: 2-5 axes linear, 2 axis arc linkage >32MB user storage >8.4 inch TFT Colorful display with E-type subpanel >Real-time and all-round self diagnosis >Feed per minute and feed per revolution >Metric/Inch thread, straight thread, taper thread, end face thread, variable pitch thread, high speed thread, continuous tread; >Various interpolation commands and M, S, T function >Max 99 tools management >Chinese/English language >Parameter package and software backup/upgrade Absolute Superiority: 1) Speed: >Max rapid traverse: 60m/min >Max cutting speed: 20m/min >Program preview: 1000 blocks 2) Precision: >Screw pitch compensation, improving machining precision to the most >Pulse equivalent: Max precision can set as 0.0001mm 3) Interface: A) Embeded PLC with I/O number 118 x 46, users can free to edit B) USB port supply DNC function C) RS232 port supply DNC function by transmit rate 115200bit D) MPG on board or separate MPG are available E) Dual channel control of spindle speed conversion, can control two spindle Units and diverse tool magazine. 4) Operation: A) Full-screen editing interface and foreground-background processing operation, which can do programming, parameter adjustment etc at same time B) 2D/3D graphic preview or simulating operation before machining, coordinates display, free shifting between 2D/3D graphic; Graphic can scale up/scale down, translate and rotate freely. C) Multilevel passward protection, such as program, parameter protection to convenient equipment management; D) Start machining at random block or tool number E) Compatible with popular foreign CNC system in instruction code and most program can run directly without amendment. 16kgs including all components
Roll turning lathe slotting milling machine.
precision cnc lathe Turning Center cnc lathe turning center machine M series-precise linear guide-way turning center with 5 axis is a new high-end model we just approached, that integrating the compound processing competence like turning, milling, drilling and tapping as one set. *BODY-With international advanced vertical bed body structure in 90º, and with custom-made excellent resin sand and die-casting at a whole, strict thermal aging treatment, to make sure the high stiffness. * SPINDLE- High precision and sleeve-style independent spindle structure, and high speed hydraulic swing system,to guarantee the high rotating speed. * High precision linear guide-way and ball screw, with central and pre-stretching ball screw assembly method, for realizing the precise turning with tolerance of µ level. *With 90º vertical bed body structure, will bring more processing space, and the chips-removing capability will be better. * The effective utilization with the 4 axis accurate linkage and compound cutters can realize the turning, milling, drilling and tapping so on technology processing at one time finishing . *The fifth axis configuration for the vice-spindle or tailstock spindle makes the M-series turning center' function be stronger. ain parameters Unit M25 M36 M350 MAX cutting diameter mm Ï?300 Ï?300 Ï?300 Max. turning length mm 330 330 330 Max. bar through-hole mm 21(25) 26ï¼?35ï¼? 40 Axis Stroke X-axis travel mm 230 230 230 Z-axis travel mm 330 330 330 Y-axis travel mm 420 420 420 W1-axis travel mm 250 250 250 W2-axis travel mm 310 310 310 Rapid Traverse X//Z/Y/W1/W2-axis m/min 20 20 20 main spindle Spindle nose size N/A A2-4 A2-5 A2-5 servo motor power kW 3.7/5.5 3.7/5.5 5.5/7.5 Spindle speed range rpm 0ï½?5500 0ï½?5000 0ï½?4500 Work piece clamping method 25 colletï¼?4'hydraulic chuck) 36colletï¼?5'hydraulic chuck 42 collet ï¼?6'hydraulic chuckï¼? secondary spindle spindle nose size N/A A2-4 A2-4 A2-4 servo motor power kW 3.7KW 3.7KW 3.7KW Spindle speed range rpm 0ï½?5000 0ï½?5000 0ï½?5000 Spindle speed range CR30A4 CR30A4 CR30A4 tail stock tail travel mm 100 100 100 tail collet diameter mm Ï?80 Ï?80 Ï?80 taper type N/A MT4 MT4 MT4 quantites of tools tool number 5ï¼?10ï¼? 5ï¼?10ï¼? 5ï¼?10ï¼? tool pattern 4ï¼?8ï¼? 4ï¼?8ï¼? 4ï¼?8ï¼? radial direction tool number 3 3 3 axial direction tool number 3 3 3 tool board tool board pattern combined tool combined tool combined tool central height of radialcircle mm 70 70 70 standard square size of the out cutting tool mm 16*16 16*16 16*16 diameter of the boring rod mm 25 25 25 Accuracy X\Z axis repeating postioning accuracy mm 0.002 0.002 0.002 Others Cooling motor L 120 120 120
(1). Model: CNC315S (2). Max.turning length: 1500mm (3). Max. turning diameter: 300mm (4). Spindle power: 5.5kw (5). Quantity of tools: 2( one for rough turning, one for finish turning ,work synchronously) (6). Quantity of spindle: 1 (7). Spindle speed: 3500 rpm (8). Motor: stepped motor (9). Transmission:Imported high precision ball screw and linear square guide rail (10). Control system: CNC or DSP (11). Support command: G code (12). Software: Type3/Artcam/Ucancam/Caxa/Mastercam/UG/JD/mach (13). Voltage: 380 V/50 Hz (14). Machine dimension: 2700mm*1300mm*1300mm (15). Weight: 1450kg
Automatic Lathe Turning Part JST has supplied the service of automatic lathe machining / swiss type lathe turning for over 10 years, we own 50 sets of automatic lathe (5 spindles cam lathe). The material we work are 303 stainless steel, free-cutting steel, brass, aluminum and plastic; in addition, we can also do the secondary process and finish treatment in house. Most of these swiss type lath machining parts were used in the field of electronics, medical, instruments, auto parts, etc., we could also do the design according to your idea or sketch. JST Industry is a professional manufacturer of CNC Milling and CNC Turning, Product Description Name & Description Automatic Lathe Turning Part Material 1215 Finish Treatment Zinc Plating Tolerance +/-0.02MM Application Electronics Packaging & Delivery Packaging: 50 PCS in a small PE bag, 200 PCS in a big PE bag, 15 KGS in a carton. Delivery: The samples delivery is about 15 days and the lead time for mass production is about 30-45 days.
turning wheel lathe CKL35 Vertical CNC Wheel Repair Lathe CKL-35 Applications Vertical Wheel Repair Lathe CKL-35 is the best wheel CNC machine to repair and process the alloy car wheel surface, center hole and rim, etc. About HAISHU Machinery As the professional CNC machine designer and manufacturer, Taian HAISHU Machinery Co., Ltd (Haishu Machinery) is the high-tech enterprise specialized in CNC machine development, production, sales and service since 2001. We have more than 30 professional talented CNC experts and more than 12,000 square meters manufacturing factory. More than 16 series 80 kinds of CNC machines and related parts had been manufactured to satisfy your pumping requirements. Our high quality and innovative CNC wheel machine products include wheel CNC machine, wheel repair machine, brake drum lathe and other customized CNC machines custom CNC equipment for special requirements. HAISHU Machinery is not only manufacturing best quality CNC wheel machine products but also providing custom design, fabrication and after sale service. If you have any questions or inquiries, please fill and submit the following form, we will reply as soon as possible.
CQ5240E Double column Vertical Lathe for sale 1. Modularization design and the general products are mature, stable and reliable. 2. Excellent casting (HT300) is treated by heat ageing. 3. The beam guide is handled by supersonic frequency induction hardening and it adopts rolling-sliding compound type. The vertical tool holder utilizes ductile iron materials while the sliding surface uses sticking plastic treatment with a durable performance. 4. Manual lubrication pump realizes oiling lubrication of different lubricating parts. 5. High-quality famous and exceptional electric components and Japan Omron PLC control guarantee high reliability. 6. The guide can be divided into such two types as static pressure and purely static pressure. The bearing of dynamic and static pressure is 10 ton; the purely static pressure adopts constant current for oil supply with 16-20 tons of bearing. 7. Independent hydraulic stati on facilitates adjustment, repair and maintenance. 8. Grating digital display device is equipped. 9. JB/T4116-96 precision test standard of vertical lathe is performed. JB/3665-96 technical condition of vertical lathe is performed. 10. Complete processing and assembly process and strict quality control flow ensure the products reach perfect and first0class perfect quality. 11. High-precision speed-changing gear (Grade 6 precision) and high-precision gear grinding spiral bevel gear (Grade 6 precision) are featured with of low noise and stable operation. 12. One-year quality assurance service is granted (installation, debugging and after-sales service).
CK5126E CNC Single Column Vertical Lathe 1. Super-high performance-price ratio and reasonable price. 2. Suspended button station is adopted and the electric cabinet and lathe body are integrated. 3. Hardening beam, hardening T type sliding ram (square sliding ram is optional), together with the sticking plastic guide are adopted. 4. Grade 16 machinery variable speed is taken as the standard configuration, and five-angle tool carrier or square knife station is designed. 5. Siemens 802C system (other systems are optional) 6. Closed protection of beam and automatic lubricating of different lubrication parts. 7. JB/T9934.1-1999 precision inspection of CNC vertical lathe is performed JB/T9934.2-1999 technical specification of CNC vertical lathe 8. Optional Features: Frequency conversion stepless speed regulation, power-driven tool post and heighten lathe body etc. 9. One-year quality assurance, perfect after-sale service.
YM-CK5126Epro CNC Single Column vertical lathe 1. The product is in Pro version with professional design, being an improved product with a huge market sales volume. CK5112Epro and CK5116Epro adopt the identical modules (identical beam section, beam slide base, rotary slide base, ram, servo motor and servo driver) which are extremely suitable for heavy-load cutting�?? 2. The working platform owns the function of waterproof and it is not necessary to worry that cutting fluid infiltrates into it. The design of square shaped working platform facilitates the collection of cutting fluid.�?? 3. Siemens 802DSL system (user can appoint other system) is adopted; servo motor and servo driver all utilize Siemens products. 4. Beam guiding surface is conducted with supersonic frequency quenching treatment (higher than HRC50) with the characteristics of durable service; the square ram adopts ductile iron material (QT600) while the sliding surface is sticking with the soft plastics belt, which can prolong more the overhauling period for over 10 years. 5. The independent electric cabinet is equipped with air conditioner for refrigerating, which prolongs the reliability and service life of the electric parts significantly, facilitates repair and maintenance, and is free from the influence of machine vibration. 6. P3 high-precision lead screw produced by Nanjing Process or Taiwan HIWIN (P1 is the highest and P6 is the lowest degree), and imported bearing support. 7. The beam is protected by the white steel, and all the lubrication parts are supplied with certain amount of oil by the automatic lubricating pumps regularly. 8. Four-grade machine variable speed + motor stepless variable speed, wide range of constant power and large torque. 9. JB/T9934.1-1999 precision inspection of CNC vertical lathe is performed  JB/T9934.2-1999 technical specification of CNC vertical lathe 10. Owning constant line speed turning, cutting thread and other functions 11. High-precision transmission gear (6 grades) and high-precision spiral bevel gear (6 grades) with low noise and high rotary precision. 12. All the castings are made of HT300 grey cast iron (ram is made of ductile iron) which is treated with artificial heat ageing, high-quality processing and improved assembly process. All the functional parts and electric parts are in high quality with high reliability. 13. Complete fitting configuration allows the user to put into operation only by preparing cutting tool and measuring tool. The improved after-sales service and 2-year quality assurance service are available. 14. Optional parts: Germany Mecano button station, constant flow hydrostatic guideway, oil temperature icebox, constant temperature refrigerator, grating closed loop, heighten lathe body, lengthen ram etc.
CK5225E Double Column CNC Vertical Lathe 1. Such series of products adopt modularization design and the function can be selected arbitrarily. The product design is mature and reliable, thus, large amount of users have selected them. 2. With 100% full manual operation function, the common operator of vertical lathe can operate it as well without worrying about failure to manipulate machine tool due to the incapacity of programming. In addition, it is convenient and practical. 3. The working platform adopts four-step machinery + big power DC motor stepless speed control (AC frequency conversion can be selected) to realize rotary with large torque and own the turning function with constant line rate. 4. Excellent casting (HT300) is handled by heat aging. 5. The beam guide is handled by supersonic frequency induction hardening and it adopts rolling-sliding compound type. The vertical tool holder utilizes square type ram (QT600-3), which can realize heavy cutting. The sliding surface uses sticking plastic treatment with durable performance. 6. The beam guide, ram guide and vertical column guide adopt automatic lubrication pump for automatic timing and quantitative lubricating. 7. The ball screw adopt such type of Nanjing process or Taiwan HIWIN P3 level high precision while the lead screw uses imported bearing (Germany INA) for supporting. 8. The guide can be divided into such two types as static pressure and purely static pressure. The bearing of dynamic and static pressure is 10 ton; the purely static pressure adopts constant current for oil supply with 16-20 tons of bearing. 9. Independent hydraulic station is possessed, which facilitates adjustment, repair and maintenance. 10. The precision performs JB/T9934.1-1999 precision test of CNC vertical lathe as well as JB/T9934.2-1999 technical condition of CNC vertical lathe 11. High-standard processing and assembly process ensure the perfect product quality. 12. High-precision variable speed gear (Grade 6) and high-precision spiral bevel gear (Grade 6 gear grading) are featured with low noise and high rotary precision. 13. It is developed independently by the company. 14. Optional functions: constant current and static pressure, grating and closed loop, heightening the machine tool and ram and function of cutting thread etc.
CK5231E Double Column CNC Vertical Lathe china Such series of products adopt modularization design and the function can be selected arbitrarily. The product design is mature and reliable, thus, large amount of users have selected them. 2. With 100% full manual operation function, the common operator of vertical lathe can operate it as well without worrying about failure to manipulate machine tool due to the incapacity of programming. In addition, it is convenient and practical. 3. The working platform adopts four-step machinery + big power DC motor stepless speed control (AC frequency conversion can be selected) to realize rotary with large torque and own the turning function with constant line rate. 4. Excellent casting (HT300) is handled by heat aging. 5. The beam guide is handled by supersonic frequency induction hardening and it adopts rolling-sliding compound type. The vertical tool holder utilizes square type ram (QT600-3), which can realize heavy cutting. The sliding surface uses sticking plastic treatment with durable performance. 6. The beam guide, ram guide and vertical column guide adopt automatic lubrication pump for automatic timing and quantitative lubricating. 7. The ball screw adopt such type of Nanjing process or Taiwan HIWIN P3 level high precision while the lead screw uses imported bearing (Germany INA) fo r supporting. 8. The guide can be divided into such two types as static pressure and purely static pressure. The bearing of dynamic and static pressure is 10 ton; the purely static pressure adopts constant current for oil supply with 16-20 tons of bearing. 9. Independent hydraulic station is possessed, which facilitates adjustment, repair and maintenance. 10. The precision performs JB/T9934.1-1999 precision test of CNC vertical lathe as well as JB/T9934.2-1999 technical condition of CNC vertical lathe 11. High-standard processing and assembly process ensure the perfect product quality. 12. High-precision variable speed gear (Grade 6) and high-precision spiral bevel gear (Grade 6 gear grading) are featured with low noise and high rotary precision. 13. It is developed independently by the company. 14. Optional functions: constant current and static pressure, grating and closed loop, heightening the machine tool and ram and function of cutting thread etc.
1.The super-high quality and mass remarkably surpass the domestic first-class factories. 2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC�?�50) while the sliding surface of guide is treated with sticking plastic (including inclined veneers and pressure plate). The precision of the product can be maintained for a long time and the cycle for big repair can be extended as long as more than 10 years. 3.EXcellent casting comes from the same factory that the domestic big factories utilize (all are in type of HT300) and the artificial heat ageing is carried out. The casting can never be carried out with weight-reducing treatment, the weight of the whole machine accords with the standard one. 4.five-angle tool carrier adopts high-precision rat gear for positioning and for all 120 pieces, super-strong stiffness. (the traditional five piece positioning plate can be compared with it) 5. 2 axial digital display is taken as the standard confirmation (4 axial digital display type will be exported) 6.The electrics adopt Japan Omron PLC control and the electric components utilize the components with ultra-high quality , specification (CE standard) assembly process, in addition, the electrics of the whole machine owns super-high reliability. 7.ELectric rotary valve, Grade 16 machinery variable speed make the device convenient, smart and reliable. 8.High-precision gear grinding gear and gear grinding spiral bevel (Grade 6 precision) are featured with low noise and stable operation. 9.JB/T4116-96 precision test standard of vertical lathe is performed JB/3665-96 technical condition of vertical lathe is performed. 10.Advanced and perfect processing and assembly process forge excellent quality. 11.Accessory configuration is complete and only the user prepares for the knife and measuring tool, the operation can be started immediately. Perfect after-sales service (pre-sales, in-sales, after-sales, installation, debugging, training and maintenance etc.) in addition, one-year quality assurance service is granted. 12.Optional configuration: rolling working platform, Germany Mecano button station, heightening lathe and prolonging ram and square ram etc.
YM-CK5112Epro Semi-closed CNC Vertical Lathe 1. This machine tool is based on the original CK5116Epro increased semi-closed protection, scraps discharge, scraps discharge car, pump water workpiece cooling, oil temperature refrigeration, Germany Mecano button station etc. features, has appearance generous and high grade. 2. The working platform owns the function of waterproof and it is not necessary to worry that cutting fluid infiltrates into it. The design of square shaped working platform facilitates the collection of cutting fluid. 3. Siemens 802DSL system (user can appoint other system) is adopted; servo motor and servo driver all utilize Siemens products. 4. Beam guiding surface and T model ram guideway is conducted with supersonic frequency quenching treatment (higher than HRC50) with the characteristics of durable service; the sliding surface is sticking with the soft plastics belt, which can prolong more the overhauling period for over 10 years. 5. The independent electric cabinet is equipped with air conditioner for refrigerating, which prolongs the reliability and service life of the electric parts significantly, facilitates repair and maintenance, and is free from the influence of machine vibration. 6. P3 high-precision lead screw produced by Nanjing Process or Taiwan HIWIN (P1 is the highest and P6 is the lowest degree), and imported bearing support. 7. The beam is protected by the white steel, and all the lubrication parts are supplied with certain amount of oil by the automatic lubricating pumps regularly. 8. Four-grade machine variable speed + motor stepless variable speed, wide range of constant power and large torque. Four station electric tool post, automatic exchange tool, convenient and practical. 9. JB/T9934.1-1999 precision inspection of CNC vertical lathe is performed JB/T9934.2-1999 technical specification of CNC vertical lathe 10. Owning constant line speed turning, cutting thread and other functions 11. High-precision transmission gear (6 grades) and high-precision spiral bevel gear (6 grades) with low noise and high rotary precision. 12. All the castings are made of HT300 grey cast iron (ram is made of ductile iron) which is treated with artificial heat ageing, high-quality processing and improved assembly process. All the functional parts and electric parts are in high quality with high reliability. 13. Complete fitting configuration allows the user to put into operation only by preparing cutting tool and measuring tool. The improved after-sales service (Before-sale, after-sale, install, commissioning, training and guarantee) and 2-year quality assurance service are available. 14. Optional parts: Constant flow hydrostatic guideway, grating closed loop, heighten lathe body, lengthen ram etc.
CK5225E Double Column CNC Vertical Lathe 1. Such series of products adopt modularization design and the function can be selected arbitrarily. The product design is mature and reliable, thus, large amount of users have selected them. 2. With 100% full manual operation function, the common operator of vertical lathe can operate it as well without worrying about failure to manipulate machine tool due to the incapacity of programming. In addition, it is convenient and practical. 3. The working platform adopts four-step machinery + big power DC motor stepless speed control (AC frequency conversion can be select ed) to realize rotary with large torque and own the turning function with constant line rate. 4. Excellent casting (HT300) is handled by heat aging. 5. The beam guide is handled by supersonic frequency induction hardening and it adopts rolling-sliding compound type. The vertical tool holder utilizes square type ram (QT600-3), which can realize heavy cutting. The sliding surface uses sticking plastic treatment with durable performance. 6. The beam guide, ram g uide and vertical column guide adopt automatic lubrication pump for automatic timing and quantitative lubricating. 7. The ball screw adopt such type of Nanjing process or Taiwan HIWIN P3 level high precision while the lead screw uses imported bearing (Germany INA) for supporting. 8. The guide can be divided into such two types as static pressure and purely static pressure. The bearing of dynamic and static pressure is 10 ton; the purely static pressure adopts constant current for oil supply with 16-20 tons of bearing. 9. Independent hydraulic station is possessed, which facilitates adjustment, repair and maintenance. 10. The precision performs JB/T9934.1-1999 precision test of CNC vertical lathe as well as JB/T9934.2-1999 technical condition of CNC vertical lathe 11. High-standard processing and assembly process ensure the perfect product quality. 12. High-precision variable speed gear (Grade 6) and high-precision spiral bevel gear (Grade 6 gear grading) are featured with low noise and high rotary precision. 13. It is developed independently by the company. 14. Optional functions: constant current and static pressure, grating and closed loop, heightening the machine tool and ram and function of cutting thread etc.
CK5225E Double Column CNC Vertical Lathe 1. Such series of products adopt modularization design and the function can be selected arbitrarily. The product design is mature and reliable, thus, large amount of users have selected them. 2. With 100% full manual operation function, the common operator of vertical lathe can operate it as well without worrying about failure to manipulate machine tool due to the incapacity of programming. In addition, it is convenient and practical. 3. The working platform adopts four-step machinery + big power DC motor stepless speed control (AC frequency conversion can be selected) to realize rotary with large torque and own the turning function with constant line rate. 4. Excellent casting (HT300) is handled by heat aging. 5. The beam guide is handled by supersonic frequency induction hardening and it adopts rolling-sliding compound type. The vertical tool holder utilizes square type ram (QT600-3), which can realize heavy cutting. The sliding surface uses sticking plastic treatment with durable performance. 6. The beam guide, ram guide and vertical column guide adopt automatic lubrication pump for automatic timing and quantitative lubricating. 7. The ball screw adopt such type of Nanjing process or Taiwan HIWIN P3 level high precision while the lead screw uses imported bearing (Germany INA) for supporting. 8. The guide can be divided into such two types as static pressure and purely static pressure. The bearing of dynamic and static pressure is 10 ton; the purely static pressure adopts constant current for oil supply with 16-20 tons of bearing. 9. Independent hydraulic station is possessed, which facilitates adjustment, repair and maintenance. 10. The precision performs JB/T9934.1-1999 precision test of CNC vertical lathe as well as JB/T9934.2-1999 technical condition of CNC vertical lathe 11. High-standard processing and assembly process ensure the perfect product quality. 12. High-precision variable speed gear (Grade 6) and high-precision spiral bevel gear (Grade 6 gear grading) are featured with low noise and high rotary precision. 13. It is developed independently by the company. 14. Optional functions: constant current and static pressure, grating and closed loop, heightening the machine tool and ram and function of cutting thread etc.
CK5231E Double Column CNC Vertical Lathe china Such series of products adopt modularization design and the function can be selected arbitrarily. The product design is mature and reliable, thus, large amount of users have selected them. 2. With 100% full manual operation function, the common operator of vertical lathe can operate it as well without worrying about failure to manipulate machine tool due to the incapacity of programming. In addition, it is convenient and practical. 3. The working platform adopts four-step machinery + big power DC motor stepless speed control (AC frequency conversion can be selected) to realize rotary with large torque and own the turning function with constant line rate. 4. Excellent casting (HT300) is handled by heat aging. 5. The beam guide is handled by supersonic frequency induction hardening and it adopts rolling-sliding compound type. The vertical tool holder utilizes square type ram (QT600-3), which can realize heavy cutting. The sliding surface uses sticking plastic treatment with durable performance. 6. The beam guide, ram guide and vertical column guide adopt automatic lubrication pump for automatic timing and quantitative lubricating. 7. The ball screw adopt such type of Nanjing process or Taiwan HIWIN P3 level high precision while the lead screw uses imported bearing ( Germany INA) for supporting. 8. The guide can be divided into such two types as static pressure and purely static pressure. The bearing of dynamic and static pressure is 10 ton; the purely static pressure adopts constant current for oil supply with 16-20 tons of bearing. 9. Independent hydraulic station is possessed, which facilitates adjustment, repair and maintenance. 10. The precision performs JB/T9934.1-1999 precision test of CNC vertical lathe as well as JB/T9934.2-1999 technical condition of CNC vertical lathe 11. High-standard processing and assembly process ensure the perfect product quality. 12. High-precision variable speed gear (Grade 6) and high-precision spiral bevel gear (Grade 6 gear grading) are featured with low noise and high rotary precision. 13. It is developed independently by the company. 14. Optional functions: constant current and static pressure, grating and closed loop, heightening the machine tool and ram and function of cutting thread etc.
CK5228E Double Column CNC Vertical Lathes 1. Such series of products adopt modularization design and the function can be selected arbitrarily. The product design is mature and reliable, thus, large amount of users have selected them. 2. With 100% full manual operation function, the common operator of vertical lathe can operate it as well without worrying about failure to manipulate machine tool due to the incapacity of programming. In addition, it is convenient and practical. 3. The working platform adopts four-step machinery + big power DC motor stepless speed control (AC frequency conversion can be selected) to realize rotary with large torque and own the turning function with constant line rate. 4. Excellent casting (HT300) is handled by heat aging. 5. The beam guide is handled by supersonic frequency induction hardening and it adopts rolling-sliding compound type. The vertical tool holder utilizes square type ram (QT600-3), which can realize heavy cutting. The sliding surface uses sticking plastic treatment with durable performance. 6. The beam guide, ram guide and vertical column guide adopt automatic lubrication pump for automatic timing and quantitative lubricating. 7. The ball screw adopt such t ype of Nanjing process or Taiwan HIWIN P3 level high precision while the lead screw uses imported be aring (Germany INA) for supporting. 8. The guide can be divided into such two types as static pressure and purely static pressure. The bearing of dynamic and static pressure is 10 ton; the purely static pressure adopts constant current for oil supply with 16-20 tons of bearing. 9. Independent hydraulic station is possessed, which facilitates adjustment, repair and maintenance. 10. The precision performs JB/T9934.1-1999 precision test of CNC vertical lathe as well as JB/T9934.2-1999 technical condition of CNC vertical lathe 11. High-standard processing and assembly process ensure the perfect product quality. 12. High-precision variable speed gear (Grade 6) and high-precision spiral bevel gear (Grade 6 gear grading) are featured with low noise and high rotary precision. 13. It is developed independently by the company. 14. Optional functions: constant current and static pressure, grating and closed loop, heightening the machine tool and ram and function of cutting thread etc.
CK5231E Double Column CNC Vertical Lathe china Such series of products adopt modularization design and the function can be selected arbitrarily. The product design is mature and reliable, thus, large amount of users have selected them. 2. With 100% full manual operation function, the common operator of vertical lathe can operate it as well without worrying about failure to manipulate machine tool due to the incapacity of programming. In addition, it is convenient and practical. 3. The working platform adopts four-step machinery + big power DC motor stepless speed control (AC frequency conversion can be selected) to realize rotary with large torque and own the turning function with constant line rate. 4. Excellent casting (HT300) is handled by heat aging. 5. The beam guide is handled by supersonic frequency induction hardening and it adopts rolling-sliding compound type. The vertical tool holder utilizes square type ram (QT600-3), which can realize heavy cutting. The sliding surface uses sticking plastic treatment with durable performance. 6. The beam guide, ram guide and vertical column guide adopt automatic lubrication pump for automatic timing and quantitative lubricating. 7. The ball screw adopt such type of Nanjing process or Taiwan HIWIN P3 level high precision while the lead screw uses imported bearing (Germany INA) for supporting. 8. The guide can be divided into such two types as static pressure and purely static pressure. The bearing of dynamic and static pressure is 10 ton; the purely static pressure adopts constant current for oil supply with 16-20 tons of bearing. 9. Independent hydraulic station is possessed, which facilitates adjustment, repair and maintenance. 10. The precision performs JB/T9934.1-1999 precision test of CNC vertical lathe as well as JB/T9934.2-1999 technical condition of CNC vertical lathe 11. High-standard processing and assembly process ensure the perfect product quality. 12. High-precision variable speed gear (Grade 6) and high-precision spiral bevel gear (Grade 6 gear grading) are featured with low noise and high rotary precision. 13. It is developed independently by the company. 14. Optional functions: constant current and static pressure, grating and closed loop, heightening the machine tool and ram and function of cutting thread etc.
CK5225E Double Column CNC Vertical Lathe 1. Such series of products adopt modularization design and the function can be selected arbitrarily. The product design is mature and reliable, thus, large amount of users have selected them. 2. With 100% full manual operation function, the common operator of vertical lathe can operate it as well without worrying about failure to manipulate machine tool due to the incapacity of programming. In addition, it is convenient and practical. 3. The working platform adopts four-step machinery + big power DC motor stepless speed control (AC frequency conversion can be selected) to realize rotary with large torque and own the turning function with constant line rate. 4. Excellent casting (HT300) is handled by heat aging. 5. The beam guide is handled by supersonic frequency induction hardening and it adopts rolling-sliding compound type. The vertical tool holder utilizes square type ram (QT600-3), which can realize heavy cutting. The sliding surface uses sticking plastic treatment with durable performance. 6. The beam guide, ram g uide and vertical column guide adopt automatic lubrication pump for automatic timing and quantitative lubricating. 7. The ball screw adopt such type of Nanjing process or Taiwan HIWIN P3 level high precision while the lead screw uses imported bearing (Ger many INA) for supporting. 8. The guide can be divided into such two types as static pressure and purely static pressure. The bearing of dynamic and static pressure is 10 ton; the purely static pressure adopts constant current for oil supply with 16-20 tons of bearing. 9. Independent hydraulic station is possessed, which facilitates adjustment, repair and maintenance. 10. The precision performs JB/T9934.1-1999 precision test of CNC vertical lathe as well as JB/T9934.2-1999 technical condition of CNC vertical lathe 11. High-standard processing and assembly process ensure the perfect product quality. 12. High-precision variable speed gear (Grade 6) and high-precision spiral bevel gear (Grade 6 gear grading) are featured with low noise and high rotary precision. 13. It is developed independently by the company. 14. Optional functions: constant current and static pressure, grating and closed loop, heightening the machine tool and ram and function of cutting thread etc.
YM-CK5112Epro Semi-closed CNC Vertical Lathe 1. This machine tool is based on the original CK5116Epro increased semi-closed protection, scraps discharge, scraps discharge car, pump water workpiece cooling, oil temperature refrigeration, Germany Mecano button station etc. features, has appearance generous and high grade. 2. The working platform owns the function of waterproof and it is not necessary to worry that cutting fluid infiltrates into it. The design of square shaped working platform facilitates the collection of cutting fluid. 3. Siemens 802DSL system (user can appoint other system) is adopted; servo motor and servo driver all utilize Siemens products. 4. Beam guiding surface and T model ram guideway is conducted with supersonic frequency quenching treatment (higher than HRC50) with the characteristics of durable service; the sliding surface is sticking with the soft plastics belt, which can prolong more the overhauling period for over 10 years. 5. The independent electric cabinet is equipped with air conditioner for refrigerating, which prolongs the reliability and service life of the electric parts significantly, facilitates repair and maintenance, and is free from the influence of machine vibration. 6. P3 high-precision lead screw produced by Nanjing Process or Taiwan HIWIN (P1 is the highest and P6 is the lowest degree), and imported bearing support. 7. The beam is protected by the white steel, and all the lubrication parts are supplied with certain amount of oil by the automatic lubricating pumps regularly. 8. Four-grade machine variable speed + motor stepless variable speed, wide range of constant power and large torque. Four station electric tool post, automatic exchange tool, convenient and practical. 9. JB/T9934.1-1999 precision inspection of CNC vertical lathe is performed JB/T9934.2-1999 technical specification of CNC vertical lathe 10. Owning constant line speed turning, cutting thread and other functions 11. High-precision transmission gear (6 grades) and high-precision spiral bevel gear (6 grades) with low noise and high rotary precision. 12. All the castings are made of HT300 grey cast iron (ram is made of ductile iron) which is treated with artificial heat ageing, high-quality processing and improved assembly process. All the functional parts and electric parts are in high quality with high reliability. 13. Complete fitting configuration allows the user to put into operation only by preparing cutting tool and measuring tool. The improved after-sales service (Before-sale, after-sale, install, commissioning, training and guarantee) and 2-year quality assurance service are available. 14. Optional parts: Constant flow hydrostatic guideway, grating closed loop, heighten lathe body, lengthen ram etc.
