Not only can we provide you with plate heat exchanger , but also we can help you to choose suitable one according to the parameter offered. We engage in design, development, manufacture and consulting service. Our plate heat exchanger can be used in the field of air-conditioner, electric power, petroleum chemicals, boats and ships, food and drinks, iron and steel , recycling of the heat. We dedicate ourselves to the design, manufacture and service of the phe, providing a solution and high-quality products and service for clients according to different fields and conditions.
Brazed heat exchanger has a special heat transfer efficiency . Therefore, it can handle larger capacity with good efficiency , even though there is only a small heat exchange area. Meanwhile, it can save energy and reduce maintenance. Brazed heat exchanger is made by welding the braze and the plate in the high temperature and in a vacuum. The plate is usually made of stainless steel, aluminum or titanium. The efficiency of heat exchanging and the loading capacity for brazed heat exchanger are higher than that of the detachable phe. The design of the plate guarantees the longest working life . You can choose a standard configuration or choose different models as you like. The advantage of the brazed heat exchanger: Can save your investment and transportation expenses 1¡§|can be fixed easily with the compact structure Thin plate High heat insulation ratio 2¡§|it can need one third water as much as that of the sheel-and-tube heat exchanger. 3¡§|less scaling factors High water flowing speed reduce the scale . So less cleaning is needed. 4¡§|light weight The weight is 20%-30% as much as that of shell-and -tube heat exchanger. 5¡§|durable in use Can bear the temperature of 250¡æ and high pressure of 45 bar. No corrosion Remove the gasket 6¡§|high quality The products can be used in the field of metallurgy, food, light industry, chemical industry, refrigerator and heating and ventilation.
the cooling tube is made of cooper to roll fin outside individual box
My company is a professional supplier of high quality stainless steel heat exchanger tubes, finned tubes , u-tubes and copper alloys and titanium tubes in china, material grade include austenitic 304, 304l, 316l, 316ti, 310s, 317l, 347h, 321, 2205, 2507, s31803, s32750, s32760, t5, t11, t12, t22, a179, a209(t1), a333(gr6), a334(gr6) astm 338 grade 1 and grade 2. More information about my company please review our web: www.Fengtaiint.Com. My company has gotten iso2000 and ped97/23/ec certificates.
Tubular heat exchanger is a straight tube heat exchanger with one or more inner tubes situated in a shell. It is designed to accomplish the efficient heat transfer from one medium to another. The user can choose different materials according to their needs, such as carbon steel, stainless steel, copper pipe, aluminium tube, steel aluminum complex pipe and so on. We could manufacture standard and customized equipment to meet your needs.
A spiral heat exchanger refers to a pair of flat surfaces that are coiled to form the two channels in a counter-flow arrangement. Each of the two channels has one long curved path. The main advantage of this device is its highly efficient use of space.
We produce shell and tube heat exchangers from carbon or stainless steel. Heat exchangers are thermal machines where the heat from one media is transferred to another. In practice, they are used for cooling oil, for steam condensation in central heating systems and as boilers for hot tap water. The heat exchangers can be made from steel or stainless steel. The pipes inside the heat exchanger are according to the TIG welding procedure welded to the flange of the heat exchanger. The heat exchangers are produced in various types: U-shaped, helical, with even pipes, conducting several parallel currents through the heat exchanger.
We are quality recognized company and is active Manufacturer & Supplier of high quality Air Cooled heat exchangers in India.Our Air cooled heat exchangers offer many unique features, such as: variable-pitch fan hubs, 2-speed motors, galvanized or stainless construction, maintenance walkways, and other special features required for your application. Our Air cooled Heat Exchangers are built to Sect. VIII of the ASME Code, As per pressure vessels Norms. We follow API 661 Standards (Air-Cooled Heat Exchangers for General Refinery Service) For refinery and petrochemical services most customers include. Also, These include such items as galvanizing vs. painting, types of headers, maintenance walkways and platforms, controls, and external loads on the cooler. Also We follows Standards in Heat Exchanger Constructions. Air cooled heat exchangers are same in the functions of finned tube heat exchanger. This type of heat exchangers are specially used in large quantity cooling requirements. We are main suppliers air cooled heat exchangers for oil refineries and process fluid cooling. Export worthy wooden packing.
Plate heat exchanger is an ideal equipment for heat transmitting of liquid and air, suitable for various types of drinks and industry liquid in the produce of heating, sterilization, cooling, vapouring, condensation and heat recovery. It is widely applied in the light industry, food, medicine, textile, chemical air conditioning and heating. Model BR0.05-1.0-0.5~5-ES-IIBJ(Z) Series: Plate Dimension: 490¡Á170¡Á4.7mm Heat Exchanger are Single Piece(m2): 0.05 Angel Hole Diameter: ¦µ38mm Exchange Area per Set (m2): 0.5~5 Max. Working Pressure: 1Mpa Max. Working Temp.: 120~150(¡æ).
Plate heat exchanger
Brazed plate heat exchanger Bl14 n means number of plates Length (mm): 206 Width (mm): 76 Thickness (mm): 10+2.3n Weight (kg): 0.7+0.06n Channel volume (l): 0.010(n-2) Exchange area (m2): 0.014(n-2) Working pressure: 3.0mpa Testing pressure: 4.5mpa Working pressure: -160grc ~ 225grc Bl14a n means number of plates Length (mm): 190 Width (mm): 80 Thickness (mm): 10+2.3n Weight (kg): 0.9+0.06n Channel volume (l): 0.010(n-2) Exchange area (m2): 0.014(n-2) Working pressure: 3.0mpa Testing pressure: 4.5mpa Working pressure: -160grc ~ 225grc
Brazed plate heat exchanger Bl20 n means number of plates Length (mm): 310 Width (mm): 76 Thickness (mm): 10+2.3n Weight (kg): 1.0+0.08n Channel volume (l): 0.018(n-2) Exchange area (m2): 0.020(n-2) Working pressure: 3.0mpa Testing pressure: 4.5mpa Working pressure: -160grc ~ 225grc
Brazed plate heat exchanger Bl26 n means number of plates Length (mm): 325 Width (mm): 111 Thickness (mm): 10+2.35n Weight (kg): 1.3+0.13n Channel volume (l): 0.025(n-2) Exchange area (m2): 0.026(n-2) Working pressure: 3.0mpa Testing pressure: 4.5mpa Working pressure: -160grc ~ 225grc
Brazed plate heat exchanger Plate material: aisi316l/304c Connection material: aisi304 Brazed material: nickel/copper Max design tempt: 150grc/225grc Min design tempt: -160grc Max design pressure: 30barg/45barg Advantages of brazed phe: Compact structure and easy installation Small consumption of water Low scaling coefficient Light in weight and durability
Gasket plate heat exchanger Plate material--applicable fluids Stainless steel(sus304, sus316l)--clean water, river water, edible oil, mineral oil Ti--sea water, salty water, salinous compounds 20cr, 18ni, smo--low concentrated sulface acid, inorganic water Nickel--high temperature and high concentrated caustic soda Hastelloy--high concentrated sulfate acid, chloride acid, phosphate acid Gasket material(applicable temperature)--applicable fluids Nbr(-15grc~135grc)--water, sea water, mineral oil, salinous water Epdm(-25grc~180grc)--hot water, steam, acid, alkali F26(-55grc~230grc)--acid, alkali Ftp(0grc~160grc)--high concentrated acid, alkali, high temperature oil, steam Advantages of gasket phe: .High heating transferring coefficient .High heat recovery rate .Great flexibility .Low flow stagnation .Compact structure and easy maintenance
Brazed aluminum heat exchangers
Plate Heat Exchanger uses metal plates to transmit heat between two fluids and is available in different specifications. Also, using this modern solution has more advantages over conventional heat exchangers. At Process Engineers And Associates, you will get the unparalleled quality at industry leading prices. Being one of the industryâ??s leading Plate Heat Exchanger Manufacturers In Delhi/NCR, we offer several specifications to choose from. Major Characteristics Of Plate Heat Exchanger Are: Simple And Compact Design: This Industrial Plate Heat Exchanger has a simple fabrication and comes in small and easy-to-use designs to fit in your industry premises. These thin sheets have corrugations and patterns to increase the surface area as well as the efficiency of the products. Quick To Clean And Maintain: These Heat Exchangers are made of good quality metal, which makes it easier to clean and maintain them after completing the application. Easy To Enhance The Capacity: You can simply expand the size and capacity of the sheet by just adding one along with others. Application Areas: Steel Industry Marine Industry Pharma Industry Dairy Industry Beverage Industry
Design Features & Benefits The spiral plate heat exchanger is made by rolling two long metal plates around a center core to form two concentric spiral flow passages, one for each fluid. The plate edges are welded shut so that each fluid stays within its own passage and there is no flow bypassing or intermixing. Channel plate width and spacing (gap between plates) are optimized for the specified duty, maximum heat transfer, and ease of access. The plate gap is maintained by welded spacer studs although some designs do not require them. Due to its inherent circular design and large surface area to volume ratio, the spiral heat exchanger offers unique advantages over other types of heat exchangers like the shell and tube. High Thermal Efficiency Single and long curving flow passages with a uniform rectangular cross-section ensure superior flow distribution, intense turbulence, and high heat transfer coefficients (50-100% greater than shell & tubes). Self-Cleaning Passages The spiral's single-flow passages induce high shear rates that scrub away deposits as they form. This self-cleaning effect reduces fouling and makes spiral heat exchangers ideal for handling tough fluids such as process slurries, sludge, and media with suspended solids or fibers. Countercurrent or Co-current Spiral heat exchangers normally operate in true countercurrent flow for close approaches and temperature crosses. Occasionally a co-current flow design has major benefits, especially in cooling or heating fluids prone to gelation, burn-on, freezing or similar skin temperature related fouling. Small Footprint & Easy Access The spiral heat exchanger is compact and requires minimal space for installation and servicing. Removable covers provide easy access to interior heat transfer surfaces for field inspections, routine maintenance, or manual cleaning if required.
FITZER has designed and manufactured over 5000 units of graphite block heat exchanger which are one of the most reliable, flexible and compatible heat exchangers in the market for corrosive Process. We provide a wide range of Graphite Block Heat Exchanger in Cylindrical, Cubical and Shell and Tube Type Design with a premium graphite quality guarantees a reliable and efficient operation even in robust condition for our customer. FITZER graphite block heat exchanger is adapted to the heating, cooling, evaporation, condensation and absorption of highly corrosive liquid chemicals. Thus, these are used in various applications like absorber, coolers, condensers, heaters and evaporators. We provide customized design of graphite block heat exchanger based on deep understanding of our customers need with optimizing design. Totally customized design: number of blocks, size of blocks and number of passes can be adjusted Design pressure: -1 barg (full vacuum) to +10 barg (145 psig) Design temperature: -60 to +210�°C (-76 to 446�°F) Heat transfer area: up to 150 m2 Block diameter â?? 100 to 1000 mm diameter Different drilling diameters on process and service sides to avoid fouling process Maximum block diameter: 1000 mm Thermal expansion compensation ensured by tie rods and helical springs Graphite blocks are impregnated with different resin such as Phenolic Resin impregnated or PTFE impregnated graphite block. Blocks design and manufacture cylindrical SR series block or cubical SC series block Special features as far application such as gas liquid separator, multi entry utility flow, end chamber cooling, multi-pass arrangement depending on application PTFE Bellows â?? fitted to graphite nozzles Design: according to European PED, ASME code, Chinese Pressure Vessel code and other national pressure vessel codes on request Application: Graphite block heat exchangers are used as Condensers, Coolers, Heaters, Reboilers, Evaporators (Forced circulation, thermosiphon, falling film, etc.) in industries like Agrochemicals, Pharmaceuticals, Metal processing etc. Industrial processes Hydrochloric acid Hydrofluoric acid Phosphoric acid Sulfuric acid Bromohydrin acid EpichlorohydrinVinyl chloride monomer Fire retardants Flavors and fragrances VitaminsCrop protection Fumed silica Silicones Titanium dioxide Fine chemicals Active pharmaceutical ingredients Carbon steel and stainless-steel pickling Copper electrolysis Epichlorohydrin Vinyl chloride monomer Fire retardants Flavors and fragrances Vitamins Isocyanates Viscose Polycarbonate Coagulants Treatment, purification and concentration of spent acids Sulfuric acid dilution And many other corrosive processes
10 heat exchangers brand new for sale at 75 % discount due to cancelled project. Offered by one of the biggest Petrochemical plants in Saudi Arabia. The exchangers are located in Yanbu Industrial City , Saudi Arabia and ready to be shipped and used in a new project as an available opportunity. Save time, design and manufacturing costs.
