Used Coaster Bus 26 Seater Suppliers and Manufacturers

SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".

SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75200 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".

SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".

SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc ( +10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80 C. When the DC panel has a temperature over 100 C, the module will stop working; when the DC panel has a temperature below 90 C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".

Chilean walnuts are grown in a special environment. Due to its natural barriers, Chile is considered a very rich country in terms of plant health. The Andes in the east, the Pacific Ocean in the west, the Atacama desert in the north and Antarctica in the south. All of these barriers protect agriculture from harmful and external diseases. Quality is a priority for the Chilean Walnut Commission. In 2013, the quality standard for shelled walnuts has been initiated. All Chilean walnut producers work with these standards to provide a high quality product to their customers. We offer NEW CROP 2023 Chandler Walnuts in all sizes ranging from 26 to 36. Let me know your requirement and leave rest on us. We provide you on time on line visual processing and packaging of your walnuts so that you are over sure about the quality you are going to receive.

ButylParaben, E209, CAS no.94-26-8, food and cosmetic antioxidant/preservative, manufacturing process via chemical synthesis, 4-hydroxybenzoic acid (Paraben) and 1-butanol as raw materials. ButylParaben used as an antifungal agent in food active against molds and yeasts, and less active against bacteria. Butylparaben is in the paraben family (Ethylparaben, Methylparaben Propylparaben) of preservatives used by the food, pharmaceutical, and personal care product industries. As an experienced ButylParaben manufacturer and supplier, we has been supplying and exporting ButylParaben for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. ButylParaben powder Specification ITEM SPECIFICATIONS Preperty: White crystalline powder Content %: 99.0 Melting Point C: 67-72 Loss in dry,% 0.5 Acid degree: qualified Sulfate (counted by SO42-),% 0.024 4-Hydroxybenzoic acid and Salicylic acid Qualified AS,%: 0.0003 Heavy metal (count by Pb),%: 0.001 Remain in burning % 0.1

Sodium Dehydroacetate, E266, CAS no.4418-26-2, white powder, sodium salt of dehydroacetic acid. Manufacturing process through chemical synthesis. It has wide range for bacteriostasis and is not affected by pH values. Sodium Dehydroacetate is widely used in food products, including in preserved bean curd, mixed pickles, kraut, pickled Chinese cabbage, original fruit juice, concentrated juice, cheese, and butter. As an experienced Sodium Dehydroacetate manufacturer and supplier, we has been supplying and exporting Sodium Dehydroacetate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Sodium Dehydroacetate powder Specification ITEM STANDARD Appearance Light brown to cream white powder Potency (IU/ mg) 1000 Min Loss on drying (%) 3 Max pH (10% solution) 3.1- 3.6 Arsenic 1 mg/kg Lead 1 mg/kg Mercury 1 mg/kg Total heavy metals ( as Pb) 10 mg/kg Sodium chloride (%) 50 Min Total plate count 10 cfu/g Coliform bacteria 30 MPN/ 100g E.coli/ 5g Negative Salmonella/ 10g Negative

Calcium Acetate Monohydrate, E263, CAS no. 5743-26-0, calcium salt of acetic acid, s a white, odorless, and tasteless crystalline powder. Also known as Calcium acetate, manufacturing process via chemical synthesis, calcium carbonate and acetic acid as raw materials. Calcium Acetate Monohydrate is mainly used in the production of candy products, desserts, and baked good (bread, cakes, pastries). As an experienced Calcium Acetate Monohydrate manufacturer and supplier, we has been supplying and exporting Calcium Acetate Monohydrate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Calcium Acetate powder Specification Product Calcium Acetate CAS anhydride :62-54-4; monohydrate :5743-26-0 INS 263 EINECS 200-540-9 EEC E263 Structure Molecular formula 1.Anhydrous:Ca(C2H3O2)2 2.Hydrates:C4H6CaO4H2O 3.C4H6CaO4xH2O(x

Non dairy creamer, E472e, CAS No.7758-11-4, food emulsifier, a substitute of milk, white to cream colored powder manufactured from dried non-fat milk. The raw materials including casein, oil, sugar, sodium, High Fructose Corn Syrup (HFCS)â?¦in the manufacturing process. Oil source: coconut oil, palm kernel oil. As an experienced Non dairy creamer manufacturer and supplier, we has been supplying and exporting Non dairy creamer for almost 10 years,, we supply Non-Dairy Creamer for Milk Tea has a fat content between 30-34%; uses for Instant Cereal has a fat content between 30-32%; uses for for Infant Formula has a fat content between 30-70%; uses for for Cold Drinks has a fat content between 20-35%; uses for Coffee has a fat content between 26-30%; uses for Acidic Beverages has a fat content between 20-70%; uses for for Acidic Beverages has a fat content between 20-35%. Please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Produced according to customers demands.Including non-dairy creamer use in coffee mate, milk tea, ice cream, cereal, baking food, infant formula,acid beverage, Condiment and soup, etc.Cold Water Solution Non Dairy Creamer SpecificationApplication: iced drinksSolution temperature: 5 Dissolution time 25-30 secondsVegetable oil: sunflower seed oilSpecification: Fat content 25%-27% Protein content 1-2%Packaging: 25KG/BagShelf life: 18 monthsNo Sugar Non Dairy Creamer SpecificationFlavor: Vanilla; ChocolateApplication: drinks vegetable oil: palm oil, palm kernel oil, hydrogenated soybean oil specification: Fat content 20%-35% Protein content 0-5%Packaging: 25KG/BagShelf life: 18 months

Product descriptions from the supplier Specifications: Types of pistachios: 1. Round (fandoghi) 2. Jumbo (kallequchi) 3. Long (akbari, ahmadaghaei, badami) Each type of pistachios is classified into fifth group: A. Open inshell B. Closed shell C. Loose kernel* D. Shelling stock E. Mechanically opened: Closed shells have been split mechanically *note: Normal, green, and unripe are kinds of kernel. Sizes: The number of pistachios per ounce (28.4g) is counting unit for this product and ranges are 18 to 34. Sizes are as follows: 18 - 20,26 - 28 20 - 22,30 - 32 22 - 24,32 - 34 24 - 26 Processed pistachios: Raw pistachios can be roasted with different flavors such as salted, lemon, garlic, curry, pepper and mixed in automatic machinery and they are packed in PP bags or printed cellophane by order Pistachios are used: As snack products, in ice-cream, chocolate, confectionery and some other delicious foods. Packing: 1. PP bags:50 KG net 2. Carton (for kernel):10 KG net in calico bags before encased in cartons. 3. Printed cellophane:50g to 2 KG net according to favorable design. Any other packing by order accepted

White Oil Grades available Meeting requirements of BP, USP AND IP Standards are as below :- 1. WHITE MINERAL OIL INDUSTRIAL GRADES - TECH GRADES ( For use in Rubbers , PVC , Polymers , EPDM , Butyl Rubber ) Industrial Grades are used in polymer and plastic industries and are tailored with respect to boiling point distribution and viscosity characteristics. The characteristics of the oil impart good plasticization effect on the finished product while ensuring retention of oil within the polymer. It is non-toxic and environmentally friendly, and has good compatibility with rubber. It is particularly suitable for EPDM and butyl rubbers, Non-polar rubber such as natural rubber and thermoplastic rubber. DANA WHITE OIL TECH 8 DANA WHITE OIL TECH 10 DANA WHITE OIL TECH 15 DANA WHITE OIL TECH 20 DANA WHITE OIL TECH 30 , 32 DANA WHITE OIL TECH 40 , 46 DANA WHITE OIL TECH 60 , 68, 70( HEAVY GRADE ) DANA WHITE OIL TECH 80 ( HEAVY GRADE ) 2. WHITE MINERAL OIL - COSMETIC GRADE White Mineral Oil Cosmetic Grade is colorless, transparent oil without any additives, water or mechanical impurities.It possesses excellent anti-oxidation, chemical and light stability. This product is suitable for cosmetic applications and for machine lubrication in food and textile industry. DANA WHITE OIL COSMETIC 5 DANA WHITE OIL COSMETIC 8 DANA WHITE OIL COSMETIC 10 DANA WHITE OIL COSMETIC 15 DANA WHITE OIL COSMETIC 20 , 26 DANA WHITE OIL COSMETIC 30 , 32 DANA WHITE OIL COSMETIC 40 , 46 DANA WHITE OIL COSMETIC 60 , 68 , 70( HEAVY GRADE) DANA WHITE OIL COSMETIC 80( HEAVY GRADE)

Good news for all our valued customers! Our premium quality Indian Sugar S30 will be reaching us in just 5 days! Don't miss out on this opportunity and place your orders now for export to UAE, Oman and Middle East & African Countries. Mark your calendars for 26/1/23 and get ready for the sweetest deal.

Every house needs this sanitizing rubber mats that can trap dirt and mud from footwear before a person enters the room. Its UV-resistant rubber bristles also ensure a longer lifespan than most other mats. Hirange is your one-stop destination to buy the best sanitizing rubber mats at best price Size : 35*60cm, 40*60cm, 45*75cm, 60*80cm, 80*100cm, 90*150cm, 90*180cm About this item Sanitizing Rubber Mats : This is a mat with raised edges that are used to clean and sterilise the shoe sole. The Black Carpet Mat : This mat will be inserted into the designer mat with a mix of water and surface disinfectant. Grey Carpet Mat: It will be placed on the trays front line to clean and dry the shoe sole before travelling to any specific spot. Disinfectant : It is a surface sanitizer that should be used at a rate of 10 mL per liter of water. (This is not included.) Uses Sanitizing rubber mats can be used by varieties of industries like Apartments, Housing Societies, Condominiums, Government and private offices, Factories, Banks, Financial Firms, ATMs, Hospitals and Nursing Homes Sports Complexes, Gymnasiums, Pools, Car Dealer Showrooms, Hotels, Restaurants and Cafes, Religious Places, Bus Stands, Railway Stations, Airports, Subway Stations, Schools, Universities, Colleges, Guesthouses, Coaching Centre, Cinema halls, Movie Theaters, Auditoriums, Marriage Halls Sanitizing Rubber Mats A DISINFECTANT FLOOR MAT: A Sanitizing rubber mat is designed to keep dirt, grime, water, snow, and debris from being tracked into your home. It can be filled with disinfection liquid to keep shoes clean and sanitary before entering the premises. MADE TO LAST A LIFETIME: It is comprised of superior quality polymer bristles and ultra-absorbent fabric, and it does an excellent job of keeping feet clean. Furthermore, the surface of the Sanitizing rubber mats will not degrade with repeated additions of disinfectant for cleaning and disinfection. ANTI-SLIP BACKING: The supplied disinfecting floor mat has a safe and non-slip double-slip design that may be firmly anchored to the ground to prevent slipping stability and provide extra safety for the elderly and children. EASY TO CLEAN: Not only does this shoe sanitising floor mat maintain your interior sanitary and your flooring clean, but it is also simple to clean. Simply shake, vacuum, hose down, or toss in the washing machine, and it will be as good as new after each wash. EFFECTIVE LOW PROFILE DESIGN: The floor mat features a low profile design that lays flat on the floor and stays in place at all times. Its low clearance prevents it from catching under doors, while the looped material catches and traps infection-causing debris and mud.

Product: Rattan Mosaic Tray Shape: Rectangle or Round Installation: Standing Type Thickness: 3 cm Specification: 20-22-24-26-30-35 cm No. of Tiers Single Use: Beverage, Food, Tableware, Dish and Bowl, Drink/Food Material: Rattan Feature: Sustainable, Stocked

Place of Origin: Ninh Binh, Vietnam Plant Fiber Type: Rattan Type: Storage Trays Applicable Space: Bathroom, Living Room, Kitchen Product: Rattan Mosaic Tray Shape: Rectangle or Round Installation Type: Standing Type Thickness: 3 cm Specification: 20-22-24-26-30-35 cm Use: Beverage, Food, Tableware, Dish and Bowl, Drink/Food Material: Rattan

Place of Origin: Ninh Binh, Vietnam Plant Fiber Type: Rattan Type: Storage Trays Applicable Space: Bathroom, Living Room, Kitchen Shape: Rectangle or Round Installation Type: Standing Type Thickness: 3 cm Specification: 20-22-24-26-30-35 cm Use: Beverage, Food, Tableware, Dish and Bowl, Drink/Food Material: Rattan

Place of Origin: Ninh Binh, Vietnam Plant Fiber Type: Rattan Type: Storage Trays Applicable Space: Bathroom, Living Room, Kitchen Product: Rattan Mosaic Tray Shape: Rectangle or Round Installation Type: Standing Type Thickness: 3 cm Specification: 20-22-24-26-30-35 cm Use: Beverage, Food, Tableware, Dish and Bowl, Drink/Food Material: Rattan

INCI Name: UNDECYLENOYL GLYCINE Molecular Formula: C13H23NO3 Molecular Weight: 241.33 Appearance: White crystalline powder Purity: 98% CAS NO.: 54301-26-7 Application: cosmetics and skin care products Supplier: ZHENYIBIO Undecylenoyl glycine is an amino acid surfactant, a mild detergent and foaming agent. 1. Due to the characteristics of acidification regulation and glycine biological vehicle,it can maintain the skin's ecosystem; 2. Especially useful for anti-dandruff products 3. It has broad-spectrum antibacterial activity and can be used as a deodorant to eliminate body odor; 4. It is effective against Staphylococcus epidermidis and Propionibacterium acnes,so it is especially suitable for acne-prone skin.