The raw material of the porous titanium plate for hydrogen production by PEM water electrolysis is pure titanium powder, which is formed by pressing the mold and sintered at high temperature in vacuum. Hydrogen production by water electrolysis is a new energy pillar sunrise industry. The micropore diameter of the porous titanium plate is used to fully react with the medium to produce hydrogen energy. The surface is coated to prevent oxidation and increase the efficiency of hydrogen production. Porous titanium plates are widely used in hydrogen energy, petrochemical, and pharmaceutical filtration, with obvious advantages, and are indispensable products. Product Parameters Filtration accuracy: 0.5um-50um Porosity: 30-40% Permeability: 3-800m3/m2hkPa Compressive strength: 2-3Mpa Temperature resistance: 300 Maximum working pressure difference: 0.6Mpa Features 1. Strong temperature resistance, typical application at temperatures below 300 C;High filtration precision, stable pores, can effectively remove suspended solids and particles, etc., and the purification effect is good; 2. Good air permeability and low pressure loss. High porosity, uniform pore size, low initial resistance; 3. Easy to blow back, can be regenerated online, easy to clean, strong regeneration ability, long service life; 4. High mechanical strength, good rigidity, good plasticity, no need for additional skeleton support protection, easy to install and use; 5. Easy maintenance, good assembly, can be welded, bonded and machined; 6. Uniform pores, especially suitable for occasions requiring high uniformity such as fluid distribution and homogenization treatment; 7. Good corrosion resistance, can be used in nitric acid, sulfuric acid, acetic acid, oxalic acid, phosphoric acid, 5% hydrochloric acid, molten sodium. Stable use in liquid hydrogen, liquid nitrogen, hydrogen sulfide, acetylene, water vapor, hydrogen, carbon dioxide gas and other environments. Applications The porous titanium plate is used as the GDL (gas diffusion layer) of the anode for hydrogen production by water electrolysis in PEM water electrolysis. The pores are uniform and the porosity can be controlled at 30%-40%. Good electrical conductivity and strong corrosion resistance. It can be coated with platinum group metals to enhance its catalytic performance. The cost is relatively high, but the hydrogen production efficiency is high and the purity is high, which is suitable for industrial hydrogen production. Every kind of filter material will be blocked, so it is very important to choose the pore size. If you choose the right pore size, you will have a good filtration efficiency, and the blocking situation will be alleviated. If the blockage is serious, regular replacement can solve this problem.
Titanium sheet is produced on the basis of titanium plate with further cold rolling; the production process of titanium sheet is more complicated. The deformation control is more strictly in the process of rolling. Our company provides titanium coil and titanium sheet. We have plenty of titanium sheets in stock. That can be cut in different sizes according to the customers needs, greatly shorten the time of delivery. We mainly provide pure titanium sheet of Gr1, Gr2, Gr4 grades; For titanium alloy sheet, We mainly provide Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23 and other grades.
Titanium sheet is produced on the basis of titanium plate with further cold rolling; the production process of titanium sheet is more complicated. The deformation control is more strictly in the process of rolling. Our company provides titanium coil and titanium sheet. We have plenty of titanium sheets in stock. That can be cut in different sizes according to the customers needs, greatly shorten the time of delivery. We mainly provide pure titanium sheet of Gr1, Gr2, Gr4 grades; For titanium alloy sheet, We mainly provide Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23 and other grades.
Product Introduction titanium plates are widely used in heat exchangers due to their excellent thermal conductivity, corrosion resistance, and high-temperature stability. A heat exchanger is a device that transfers heat between two fluids or materials, typically one fluid is heated while the other is cooled. titanium plates can be used as the heat transfer medium in a heat exchanger, where they efficiently transfer heat while resisting corrosion and maintaining their structural integrity. Product parameters Material: Gr1 Applicable temperature: 300 Use environment: strong acid and alkali seawater regia, etc. Features 1. Excellent corrosion resistance. Due to the extremely strong corrosion resistance of titanium, titanium plates have excellent corrosion resistance under high temperature, high pressure and strong corrosive media, which can effectively protect equipment from media erosion. 2. Good physical properties. titanium plate has high strength and hardness, and has certain toughness and wear resistance, which can well withstand the working conditions of high temperature, high pressure and strong corrosion environment. 3. Excellent processing performance. Because sinteed titanium plate has good toughness and forgeability, it is easy to form and process, and can be specially processed according to specific needs. 4. Excellent thermal conductivity. Due to the high thermal conductivity of the titanium plate, heat can be quickly transferred out in a high temperature environment, thereby ensuring the efficient operation of the equipment.
Sintered titanium plates are widely used in heat exchangers due to their excellent thermal conductivity, corrosion resistance, and high-temperature stability. A heat exchanger is a device that transfers heat between two fluids or materials, typically one fluid is heated while the other is cooled. Sintered titanium plates can be used as the heat transfer medium in a heat exchanger, where they efficiently transfer heat while resisting corrosion and maintaining their structural integrity. Product parameters Material: Gr1 Applicable temperature: 300 Use environment: strong acid and alkali seawater regia, etc. Features 1. Excellent corrosion resistance. Due to the extremely strong corrosion resistance of titanium, sintered titanium plates have excellent corrosion resistance under high temperature, high pressure and strong corrosive media, which can effectively protect equipment from media erosion. 2. Good physical properties. Sintered titanium plate has high strength and hardness, and has certain toughness and wear resistance, which can well withstand the working conditions of high temperature, high pressure and strong corrosion environment. 3. Excellent processing performance. Because sintered titanium plate has good toughness and forgeability, it is easy to form and process, and can be specially processed according to specific needs. 4. Excellent thermal conductivity. Due to the high thermal conductivity of the sintered titanium plate, heat can be quickly transferred out in a high temperature environment, thereby ensuring the efficient operation of the equipment. Application of Sintered Titanium Plate in Heat Exchanger Chemical processing: Sintered titanium plates are commonly used in heat exchangers for chemical processing applications, such as in the production of acids, bases, and salts. Power generation: Sintered titanium plates are used in heat exchangers for power generation applications, such as in , where they transfer heat from the reactor core to the secondary coolant. Food processing: Sintered titanium plates are used in heat exchangers for food processing applications, such as in the pasteurization of milk and other dairy products. Industrial processes: Sintered titanium plates are used in heat exchangers for various industrial processes, such as in the cooling of gases and liquids in petrochemical plants, oil refineries, and other manufacturing facilities.
Sheet :Thickness:0.6-10mm Max Length:1000mm Max width:340mm Pipe : OD10-150MM* wall thickness 2-5MM Materials : titanium GR1 GR2 Feature: 1.Working Temperature:-200-1000°C 2.Corrosion Resistance 3.High Filtering Efficiency 4.Metallic capacities, such as noise reduction,hot resistance,heat conduction,high strength and etc 5.Easy to welding and long working life Filter Shape: Could be cartridge filters,disc filters ,cup filters,cap filters,filter palte and etc Application: separation and purification of solid-liquid, gas-liquid and gas-solid in the petrifaction, hydraulic manufacturing and medical apparatus and instruments of basic industries. Technique parameters titanium powder sintering filter element technique parameters using temperatur:â?¤300°C filtering level filtration precision um maximum diameter um permeability coefficient 10-12m2 permeability m3/h.m2.kpa thickness mm compression strength Mpa/cm3 T9 0.2 2.5 1.5 0.6-10 3 T8 0.5 4 3 0.6-10 3 T7 1 6 5 0.6-10 3 T6 2 10 15 0.6-10 3 T5 5 15 0.04 40 0.6-10 2.5 T4 10 30 0.15 120 0.6-10 2.5 T3 20 60 1.01 250 0.6-10 2.5 T2 30 100 2.01 500 0.6-20 2.5 T1 50 160 3.02 800 0.6-20 2.5 The product performance can achieve and even exceed GB. The internal pressure of powder rolled and roll tube welding is more than 0.3Mpa
Mainly used in separation and filtration petrochemicals, liquid drug manufacturing, medical equipment, and other fields. Material: titanium Specifications:max.Width 340mm, max.Length 1000mm, max.Thickness 3.0mm Precision:0.2 to 65um
Titanium Plate Specification 1. Material: Gr. 1, Gr. 2, Gr. 3, GR4, GR5, Gr. 7, Gr. 9, Gr. 11, Gr. 12etc 2. Size: Thickness 0.5-60mm, Width
CDM Titanium is an approved ISO9001:2015 & PED 14/68 EU by TUV and a professional manufacturer and exporter of titanium material and product. We manufacture titanium sheet and titanium plate Grade:GR1, GR2, GR4, GR5, GR7,GR9,GR12,GR16,GR17 Ti-8-1-1 etc Size (mm): (0.5 to 150mm) thk Ã??Max 2500 widthÃ?? Max 12000 length Standard width and Length (mm): 1000 widthÃ?? 2000 Length Standard: ASTM B265, AMS 4911, AMS 4916. Titanium cold coil / titanium strip: GR1 GR2, Size(mm):0.5mm-3mmThk max1250Width Coil with ASTM B265.
Description: Titanium plate, Titanium sheet, Titanium coil Material: Gr1, Gr2, Gr3,Gr4,Gr5, Gr7, Gr6,Gr9, Gr11, Gr12 ,Gr16, Gr17,Gr25 TA0,TA1,TA2,TA5,TA6,TA7,TA9,TA10,TB2,TC1,TC2,TC3,TC4 Standard: ASTM B265 JIS H4600 GB/T 3620.1 Size : Cold rolled: Thick 0.02mm ~ 5mm * Wide 1500mm max * Long 2500mm max Hot rolled: Thick 5mm ~ 80mm * Wide 3000mm max * Long 6000mm max
Titanium tube plate is mainly used in chemical industry.
Name Titanium Sheet / Titanium Plate Standard ASTM, AMS, ISO, GB/T Grade Commercially Pure and Alloys Dimension Cold Rolled: THK 0.5~5.0 Hot Rolled: THK 5.0~60 Condition Annealed Surface Polished or Pickled Application Chemical Industry, Petroleum Industry, Nuclear Power Industry, Marine Industry, Electrolytic Industry etc. Certificate ISO 9001:2008, MTC or The Third Party
Titanium felt, a diffusion layer material, provides electrons between the catalyst layer and the bipolar plate or the current distributor on the anode side. Due to its three-dimensional network porous structure, high porosity, high corrosion resistance and other characteristics, titanium felt has become one of the best materials of diffusion layer in fuel cell and hydrogen production by water electrolysis. Parameters: Material: Titanium Size:1500*1200mm Thickness:0.2mm, 0.25mm, 0.40mm, 0.60mm, 0.80mm, 1.00mm, 2.0mm. Porosity:60% - 75% â?» Porosity and Size can be customized. Technological Process Pure titanium (special process)-titanium fiber (laying, sintering)-titanium fiber felt (with three-dimensional network porous structure)- Titanium felt for LGDL Features: 1. Three-dimensional grid porous structureï¼? 2. Strong corrosion resistanceï¼? 3. Optimal electrolysis performanceï¼? 4. High porosity and current densityï¼? 5. Uniform pore size distribution. Applicantion 1. Liquid/gas diffusion layer; 2. Hydrogen absorber; 3. Hydrogen-rich water dispenser; 4. Diffusion layer of hydrogen cell stack; 5. PEM hydrogen production by water electrolysis.
Thickness: 40mm Width: 300mm Length: 1000mm Technique: cold rolled Application: industrial Surface:, pickling, mirror Certificate: iso 9001:2008
Product name: Titanium sheet Material grade: Gr1, Gr2, Gr4, Gr5,Gr7, Gr9, Gr23, TI-6Al4v, Certificate: ISO9001:2008,TUV, material test certificate EN10204.3.1 Standard: ASTM B265,ASME SB265,AMS4911,ASTM F136,ASTM F67 Tehnique: Hot/cold rolled Surface: Acid wash,polished Thickness:0.3-100mm Width:20-1220mm Length:500-6000mm
The square porous titanium plate is manufactured using advanced sintering technology, which results in a highly porous structure with interconnected channels and a large surface area. The porous structure of titanium plates allows for effective gas permeation and rapid exchange of gases. The interconnected network of pores provides a large surface area for gas interactions, promoting efficient gas diffusion and ensuring uniform distribution across the entire plate. This characteristic is particularly beneficial in applications where optimized gas diffusion is critical, such as fuel cells, electrolyzers, and gas purification systems. The compatibility of porous titanium plates with various gases further expands their utility. They find extensive use in industries such as fuel cells, electrolyzers, metal-air batteries, and gas purification systems, where efficient gas diffusion is crucial for optimal performance. Specifications: - Porosity: 30% to 40% - Pore Size: 5 microns - Dimensions: 50 mm x 50 x 1mm - Surface Coatings: Optional coatings such as platinum can be applied to enhance catalytic properties. Features: 1. High Gas Diffusion Efficiency: The porous structure ensures excellent gas diffusion and enables rapid exchange of gases. 2. Corrosion Resistance: Titanium is known for its excellent corrosion resistance. The porous titanium plate can withstand exposure to corrosive environments, making it suitable for applications where contact with aggressive substances is expected. 3. Mechanical Strength: The sintering process used to manufacture the porous titanium plate results in a structurally robust material. It possesses good mechanical strength, ensuring durability and reliability even under challenging operating conditions. 4. Customizability: The parameters of the porous titanium plate, such as pore size distribution and porosity, can be tailored to specific application requirements. This allows for the optimization of gas diffusion characteristics, ensuring optimal performance in various industries. 5. Compatibility: The porous titanium plate is compatible with a wide range of gases, making it suitable for diverse applications. It finds use in industries such as fuel cells, electrolyzers, metal-air batteries, and chemical processing, where efficient gas diffusion is essential. Applications: - Fuel Cells: The porous titanium plate serves as a gas diffusion layer in proton exchange membrane fuel cells (PEMFCs) and solid oxide fuel cells (SOFCs). - Electrolyzers: It is used in water electrolysis systems for efficient gas diffusion during hydrogen production. - Metal-Air Batteries: The plate enhances oxygen diffusion in metal-air battery systems, improving their performance. - Environmental Protection: The plate finds applications in air filters, gas purifiers, and exhaust gas treatment systems. - Chemical Processing: It is utilized in gas-liquid contactors, catalytic reactors, and gas sensors.
Crafted from high-quality titanium, the 20um Porous Titanium Plate for Electrolytic Cells exhibits excellent corrosion resistance, ensuring a long lifespan even in harsh and corrosive environments. Its outstanding mechanical strength and stability enable it to withstand high temperatures and pressures, making it suitable for a wide range of operating conditions. The 20um pore size of our titanium plate ensures optimal gas and liquid flow, maximizing the efficiency of your electrolytic process. It provides a large surface area for effective electrochemical reactions, resulting in improved product yields and reduced energy consumption. Whether you're involved in water electrolysis, electroplating, or any other electrolytic process, our porous titanium plate is the ideal choice for achieving superior results. Our 20um Porous Titanium Plate for Electrolytic Cells is meticulously engineered to deliver consistent and uniform porosity throughout its surface. This uniformity guarantees reliable and predictable performance, allowing for precise control over your electrolytic processes. Additionally, its thin and lightweight design provides ease of handling and installation, minimizing downtime and optimizing productivity. Parameter Material: titanium powder Length: 250mm Width: 95mm Pore size: 20um Hole diameter: 7mm Coating: Can be coated with platinum, ruthenium-iridium, iridium-tantalum coating upon request Features Enhanced Efficiency: The 20�¼m pore size enables efficient gas and liquid flow, improving mass transfer rates and reducing energy consumption. Superior Corrosion Resistance: Crafted from high-quality titanium, the plate offers exceptional resistance to corrosion, ensuring durability in challenging environments. Optimal Mechanical Strength: Maintains excellent mechanical strength, withstanding high temperatures and pressures for reliable performance. Uniform Porosity: Provides consistent electrochemical performance and precise control over electrolytic processes. Versatility: Suitable for various electrolytic applications, catering to different industries' needs. Lightweight and Easy Handling: The thin and lightweight design allows for easy installation and reduces downtime during maintenance.
The 10m Porous Titanium Plate with Chamfers for PEMFC is a high-performance filter designed specifically for Proton Exchange Membrane Fuel Cells (PEMFC). With its dimensions of 50*50mm and exceptional precision, this product fulfills the stringent filtration requirements of PEMFC systems. Featuring a precise 10�¼m pore size, the porous titanium plate effectively removes fine particulate matter, ensuring the stable operation of the fuel cell system. Made from high-quality materials and manufactured with precision, this filter guarantees excellent filtration performance and a long lifespan. In terms of design, the 10�¼m Porous Titanium Plate with Chamfers offers two options for chamfered edges: semi-circular and straight-edged. These design choices not only facilitate convenient installation and removal but also prioritize the safety of operators and equipment by eliminating sharp edges. Whether employed in research laboratories or industrial applications, this filter serves as an ideal choice for PEMFC filtration. By efficiently filtering out fine particulate matter, it creates a clean working environment for fuel cells. Parameter Material: titanium powder Thickness: 0.5mm Size: 50*50mm Pore size: 10um Chamfers: customized by requirements Features High precision: The product has excellent 10um precision and can effectively filter out the tiny particulate matter required by PEMFC. Long-lasting and durable: Using high-quality materials and precision manufacturing processes to ensure excellent performance and long life of the product. Safety design: The chamfer design provides two options, semi-circular and straight edge types, which facilitates installation and disassembly and prevents sharp edges from causing harm to operators or equipment. Wide application: Whether in research laboratories or industrial applications, this product is ideal for PEMFC filtration. Clean environment: It can efficiently filter tiny particulate matter and provide a clean working environment for fuel cells. Chamfering process For semi-circular chamfers, we use suitable tools, such as filleting tools or sheet metal processing machines, to weaken, cut and trim the edges to give them a smooth, rounded shape. For straight-edge chamfers, we use cutting or cutting tools in the process to precisely cut and trim the edges to form a straight-line chamfer. We attach great importance to safety and precision when performing chamfering operations. We ensure the chamfering process is completed using the proper tools and equipment, as well as experienced operators, to ensure a smooth and consistent edge. The design and processing of chamfers help facilitate installation and removal while eliminating the dangers that may arise from sharp edges. Such a design not only improves the convenience and safety of operations but also ensures product quality and reliability.
Product Introduction As a new type of green energy, hydrogen energy is a new type of green energy, and its sustainable manufacturing has become the goal of the industry. Water electrolysis hydrogen production, hydrogen generators, etc., hydrogen energy equipment emerge in endlessly, and relatively safe and efficient hydrogen production consumables have become a relative key. Porous titanium plate, made of pure titanium, Gr1 grade, non-toxic, safe, naturally bonded after high temperature sintering, relatively uniform pore size, no impurities, good air permeability, high-efficiency reaction, high hydrogen production efficiency, and become an efficient auxiliary part of hydrogen energy equipment. Product parameters Brand: TOPTITECH Material: Gr1 Shape: Rectangular Applicable object: electrolyzer Thickness: 0.8-2.0mm Specifications: can be customized Mesh: 1000 mesh/inch Filtration accuracy: 20 microns Type: Efficient Performance: acid resistance; alkali resistance; high temperature resistance Uses: water, gas, liquid Features 1. Precise air permeability, uniform air holes, certain mechanical strength, high adaptability for external processing; 2. High-purity raw materials, resistant to various acid and alkali environments, a corrosion-resistant material; 3. The porosity can reach 35%, which is a relatively high-strength product in a breathable material and can bear pressure; 4. It can withstand a certain temperature, for example, it can be used normally in a long-term heating environment within 300 degrees. Process The pure titanium powder is pressed into a plate shape, and then sintered in a high-temperature vacuum sintering furnace. The particles are naturally bonded to form a plate shape, and then cooled to form a plate base material, which can then be cut into the desired shape. The pore morphology was observed by means of metallographic microscopy, the pore size distribution was determined by mathematical statistics, and the compression properties were measured by compression tests.
The raw material of the porous titanium plate for hydrogen production by PEM water electrolysis is pure titanium powder, formed by pressing the mold and sintered at high temperature in a vacuum. Product Parameters Filtration accuracy: 0.5um-50um Porosity: 30-40% Permeability: 3-800m3/m2hkPa Compressive strength: 2-3Mpa Temperature resistance: 300â?? Maximum working pressure difference: 0.6Mpa Features 1. Strong temperature resistance, typical application at temperatures below 300 C;High filtration precision, stable pores, can effectively remove suspended solids and particles, etc., and the purification effect is good; 2. Good air permeability and low pressure loss. High porosity, uniform pore size, low initial resistance; 3. Easy to blow back, can be regenerated online, easy to clean, strong regeneration ability, long service life; 4. High mechanical strength, good rigidity, good plasticity, no need for additional skeleton support protection, easy to install and use; 5. Easy maintenance, good assembly, can be welded, bonded and machined; 6. Uniform pores, especially suitable for occasions requiring high uniformity such as fluid distribution and homogenization treatment; 7. Good corrosion resistance, can be used in nitric acid, sulfuric acid, acetic acid, oxalic acid, phosphoric acid, 5% hydrochloric acid, molten sodium. Stable use in liquid hydrogen, liquid nitrogen, hydrogen sulfide, acetylene, water vapor, hydrogen, carbon dioxide gas and other environments.
