Lipoic Acid(Cas:62 46 4) Suppliers and Manufacturers

APPLICATION OF SK-HB K-SILICATE MORTAR : * K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors. It is also used for jointing chemical resisting stoneware pipes. K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles. The concrete surface needed protection should be dryed, clean and rough. The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner. When Bedding and Jointing Materials are the same. On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints. The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water. Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic. When Bedding and Jointing Materials are Different. Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions. PREPARATIONS OF MORTAR : * Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan. * Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar. * In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared. * The cement mortar will be used before it starts setting.

Caustic Soda Flakes Caustic Soda Pearls / Bead / Prill / Granule Caustic Soda solid Molecular formula: NaOH Molecule Weight: 40 H.S code: 28151100 CAS: 1310-73-2 UN number 1823 Dangerous Class 8 We use rich natural gas resources and its strategic of liquid alkali procurement, storage, transport conditions, gradually formed transportation and sale of liquid alkali, production and sales base Specifications(Caustic Soda Pearls 99%min): 1. Item: STANDARD 2. NaOH: 99% 3. Na2CO3:0.5%max 4. NaCL:0.03%max 5. Fe2O3: 0.005%max Packing in 25KG net PP bag lined with double PE inner bags. Specifications(Caustic Soda Flakes 99%min) 1. Item: Standard 2. NaOH: 99%min 3. Na2CO3: 0.5%max 4. NaCL:0.05%max 5. Fe2O3:0.005%max Packing in 25KG net PP bag lined with double PE inner bags. Specifications(Caustic Soda Solid 99%min) 1. Item: Standard 2. NaOH: 99%min 3. Na2CO3: 0.9%max 4. NaCL:0.15%max 5. Fe2O3: 0.01%max Packing in 200KG net sheet metal drugs.

Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor

We offer Ammonium Nitrate in Granular and Crystalline forms. Ammonium Sulphate Physical State ; Powder Color : White crystalline powder Cas No. 7783-20-2 Arsenic (As) ; NMT 0.00002% Calcium (Ca) : NMT 0.001% Magnesium (Mg) : NMT 0.0005% Non-volatile substances : NMT 0.01% Active Ingredient ; (NH4)2SO4% Assay : Min 99.5% PH Value ; Min. 4.5 Chloride : NMT 0.0003% Nitrates : PNMT 0.001% Iron ; NMT 0.0002% Heavy Metals (as Pb) ; NMT 0.0002% Phosphate (PO4) ; NMT 0.0005% The primary use of Ammonium Sulphate is as a fertilizer for alkaline soils. In the soil the ammonium ion is released and forms a small amount of acid, lowering the pH balance of the soil, while contributing essential nitrogen for plant growth. The main disadvantage to the use of Ammonium Sulphate is its low nitrogen content relative to Ammonium Nitrate, which elevates transportation costs. It is also used as an agricultural spray adjuvant for water soluble insecticides, herbicides, and fungicides.

Categories Sweeteners Qty in 20â??FCL 20000kg Min Order 500kg Origin China Packaging Factory Packaging or Neutral Certificate ISO, Kosher, Halal, BRC E Number E950 CAS No. 55589-62-3 HS Code 293499 Specification FCC/USP Acesulfame Potassium, E950, Cas no.55589-62-3, also called Acesulfame K or Acek, calorie-free artificial sweetener manufacturing process via chemical synthesis, Diketene and sulfamic acid as the main raw materials. 3% Acesulfame K solution is 200 times sweeter than sucrose, as sweet as aspartame, about 2/3 as sweet as Sodium Saccharin, and 1/3 as sweet as Sucralose. It is freely soluble in water and slightly soluble in ethanol. It is used as a sweetener in food and beverage products. As an experienced Acesulfame Potassium manufacturer and supplier, we has been supplying and exporting Acesulfame Potassium for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day.

Description of Formic Acid Popular Name: Methanoic acid or Formic acid Formula: HCOOH CAS NO.: 64-18-6 Dangerous Goods Class: 8 Classification: Carboxylic acid Molecular Structure: HCOOH Appearance: clear & transparent liquid Packange of Formic Acid 25kg/35kg/250kg/1200kgs IBC drums, ISO tank Usage Formic Acid 85% widely used in pharmaceutical industry, leather industry, printing and dyeing industry, chemical industry, rubber industry, steel industry, paper industry, pesticide industry, food industry, poultry industry etc.

Phosphoric Acid Molecular Formula : H 3 PO 4 Molecular Weight : 97.99 Specification : Industry Grade GB2091 1992 or according to customer's demand Food Grade GB3149 2004 FCC or according to customer's demand Usage : Used as cleaner for printed circuit , acidic flavoring for food, nutriment for yeast, also for use of producing different phosphates. Package: 20L, 200L plastic drums, iron + plastic drums, tanks or according to customer's demand.

Coconut Copra Type : Dry White Edible Coconut Copra Style : Sun Drying Color : White Brown Grade Edible USD 1.950/MT Moisture : 6% Max Size : 9-14 cm Oil Content : Max 67% FFA as Lauric : 0,3% Smoky : Max 1% Rubbery : Max 5% Other : Free Insects/Fungus/Mouldy Packing : 50kg PP Bag Loadability : 20" FCL 10-11 MT 40" FCL 24-25 MT Grade Reguler USD 1.450/MT Moisture : 6% Max Size : 4-9 cm Oil Content : 61-63% FFA as Lauric :

Sorbitol, E420, Cas no.50-70-4, sugar alcohol, an isomer of mannitol, manufacturing process from corn. Characteristic: Sorbitol is 60% sweet taste and 1/3 less calorie than sucrose; good moisturizer, stabilizer and anti-crystallization agent; used in many kinds of food, including sugar-free confectionery, gums, frozen dessert, bakery food and etc. As an experienced Sorbitol manufacturer and supplier, we has been supplying and exporting Sorbitol for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Sorbitol food grade specification ITEM STANDARD APPEARANCE WHITE CRYSTALLINE GRANULE OR POWDER ASSAY 99.0% MN SORBITOL 98.0% MIN REDUCING SUGARS 0.15% MAX TOTAL SUGARS 0.5% MAX PH(50% AQ SOL) 5.0-7.0 RESIDUE ON IGNITION 0.1% MAX HEAVY METALS 5PPM MAX NICKEL 1PPM MAX LEAD 1PPM MAX ARSENIC 1PPM MAX CHLORIDE 50PPM MAX SULPHATE 50PPM MAX TOTAL BACTERIUM 100P/G MAX COLON BACILLUS ABSENT IN 1G

Tricalcium Phosphate, E341, CAS no.7758-87-4, white powder, also known as TCP, a calcium salt of Phosphoric acid manufactured through chemical synthesis. Tricalcium Phosphate used as an anti-caking agent, nutritional supplement (calcium intensifier), pH regulator and buffer. Tricalcium Phosphate is often used in flour, additives in milk powder, candy, pudding, beverages, cheese, jam,condiments, and meat products. As an experienced Tricalcium Phosphate manufacturer and supplier, we has been supplying and exporting Tricalcium Phosphate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Tricalcium Phosphate Specification ITEM STANDARD APPEARANCE WHITE POWDER CONTENT(CaH2PO4), % 34.0-40.0 HEAVY METALS(As Pb), % 0.003 FLUORID, % 0.005 LOSS ON DRYING, % 10.0 MAX As, % 0.0003 Pb, % 0.0002 TOTAL BACTERIAL COUNT CFU/G 500 MOLD CFU/G 50 E COLI PASS SALMONELLA PASS

L-Aspartic Acid, CAS No.56-84-8, is the L-isomer of Aspartic Acid, available as White crystalline powder. L-Aspartic Acid is an essential amino acid for building proteins. So itâ??s widely used as nutrition supplements. L-Aspartic acid is also an important material in manufacturing of aspartame. As L-Aspartic Acid Manufacturers, Suppliers and Wholesalers in China , we supply food and feed grade L-Aspartic Acid, also D-Aspartic Acid and DL Aspartic Acid. As an experienced L-Aspartic Acid manufacturer and supplier, we has been supplying and exporting L-Aspartic Acid for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. L-Aspartic Acid Food grade Specification DESCRIPTION White, oderless crystals or crystalline powder having a slightly acid taste. It is slightly soluble in water but insoluble in alcohol and in ether.It melts at about 270. Chemical Name L-Aminosuccinic Acid Molecular Formula C4H7NO4 Structural Formula Molecular Weight 133.10 SPECIFICATION (FCCVII) Identification Corresponds Assay(as C4H7NO4)è?½ 98.5% â?? 101.5%(Calculated on the dried basis) Heavy Metals(as Pb) 10mg/kg Max Lead 5mg/kg Max Loss On Drying 0.25% Max Residue on Ignition 0.1% Max Specific Rotation +24.5 ~+26.0(after drying) Arsenic(as As) 2mg/kg Max MAIN FUNCTION AND PURPOSE L-Aspartic acid can be added into cool drinks as nutrition supplement. It is used in medicine as ammoniac detoxicating agent, hepar function accelerator or fatigue refresher. And it can also be used in biochemical reagent, medium and intermediate in organic synthesis. PACKING 25KG net in Plastic Woven Bag lined with PE bag, 18MT/20FCL(on pallet) or 20MT/20FCL(without pallet). STORAGE Kept airtightly in a light-proof, dry and cool place.

Dl Aspartic Acid, CAS No.617-45-8, is a mixture of L Aspartic Acid and D Aspartic Acid manufactured through fermentation, available as white powder. Dl Aspartic Acid is an amino acid widely used in nutritional supplements, nutrition enhancers, dietary supplements, health food additives, pharmaceutical raw materials, sports supplements, sports nutritional supplements, and bodybuilding supplements. As an experienced Dl Aspartic Acid manufacturer and supplier, we has been supplying and exporting Dl Aspartic Acid for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Product Description Categories Amino Acids Qty in 20â??FCL 10000kg Min Order 500kg Origin China Packaging Factory Packaging or Neutral Certificate ISO, Kosher, Halal, BRC CAS No. 1783-96-6 HS Code 292249 Specification Feed/Food Grade

D-Aspartic Acid, CAS No.1783-96-6, an isomer of L-Aspartic Acid manufactured through fermentation, available as White Crystals or crystalline powder. D-Aspartic Acid is an amino acid widely used in nutritional supplements, nutrition enhancers, dietary supplements, health food additives, pharmaceutical raw materials, sports supplements, sports nutritional supplements, and bodybuilding supplements. As an experienced D-Aspartic Acid manufacturer and supplier, we has been supplying and exporting D-Aspartic Acid for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Product Description Categories Amino Acids Qty in 20â??FCL 10000kg Min Order 500kg Origin China Packaging Factory Packaging or Neutral Certificate ISO, Kosher, Halal, BRC CAS No. 1783-96-6 HS Code 292249 Specification Feed/Food Grade

Color : Natural white - Moisture : 3% max - FFA (Free fatty acid as lauric) : 0.5% max - Fat content: 62% min - Size: 1-3mm - Natural white color of coconut. - Free from Salmonella and Ecoli.

Protein - 62% Min Fat - 12% Max Moisture - 10% Max Sand & Silica - 2% Max Ash - 23% Max Acid value - 25-30% Max Histamine - 500 ppm. Max