Close die forging press 630t-50000t Oil hydraulic Working pressure 25MPa, 31.5MPa, 63MPa, 100MPa Prestressing frame Rexroth pump Special designed cartridge valves Siemens PLC
Open die forging press 800t-15000t Oil hydraulic Working pressure 25MPa, 31.5MPa, 63MPa, 100MPa 2-column / 4-column Prestressing frame Welding beam / casting beam Moveable working table Rotary forging table Rexroth pump Special designed cartridge valves Siemens PLC
Since PTFE will not flow above its melting point, it cannot be injection molded and requires special processing techniques. Molded PTFE is processed by first compression molding the powder into preforms, and then sintering the preforms in a process analogous to sintered metal processing. This process creates geometric shapes that can then be machined, fused, and/or welded.
Since PTFE will not flow above its melting point, it cannot be injection molded and requires special processing techniques. Molded PTFE is processed by first compression molding the powder into preforms, and then sintering the preforms in a process analogous to sintered metal processing. This process creates geometric shapes that can then be machined, fused, and/or welded.
Three beam four column hydraulic press YB32 series 315 500 630 1000 tons is applicable to the plasticity material pressing process, such as impactive loading, bending, flanging and metal drawing as well as correcting press-fitting, grinding wheel forming, cold extrusion metal parts forming and pressing process of plastic products and powder products, which can be used for punching and blanking process when matching on blanking device. This machine has the independent power mechanism and electrical system which uses the button common control to realize the adjustment, manual and semi-auto operation. Operators can carry on the adjustment the working pressure, pressing speed and the stroke of this machine according to the process. This machine can complete constant pressure and constant distance process, which can make pressure-keeping and delay to automatic return action after pressing in constant pressure process. Optional accessories: photo-electric protection device, stroke, pressure, time digital display system, hydraulic system heating, cooling device. PLC programmable controller, blanking buffer device, mould heating and temperature control device, die change with floating guide and rolling bracket, etc.
Nominal capacity 24Mpa 16000 KN 30Mpa 20000 KN Plunger diameter of main cylinder 920mm Return capacity 2000kN Daylight 3100 mm Max. slider working stroke 1400 mm Center distance between columns 2400x1500 mm Size of movable working table 4000x1500mm Capacity of movable working table 630kN Load of movable working table 40 ton Stroke of movable working table 2000 mm Slider speed speed at approach 250 mm/s (adjustable) working speed 68 mm/s return speed 250 mm/s (adjustable) Moving speed of working table 200 mm/s (adjustable) Power of main motor 1320kW (12x110 kW) Height above the floor 8500mm
The whole machine is in sheet plate welded structure, with enough strength and rigidity. The structure of 4 vertical shaft and 4 oil cylinders is adopted, to alleviate the stress of synchronous tension bar for a uniform pressure during operation, to ensure the operating precision of machine tool and the precision of the workpiece, and to enhance the service life of machine, with free adjustment of stroke for the gliding block, as well as stable and reliable mechnical stopper and synchronized tension bar. Electric mode is applied for rear stopper, able for separate adjustments, fitted with digital display and ine-tuning device, easy and quick for regulation. Container
The machine working pressure, the pressing speed, the scope of the itinerary may need to carry on the adjustment according to the process. And the constant pressure to complete and scheduled two-way process, constant pressure the craft way. To have after the suppression guarantees pressure and time delay to be automatic return action. Optional accessories: photoelectric protection device. Stroke, pressure, time digital display system. Hydraulic system heating, cooling device. Plc programmable controller, blanking buffer device, mould heating and temperature control device, in die with floating guide and rolling bracket, etc.
Backed by a team of expert professionals, we are involved in manufacturing, and supplying Industrial Door Making Hydraulic Press Machine . These are mainly used in PTFE molding, rubber molding and deep drawing of aluminum canes. Industrial Door Making Hydraulic Press Machine provided by us feature durability, low maintenance, easy installation, cost-effective and abrasion corrosion resistance. Our valued patrons can of Industrial Door Making Hydraulic Press machines from us in both standardized and customized forms, as per their needs and demands.
Capacity : 600 to 1500 Tons Piston size : 450 to 530 mm Stroke Length: 800 to 1000 mm Day light: 1100 to 1500 mm Shut height: 300 to 500 mm Table size (L x W): 1200 x 1000 to 2000 x 1500 Approach speed: 130 to 200 mm/sec Pressing speed: 10 mm/sec Return speed: 140 to 210 mm/sec Electric motor power: 60 to 100 HP Weight of the press: 18 to 60 Tons No. of cylinders: 2+2 No to 3+4 N Working height: 800 mm T Slots: T24 to T30 Working pressure: 210 bar
Capacity : 50 to 500 Tons Piston size : 200 to 565 mm Stroke Length: 350 to 700 mm Day light: 450 to 1000 mm Shut height: 100 to 300 mm Table size (L x W): 500 x 500 to 1000 x 1000 Approach speed: 70 to 130 mm/sec Pressing speed: 10 mm/sec Return speed: 80 to 140 mm/sec Electric motor power: 7.5 to 50 HP Weight of the press: 5 to 16 Tons No. of cylinders: 1+2 Nos Working height: 750 mm T Slots: T16 to T24 Working pressure: 210 bar
Capacity : 5 to 30 Tons Piston size : 80 to 140 mm Stroke Length: 300 to 400 mm Day light: 300 to 400 mm Table size (L x W): 350 x 300 to 450 x 300 Approach speed: 25 to 30 mm/sec Pressing speed: 5 to 8 mm/sec Return speed: 30 to 40 mm/sec Electric motor power: 3 to 5 HP Weight of the press: 2 to 5 Tons No. of cylinders: 1 No. Double acting Working height: 700 mm T Slots: T16 Working pressure: 210 bar
Capacity: 30 to 250 Tons Piston size: 140 to 400 mm Stroke Length: 300 to 600 mm Day light: 400 to 600 mm Shut height: 100 to 150 mm Table size (L x W): 500 x 350 to 850 x 600 Approach speed: 80 mm/sec Pressing speed: 10 to 15 mm/sec Return speed: 80 to 90 mm/sec Electric motor power: 5 to 25 HP Weight of the press: 4 to 15 Tons No. of cylinders: 1+2 Noâ??s
Capacity: 5 to 25 Tons Piston size: 80 to 125 mm Stroke Length: 250 to 300 mm Day light: 300 to 400 mm Shut height: 50 to 100 mm Table size (L x W): 350 x 300 to 450 x 300 Approach speed: 20 to 30 mm/sec Pressing speed: 5 to 8 mm/sec Return speed: 30 to 40 mm/sec Electric motor power: 5 HP Weight of the press: 1 to 3 Tons No. of cylinders: 01 No. Double acting
The whole structure of the hydraulic press brake: Totally european design, streamlined looking, monoblock, welded steel frame rigid to deflection moment and high tensile with st44 a1 material. -hreger press brake incorporates estun controls offer not only failsafe Operation of the vital operations of the machine, but also offer the operator considerable assistance in carrying out the entire bending process. - high accuracy, high efficiency, simple and convenient operation, good performance. Machine type: Press brake, plate press brake Raw material: Sheet / plate rolling Material / metal processed: Stainless steel Power: Hydraulic Automation: Automatic, automation Extra services: Bending Certification: Ce, ce, iso After-sales service provided: Engineers available to service machinery overseas Color: Customization Voltage: 220v Warranty: One years free Dimension(l*w*h): 4100*2200*3500 Power(w): 18.5kw
Tonne from 25t-3000t, plate size from 400*400- 1800*8000mm Wooden or others under clients' requirement
Hydraulic press We are manufacturer and distributor of metal processing machines (hydraulic press, hydraulic brake, pipe bending machine, pipe processing machine, mechanical shearing machine, guillotine shears, cnc machines, and welding machines) shrink machines, and packaging machines in turkey. Our products are very good in quality and have ce and iso certificates. They have mechanical warranty at least for one year. We also give after selling services to fix machines problems and to train about know-how. If you need any kind of machine we can supply qualitative turkey made machines with competitive prices.
Hydraulic presses
Factory Direct Selling Cheap, high quality, durable machine Main technical parameters ITEM/MODEL Unit 40TA Liquid pressure Mpa 23 Travel mm 200 Gantry span mm 520 Work table size mm 400x460 Motor power kw 3 Pump displacement ml/r 5 Downlink speed mm/s 6.5 Return speed mm/s 9.5 Net weight kg 370
Main features: 1.Totally eu streamlined design, mono block by welding robots & apparatus and stress relief process by annealing treatment. 2.Tma machine engineers utilize parametric 3d solidworks using fem & doe analysis as well as static and mechanism analysis. 3.Adopt integrated hydraulic system, more reliable and easy for maintenance. And the hydraulic system from bosch-rexroth, germany, 4.Mechanical synchronous mechanism and the complex compensation are designed so as to raise the workpieces precision., 5.The stroke and distance of the backgauge is adjusted by the motor and is well adjusted by hand, the adjustment is displayed by digital meters. 6.Inch, single, continuous operation mode being designed for the machine and reversing and maintain time can be controlled by the time relays. 7.Safe fence and the electric interlocker have been designed for the machine to ensure the operation safety., Standard equipment: 1.System intermediate upper clamps with anti wedges 2.Plate support arms 3. Powered depth axis 4. Backstop 5. Light guards 6. Top and bottom tooling, 7. Estun e21 nc control 8. Germany bosch-rexroth hydraulic , 9. Telemecanique/ schneider electrics 10. Hydraulic and electrical overload protection 11. Squaring arm and front support arms 12. Delta inverter with ball screw and polished rod with 0, 05 mm accuracy. 13. Side guard is standard meeting ce regulations. Estun e21s nc press brake control system: 1., monochrome lcd box panel. 2., integral factor programmable freely 3., automatic, positioning control 4.Spindle allowance offset 5.Internal time relay 6.Stock counter 7.Backgauge position display, resolution in 0.01mm The best bending results, you can bend longer and deeper parts with standard wc67y-bend series.
