Diesel Gas Oil D2
Drive your operations forward with top grade Diesel E590 , 10PPM, the Ultimate fuel solution for high efficiency and lower emission. inbox for terms and conditions.
EN590 was introduced to coincide with the development of new emissions standards across the European Union. The overall goal has been to reduce the sulphur content of diesel fuel. Sulphur had been used as a lubricant in the fuel. Its role is taken by special additives in ULSD. Since 2007, diesel that conforms to EN590 has been referred to as Ultra Low Sulphur Diesel (ULSD) in the European Union. The phrase Ultra Low Sulphur Diesel is governed by different standards in other parts of the world. EN590 describes the physical properties that all automotive diesel fuel must meet if it is to be sold in the European Union, Croatia, Iceland, Norway and Switzerland. The EN 590 had been introduced along with the European emission standards. With each of its revisions the EN 590 had been adapted to lower the sulphur content of diesel fuel since 2007 this is called ultra low sulphur diesel as the former function of sulphur as a lubricant is absent (and needs to be replaced by additives). The quality of European diesel fuels is specified by the EN 590 standard. While these specifications not are mandatory, they are observed by all fuel suppliers in Europe. Automobile diesel en 590 is intended for application in diesel engines. Diesel motor fuel quality meets the requirements of European Standard EN 590. For operation in the conditions of a temperate climate following marks of fuel diesel automobile EN 590 are offered: Grade C limiting filterability temperature -5 C; Grade D limiting filterability temperature -10 C; Grade E limiting filterability temperature 15 C; Grade F limiting filterability temperature -20 C. The entire volume of produced diesel fuel quality meets the requirements for fuels for vehicles of Euro 4 and Euro 5. Low sulfur content in diesel EN 590 reduces emissions of sulfur oxides into the atmosphere, which is especially important for for inhabitants of big cities.
Hallo Good day we supplying Jet Fuel A 1 and EN 590 10 PPM and 50 PPM - Origin Kazhakstan and other Non sanctioned Countries Very genuine refinery - we have on going contracts - Long chain brokers please dont contact unless have direct contact with END buyer or Buyer Mandate - Need ICPO from direct buyer to refinery we assure best price and mark up ( conditional ) we can provide TTV, TTT, TTO , CIF , FOB
Vessel loaded with 100,000 MT EN590 10 ppm on the way to Singapore, available for TTO & redirect to buyer's destination. ETA Singapore 28/7/24. Seller shall provide: Q88 4Bill of Lading Estimated Time of Arrival (E.T.A) Q&Q Analysis Report Payment Invoice for title transfer Cargo Manifest Statement of Availability Certificate of Origin Note of Readiness (NOR)
Seller has existing ready stock of 100 million gallons of D6 Virgin oil fuel in Houston tank farm available for buyers & he is able to do tank to tank in Houston at a very competitive price.
Direct from Kazakhstan Refineries, EN 590 Ultra Low Sulphur Diesel(ULSD) & Jet Fuel A1, tank to tank or CIF transactions are available. Kazakhstan origin with very competitive prices. Also available Azerbaijan origin EN590 10 ppm & Jet fuel A1 from state owned refinery.
Automobile diesel fuel (EN 590) Grade E (winter), recommended for use at ambient temperatures up to minus 15 C (limiting filterability temperature). Diesel fuel EN 590 (EN 590) Grade E is obtained from petroleum refined products and is intended for use as automotive fuel for diesel engines of cars and trucks. Diesel fuel meets the requirements of the international standard EN 590/2000 and is characterized by a low content of sulfur, aromatic hydrocarbons and a high cetane number, which leads to an overall reduction in sulfur oxide emissions, a decrease in the amount of particulate matter in exhaust gases and the formation of deposits in the fuel system of cars and heavy vehicles, reducing exhaust smoke and is the key to good starting properties of the fuel during cold start of the engine. The oil refining industry produces diesel fuel in accordance with GOST 305-82 of three grades: L - summer, used at ambient temperatures above 0 C; 3 - winter, used at temperatures up to -20 C (in this case, winter diesel fuel should have a stagnation
Quantity: Total Quantity of 300,000 MT of Diesel Gas-oil Ultra Low Sulphur (EN590) CIF/FOB Loading Port: Port of Yanbu, Saudi Arabia
(EN590) 10 PPM/50PPM Origin: Kazakhstan The detailed specification: Meets all International Standards Total Spot quantity order: 100,000MT The price and discount: - FOB ROTTERDAM AND CIF OTHER COUNTRY: DISCOUNT $50 PER MT FROM NWE PLATTS - CIF ASIA: DISCOUNT $70 PER MT FROM SINGAPORE PLATTS Shipment: - TANK TO VESSEL ROTTERDAM PORT or DESTINATION PORT as per conditions in Seller`s FCO Payment terms: As agreed per attached Seller`s SCO / FCO and PROCEDURE, via MT103 Payment Procedure: According to the terms of the contract, to be mutually agreed upon by Buyer & Seller. Inspection: SGS for Quantity and Quality, at embarkation port, DIP TEST
We can supply Diesel en590 10ppm with very good price. Not necessary to follow seller process, seller will follow buyer own procedure. If you want we can immediately arrange a meeting with End seller Only for serious buyer
We supply Diesel Fuel 100 ppm EN 590 on FOB and CIF Incoterms. FOB available from Rotterdam, Houston, and Fujairah. Occasionally we have spot deals. PRODUCT ORIGIN: Kazakhstan Contract directly with the Refinery. Send us an LOI to info@odissiglobal.com The EN 590 standard is the European diesel fuel specification for low sulphur content diesel and describes the properties diesel fuel must meet if it is to be used in automobiles. This specification of diesel is the grade required by a diesel-engine road vehicle (DERV) and the majority of agricultural machinery.
Diesel Exhaust Fluid (DEF) is a solution of urea and water that's injected into the exhaust stream of diesel vehicles to turn NOx gases (harmful emissions) into nitrogen and water. This system is called a Selective Catalytic Reduction (SCR) implemented by vehicle manufacturers to meet EPA emissions standards in 2010.
L/C ,DLC, SBLC payment is accepted, NO upfront, pre-payment. Minimum Order Quantity is 100k/mt if spot. We are one of the most precise on non-sanctioned supply due to strict requests of our clients. We are in direct colloboration with reputable sellers,resellers,retailers,manufacturers and also well known refineries within our portfolio. Both as buyer and seller according to the necessarities in our partnerships.
EN590 Diesel (10PPM) ULSD (Ultra Low Sulfur Diesel) is a premium diesel fuel that conforms to the European standard EN590, with an ultra-low sulfur content of only 10 parts per million (PPM). This type of diesel is known for its environmental benefits and is widely used in modern diesel engines.
EN590 Diesel is an ultra-low sulfur diesel fuel designed for modern diesel engines. It offers: Minimal sulfur content for reduced emissions. High cetane number for efficient combustion. Enhanced lubricity for engine protection. Cold weather performance. Compatibility with emission control systems. Excellent storage stability. This clean-burning fuel promotes environmental responsibility and optimal engine performance.
Diesel Gasoil EN-590 10PPM is a premium-grade diesel fuel that meets the stringent European Union standards for quality and environmental performance. With a maximum sulfur content of 10 parts per million (PPM), this ultra-low sulfur diesel (ULSD) offers exceptional cleanliness and efficiency, making it an ideal choice for modern diesel engines. Key Features: Ultra-Low Sulfur Content: Contains only 10 parts per million of sulfur, ensuring reduced emissions and enhanced environmental sustainability. High Energy Density: Provides superior energy density, resulting in improved fuel efficiency and engine performance. Engine Compatibility: Compatible with a wide range of diesel engines, including modern high-pressure common rail (HPCR) systems, ensuring optimal performance and reliability. Enhanced Lubricity: Formulated with additives to enhance lubricity, protecting critical engine components and prolonging engine life. Cold Weather Performance: Engineered to perform well even in cold weather conditions, with excellent cold flow properties for reliable starting and smooth operation in sub-zero temperatures. Benefits: Environmental Sustainability: By significantly reducing sulfur emissions, Diesel Gasoil EN-590 10PPM helps mitigate air pollution and minimize environmental impact, contributing to a cleaner and healthier environment. Improved Engine Performance: With its clean-burning properties and high energy density, this diesel fuel ensures optimal combustion, resulting in increased power output, reduced fuel consumption, and lower maintenance costs. Compliance with Regulations: Meets the strict quality standards set forth by the European Union for diesel fuel, ensuring compliance with regulatory requirements and avoiding costly penalties. Versatility: Suitable for a wide range of applications, including transportation, industrial, agricultural, and commercial use, providing versatility and reliability across various industries. Target Audience: Transportation Companies: Ideal for trucking companies, logistics providers, and fleet operators seeking to optimize fuel efficiency and minimize emissions in their diesel-powered vehicles. Industrial Users: Suitable for use in generators, machinery, and equipment in various industrial settings, offering reliable performance and compliance with environmental regulations. Commercial Businesses: Suitable for use in commercial vehicles, construction equipment, and agricultural machinery, providing dependable fueling solutions for daily operations. Make the Switch to Diesel Gasoil EN-590 10PPM and Experience Cleaner, More Efficient Diesel Power!
**Professional Fuel Supply Offer** **Product:** - DIESEL, GAS , OIL , EN590, JET A-1, D1 , D2 D-6 - Monthly Quantity: 50,000 MT - 10,000,000 MT **Pricing:** - Prices: Negotiable - CIF terms available - EN590 FOB - Jet A-1 Fuel FOB - D1 FOB - D2 FOB - D6 FOB **Contact Information:** WhatsApp: +17705881989 WeChat: +14043768928 Email: wpaul@pbwmanufacturing.com **Requirements for Proceeding:** - Buyer to issue Irrevocable Corporate Purchase Order (ICPO) along with company Certificate - Buyer must have TSR **Storage Information:** - Fuel is stored at Vopak and Kinder Morgan, renowned Tier 1 Tank Storage Facilities in Rotterdam, Houston, Fujairah, Duqum, and Qatar. . TTT Procedure for FOB Dip and Pay, Rotterdam Port (E-tank / Non-negotiable) 1. Initial Steps: The buyer issues an Irrevocable Corporate Purchase Order (ICPO), company registration certificate, data page of the buyer's passport and an Authorization to Verify (ATV) the Tank Storage Agreement with the E-Tank provider. (Proof of funds will be waived if the ATV is successful.) 2. TSA Verification, CI and DTA: The seller verifies the TSA and upon successful verification, issues the Commercial Invoice (C.I). The buyer signs and returns the CI to the seller within 48 hours. The seller will also issue a DTA ( Dip Test Authorization) to be endorsed by the buyer and buyer's tank farm. 3. Proof of Product and Injection Schedule a. Injection Schedule: The seller releases the injection schedule to the buyer and the buyer's tank farm company. The buyer and their tank farm must sign and return these documents to the seller within 48 hours. b. Proof of Product (POP) Documents: Concurrently, the seller issues the following documents to the buyer: (a) Fresh SGS report (b) Product Passport (c) Injection Report (d) Unconditional DTA (e) Authorization to Sell and Collect (ATSC) (f) AuthorizationtoVerify(ATV) Option A �¢?? seller injects fuel into the buyer�¢??s tank. 4. Tank Storage Receipt: The buyer�¢??s tank storage company will issue a TSR for at least 5 days. The Lessee�¢??s name will include both the Buyer and the Seller. The refinery�¢??s name will also be included. 5. Injection of product into Buyer�¢??s tanks: Upon Buyer�¢??s confirmation of the POP documents in clause 5, Seller will commence injection of product into the Buyer�¢??s tank. 6. Dip Test: The Buyer is responsible for ordering SGS to conduct a dip test of the product in the Buyer�¢??s tank at the Buyer's expense. 7. Payment and Delivery: Following a successful SGS dip test, the Buyer must make a 100% payment via MT103/TT wire transfer for the total product within forty-eight (48) hours. The Seller will pay commissions to all intermediaries involved in the transaction within forty-eight (48) banking hours after confirmation of the Buyer's payment.
PETROALLIANCE diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS.
PETROALLIANCE diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS.
