Hdpe Wax (3404), PP homopolymer, PP random copolyme, LLDPE film, HDPE - film, PP & PE & PS, masterbatch, stretch film rolls, BOPP film, HMD.
Normally in filtration polyacrylonitrile refers to homopolymer acrylic which is essentially made from 100% of acrylonitrile. Homopolymer acrylic needle felt and filter bags for industrial filtration. This kind of needle felt is with good ability of acid and alkali resistance, anti-oxidation, hydrolysis resistance. It suits middle temperature and high acid, alkali concentration environment.
Normally in filtration polyacrylonitrile refers to homopolymer acrylic which is essentially made from 100% of acrylonitrile. Homopolymer acrylic needle felt and filter bags for industrial filtration. This kind of needle felt is with good ability of acid and alkali resistance, anti-oxidation, hydrolysis resistance. It suits middle temperature and high acid, alkali concentration environment.
Cyanuric acid or 1,3,5-triazine-2,4,6-triol is a chemical compound with the formula (CNOH)3. Like many industrially useful chemicals, this triazine has many synonyms. This white, odorless solid finds use as a precursor or a component of bleaches, disinfectants, and herbicides. In 1997, worldwide production was 160 million kilograms. Purity: 98.5%Min. Molecular formula: C3H3N3O3 Molecular weight: 129.07 Loaded production capacity: 100,000tons/year. Applications: Cyanuric acid is used as a chlorine stabilizer / buffer in swimming pools. It binds to free chlorine and releases it slowly, extending the time needed to deplete each dose of sanitizer. The antineoplastic drug teroxirone, is formed by reacting cyanuric acid with 3 equivalents of epichlorohydrin. Cyanuric acid is mainly used as a precursor to N-chlorinated cyanurates, which are used to disinfect water. Because of its trifunctionality, CYA is a precursor to crosslinking agents, especially for polyurethane resins and polyisocyanurate thermoset plastics.
Our Best Products: COE 54, COE 32, COE 36, CDBS Isobutanol 70/B, Nonionic Surfactant N 15 and other Many EMULSIFIERS. Many Other Products In Agricultural, Pharmaceutical, chemical & Rubber industry. With best regards
Phosphoric Acid Food Grade 85% And 75%, Phosphoric Acid Tech Grade 85% And 75%, Boric Acid Powder 99%, Dmf 99%, Dmso 99%, Titanium Dioxide , Sulphur Elemental (powder /lump) 99%, Sodium Sulphate Non-anhyrans, Flakes, Calcium Chloride Dihydrate, Sodium Sulphate Anhydrous Cmc Food Grade And Tech Grade, Mono Ethylene Glycol (meg), Polyethylene Glycol (peg), Zinc Ash, Zinc Sulphate Monohydrate 33%, 27%, 21%, Xanthan Gum, Edta Fe 6%, Edta Acid , Pvc Rais, Pvc Resin (emulsin Type), Pvc Resin (supension Type), Hpmc, Hydrogen Peroxide 25%, 35%, 50%, Sles 70%, Caustic Soda Flakes And Pearls, Oxalic Acid, Citric Acid Monohydrate, Anhydrous Citric Acid, Homopolymer Polypropylene (pp), Paste Pvc Resin, Pvc Resin Sg-5, Thiourea, STPP, SODIUM HYDROSULFIDE, LABSA, Many Other Products In Agricultural, Pharmaceutical, Chemical & Rubber industry. With best regards.
We Have different fertilizers: POTASSIUM HYDROXIDE 99% (FLAKS), Potassium Carbonate 99%, Sop 50%, 53%, Mop, Map, Ammonium Sulphate, Ammonium Sulphate Caprolatum Grade, DAP, UREA 46%, NPK 20-20-20 and many Others. Many Other Products In Agricultural, Pharmaceutical, Chemical & Rubber industry. With best regards.
Our products are: Admol 20 - Dispursing agent for DF/WDG, Admol 21 - Dispersing agent for WP, Admol 4488 - For SC formulation, Admol 2700 - WDG formulation, Admol 7000 - wetting agent, Admol 4000 - wetting Agent, Admol 4480 - FOr SE formulation, other Many EMULSIFIERS. Many Other Products In Agricultural, Pharmaceutical, chemical & Rubber industry. With best regards
DADMAC is a high purity, aggregated, quaternary ammonium salt and high charge density cationic monomer. Its appearance is colorless and transparent liquid without irritating smell. DMDAAC can be dissolved in water very easily. Molecular Weight:161.5. There is alkenyl double bond in the molecular structure and can form linear homopolymer and all kinds of copolymers by various polymerization reaction. The features of DADMAC are: very stable in normal temperature, unhydrolyzed and noninflammable, low irritation to skins and low toxicity. This product has two specifications: 65% and 60%.It can be used as cationic monomer to produce monopolymer or copolymers with other monomers.
Dn-12â film-forming additives can be effectively used in vinyl acetate homopolymers and copolymers and terpolymers latex, and acrylic, styrene and vinyl , vinyl acetate latex. When used in latex paint and coating, it has good resin compatibility. As a new type of latex paint film-forming agent, dn-12 is safe, efficient and applicable to all types of synthetic resin. The advantages of dn-12 used in the latex paint is: better coalescence strength at low temperature, better viscosity stability, better color stability; and to improve the application of paint, such as weather resistance, accessibility of polish and clean, repair capacity and color forming ability. -
Phosphoric acid food grade 85% and 75%, phosphoric acid tech grade 85% and 75%, boric acid powder 99%, dmf 99%, dmso 99%, titanium dioxide, sulphur elemental (powder /lump) 99%, sodium sulphate non anhyrans flakes, calcium chloride dihydrate, sodium sulphate anhydrous, cmc food grade and tech grade, mono ethylene glycol (meg), polyethylene glycol (peg), zinc ash, zinc sulphate mono hydrate 33%, 27%, 21%, xanthan gum, edta fe 6%, edta acid, pvc rais, pvc resin (emulsin type), pvc resin (supension type), hpmc, hydrogen peroxide 25%, 35%, 50%, sles 70%, caustic soda flakes and pearls, oxalic acid, citric acid monohydrate, anhydrous citric acid, homopolymer polypropylene (pp), paste pvc resin, pvc resin sg 5, thiourea, stpp, sodium hydrosulfide, labsa, potassium hydroxide 99% (flaks), potassium carbonate 99%, sop 50%, 53%, MOP, MAP, ammonium sulphate, ammonium sulphate caprolatum grade, dap, urea 46%, npk 20 20 20.FOB, CFR, CNF, and CIF.
Name- Telstra Rope Product origin - Junagadh ,Gujarat, India HS code - 56074900 Minimum order - 20 feet container Packing detail - as per requirement Characteristics - Product: 6mm Polypropylene Cable Hauling Rope Application: Cable Hauling in HDPE Duct for telecommunication industry Tolerance: +/- 5% to be permitted for all the above mentioned values. Technical Specification : Product: 6mm Polypropylene Cable Hauling Rope Application: Cable Hauling in HDPE Duct for telecommunication industry Tolerance: +/- 5% to be permitted for all the above mentioned values. Particulars : Value Size : 6mm Length of Each Coil : 400m Weight of Each Coil : 6.5 Kg No. of Strand : 3 Strand Color : Blue/Blue/Yellow Material Used : Polypropylene Homopolymer Type Of Lay : Soft Lay Breaking Strength : Above 600kg Other Properties : Resistance to Abrasion Long Life and Durable Does not absorb Water Floats on Water
Acrylamide is made by microbiological method. With the characteristics of higher purity and no copper and lower iron content, it is especially suitable for polymer production and uniform molecular weight spread. It is mainly used to produce different kinds of homopolymers and modified polymers and also is widely applied to medicine, dyestuff, painting and daily chemicals industries. Usage: its polymer or co-polymer can be used as flocculant, mud conditioner, blocking agent, mineral dressing agent, textile treatment agent, intensifier and water treatment agent. Most acrylamide is used to synthesize polyacrylamides, which find many uses as water-soluble thickeners. These include use in wastewater treatment, gel electrophoresis (sds-page), papermaking, ore processing, and the manufacture of permanent press fabrics. Some acrylamide is used in the manufacture of dyes and the manufacture of other monomers. Cas:79-06-1 Loading: 15500kgs no pallets 14000kgs with pallets Port qingdao, china
EPDM rubber, polyproylene homopolymer, polypropylene copolymer, PBT, nylon 6.
GB1150 IN 25KG BAG pvc homopolymer for Pipe extrusion, or window profiles NEW
Name: (-)-Epigallocatechin gallate English Name: TEA CATECHIN; (2R, 3R) -2 - (3,4,5-TRIHYDROXYPHENYL) -3,4-DIHYDRO-1 (2H)-BENZOPYRAN-3 ,5,7-TRIOL 3 - (3,4 ,5-TRIHYDROXYBENZOATE); 3,4-DIHYDRO-5 ,7-DIHYDROXY-2R-(3,4,5-TRIHYDROXYPHENYL)-2H-1-BENZOPYRAN-3R-YL-3 ,4,5-TRIHYDROXY-BENZOATE; (-)-CIS-3, 3 ', 4', 5,5 ',7-HEXAHYDROXY-FLAVANE-3-GALLATE; (-)-CIS-2-(3,4,5-TRIHYDROXYPHENYL) -3,4 -DIHYDRO-1 (2H)-BENZOPYRAN-3 ,5,7-TRIOL 3-GALLATE; (-)-CIS-3 ,4-DIHYDRO-5 ,7-DIHYDROXY-2-(3,4,5-TRIHYDROXYPHENYL) -1 (2H)-BENZOPYRAN-3-YL GALLATE HYDRATE; (-)-EPIGALLOCATECHIN GALLATE; EPIGALLOCATECHIN GALLATE CAS NO. :989-51-5 Molecular formula: C22H18O11 Molecular Weight: 458.38 Melting point :257-258 ° C Shape: white powder Storage conditions 2-8 ° C price:USD 320
Dadmac/ dmdaac (diallyl dimethyl ammonium chloride 60% & 65%) Product description: 1. Dadmac is a high purity & high charge density cationic monomer. There is alkenyl double bond in the its molecular structure and it can form linear homopolymer pdadmac and other copolymers by polymerization reaction. It is widely used to form copolymer and homopolymer. 2. The related items Itemsdadmac 60%dadmac 65% Appearancecolorless to light yellow liquidcolorless to light yellow liquid Solid content60% min65% min Ph value5-75-7 Ash 3 max3 max Colour(apha)50 max50 max Packing and delivery Packing: packed in 200kg drum, 1000kg ibc drum, or others according to clients Delivery: within 7 days after order confirm Storage: store in a cool, well-ventilated area away from incompatible materials and ignition sources The storage period is twelve months
What is Polyvinylpyrrolidone PVP ? Polyvinyl pyrrolidone (PVP), a non-ionic polymer, is one of the most distinctive, well-studied and widely studied fine chemicals in N-vinylamide polymers. Has developed into non-ionic, cationic, anionic 3 categories, industrial grade, medical grade, food grade 3 specifications, relative molecular weight from thousands to more than one million homopolymer, copolymer and crosslinked polymer series products, and with its excellent unique properties have been widely used.
Features of PP plastic faucet PP is a semi-crystalline material. It is harder than PE and has a higher melting point. Since the homopolymer PP is brittle at temperatures above 0 �° C, many commercially available PP materials are random copolymers with an ethylene content of 1-4% or block copolymers with a high ethylene content. Copolymer PP material has low heat distortion temperature (100C), low transparency, low gloss and low stiffness, but higher impact strength. The strength of PP increases with increasing ethylene content. The Vicat softening temperature of PP is 150 �° C. Due to the high degree of crystallinity, this material has very good surface rigidity and scratch resistance. PP does not have the problem of environmental stress cracking. Generally, PP is modified by adding glass fiber, metal additives or thermoplastic rubber. PP flow MFR range is 1 ~ 40. PP materials with low MFR have better impact resistance, but lower strength. For the same MFR material, the copolymer type has higher strength than the homopolymer type. Due to crystallization, the shrinkage of PP is very high, usually 1.8% to 2.5%. The uniformity of shrinkage direction is much better than PE-HD and other materials. Adding 30% glass additives can reduce the shrinkage to 0.7%. Homopolymer and copolymer PP materials have excellent resistance to moisture absorption, acid and alkali corrosion resistance and resistance to dissolution. However, it cannot resist aromatic hydrocarbons, such as benzene solvents, chlorinated hydrocarbon (carbon tetrachloride) solvents, etc. Use of PP faucet: high quality and low price, non-toxic and tasteless, environmental protection, waterproof, product appearance, quality, sanitary, waterproof, durable, practical, environmentally friendly
HDPE is one of the major thermoplastics and is a widely used type of polyethylene (PE). Its resins include ethylene homopolymers as well as copolymers of ethylene and alpha-olefin monomers such as 1-butene, 1-hexene and 1-octene. HDPE has higher crystallinity compared to LDPE and LLDPE which results in higher mechanical properties such as stiffness, modulus and tensile strength, higher temperature resistance, improved barrier properties as well as improved chemical resistance to a variety of solvents and chemicals. HDPE properties can be adjusted by controlling the molecular weight, molecular weight distribution, degree and type of short chain branching and amount of long chain branching to design resins with optimum performance for different end-use applications. Applications: HDPE is used worldwide in a very large variety of applications such as rigid containers, toys, film products, sheet products, injection-molded articles, pressure and non-pressure pipes, geomembranes, automotive parts, and fuel tanks.