Based up on the customer requirement based up on the application
Fiber optic media converter 10M/100M media converters and 1000M media converters Products capability: According with the protocals: IEEE 802.3 IEEE 802.3u Fast Ethernet and IEEE802.3ab Support long data packet Easily for setting and debugging Technology specification: Wavelength:1310nm and 1550nm LAN port speed:10M/100M and 1000M Transimission distance:20km 40km 60km 80km 120km
Miniature DC-DC converter Power < 10w Sip, dip, smt
Solar Batteries,Gel Batteries,AGM Batteries,Nickel cadmium Batteries,Lithium batteries, Battery chargers, UPS, Static Frequency Converters, Motor Generator Frequency Converter,Rotary Frequency Converters, Dynamic frequency converter,Variable frequency drive,DC-DC Converters, Stabilizers, Solar Panel Clean Robots, Solar Inverters, 110Vdc Electricity Inverters, 125VDC Industrial UPS, POE DC UPS.
Rotary Frequency Converters, static frequency converters (from 50Hz to 60Hz, 60Hz to 50Hz, 60Hz to 400Hz, to 1500Hz) are used for shipyards,shiprepair,shipbuilding,navy,port,docks,oil fields,airports,testing,ect.
Rotary Frequency Converters, static frequency converters (from 50Hz to 60Hz, 60Hz to 50Hz, 60Hz to 400Hz, to 1500Hz) are used for shipyards,shiprepair,shipbuilding,navy,port,docks,oil fields,airports,testing,ect.
Rotary Frequency Converters, static frequency converters (from 50Hz to 60Hz, 60Hz to 50Hz, 60Hz to 400Hz, to 1500Hz) are used for shipyards,shiprepair,shipbuilding,navy,port,docks,oil fields,airports,testing,ect.
1. Input ports: 1xhdmi. 2. Output ports: 1xrca (yellow, white, red) 3. Dimensions (mm): 66(d) x55(w) x20(h) 4. Wight (g): 40 Product demension 68(d)x55(w)x20(h)mm Product n.W 0.04kg Package size 11.2*9*6.8cm N.W¡êo 0.06kg Carton size 35.5*31.5*33.5cm G.W¡êo 11kg (50pcs/carton¡ê©
ABB standard drive acs550 0.75kw to 355 kw - driveit low voltage AC drive. The abb standard drive is simple to buy, install, configure and use, saving considerable time. The drive has common user and process interface with fieldbus, common software tools for sizing, commissioning, maintenance and common spare parts. The abb standard drive can be used in a wide range of industries. Typical applications include pump, fan and constant torque use, such as conveyors. The abb standard drive is ideal in those situations where there is a need for simplicity to install, commission and use and where customising or special product engineering is not required.
SN201MM converter use one single source with VGA port or single source with YPbPr component accessing to single sink with HDMI port. The converter / switcher allows RGB signal to be converted easily to TMDS signal. Features One YPbPr input. One VGA input. R/L analog audio input.(can’t be used with stereo Mini-Jack audio at the same time). 3.5mm Stereo Mini-Jack audio input. (can’t be used with R/L audio input at the same time). One HDMI signal output. Support input up to 1080P via component. Support VGA input: 800x600,1024x768,1152*864,1280*720,1280x768,1280x800,1280x960,1280x1024,1360x768,1366x768,1440x900,1680x1050,1920x1080 HDMI output resolution:720P/ 60Hz. 1080P/ 60Hz Adaptive PAL / NTSC standard. LED indication: when source or sink is working, LED relative to is light. Inputs can be switched with the IR remote control,also can be controlled by button. Support output up to 20metres AWG26 cable length Installs in minutes Need DC5V/2A power supply
The converter can turn the CVBS signal + Audio (L/R) input signal into the HD Signal output. The converter can improve and scale the input analog audio and video signal to the more stable and clear 720p or 1080p digital signal output. Inputs: 3RCA Outputs: 1 HDMI Support: CEC 1080P
The device can converter the HDMI signal to SD-SDI, HD-SDI and 3D-SDI signal. It integrates SDI receiver and HDMI modulator to help the device to change the HDMI signal to SDI signal and embed the audio signal from HDMI into the SDI signal to do simultaneously transmit of the audio and video. FEATURES Input Video Signal: One HDMI Input Video Signal Output: Two SDI output that support SD-SDI,HD-SDI and 3G-SDI signal. Support HDMI Resolution:480I@60Hz?576I@50Hz?720P@50Hz?720P@60Hz?1080I@50/60Hz?1080P@25 Hz?1080P@30 Hz?1080P@50/60Hz. HDMI Output:720P/ 60Hz,1080P/ 60Hz,PASS Three Modes For Choose(Default PASS Mode) Support Both SDI Output simultaneously. Output Audio Signal: SDI Built-in Support Auto Recognition Resolution Audio and Video Output Simultaneously No loss of quality Installs in minutes Wide voltage input, It can support DC 5V~ 12V input
High quality power converter with AC bypass function Technical Features: * Using the fifth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. It's service life can up to 15 years or more. *Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter's usage, which reduced the cost of equipment investment, easy to connect wires and control. * Pure sine wave output with good transient response, little harmonic distortion, higher conversion efficiency and stable output voltage features. *Adopted low frequency isolated transformer, high conversion efficiency and stable performance * Output AC Power is suitable for all types of home appliances, electric tools, electric motors etc. * Converter has the function of filtering the grid disturbance and interference at the same time, which is a good performance of stabilized voltage and frequency power, to provide a more stable and pure power supply environment for the backend devices * Safety and reliable, the input single-phase electric and output three phase electric is complete electrical isolated. * Pure sine wave output, has higher efficiency and higher capability of driving load. *Output perfect protection function, with output over-voltage, overload, short circuit, over temperature, self-diagnosis protection and other protection * Powerful data display function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display. * The input voltage, output voltage, frequency and phase can be custom made.
Input: 4 ... 20 mA / 0 ... 10 V Output(Isol.GND): 4 ... 20 mA / 0 ... 10 V Accuracy: 0.1% F.S. IP rating: IP54
Three phase input,110KW / 150HP,210amps,380V-480V,size:690*370*350mm,GW57KG,Shenzhen Motor-Driver Technology Co.,Ltd,specializes in frequency inverter/AC drive,with over 18 years experience,our product have got highly recognized at home and abroad.The invertersâ?? voltages range covers 110V-500V, power range covers 0.4KW-500KW, which can meet the needs of high-end applications in many industries. The Inverters are widely used in machine tools, plastics, printing, packaging, textile, electronic equipment, building materials, metallurgy, coal mine, municipal and other industries. We are recruiting agent in global these two months,if any interests,please feel free to contact me. -
Product Structure 1. Bypass Cabinet (Optional) The by-pass cabinet or switching cabinet may employ isolating breaker, vacuum contactor or the combination, depending on the user¡¯s working conditions. The function of by-pass cabinet is to put the motor into operation in industry frequency grid after the WLD-HVF exits, so as to ensure the continuity of user¡¯s production. The switching cabinet is designed to divert the WLD-HVF output to different motors. 2. Transformer Cabinet Used for installation of Phase-shift transformer, it is dry type transformer with functions of temperature display and over-heat protection, also with insulation grade of H. The secondary multi-winding output provides phase-shift power supply to the power unit. This can greatly improve the current waveform on grid side and reduce the harmonic interference of the equipment to power grid lower of the National Criterion. 3. Power Unit Cabinet Used for installation of power units, which adopted imported high quality components inside, all power units are installed on the sliding seat, it is very easy to replace. 4. Control Cabinet Used for installation of low voltage control components, there are controller, PLC, UPS, Electric siren, DC 24V power supply, Control Power Source Switch, Wiring Terminals, Touch Screen, Operation Button etc. The equipment adopted fiber optical communications, which has a very good EMI restraining performance; The transformer, control cabinet and all power units, are built in temperature protection, so it will be maintenance free. Technical Features Voltage source High-high frequency inverter, it can realize No-step speed regulation, which makes the typical motors into intelligent motors. Low harmonics input and high power factor, the typical value for power factor is 0.95 through whole speed regulation, even more higher, no need for power factor compensation. WLD-HVF output few harmonics, the motor does not generate extra heat and noise. Modularized design of power units, interchangeable and easy to produce and repair, the equipment can find any fault exactly based on advanced diagnostic procedures in MPU. The inverter still can operate even the faults for part of power units exists, if there are faults happen for inverter, the system can switch to power frequency through bypass function. Applicable to all kinds of power grid at home and abroad and suitable for typical high voltage motor. Colorful touch screen, easy to operate and maintenance. Able to realize remote control, DCS operation and communications with Host, and support all kinds of communications interfaces such as CAN, Profibus, Modbus, RS232, RS485 etc. Applied latest components, master control chip adopted TI¡¯s DSP F28335 and ALTERA¡¯s FPGA of EP3C to realize powerful processing capacity; Sampling adopted AD¡¯s AD7606 with 16 bit to ensure control accuracy of the system. The switchgear can satisfy safety requirements, and the pressure-relief channel of high voltage switch can ensure safe use of operators. Technical Parameters Series No Parameters Value 1 HVF Capacity(KVA) 250~8750kVA 2 Power of adaptive motor(KW) 200~7000KW 3 Input Frequency(Hz) 45~65Hz 4 Harmonics contents injected to power grid 0.95%(>20% of rated load) 7 Efficiency >96%(under a rated load) 8 Output frequency(Hz) 0.5~120Hz 9 Precision of output frequency 0.01Hz 10 Rated output current(A) 36~600A 11 Overload capability 120%(1min), 150%(3s), 200%(Immediate protection) 12 Control mode V/F control or Vector control 13 Analog input 0~10V/4~20mA 14 Analog output 0~10V/4~20mA Optional (2 channels) 15 Boolean input/output Communications/Default point (expandable) 16 Acc & Dec time (S) 0.1~3000s 17 Altitude
Product Structure 1. Bypass Cabinet (Optional) The by-pass cabinet or switching cabinet may employ isolating breaker, vacuum contactor or the combination, depending on the user¡¯s working conditions. The function of by-pass cabinet is to put the motor into operation in industry frequency grid after the WLD-HVF exits, so as to ensure the continuity of user¡¯s production. The switching cabinet is designed to divert the WLD-HVF output to different motors. 2. Transformer Cabinet Used for installation of Phase-shift transformer, it is dry type transformer with functions of temperature display and over-heat protection, also with insulation grade of H. The secondary multi-winding output provides phase-shift power supply to the power unit. This can greatly improve the current waveform on grid side and reduce the harmonic interference of the equipment to power grid lower of the National Criterion. 3. Power Unit Cabinet Used for installation of power units, which adopted imported high quality components inside, all power units are installed on the sliding seat, it is very easy to replace. 4. Control Cabinet Used for installation of low voltage control components, there are controller, PLC, UPS, Electric siren, DC 24V power supply, Control Power Source Switch, Wiring Terminals, Touch Screen, Operation Button etc. The equipment adopted fiber optical communications, which has a very good EMI restraining performance; The transformer, control cabinet and all power units, are built in temperature protection, so it will be maintenance free. Technical Features Voltage source High-high frequency inverter, it can realize No-step speed regulation, which makes the typical motors into intelligent motors. Low harmonics input and high power factor, the typical value for power factor is 0.95 through whole speed regulation, even more higher, no need for power factor compensation. WLD-HVF output few harmonics, the motor does not generate extra heat and noise. Modularized design of power units, interchangeable and easy to produce and repair, the equipment can find any fault exactly based on advanced diagnostic procedures in MPU. The inverter still can operate even the faults for part of power units exists, if there are faults happen for inverter, the system can switch to power frequency through bypass function. Applicable to all kinds of power grid at home and abroad and suitable for typical high voltage motor. Colorful touch screen, easy to operate and maintenance. Able to realize remote control, DCS operation and communications with Host, and support all kinds of communications interfaces such as CAN, Profibus, Modbus, RS232, RS485 etc. Applied latest components, master control chip adopted TI¡¯s DSP F28335 and ALTERA¡¯s FPGA of EP3C to realize powerful processing capacity; Sampling adopted AD¡¯s AD7606 with 16 bit to ensure control accuracy of the system. The switchgear can satisfy safety requirements, and the pressure-relief channel of high voltage switch can ensure safe use of operators. Technical Parameters Series No Parameters Value 1 HVF Capacity(KVA) 250~8750kVA 2 Power of adaptive motor(KW) 200~7000KW 3 Input Frequency(Hz) 45~65Hz 4 Harmonics contents injected to power grid 0.95%(>20% of rated load) 7 Efficiency >96%(under a rated load) 8 Output frequency(Hz) 0.5~120Hz 9 Precision of output frequency 0.01Hz 10 Rated output current(A) 36~600A 11 Overload capability 120%(1min), 150%(3s), 200%(Immediate protection) 12 Control mode V/F control or Vector control 13 Analog input 0~10V/4~20mA 14 Analog output 0~10V/4~20mA Optional (2 channels) 15 Boolean input/output Communications/Default point (expandable) 16 Acc & Dec time (S) 0.1~3000s 17 Altitude
GBS8218 can be of various RGB (CGA, EGA, etc.) signals into VGA signal, you can direct an external liquid crystal display, CRT displays, projectors, LCD TV, rear projection and other equipment. Easy to replace your existing display systems, picture quality good and the pictures are clear, stable performance, a wide range of industrial control equipment (CNC machine tools, such as display, import DCS displays, plastic injection machines, analytical instruments, navigation, import production line dedicated display , medical equipment, the airport railway, finance special equipment displays, special specifications for the display, import games, bowling and other entertainment facilities, special displays, etc.).
Solar Batteries,Gel Batteries,AGM Batteries,Nickel cadmium Batteries,Lithium batteries, Battery chargers, UPS, Static Frequency Converters, Motor Generator Frequency Converter,Rotary Frequency Converters, Dynamic frequency converter,Variable frequency drive,DC-DC Converters, Stabilizers, Solar Panel Clean Robots, Solar Inverters, 110Vdc Electricity Inverters, 125VDC Industrial UPS, POE DC UPS
Study of DC Drive Trainer (Dual Converter) - BRAND - VIJAYANTA, INDIA 1. Study of DC Drive Trainer (Dual Converter), Model: SPDC 302 With loading arrangement and 1 HP DC motor. Suitable for to study speed control separately excited dc motor using single Phase dual converter.
