High Performance Frequency Converter

Rated power : 5KW
Pure sine wave solar inverter
Output power factor 1
Built-in 80A MPPT solar charger
Built-in anti-dust kit for harsh environment
Support parallel operation up to 3 units (available for 3KW-5.5KW 48V)
WIFI remote monitoring (optional)
Compatible to generator

Power: single phase, 220v:0.4kw-2.2kw
Three phases, 380v:0.75kw-630kw
Output frequency:0-650hz
Voltage, undervoltage, over temperature, open phase, overload.... Totally 23 situations.
7.Speed control ratio:1:100 (svc)
8.Carrier frequency:1~15.0khz
Main features
Compact size and less weight.
Combined module for 3.7kw or below with high reliability.
Reasonable layout with less interference and better ventilation.
Combined module with perfect reliability.
3 control modes available: vf control, sensorless vector control, torque control.
High start torque: 0.5hz, 180%(vector control)
16 steps speed control, simple plc function, pid function
7 digital inputs(including 1 pulse input), 2 analog input and 2 analog output, 2 relay output, 1 open-collector output.
Automatic output voltage regulation(avr)
Rs 485 interface(modbus rtu communication protocol)




Packing: 1set per carton or wooden case
Weight:>1.5kg
Dimensions:>132mm*74mm*162mm

High Voltage Frequency Converter Series
This frequency converter, petroleum and chemical and other harsh environments to soft start, soft stop and operation process control of the motor and energy-saving applications, especially suitable for coal mine or ground mine to enhance the winch, belt conveyor, scraper conveyor, coal feeder, fan, pump, pressure fan and emulsion pumps and variable frequency speed control of other equipment. Explosion-proof frequency converter designed specifically for hazardous area locations. These drives can be mounted next to the motor in the classified area, providing significant installation cost savings - along with the traditional VFD benefits of energy savings, speed and torque control, and system diagnostics. our low voltage frequency converter and emulsion pump frequency converter is also hot selling.

Input Voltage 12V / 24V DC optional
Output Voltage 115V / 230V AC optional
Portable power for AC products, AC outlets for connecting multiple loads
High surge capacity for products that require more power to start
High efficiency converts virtually all of the battery's power to AC
Mounting brackets for convenient installation
Heavy duty stud-connection mounting
RS232 communication port
WIFI/BMS Optional
Overload and over temperature shut down
Low voltage and over voltage alarm/cut off
Input reverse protection
Short circuit protection
PI15 series is a pure sine wave inverter, high frequency machine solution, the product is small size, the solution is reliable and stable, the main function is to invert the DC 12VDC battery or 24VDC battery to AC 230VAC or AC 115VAC output, mainly used for emergency use Electricity, car inverter,
outdoor electricity and other occasions.

GRES is an intelligent and modular power supply equipment integrating lithium battery and MPCS. According to different application scenarios, lithium battery, bidirectional DC / AC converter, bidirectional DC / DC converter, Static switch and Power management system can be arbitrarily combined to realize grid connected power supply, off grid power supply and off grid uninterrupted power supply power supply, static reactive power compensation, harmonic suppression and other functions. The system can have access to new energy, power grid, diesel generator and to rreasonable configuration, scientific utilization, to provide users with green, environmental protection, noise free, high reliability and
high security power services.

Safe and reliable
High quality li-ion cell for mobile use
Laser welding connection with high strength and low impedance
Cells is designed with PC holders and reinforce steel structure to guarantee the highest safety of the system in transportation, installation and operation
Damping pad design to improve the impact resistance of the system
IP54 safe and reliable operation in outdoor environment
Serially designed PCS and battery pack eliminates circulating current and improve system reliability.
Integrated BMS,DC, AC multi-layer protection, maximum safety performance design

Efficient and Convenient
Integrated system, standard modular power module and battery module, easy for installation, maintenance and capacity expantion
Easy access to PV and diesel generator, intelligent muli-energy management.
Fixed on the ground or mounted on vehicle, can be loaded and unloaded by forklift and hoisted by lifting ring
Multi systems could be connected in parallel

Cost optimization
One investment, multiple benefits:Peak shaving, backup power supply, microgrid building,power quality improving and energy storage,etc.
Small size, light weight, less space and installation cost
Long cycle life, low failure rate, reduce operation and maintenance investment
Maximize green energy utilization.


Rated output power: 50KW
Rated energy: 75KWH

Performance introduction:
1.Using dsp as the core of control unit to achieve high-speed high-performance control;
2.Way of speed control: svc, vc, v/f control, torque control

3.Automatically idendtify the motor parameters, intelligent adjustment to the best control mode.

4.Deard time compensation and automatic slip compensation function, low frequency 0.25hz can be achieved under sensorless vector control.

5.Simple plc function can realize up to 16 segments speed and 4 segments acceleration control.

6.¡±one key to shuttle¡± keyboard, swirling free, two way custom button with the demand for expansion.

7.Multi-language, humanization display menu, highlighted oled+led simultaneous display 3 groups of state parameters.

8.Keyboard is hot-pluggable and can store/copy 4 groups of operating parameter programs

9.Powerful communications function which can support standard to support standard rs485 and modbus, meanwhile providing remote keyboard control.

10. Dual analog input, custom control mode, free combination of control factors

11.Short-circuit protection, more safer and more stable

12. New thermal management structure, unique duct design and thermostat heat agencies, allow the product to run more stable and longer

13 standards emc design to minimize pollution for power

14. All strengthened pcb coating working well in kinds of environments

The main application fileds: metallurgy, petroleum, chemical, textile, electric power, building materials, coal, medicine, food, paper, plastics, printing and dyeing, lifting, cable, washing, water supply, heating and ventilation, sewage treatment and other industries, machinery and equipment for: drawing machines, blenders, cutting machine, winding machinery, compressors, air pumps, grinders, conveyors, hoist, centrifuges and various speed control machinery



Standard

50Hz, 60Hz, 400Hz frequency converters ( indoor type, IP65 outdoor type, modular type ) from 6KVA to 4000KVA for Navy, shipyard, port, dock, Oil, airport;
Silver zinc battery for Navy, submarine, torpedo, airplane

Input voltage:220-690v
Output voltage: 220-690v
Power:0.4-630kw



According to your needs

STHS Consulting Ltd is an official partner of OMPECO Middle East, Africa, Asia and Pacific Islands (www.ompeco.me). I can be contacted at stephen@ompeco.me for matters concerning this order.

Our product, The Converter, is an innovative way to manage waste, transforming all forms of rubbish into a safe, dry, and reduced final product using a completely mechanical process that harnesses the principle of mechanical to thermal energy transformation.

The key benefits of OMPECO are:
- Zero Emissions: No pollutants or harmful substances released.
- Safe Output Material: Produces sterile, odourless, dust-free, non-fermenting, and vermin-free material.
- Significant Reduction: Up to 50% weight reduction and up to 80% volume reduction- Zero Landfill.
- Environmentally Friendly: No use of chemicals, combustion, microwaves, or pressure.

The Converter is a 100% sustainable, zero waste, zero emission solution that eliminates the need for waste separation. Simply load the machine, The Converter will remove any liquid, converting the waste into premium grade refused derived fuel (RDF) with high calorific value in only 30 minutes. The resulting RDF is a sterile, inert flock suitable for fuel or domestic disposal, eliminating odors, dust, and refrigeration needs while ensuring long-term storage stability. This can then be safely stored or even sold on for use in the circular economy (see attachment on medical waste)

Our YouTube page: https://www.youtube.com/@ompeco8850.