6 Inch Red Grey Stripes Paint Roller Suppliers and Manufacturers

Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor

ITO GLOBAL, SURAT, GUJARAT ( India ) We can supply high strength, quality tested and recyclable fresh PP VOVEN bags of size 29x43 inch , for filling grains (like wheat) up to 25-50-100 kgs with UV protection, BAGS Weight- as per customers requirements. as a replacement for costly Jute Bags, in packaging of 500 bags/bale with compressed packaging to save logistics costs. Size can be customized as per requirement. Also, available in transparent, milky white and colors. Bag Specification 1. Bag Size 29 x 43 inch ( 74 cm x 110 cm) 2. Bag weight 155 grams / PC (2% tolerance) 3. Mesh 11 x 11 4. UV rays protection 5. Flexible bag 6. Packaged in moisture proof and compressed bales of 500 Bag Pieces / bale 7. Estimated rates as mentioned. 8. Rates are for FOB, CIF, CFR Basis, Hazira, India. We can supply across any major port on CIF basis. 9. Samples are available.

ITO GLOBAL, SURAT, GUJARAT ( India ) We can supply high strength, quality tested and recyclable fresh PP bags of size 29x43 inch , for filling grains (like wheat) up to 25-50-100 kgs with UV protection, BAGS Weight- as per customers requirements. as a replacement for costly Jute Bags, in packaging of 500 bags/bale with compressed packaging to save logistics costs. Size can be customized as per requirement. Also, available in transparent, milky white and colors. Bag Specification 1. Bag Size 29 x 43 inch ( 74 cm x 110 cm) 2. Bag weight 155 grams / PC (2% tolerance) 3. Mesh 11 x 11 4. UV rays protection 5. Flexible bag 6. Packaged in moisture proof and compressed bales of 500 Bag Pieces / bale 7. Estimated rates as mentioned. 8. Rates are for FOB, CIF, CFR Basis, Hazira, India. We can supply across any major port on CIF basis. 9. Samples are available.

Pale yellow liquid at room temperature characteristic odor and taste or nearly odorless, free from rancidity or any objectionable odor and taste. Each batch of materials shall undergo strict sampling,inspection and screening for guaranteeing the affluent oil production and the excellent oil fragrance. Groundnut OIL Taste Neutral Impurities Negative Free Fatty Acid ( % ) max 0,10 Moisture ( % ) max 0,05 Peroxide Value ( meq O2/ kg ) max 5 Specific gravity at 20 degr C 0,91 - 0,93 Iodine value ( g / 100 g ) 82 - 110 Colour Lovibond 5 1/4 " Red max 2,5 Colour Lovibond 5 1/4 " Yellow max 25 C 12:0 C 14:0 (Myristic Acid) C 16:0 ( Palmitic Acid ) 6 - 14 C16:1 (Palmitoleic Acid) C 18:0 ( Stearic Acid ) 1 - 5 C 18:1 ( Oleic Acid ) 35 - 72 C 18:2 ( Linoleic Acid ) 13 - 44 C 18:3 ( Linolenic Acid )

PRODUCT DATA SHEET ACID RESISTANT BRICK Material : FIRECLAY Type Acid Resistant Brick Size (mm) : 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : * We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: * Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions - Heavy thermal shock Characteristic Fireclay Type Acid Resistant Brick - Test Standard Bulk Density, lbs/ft3 - 2.25 to 2.30 ASTM C-20 Water Absorption, % - 0.1 to 1.8 ASTM C-20 Apparent Porosity, % - 4.05 to 4.14 ASTM C-20 Acid Solubility (H2SO4), Loss in Mass,% - 6.1 to 6.8 ASTM C-279 Modulus of Rupture, Mpa - 14.6 ASTM C-67 Compressive Strength, PSI - 15500 to 17250 ASTM C-67 Abrasion Resistant , Volume in mm3 - 71 to 96 EN 102 Surface Hardness, MOHS Scale - 7 Thermal Conductivity, BTU-in/hr-ft-F - 6.94 to 7.12 ASTM C-236 Thermal Expansion Coefficient,in/in/Fx10-6 - 2.6 to 2.8 EN 103

PVC OG powder+lump regrind LS100 Material : PVC OG powder+lump regrind LS100 Category : PVC Type : OG powder+lump regrind Grade : LS100 SPECIFICATION : LG Chem product.6 colors included (white , grey ,blue, red, black , green),seperated by bag.K-Value : 67. Datasheet attached Origin : Korea - Busan Loading Weight : 23 Ton FOB (USD/Ton) : 650$ Packaging : Jumbo Bag Est. Shipping Time: 15, 30, 45 days

Factory Automatic Hot Eye Onion peeling process machine,from small capacity to big capacity Onion peeling process: the onion is manually fed into the hopper --- the conveyor belt automatically feeds the onion into the peeling box for peeling --- after peeling, the onion goes into the peeling roller. Under the action of high-pressure air at the side, the first and second layers of the onion are peeled off and sent out to complete the whole processing process. Features: 1. Advanced technology, reasonable mechanism, beautiful appearance, safe and reliable use, all stainless steel. 2. Automatic peeling without damage. 3. The depth of peeling is even. 4. The feeding belt is used for automatic feeding, which is simple in design and convenient in use. 5. Less peeling, high recovery rate of finished products, and over 98% of finished products. 6. Mechanical processing eliminates the hidden danger of manual processing of infectious diseases and unsanitary products. Parameters 1.process arrange diameter of round shape onion 30-150mm. 2.capacity 1000-1500kg/h 3.Power 3kw 4.Voltage 380V 5.Air Compressor :flow 1.5m2/min, pressure 0.7MPa ,power 11kw 6.Machine size 1.5*1.3*1.4m 7.Weight 420kg Start working flowing: 1.Fill onion in the loading box 2.Start the pneumatic valve switch 3.Start the power-supply switch 4.According to onion drying or fresh to adjust loading speed button/air pressure ,in order to ensure the clean degree of removing onion skin 5.When finished adjusting ,The equipment operates normally and automatically.

Refined sunflower oil is perfectly clean oil, which preserves all the nutrients during the production process. This oil can be used in conditions of extremely high cooking temperatures. Margarine and cooking fats are made of refined sunflower oil by hydrogenation. Refined sunflower oil is also used in manufacturing of canned food, as well as in soap boiling and paint and varnish industry. We offer refined sunflower oil packed in bulk and in PET bottles. Custom design print labels Physical properties Refractive index:1.465-1.475 at 40 deg. C Density:0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste : Excellent Odor : None not sensed Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Colour: Max.1.2 red, lovibond tintometer 5/20 inch Chemical specifications Peroxide:0.2 meq/KG. Of oil % soap:0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids):8-12 % unsaturated fat(-ty acids):87-91 %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value:190.32 koh/g. Of oil Iodine value:134.13 (wijs-hanus method) Feeding energy:900kcal Iron : < 0.02 mg/lt Packaging Details:1) JERRY CAN : 2L, 3L, 5L, 7L, 8L, 10L, 16L, 18L, 20L, 25L 2) BIG MOUTH JERRY CAN : 10L, 16L, 18L 3) PET BOTTLE : 500ML, 750ML, 1L, 1.8L, 2L, 3L, 5L 4) TIN : 16L, 18L 5) METAL DRUMS : 190KGS & 192KG 6) POLY DRUMS : 195KGS 7) FLEXI TANK : 21MT

Refined sunflower oil is perfectly clean oil, which preserves all the nutrients during the production process. This oil can be used in conditions of extremely high cooking temperatures. Margarine and cooking fats are made of refined sunflower oil by hydrogenation. Refined sunflower oil is also used in manufacturing of canned food, as well as in soap boiling and paint and varnish industry. We offer refined sunflower oil packed in bulk and in PET bottles. Custom design print labels Physical properties Refractive index:1.465-1.475 at 40 deg. C Density:0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste : Excellent Odor : None not sensed Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Colour: Max.1.2 red, lovibond tintometer 5/20 inch Chemical specifications Peroxide:0.2 meq/KG. Of oil % soap:0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids):8-12 % unsaturated fat(-ty acids):87-91 %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value:190.32 koh/g. Of oil Iodine value:134.13 (wijs-hanus method) Feeding energy:900kcal Iron : < 0.02 mg/lt Packaging Details:1) JERRY CAN : 2L, 3L, 5L, 7L, 8L, 10L, 16L, 18L, 20L, 25L 2) BIG MOUTH JERRY CAN : 10L, 16L, 18L 3) PET BOTTLE : 500ML, 750ML, 1L, 1.8L, 2L, 3L, 5L 4) TIN : 16L, 18L 5) METAL DRUMS : 190KGS & 192KG 6) POLY DRUMS : 195KGS 7) FLEXI TANK : 21MT

Refined sunflower oil is perfectly clean oil, which preserves all the nutrients during the production process. This oil can be used in conditions of extremely high cooking temperatures. Margarine and cooking fats are made of refined sunflower oil by hydrogenation. Refined sunflower oil is also used in manufacturing of canned food, as well as in soap boiling and paint and varnish industry. We offer refined sunflower oil packed in bulk and in PET bottles. Custom design print labels Physical properties Refractive index:1.465-1.475 at 40 deg. C Density:0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste : Excellent Odor : None not sensed Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Colour: Max.1.2 red, lovibond tintometer 5/20 inch Chemical specifications Peroxide:0.2 meq/KG. Of oil % soap:0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids):8-12 % unsaturated fat(-ty acids):87-91 %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value:190.32 koh/g. Of oil Iodine value:134.13 (wijs-hanus method) Feeding energy:900kcal Iron : < 0.02 mg/lt Packaging Details:1) JERRY CAN : 2L, 3L, 5L, 7L, 8L, 10L, 16L, 18L, 20L, 25L 2) BIG MOUTH JERRY CAN : 10L, 16L, 18L 3) PET BOTTLE : 500ML, 750ML, 1L, 1.8L, 2L, 3L, 5L 4) TIN : 16L, 18L 5) METAL DRUMS : 190KGS & 192KG 6) POLY DRUMS : 195KGS 7) FLEXI TANK : 21MT

Refined sunflower oil is perfectly clean oil, which preserves all the nutrients during the production process. This oil can be used in conditions of extremely high cooking temperatures. Margarine and cooking fats are made of refined sunflower oil by hydrogenation. Refined sunflower oil is also used in manufacturing of canned food, as well as in soap boiling and paint and varnish industry. We offer refined sunflower oil packed in bulk and in PET bottles. Custom design print labels Physical properties Refractive index:1.465-1.475 at 40 deg. C Density:0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste : Excellent Odor : None not sensed Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Colour: Max.1.2 red, lovibond tintometer 5/20 inch Chemical specifications Peroxide:0.2 meq/KG. Of oil % soap:0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids):8-12 % unsaturated fat(-ty acids):87-91 %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value:190.32 koh/g. Of oil Iodine value:134.13 (wijs-hanus method) Feeding energy:900kcal Iron : < 0.02 mg/lt Packaging Details:1) JERRY CAN : 2L, 3L, 5L, 7L, 8L, 10L, 16L, 18L, 20L, 25L 2) BIG MOUTH JERRY CAN : 10L, 16L, 18L 3) PET BOTTLE : 500ML, 750ML, 1L, 1.8L, 2L, 3L, 5L 4) TIN : 16L, 18L 5) METAL DRUMS : 190KGS & 192KG 6) POLY DRUMS : 195KGS 7) FLEXI TANK : 21MT

Indonesia origin MANUFACTURER - Solid Wooden Panels Door maker ***** Made from Red Meranti - Mix Meranti or Mix Hardwood *** High density wood *** Could be Standard Door Or White Prime finishing or Painting Sizes and Designed by demand *** MOQ = 350 sheets in 20ft container #### Payment by Bank Transfer Deposit

We are INDONESIA Solid Wooden Panels Doors & Door Frames Manufacturer Made from Vary wood species : Red Meranti - Mahogany - Acacia - Bangkirai - pINE All sizes available by demand Loading 20ft = 400 pcs Cheap SOLID WOODEN PANELS DOOR Price range usd 70 /sheet FOB Indonesia main port , Simple DOOR FRAMES usd 40/pc Made from Red Mix Hardwood #### Also could be Coating finished / Painting - White Prime finishing or Color painting ### MOQ 400 pcs in 20 ft Payment by Deposit Bank transfer in advance and balance against copy of B/L after shipment

We are INDONESIA Solid Wooden Panels Doors & Door Frames Manufacturer and Exporter ***** Made from Vary wood species : Mix Hardwood for Cheaper price and Red Meranti - Mahogany - Radiata Pine - Bangkirai ## also can be PRIME WHITE basic paint **** All sizes available by demand Loading 20ft = 350 pcs Price range usd 50 /sheet FOB Indonesia main port

We are INDONESIA Solid Wooden Panels Doors & Door Frames Manufacturer ## Made from Vary wood species : Red Meranti - Mahogany - Pinewood - Acacia - Bangkirai ## also can be PRIME WHITE ## Maroon Painting color ### All sizes available by demand ## Loading 20ft = approx 420 pcs ### Price range usd 50 /sheet FOB Jakarta , Indonesia main port

Features (%) Purity - 97 minimum Moisture - 10-12 maximum Total Ash - 4-6% Acid Insoluble residue - 0.4% maximum Starch - Negative Tanning Bearing gum - Negative Salmonella - Negative EColi - Negative Gum Arabic is used in printing, paint production, glue, cosmetics and various industrial applications, including viscosity control in inks and in textile industries. Gum Arabic is a complex mixture of polysaccharides and glycoproteins that is used primarily in the food industry as a stabilizer.

Features (%) Purity - 97 minimum Moisture - 10-12 maximum Total Ash - 4-6% Acid Insoluble residue - 0.4% maximum Starch - Negative Tanning Bearing gum - Negative Salmonella Negative EColi Negative Gum Arabic is used in printing, paint production, glue, cosmetics and various industrial applications, including viscosity control in inks and in textile industries. Gum Arabic is a complex mixture of polysaccharides and glycoproteins that is used primarily in the food industry as a stabilizer.