Three Phase Energy Meter Field Calibrator is a precision AC energy meter testing instrument, mainly used to test three phase energy meter error on site and measure various of AC parameters.
Especially developed for indication and
supervision of the three-phase circuit,
replaces an analogical ammeter, reducing
installation manpower and optimizing the
used one of spaces in the panel.
Ideal for protection of three-phase
networks is monitored and generally to
own alarm superior and inferior. Protection
of the parameters of programming by
password.
Especially developed for indication and
supervision of the three-phase circuit,
replaces an analogical voltmeter, reducing
installation manpower and optimizing the
used one of spaces in the panel.
Ideal for protection of three-phase
networks is monitored and generally to
own alarm superior and inferior. Protection
of the parameters of programming by
password.
13104 194Q 9Sy Three Phase Multifunction Power Meter Suppliers
Short on time? Let 194Q 9Sy Three Phase Multifunction Power Meter sellers contact you.
Especially developed for indication and
supervision of the three-phase circuit, replaces
an analogical ammeter, reducing installation
manpower and optimizing the used one of
spaces in the panel.
Ideal for protection of three-phase networks is
monitored and generally to own alarm superior
and inferior. Protection of the parameters of
programming by password.
Especially developed for indication and
supervision of the three-phase circuit, replaces
an analogical voltmeter, reducing installation
manpower and optimizing the used one of
spaces in the panel.
Ideal for protection of three-phase networks is
monitored and generally to own alarm superior
and inferior. Protection of the parameters of
programming by password.
The portable Three-phase standard power source is suitable for metering departments, power distribution terminals, power management, reactive power compensation devices and enterprise production.
INTRODUCTION
GF312V2 portable three phase multifunction energy meter calibrator is with comfort design, small size, and light weight. It is suit for electric power departments, measuring and quality examining departments and electric lab to field use.
TECHNICAL SPECIFICATION
Electrical parameters
Accuracy class 0.05%, 0.1%
Power Supply External power, 220V/110V, 50/60Hz
Phase voltage supply 45-450V, 50/60Hz
Li-Battery supply
Voltage measurement
Range 30-560V
Error ±0.05%
Harmonic 2nd-51st
Current measurement
Range (direct connection) 0.01-10A
Range (clamp CT) 5A,100A,500A,1000A,2000A (option)
Error (direct connection) ±0.05%
Error (clamp CT) ±0.2% (5A, 100A )
±0.5% (other)
Harmonic 2nd-51st
Power measure error
Active power (direct connection) ±0.05%
Active power (clamp CT) ±0.2% (5A, 100A)
±0.5% (other)
Reactive power (direct connection) ±0.1%
Reactive power (clamp CT) ±0.2% (5A, 100A)
±0.5% (other)
Energy measure error
Active energy (direct connection) ±0.05%
Active energy (clamp CT) ±0.2% (5A, 100A)
±0.5% (other)
Reactive energy (direct connection) ±0.1%
Reactive energy (clamp CT) ±0.2% (5A, 100A)
±0.5% (other)
Phase angle
Range 0-360
Resolution 0.01
Error ±0.05
Frequency
Range 45Hz-65Hz
Resolution 0.001Hz
Error 0.002Hz
Pulse output
Energy constant 25000
Pulse ratio 1:1
Output level 5V
Pulse input
Input channel 2
Input level 5-10V
Input frequency Max. 100Hz
Display
Resolution 7 TFT color (480-234)
Function
Vector diagram
Waveform
Energy accumulation
CT ratio test
Local parameter input
Wiring emulation
Self-calibration
Recorder check
Data storage
Data storage qty 5000
External extend memory
Screen printing
Communication port USB/RS232
Communication with PC
Upload data
External mini printer
External keyboard
Dimensions (WHD) (mm) 245-16870
Weight (kg) 1.8
Environmental conditions
Ambient temperature -25C to +45C
Relative humidity 30%-95%
The instrument GF312D1 is a precision 0.05% AC energy meter testing instrument, mainly used to test three phase energy meter error on site, measure all various of AC parameters and CT ratio & phase error, it is also as three phase reference energy meter in the laboratory. Mainly using test single phase or three phase meter error on site. GF312D1 energy meter calibrator is an ideal test tool for the metrological service of electricity power company.
The GF302D3 portable three phase energy meter test bench consists of an integrated three phase 120A current source and 600V voltage source and a class 0.02 three phase electronic reference standard meter.
The energy meter test bench is particularly designed for analysis of complete metering installations and local mains conditions. The meter test bench offers high functionality combined with an excellent menu guided operation via built-in thirty keys and colored 7" touch LCD-display. It can auto & manual test all kinds of energy meter error. Using on site or in the laboratory. It can preset a variety of test schemes for testing energy meter.
The GF302D1 three phase portable energy meter test equipment consists of an integrated three phase current source(up to 500V/120A or 500V/20A) and built-in three-phase electronic reference standard of accuracy class 0.05%. Characteristic features of the GF302D1 are its wide measuring range, high accuracy and high tolerance to unwanted external influences. The equipment offers high functionality combined with an excellent menu guided operation via built-in keyboards and colored 7" touch LCD-display. Voltage & current harmonics output from 2 to 63 times. This model portable meter test equipment can be programmable by PC, automatic generation of energy meter error test report.
To set up and take the load regulation of voltage, current, phase angle, frequency and power factor, also can be used as AC current source, AC voltage source or power source.
To set 2-128 times of the amplitude and phase harmonics, and it can be added to the base wave in every harmonic output.
Frequency value is adjustable (AB and phase C).
Voltage, current output a wide range, big power, high stability, waveform distortion degree is small.
Strong with load ability, but it can take capacitive, sensibility, resistance of composite type load or load and load regulation is higher than 0.01%.
To apply the 32 bit MPU + DSP + FPGA, powerful flexible.
To use hardware PID, fast response, the change of load will not cause output volatility.
Industrial frequency waves as high as 50000 points a week of the wave kneading, signal output without filter, precise output waveform, the harmonic output precision, harmonic distortion degree is small.
Range switching automatically
To use software calibration, simple operation, stable and reliable.
To have big screen, 320 x 240 LCD display, Chinese or English interface, operating simply.
To have perfect over-current, over-voltage, heat, a shorts-and-opens, overload protection, failure detection automatically.
With RS232 interface, and PC connection
To take place machine software, it can be output through the PC software program.
FEATURES
3s statistical interval, continuously record 168h
Support multi-brand current transformer
Up to 32G data storage space
Record up to 461 power energy parameters simultaneously
Up to 10000 screenshots saved
Support periodic recording function
Up to 3.9M/s USB high-speed transfer
Recording wave
FUNCTIONS
Energy loss calculator: classic active and reactive power measurements, unbalance and harmonic power, are quantified to pinpoint true system energy losses in dollars (other local currencies available).
Power inverter efficiency: simultaneously measure AC output power for power electronics systems.
Power wave data capture: GF438II analyzers capture fast RMS data, show half-cycle and waveforms to characterize electrical system dynamics (generator start-ups, UPS switching etc.).
Waveform capture: GF438II capture 50/60 cycles (50/60Hz) of each event that is detected in all modes, without set-up
Automatic transient GF438II analyzers capture 200 kHz waveform data on all phases simultaneously up to 1000V.
Fully class-A compliant: GF438II analyzers conduct tests according to the stringent international IEC 61000-4-30 class-A standard.
Mains signaling: GF438II analyzer measure interference from ripple control signals at specific frequencies.
Troubleshoot: analyze the trends using the cursors and zoom tools.
Highest safety rating in the industry: 600 V CAT IV/1000 V CAT III rated for use at the service entrance.
Measure all three phases and neutral: with included four flexible current probes with enhanced thin flex designed to fit into the tightest places.
Automatic trending: every measurement is always automatically recorded, without any set-up.
System-monitor: ten power quality parameters on one screen according to EN50160 power quality standard
Logger function: configure for any test condition with memory for up to 600 parameters at user defined intervals.
View graphs and generate reports: with included analysis software.
Battery life: up to 5 hours operating time per charge on Li-ion battery pack.
On grid / Grid-tied
Rated power: 3600W
No. of MPPT: 2
Strings per MPPT: 1
Phase: Single phase
Warranty: 10 years
Dimension(W/H/D): 355*412*153mm
Net weight: 13.5kgs
LED display
Easy Operation Beekeeping Honey Extractor Three Phase 24 Frame Electric Honey Extractor
Basic Information
Place of Origin:
Chin honey extractor
Brand Name:
supersweet honey extract
Certification:
ISO
Model Number:
sshe-02
Minimum Order Quantity:
10pcs
Packaging Details:
carton
Delivery Time:
5-8 working days
Payment Terms:
D/P, D/A, L/C, T/T, Western Union, MoneyGram
Supply Ability:
100000pcs
SILICON WAFERS are the building blocks of modern technology, they provide the substrate onto which circuits are constructed. We offer Prime, Test, Monitor, SEMI standard, and customized silicon wafers in all diameters from 2�¢?�³ to 300mm. Our Wafers meet the SEMI standards, along with customized options.
Silicon On Insulator (SOI) Wafers: Chips fabricated on SOI wafers achieve 30% faster speeds and 80% lower power demands compared to CMOS devices. The SOI structure consists of three layers: a top active device layer for transistor fabrication, a buried oxide (BOX) insulator layer, and a bottom handle wafer layer.
Silicon Float Zone Wafers: is a crystal growth technique that produces highly pure silicon wafers with fewer impurities than traditional methods.
Silicon Thermal Oxide Wafers: Has high quality silicon thermal oxide wafers in all diameters from 2�¢?�³ to 300mm.
Silicon Nitride Wafers: Has different option of film processing for your silicon needs, including LPCVD nitride.
On Insulator (SOI): Has high quality silicon thermal oxide wafers in all diameters from 2�¢?�³ to 300mm.
Fused Silica Wafers: is the amorphous phase of quartz (SiO2).
Borofloat 33 Glass Wafers: is used in a wide range of applications like micro-optics, sensors, microlithography, semiconductor engineering, lighting, medical technology.
13104 194Q 9Sy Three Phase Multifunction Power Meter Suppliers
Short on time? Let 194Q 9Sy Three Phase Multifunction Power Meter sellers contact you.
