As a synthetic polycarboxylic acid high slump retaining water reducer, it has strong ability to maintain the dispersion of cement particl s The product has good adaptability to cement and high retention rate of double bond, which greatly improves the reaction activity of the product, so as to improve the utilization rate of the product and finally reduce the production cost of water reducing agent. 1.1% F-108(22%)is added in concrete,water reducing rate is above 30%. Improving early strength&strength after 28days Compressive strength 1day 180 3days 170 7days 160 28days 150. Greatly reducing W/B ratio,shrinkage and creep,improving durability. Low slump loss,slump retention index â?¥ 190mm. Complying with ISO14001:2004 certi ation,content of chloride ion 0.1%.
Autoclaved Aerated Concrete (AAC) block is a low-maintenance precast building material with excellent thermal insulation and durability. The heat-insulating properties of AAC blocks keep the building cooler and prevent outside heat from entering, resulting in significant savings on air conditioning costs. AAC blocks also guarantee savings in foundation load, structural steel consumption, and mortar consumption. If you want to build a house while being environmentally conscious, AAC blocks are the way to go. Autoclaved Aerated Concrete (AAC) is a certified green building material that is lightweight, load-bearing, high-insulating, durable, and three times lighter than red bricks. Advantages Of AAC Blocks -Easy & Faster Workability - Disaster Resistant - Thermal Insulation And Energy Conservation - Soundproof - Sustainable And Pocket-Friendly - Fire Resistance - Moisture Proof
"For night driving safety, motorcycles, bicycles, electric bicycles, electric scooters and motorized bicycles drivers should use reflective lights in the evening hours Based on this, we have produced a specially designed, back-supported, reflective "Reflective Striped" backpack for drivers in this class. The Design and Patent of this backpack, which increases visibility thanks to the reflective strips both on the shoulder strap visible from the front and on the back, belongs to our brand. Waterproof: G1CR backpacks made of special fabric are IP65 level and dustproof. It also provides protection against low pressure water that can come from all directions. Compartments: It meets all kinds of needs with its large interval volume. Notebook compartments up to 15'6" on the inside and on the front easily accessible, zipper-protected document compartment. Dimensions: Height= 41cm / Width= 29cm / Thickness= 11cm Color: Black with green reflective strip with phosphorescent green reflector.
AP4000 - 4000 Watt Portable Generator A-IPOWER | SKU: AP4000 Features: Performance Series Engine: 223cc OHV engine with Cast Iron Sleeve & Low Oil Shutdown High Output: 4,000 starting watts - 3,000 running watts Run Time: 4 - gallon fuel tank for extended runtime of 14.5 hours at 25% load Digital Hour Meter: For quick and easy run time reading AC Outlets: Complete with standard 20A - 120V house hold (5-20R), 30A - 120V Twist lock (L5-30R) and 30A - 120V RV Outlet (TT-30R) Heavy Duty Frame Construction: Built tough with durable powder coat finish Portable Design: Easy to transport with folding handle and wheels Description
From the appearance, this chair is made of dark blue velvet fabric, giving it a noble and mysterious feeling. Its unique texture design not only adds visual layering, but also feels soft, making you feel like you are immersed in the clouds when you sit on it. The design of the chair back imitates pleats, which not only has artistic beauty, but also provides good support to ensure the correct sitting posture of the user. The four legs of this chair are made of golden metal, which is both sturdy and stylish. The combination of gold and dark blue highlights low-key luxury. Whether it is placed in the living room or study, it will become the focus.Hebei Dining Furniture Co., Ltd produces products covering various styles of dining chairs, including armchairs, side chairs, bar stools, and outdoor dining chairs, Please contact us if necessary,
MW02R is a lightweight electric folding wheelchair that can be manually opened and closed by your hands. It's composed of aluminium alloy frame and breathable faric materials, three-layer solid tires, aluminium alloy wheel hubs, 500W motors and electronic brake, etc. 20km driving distance, 11kg net weight, one-button folding function and 100kg load-carrying capacity, etc. It has one-button switching function of automatic and manual modes, its controller can be placed on left or right as per your habits, etc. MW02R is low in weight, but it is firm and durable enough due to adopting aviation aluminum alloy frame. Its dual configuration of electronic brakes and handbrakes also provides sufficient safety. It also features a high-grade breathable fabric that is easy to clean.
24V DC LED Neon Light, which is more safety, and gives a professional look to your signs. You can install it under the water, swim pool and seaside. Details of 24V Neon Flex Light 24V LED Neon Light. VOLTAGE: 24V DC (With LED Transformer). SMD2835, 120 pcs LED for one meter. CUTTING: 50CM can be cuttable. INSTALLATION: It is Flexible and waterproof for outdoor. PACKING: 50M for one roll. Benefits of 24v LED Neon Light 24V DC Low Voltage. More safety and energy-efficient. Can be used in water, a swimming pool. Long lifespan and long-lasting light. Flexibility-easy to install for any corner or very tiny place. As one of led light suppliers, we can provide kinds of led light wholesale, if you are interested, please contact us.
Chemically modified starches contain an E-number; the declaration is Modified starch. Oxidized starch (E1404) is a suitable carrier for food mixtures exhibiting low viscosities after hot preparation. Compared to native starches, acetylated cook-up starches (E1420) are characterized through lower gelatinization temperatures and an improved stability against retrogradation. Regarding heat treatment, acidic conditions and shear forces, di-starch phosphates (E1412) are stable in terms of their viscosity. Acetylated di-starch phosphates (E1414) and adipates (E1422) additionally exhibit excellent freeze-thaw stability as well as clear appearance of the final preparation. Starch sodium octenyl succinate (E1450) exhibits emulsifying properties making it perfectly suitable in the application of oil-in water applications.
Canola oil means the oil obtained from clean and sound, low erucic acid bearing seeds of rapeseed belonging to compestris, juncea or napus varieties of Brassica by the method of expression or solvent extraction and it shall be clear, free from rancidity, suspended or other foreign matter, separated water, added coloring or flavoring substances or mineral oil and shall contain not more than 2 % erucic acid (as % of total fatty acids). Refined imported rapeseed oil is the oil obtained from the above crude oil by the process of refining as per the definition given under FSSAI 2.2.1 (16) & 2.2.1 (7). It shall be clear, free from rancidity, suspended or other foreign matter, separated water, added colouring or flavoring substances or mineral oil and shall not contain not more than 2 % erucic acid. It shall conform to the following standards
FEP is a copolymer of TFE and HFP. It retains most of the desirable properties of PTFE, but the melt viscosity is low enough for conventional melt processing, and the melting point of FEP is 260 ° C, while the first melting point of PTFE is 340 ° C. The continuous operating temperature of FEP is 205â??, while that of PTFE is 260 FEP resins are available in a variety of grades to meet a variety of processing and end-use requirements. Different grades of FEP differ mainly in terms of molecular weight, but they all have the same use temperature, electrical properties, and chemical resistance. With the increase of molecular weight and melt viscosity, the mechanical properties and pressure cracking resistance also increase. However, these improvements come at the cost of processing difficulty and processing speed. Everflon offers improved grades that provide a better combination of pressure cracking resistance and processing speed
Chemical Name: N-Tertiarybutyl-2-benzothiazole sulfenamide Molecular Formula:C11H14N2S2 Molecular Weight:238.37 Quality standrad:HG/T2744-96 CAS NO:95-31-8 Properties: Gray white powder (granule). The density is 1.26-1.32. soluble in benzene, CS2, methyl alcohol, acetone. chloroform, alcohol, insoluble in gasoline, water, acid and alkali with lower concentration Application: Provides fast cure rate and high modulus development in NR, SBR, BR and blends. Normally used alone or with small quantities of ultra accelerators in tire compounds or industrial rubber products low poison and high efficiency. It is good back up for NOBS. Be regarded as standard accelerator Packaging: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag or jumbo bag Storage: The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is 1 year.
FEP tubes (polyperfluorinated ethylene propylene) are the preferred material for the production of small diameter tubes of continuous length. FEP sacrifices some heat resistance, but its chemical and dielectric properties are similar to PTFE. Tayak FEP tube is a transparent tube that is an economical choice for applications requiring chemical resistance and resistance to high and low temperature exposure. The excellent clarity of Taiyue FEP tubing makes it ideal for applications such as viewing glasses and flow monitoring. Taiyue FEP tubes have a slightly higher coefficient of friction, lower continuous use temperature, and are more transparent than PTFE. Tai Yue FEP pipes also have better gas and vapor permeability and have excellent UV transmittance ratings. FEP tubes are available in a variety of standard sizes, with custom sizes available on request. FEP tubes are also available in flexible tubes that can be ordered in a variety of size lengths, special sizes and colors to meet your needs.
Rail Maintenance Tools for Raiways Rail Bending Machine Rail Benders Hydraulic Vertical Rail Bender is used for the bending operation of railway seam lines and welded joints of seamless tracks and other low-collapsed parts of steel rails. It can also be used as vertical bending and supporting equipment in the laying of seamless tracks; suitable for all types Rails. The machine has simple structure, convenient operation, safe operation and easy maintenance. It is an effective tool for rectifying rail joint problems. PRODUCT SPECIFICATIONS Model YDT-900 Type Hydraulic Rail Bender Material Aluminium Dimensions (L x W x H) (mm) 1435*696*385 mm Max. bending force 900 KN Hydraulic system pressure 47 MPa Working stroke 120 mm Pivot point distance 1200 mm Weight 185 kg
Rail Maintenance Tools for Raiways Rail Bending Machine Rail Benders Hydraulic Vertical Rail Bender is used for the bending operation of railway seam lines and welded joints of seamless tracks and other low-collapsed parts of steel rails. It can also be used as vertical bending and supporting equipment in the laying of seamless tracks; suitable for all types Rails. The machine has simple structure, convenient operation, safe operation and easy maintenance. It is an effective tool for rectifying rail joint problems. PRODUCT SPECIFICATIONS Model YDT-900 Type Hydraulic Rail Bender Material Aluminium Dimensions (L x W x H) (mm) 1435*696*385 mm Max. bending force 900 KN Hydraulic system pressure 47 MPa Working stroke 120 mm Pivot point distance 1200 mm Weight 185 kg
Rail Maintenance Tools for Raiways Rail Bending Machine Rail Benders Hydraulic Vertical Rail Bender is used for the bending operation of railway seam lines and welded joints of seamless tracks and other low-collapsed parts of steel rails. It can also be used as vertical bending and supporting equipment in the laying of seamless tracks; suitable for all types Rails. The machine has simple structure, convenient operation, safe operation and easy maintenance. It is an effective tool for rectifying rail joint problems. PRODUCT SPECIFICATIONS Model YDT-900 Type Hydraulic Rail Bender Material Aluminium Dimensions (L x W x H) (mm) 1435*696*385 mm Max. bending force 900 KN Hydraulic system pressure 47 MPa Working stroke 120 mm Pivot point distance 1200 mm Weight 185 kg
EverFlon fluorinated lubricant powder is a soft material of low molecular weight that is applied to form a dry lubricating film under light contact pressure. When this contact pressure continues between the two mating surfaces, either of which contains EverFlon powder, the transfer of the fluoropolymer lubricant to the opposite surface occurs. This results in the formation of a micro-thin lubricating film, which has excellent anti-friction properties. EverFlon MV1 is a fragile PTFE powder that can be broken down into submicron particles by high shear mixing in a liquid medium. The degree of particle size reduction depends largely on the degree of shear. For example, mixing MV1 with a medium viscosity lubricant and then passing the mixture twice through a three-roll grinder yields a sub-micron size range, with many particles measuring 0.3 microns in size. MV1 is particularly suitable for inks added to can coatings as well as oils, greases and elastomers Medium.
ZY series turbo air classifier, developed by our company to address the issues of poor classification performance and low production yield in ordinary classifiers in China, draws on the technologies of Germany's Alpine and Hosokawa, combined with our own ZY series ultrafine mill classification technology. It is an industry-leading classifier that can be used with various types of grinding equipment. This turbo air classifier can classify particles ranging from 1.5 to 30 microns, with a maximum content of 90% for particles sized at 2 microns." Application: ZY series air classifier is widely applicable to different kinds of non-metallic ore such as heavy calcium carbonate, light calcium carbonate, talc, barium sulfate, wollastonite, pyrophyllite, dolomite mineral, graphite, kaolin, brucite, soapstone and aluminum hydroxide.
Foam Granulator Foam granulator, also known as waste foam pellet recycling machine, can produce foam pellets without destroying the original molecular structure, and the pellets produced are used for a wide range of purposes.EPS granulator is to make the final product into pellets by crushing-melting-pumping-cooling-pelletizing the waste EPS foam through the process of crushing-melting-pumping-cooling-pelletizing and so on. Advantages 1.Production automation, saving labor. 2. Perfectly adapted to a wide range of material processing systems. 3. Space saving and easy maintenance 4. Low investment cost for high quality and durable machines. 5. Provide online installation guide and other training services. 6. customized design, can be used independently or integrated with crusher and compactor into the whole system, even into the washing line
Heat Treated Flours, are used as carrier and filling material in the production of soup and sauce products. GANOS Heat treated flours, are used in powder soup and sauce products since the moisture value of the end product is important in terms of shelf life. General Features : In smell and taste of wheat flour. In powder form with increased fluidity Naturally produced from wheat flour End product moisture value can be determined (4%-6%-8%) Does not contain GMO Halal and Kosher certified Functions : Good carrier regarding to its low moisture value. Mixes well with other raw materials regarding to its increased flow rate. Has lower microbiological limits regarding to the applied heat treatment. Has a shelf life of 12 months. Regarding to the applied heat treatment, heat treated wheat flours are enzyme inactiveted and does not interact with other raw materials in shelf life.
The scope of application Applied to the partial illumination when searching,night navigation,lifesaving or water surface working for a middle-or small-ship. Products characteristic 1.The use of imported chips,lamp beads luminous flux in the 120LM /W,long life, low power consumption,color index greater than 80,light angle of 90�°; 2.The use of high thermal conductivity of aluminum alloy material, temperature rise,anodized or surface spray treatment,can enough anti- corrosion,the end cap from the aluminum alloy high-pressure die-casting, high-strength tempered glass,high transmittance, 3.The use of imported anti-aging silicone rubber raw materials,waterproof and dustproof performance tough. 4.The light is well-set,corrosive-resistant and lightweight. 5.Approval by CCS(China Classification Society),certificate number P4028.
