Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor
Automatic cylinder turnover dough mixing machine for various kind bakery food /wheaten food and so on same this kind food , During operation, the hook and hopper rotate at the same time to make the dough more uniform, the bucket can be automatically turned over and removed, and the mixing head can be lifted, which is convenient for fetching and cleaning. It is equipped with a head up emergency stop device to ensure safe use. Castors/foot-wheel are installed at the bottom for easy movement. Mixing hook ,cylinder ,safety cover all by SUS material . Parameters : 50kg/ 75kg / 100kg / 125 kg/time power 7.75-14.25kw voltage 380v/50hz 1380 * 1160 *1400mm / 1580 *1380*1560 /1650 *1500 *1630 /1680*1550*1650mm Bread dough mixing machine How to making dough Delicious bread dough
Plastic Goblets, Mugs, Water Cups, Straight Beer Pots And Clothes Racks, Garbage Cans .
Wood, pellet, chips, palm, copra, furniture, coal,coffee, tea, sugar, rice, coconut, eyelash, mesh, vco,rbd, crude, granule, charcoal, block, growbag, slab, polybag, desiccated, milk,flour, water, home, decor, husk, shell, aromatic, chemical, essential, powder, sawdust, pith,peat ,fiber, planter, coir, cube, brick, bristle, chip, cocoa, kernel, candle, spices, ginger, patchouli, nutmeg, clove, vetiver, pepper, cananga, lemongrass, citronella, cajuput, cinnamon, sandalwood, massoia,basil, rose,jasmine, cardamon, coriander, champaka, palm oil, petroleum, tamanu, plywood, agarwood, alpinia, cedar wood, chamomile, eucalyptus, eugenol, gurjum, lemon, almond, lavender, grapefruit, oil,vanilla, fennel, finger root, frangipani, frankincense, geranium, junperbery, kaffirlime,kaemferia, cubeba, fruits, vegetable, peppermint, rosemary, tangerine, turmeric,ylang, cinamate, tarragon, spearmint, rosewood, lime,wall, rattan, textile, sandal, shoe,food, beverage, soap,clothes, broom ,lamp, bucket, can.
We manufacture Brass Neutral Links according to the customer's drawings or specifications. Size: Begins from M2 or equivalent threads and up to any size Also available as per custom design or requirement Material: Free Cutting Brass IS 319 Type (I) or Free Cutting Brass As Per BS 249 Type (I) or High-Grade Free Cutting Brass Any special brass material composition as per customer's requirement Finish And Coating: Natural, Nickel Plated, Tin Plated, Natural Brass or any coating as per customer specification.
Coaster USA Flag Design / Size - L - 10 cm x W - 10 cm x Hight - 1 cm / Shape - Square Shape / Color - Red, Blue & White / Material - Wood / Price - 8 USD / Sample Available / Minimum Quantity - 50 Pcs / Packing - Inner & Master Carton Box Export Packing / We can also customize these Coaster set as per the requirements of our prestigious clients / Interested Buyer Kindly Contact US
Wooden Coaster / Size - L - 10 cm x W - 10 cm x Hight - 1 cm / Shape - Round Shape / Color - Golden & Brown / Material - Wood & Brass / Price - 8 USD / Sample Available / Minimum Quantity - 50 Pcs / Packing - Inner & Master Carton Box Export Packing / We can also customize these Coaster set as per the requirements of our prestigious clients / Interested Buyer Kindly Contact US
Bottle Stand / Size - L - 30 cm x W - 15 cm x Height - 45 cm / Shape - Rectangle Shape / Colour - Wooden / Material - Mango Wood / Price - 15 USD / Sample Available / Minimum Quantity - 100 Pcs / Packing - Inner & Master Carton Box Export Packing / We can also customize these Bottle Stand as per the requirements of our prestigious clients / Interested Buyer Kindly Contact US
Coaster with Box / Size - L - 10 cm x W - 10 cm x Hight - 1 cm / Color - Multi / Material - Mdf Board & Wood, Resin / Price - 8 USD / Sample Available / Minimum Quantity - 50 Pcs / Packing - Inner & Master Carton Box Export Packing / We can also customize these Coaster set as per the requirements of our prestigious clients / Interested Buyer Kindly Contact US
Coaster with Box / Size - L - 10 cm x W - 10 cm x Hight - 1 cm / Color - Multi / Material - Mdf Board & Wood, Resin / Price - 8 USD / Sample Available / Minimum Quantity - 50 Pcs / Packing - Inner & Master Carton Box Export Packing / We can also customize these Coaster set as per the requirements of our prestigious clients / Interested Buyer Kindly Contact US
Bone Inlay coffee Table / Size - Dia - 90 cm x Hight - 45 cm / Color - Torque & White / Material - Bone, Resin, Mdf Board / Price - 300 USD / Sample Available / Minimum Quantity - 5 Pcs / Packing - Inner & Master Carton Box Export Packing / We can also customize these Bone inlay Coffee Table as per the requirements of our prestigious clients / Interested Buyer Kindly Contact US
Bike Style Console Table for Home & Commercial Usage.
TMT Bars / Rebar which find usage in the core infrastructure development like construction of Multi Storeyed buildings, bridges, dams, railways, power plants as reinforcement material. These bars are rolled from Tested billets as per IS 2830 which ensures uniform physical and mechanical properties. The range varies from 8mm to 32mm, conforming to BIS 1786 - Fe 415 and Fe 500. Properties Units IS : 1786 Fe 415 OUR BARS IS: 1786 Fe 500 OUR BARS Yield Stress N/mm2 Min 415 450 500 530 Tensile Strength N/mm2 Min 485 510 550 580 Elongation %Min 14.5 20 12.5 18 Bend Test Up to & incl. 22 mm 3d 2d 4d 2d SIZE SPEC GR./m ISI STANDARD AKC - TMT Bars Tolerance Limit as par is Grams/m Per Wt.var. Gr./m Indv. Sample %var. Weight Tolerance Grams/m Wt. Var. Gr./m Indv. Sample %var 08mm 395 367 to 423 56 ±7 370 to 402 32 ±4 10mm 617 574 to 660 86 ±7 578 to 616 38 ±3 12mm 888 844 to 932 88 ±5 856 to 892 36 ±2 16mm 1580 1501 to 1659 158 ±5 1528 to 1592 64 ±2 20mm 2470 2396 to 2544 148 ±3 2435 to 2485 50 ±1 25mm 3850 3735 to 3965 230 ±3 3798 to 3876 78 ±1 28mm 4830 4685 to 4975 290 ±4 764 to 4860 96 ±1 32mm 6310 6121 to 6499 378 ±3 6100 to 6226 126 ±1 Advantages of - TMT Bars Correct weight as per ISI Standards. Better Fire Resistance. Higher Strength and Ductility. Better Weldability, Bendability and Bonding. Better Corrosion resistance. Ideally suited for any type of concrete structure
BarsSV Trade is a leading supplier & Exporter of different different types of Bars like Flat Bars, Bright bars, Solid Bars, according to appropriate standards as well as customer specifications in a large variety of steel grade and dimensions. Specific requirements on execution, tolerances, lengths, mechanical and corrosion properties are offered on request
SV Trade is a leading supplier & Exporter of TMT Bars, according to appropriate standards as well as customer specifications in a large variety of steel grade and dimensions. Specific requirements on execution, tolerances, lengths, mechanical and corrosion properties are offered on request
Aluminum bar 2024/5052/5083/6061/6082/7075.
We provide the Jordanian Market with high quality and durability steel rebar's, we atal moasron group excel in our priority to provide our customers with their need. We have a wide variety stock of rebar, available dimensions from 8 mm to 32 mm,grades 60,40 ASTM A615,and BS4449, lengths 4,5,6,9,and 12 meters,plain,and deformed bars .
Thermal lance also known as burning bar or thermic lance, made by hollow mild steel pipes filled with a number of iron wires, which is a powerful efficient cutting tool by high purity oxygen flow through the interior of the lance to create extraordinarily high temperature from 3,600 to 4,426�°C for cutting through just about anything. Thermal lance can be used whenever some ferrous and non-ferrous materials must be removed or cut into pieces, like sand casting riser cutting or ladle furnace tapping. When molten material is spilled, it can be allowed to solidify and then cleaned up with thermal lance. For coastal buildings, interior concrete sometimes breaks down to produce what is called concrete cancer, but thermal lance can be used to remove this degrading concrete so that replacement material can be packed in. These characteristics of the thermal lance make it a particularly efficient and cost-effective method of cutting steel and cast-iron materials too thick to be cut with a normal oxy-acetylene torch. In the case of thicker materials, during the operation, the lance tube will be consumed by the intense heat at the cut point and should be discarded once it becomes too short to be safely used.
Threaded bars High tensile and Stainless Steel Fasteners as per National, International Standard & Customer Drawings. We are manufacturer of Threaded Bars, High Tensile Threaded Bars, Stainless Steel Threaded Rod, Steel Threaded Rod, Acme Threaded Rod, Threaded Rod Ends, Threaded Rod End, Threaded Rod End Bearings, High Strength Threaded Rod, Threaded Rod Coupling, Grade 8 Threaded Rod Plai Range / Dia upto 4"- 100 mm Length upto 120" (3000 mm) Drawings / Specifications We can manufacture any type of typical Fasteners as per your drawing and specifications FINISH : The above products are available in finish like Phosphate, Black Oxide, Galvanised, Hot Dip Galvanised, Cadmium Plating. Teflon- PTFE, Powder & many more as per Customer Requirements. We can also supply fasteners according to customers drawings and specifications.
HISTORY For year’s, Bamboo has been used by man for construction activities, later it has been replaced by CTD (Cold Twisted Deformed steel rods) or TOR steel rods. The manufacturers adopted the Cold Twisting Process in which the naturally cooled rods were twisted by means of motors. Thus the molecular structure of the core steel is weakened. Thus it should not be used for construction activities. Now, the TMT (Thermo Mechanically Treated) steel bars have emerged. Description TMT Bars, Thermo mechanically treated bars are high strength deformed steel bars used in reinforced cement concrete (RCC) work manufactured with the help of advancement of technology. TMT bars are latest production in MS steel bars and have superior properties such as strength, ductility, welding ability, bending ability and highest quality standards at international level. Technical Specification Chemical Composition Constituent Percent, Maximum Fe 415 Fe 415D Fe 500 Fe 500D Fe 550 Fe 550D Fe 600 Carbon 0.30 0.25 0.30 0.25 0.30 0.25 0.30 Sulphur 0.060 0.045 0.055 0.040 0.055 0.040 0.040 Phosphorus 0.060 0.045 0.055 0.040 0.055 0.040 0.040 Sulphur & Phosphorus 0.110 0.085 0.105 0.075 0.100 0.075 Nominal Cross - Sectional Area And Mass S.No. Normal Size (mm) Cross Sectional Area (mm) Mass per meter (kg) Permissible Tolerance for individual Sample 1 8 50.3 0.395 -7% 2 10 78.6 0.617-7% 3 12 113.1 0.888 -5% 4 16 201.2 1.580 -5% 5 20 314.3 2.470 -3% 6 25 491.1 3.850 -3% 7 28 615.8 4.830 -3% 8 32 804.6 6.310 -3%