introduction of Iron Oxide Slurry Bench top Color Reader Color Tester CS-800 1).Iron Oxide Brief Introduction Pigment is a very important chemical raw material. It is widely used for painting industry, ink industry, plastic industry and other industries. It could be roughly separated into organic pigment or inorganic pigment. Iron oxide is called excellent dying organic pigment. Because of the large production quantity of iron oxide, the color quality control for the Iron Oxide becomes a very essential part. 2).Our device Comparing With Imported Instrument In the Iron Oxide production industry, most factories choose imported colorimeter from USA. The device prices are high and troublesome for the warranty. Now we have good news. After being tested, the testing result of our device is not much difference with the imported device. We have the advantage of lower price and easier maintenance. 3).How to test with our device CS-800 Bench top Color Reader Color Tester? Mix the Iron Oxide powder with printing ink to make it into slurry. And then paint it on the white paper(we will call it- sample paper). In order to keep the clean of the device, we need find the other paper and cut a hole with diameter 11mm (same with the testing port of CS-800). And then cover it on the sample paper ( the testing material should be naked) and then put it on the testing port. With this method, we will get the color difference data for the two samples. 4).Technical Data Type:CS-800 Illumination:d/8(Diffused lighting, 8 degrees observe angle)(conform to CIE No.15, ISO 7724/1, ASTM E1164, DIN 5033 Teil7, JIS Z8722 Condition c standards) Size of integrating sphere:Φ40mm,Alvan diffused reflection surface coating Illumination Light source:CLEDs(entire wavelength balanced LED light source) Sensor:dual light path sensor array Wavelength range:400-700nm Reflectivity range:0-200% Measurement light source:A,C,D50,D55,D65,D75,F1,F2,F3,F4,F5,F6,F7,F8,F9,F10,F11,F12,DLF,TL83,TL84,NBF,U30,CWF Data being displayed: reflectance value/data, sample's color values, color difference values/graph, pass/fail results, color error tendency, color simulation, display measurement area, history data color simulation, manual input standard sample, generate measurement report Measurement time:About 1 second Measurement time interval:0.5 second Measuring caliber:Φ11mm Color space:CIE-L*a*b,L*C*h,L*u*v,XYZ,Yxy,reflectivity,Hunterlab,Munsell MI,CMYK Color difference formulas:E*ab,E*CH,E*uv,E*cmc(2:1),E*cmc(1:1),E*94,E*00, Eab(Hunter),555,color classification Other colorimetric indices:WI(ASTM E313-00,ASTM E313-73,CIE/ISO,AATCC,Hunter,Taube Berger Standby),YI(ASTM D1925,ASTM E313-00,ASTM E313-73), Tint(ASTM E313,CIE,Ganz),metamerism index Milm, adhesive/changing color fastness, ISO luminance,8 gloss, A density, T density,E density, M density Repeatability:light splitting reflectivity: standard deviation within 0.08% color values:E*ab
Product Details: Brand J.Mithra Test Kit Type HBsAg Test Kit (Rapid) Detects All the 11 subtype of HBsAg Sensitivity 100% by WHO Evaluation Specificity 100% by PATH USA Evaluation Cat. No HB010100 Intended Use : Hepacard is visual, rapid, sensitive and accurate one step immunoassay for the qualitative detection of Hepatitis B surface antigen (HBsAg) in Human serum or plasma.The assay is intended to be used as an aid in the recognition and diagnosis of acute infections and chronic infectious carriers of the Hepatitis B Virus(HBV). Salient Features: Detects all the 11 subtype of HBsAg. Antigen Sensitivity- 0.5 ng/ml. No sample preparation required. See through Device for easy result interpretation. Shelf life-30 months at 2-30C. WHO Evaluated with 100% Sensitivity. Evaluations: PATH USA: Sensitivity 100% and Specificity 100% . DEPT. OF CLINICAL VIROLOGY, CMC VELLORE: Sensitivity 100% and Specificity 100% Approved By Drug Controller General Of India( DCGI) For use In Blood Banks.
Phosphoric Acid Food Grade 85% And 75%, Phosphoric Acid Tech Grade 85% And 75%, Boric Acid Powder 99%, Dmf 99%, Dmso 99%, Titanium Dioxide , Sulphur Elemental (powder /lump) 99%, Sodium Sulphate Non-anhyrans, Flakes, Calcium Chloride Dihydrate, Sodium Sulphate Anhydrous Cmc Food Grade And Tech Grade, Mono Ethylene Glycol (meg), Polyethylene Glycol (peg), Zinc Ash, Zinc Sulphate Monohydrate 33%, 27%, 21%, Xanthan Gum, Edta Fe 6%, Edta Acid , Pvc Rais, Pvc Resin (emulsin Type), Pvc Resin (supension Type), Hpmc, Hydrogen Peroxide 25%, 35%, 50%, Sles 70%, Caustic Soda Flakes And Pearls, Oxalic Acid, Citric Acid Monohydrate, Anhydrous Citric Acid, Homopolymer Polypropylene (pp), Paste Pvc Resin, Pvc Resin Sg-5, Thiourea, STPP, SODIUM HYDROSULFIDE, LABSA, Many Other Products In Agricultural, Pharmaceutical, Chemical & Rubber industry. With best regards.
Categories Beauty Care + Advanced Wound Dressing - Foam Dressing Silicone Foam Wound Dressing Hydrocolloid Dressing Alginate Dressings Silver Ionic Wound Dressing Super Absorbent Wound Dressing Hydrogel Wound Dressing Others General Wound Dressing + Colostomy Care + Related products Hydrocolloid Wound Dressing for Heel for Diabetic Foot Ulcer Medical Hydrocolloid Wound Dressing Pads for Skin Tear for Abrasion Large Hydrocolloid Wound Dressing for Open Wounds for Bed Sores Hydrocolloid DressingHome/Advanced Wound Dressing/Hydrocolloid Dressing Moist Hydrocolloid Wound Dressing for Arterial Ulcers PrevNext Moist Hydrocolloid Wound Dressing for Arterial Ulcers Hydrocolloid Wound Dressing Film Backing / Foam Backing Normal Thickness / Ultra Thin Adhesive Sterile Request Quote Description Product Code & Size Technical Data FAQ Product Introduction Hydrocolloid Wound Dressing is an elastomeric dressing and composed of medical pressure sensitive adhesive, carboxy methyl cellulose (CMC) particles, etc. It is designed to help maintain a moist wound environment. Benefits Provide a moist environment which allows body enzymes to help heal Impermeable to bacteria and other contamination Do not stick to the wound Flexible to mold around skin and body motions
Packing Deduction Used 0.7mm Galvanized Steel Strips Length : Can be cut as your requests Thickness:0.2mm-5.0mm Width:20mm-950mm Delivery time Within 30 days by container, and within 50 days by bulk cargo ship Payment term T/T OR L/C Application 1): Can be used in many fields such as building, automobile, shipbuilding, petrochemical, machinery, medicine, food, electric power, energy, space, building and decoration, etc. 2): Can be made into mould template, mortise pin, column 3): This kind of steel have good mechanical property, is widely used in structural parts which may support stress alternation, especially made into some connecting rods, bolts, wheel gearâ?¦ 4): This kind of steel is the most common blanks and materials of shaft parts.Its die welding material model is CMC-E45. Package 1. by bundles, each bundle weight under 3 tons, for small outer diameter round bar,each bundle with 4 â?? 8 steel strips. 2. 20 feet container contains dimension, length under 6000mm 3. 40 feet container contains dimension, length under 12000mm 4. By bulk vessel, Freight charge is low by bulk cargo, and large heavy sizes can not be loaded into containers can shipping by bulk cargo
galvanized steel strips in coil Black Steel Metal Length : Can be cut as your requests Thickness:0.2mm-5.0mm Width:20mm-950mm Delivery time Within 30 days by container, and within 50 days by bulk cargo ship Payment term T/T OR L/C Application 1): Can be used in many fields such as building, automobile, shipbuilding, petrochemical, machinery, medicine, food, electric power, energy, space, building and decoration, etc. 2): Can be made into mould template, mortise pin, column 3): This kind of steel have good mechanical property, is widely used in structural parts which may support stress alternation, especially made into some connecting rods, bolts, wheel gearâ?¦ 4): This kind of steel is the most common blanks and materials of shaft parts.Its die welding material model is CMC-E45. Package 1. by bundles, each bundle weight under 3 tons, for small outer diameter round bar,each bundle with 4 â?? 8 steel strips. 2. 20 feet container contains dimension, length under 6000mm 3. 40 feet container contains dimension, length under 12000mm 4. By bulk vessel, Freight charge is low by bulk cargo, and large heavy sizes can not be loaded into containers can shipping by bulk cargo
Dear Sir Greetings and good day to you. We would like to take the opportunity to introduce to you our company and services. We, New Force International Fze, wholesale traders of Genuine spare parts (OE parts) based in Jebel Ali Freezone, Dubai. We can cater to your Ex-stock & Indent Orders. We are strategically located in the Freezone with our own facilities and infrastructure to handle your logistics requirements end to end, like Sea / Air / Courier and Land shipments. We specialize in dealing with original equipment parts and our product range includes. ï?? Nissan, Subaru, Mazda. ï?? Infinity ï?? Renault â?? Passenger Car Parts ï?? Citroen ï?? CMC We hope to nurture this opportunity into a profitable venture that mutually benefits us. We request to send us your requirements to move forward.
1). Kneading machine does very well in mixing, kneading, crushing and dispersing for high-viscosity liquid materials, with no dead point. 2). Two sigma or Z-type blades. 3). Equipped with inverter for frequency control. 4). Vacuum and high pressure are available. 5). The cylinder is opened hydraulically. 6). Discharge mode: Hydraulic tilting, Bottom pumping,or Screwing. 7). With jacket outside of the cylinder, for heating or cooling. 8). Heating mode: Hot oil, Electric or Steam 9). All the parts that contact with material are made of stainless steel. 10). Widely used in high viscosity sealant, silicone rubber, CMC, adhesive, also used in batteries, ink, pigments, dyes, pharmaceuticals, resins, plastics, rubber, cosmetics ect. crusher rubber tire recycling machine
SODIUM MONOCHLORO ACETATE (SMCA) (C2H2ClNaO2) is the sodium salt of Monochloroacetic Acid (MCA). Sodium Monochloro Acetate (SMCA) is obtaining from neutralization of Monochloroacetic Acid (MCA) with Sodium Carbonate (Soda Ash). Another method of manufacturing Sodium Monochloro Acetate (SMCA) is spraying molten Monochloroacetic Acid (MCA) together with 50 % Caustic Soda solution into a spray dryer. IUPAC NAME: Sodium 2-chloroacetate. CAS REGISTRY NUMBER: 3926-62-3 EC NUMBER: 223-498-3 UN NUMBER: 2659 CHEMICAL FORMULA: C2H2ClNaO2 APPLICATIONS Sodium Monochloro Acetate (SMCA) is use in the production of a wide variety of useful compounds such as drugs, dyes, agrochemicals and thickening agents. Most reactions take advantage of the high reactivity of the CCl bond. Applications are in Manufacturing of 1) Various Agrochemicals viz 2,4-D (2,4-dichlorophenoxyacetic acid), 2,4,5-T (2,4,5-trichlorophenoxyacetic acid), MCPA (2-methyl-4-chlorophenoxyacetic acid), Glyphosate and Dimethoate. 2) Drugs such as Vitamins, Synthetic Caffeine, Malonates, Glycine, Barbiturates etc 3) Amphoteric Surfactants which used in shampoos, baby and children cleansing formulations, shower and bath gels, body and facial washes and shaving foam, also in skin care products like cleansing milks or eye-make up removers. 4) Glycolic acid (Hydroxyacetic Acid), Thioglycolic Acid and Cyanoacetic Acid. 5) Textile Auxiliaries & Dyestuffs (Indigo) 6) Hydrocolloids such as Sodium Carboxy Methyl Cellulose (CMC), Sodium Carboxy Methyl Starch (CMS), Sodium Carboxy Methyl Tamarind (CMT), Sodium Carboxy Methyl Guar Gum (CMG). PACKING 25Kg or 50 Kg HDPE Bags with inner LDPE liner.
1-Potasium Sorbate 2-Xanthan gum food grade 3-Tri Sodium Citrate TTCA or Cofcco 4-Soya Yuwang 5-Craam tar tar 6-Maltodextrine 7-Mono Glycerid 8-Agar agar 9-Citric Acid 10-CMC 11-Ammonium Bicarbonate Food Grade 12-DL-Malic Acid 13-Glycerol Monostearate 14-Lactic Acid Food Grade 15-Sodium Benzoate 16-Sodium Metabisulphite 17-Monosodium Glutamate 18-Ascorbic Acid Faith(at.)Mondstar(.).
Phosphoric acid food grade 85% and 75%, phosphoric acid tech grade 85% and 75%, boric acid powder 99%, dmf 99%, dmso 99%, titanium dioxide, sulphur elemental (powder /lump) 99%, sodium sulphate non anhyrans flakes, calcium chloride dihydrate, sodium sulphate anhydrous, cmc food grade and tech grade, mono ethylene glycol (meg), polyethylene glycol (peg), zinc ash, zinc sulphate mono hydrate 33%, 27%, 21%, xanthan gum, edta fe 6%, edta acid, pvc rais, pvc resin (emulsin type), pvc resin (supension type), hpmc, hydrogen peroxide 25%, 35%, 50%, sles 70%, caustic soda flakes and pearls, oxalic acid, citric acid monohydrate, anhydrous citric acid, homopolymer polypropylene (pp), paste pvc resin, pvc resin sg 5, thiourea, stpp, sodium hydrosulfide, labsa, potassium hydroxide 99% (flaks), potassium carbonate 99%, sop 50%, 53%, MOP, MAP, ammonium sulphate, ammonium sulphate caprolatum grade, dap, urea 46%, npk 20 20 20.FOB, CFR, CNF, and CIF.
Sodium bicarbonate baking soda  sodium carbonate soda ash sodium chloride various types of salts  sodium propionate  sodium carboxymethyl cellulose cmc  sodium acid pyrophosphate sapp  tetrasodium pyrophosphate  trisodium citrate  monosodium glutamate  dicalcium phosphate  propylene glycol  potassium hydroxide  xanthan gum guar gum powder baking powder  sorbitol solution  soya lecithin  distilled monoglyceride  dextrose anhydrous dextrose monohydrate  ascorbic acid  lactic acid  phosphoric acid  potassium sorbate  maltodextrin  glycerine  glycine  ammonium bicarbonate  calcium propionate calcium chloride caustic soda flakes barite tomato paste .
Zinc oxide, zirconium silicate, china clay, china clay powder, ball clay, feldspar powder(body), feldspar powder(glaze), feldspar chips, quartz powder(body), quartz powder(glaze), plaster of paris (ta 70, ta 60, ta 50, 75 & 90), talcum powder, dolomite, barium carbonate, sodium bentonite, sodium chloride, cobalt chloride, calcium carbonate(ind), calcium carbonate(food), soda ash light, caustic soda, sodium hydroxide, potassium hydroxide, sodium silicate, potash soap, iron red oxide, iron black oxide, cmc, jailin, colour( ceramic & resin).
[Intended Usage] This kit is used for the in vitro qualitative detection of suspected cases of pneumonia caused by New Coronavirus infection, patients with suspected clusters, other patients who need to be diagnosed or differentially diagnosed with the New Coronavirus infection, and nasopharyngeal swabs, oropharyngeal swabs, and bronchoalveolar lavage fluid samples of patients with mutation beads for the New Coronavirus ORF1ab and N gene, S gene N501Y mutation and S gene E484K mutation sites. [Storage Conditions & Validity] 1. The kit should be stored frozen at -20 and protected from light; the expiration date is 6 months; the production date and expiration date are shown in the outer packaging box. 2. Avoid repeated freezing and thawing of the kit and the number of freezing and thawing shall not exceed 7 times. 3. After opening, the bottles should be stored at -20 and protected from light. The number of bottles opening times should not exceed 7 times, which will not affect the use within the validity period. [Applicable Instruments] 1. This kit has been validated on ABI7500 quantitative fluorescence PCR instrument. 2. For other models not listed, relevant experiments have not been performed or completed for this kit. If users need to use this type of instrument platform to carry out the detection of this reagent, please contact our Technical Department at for relevant support. NB: The other devices can include quantitative fluorescence PCR platforms with FAM, VIC, ROX and Cy5 channels. [Sample Requirements] 1. Nasopharyngeal swabs, oropharyngeal swabs and other methods are used to obtain samples, and it is recommended to use commercial virus sampling kits for sample collection devices. [Test Results Interpretation] 1. Negative and positive controls should be tested in each experiment and the test result can be determined only when the controls meet the quality control requirements. 2. When FAM, VIC and ROX channels are positive, Cy5 channel result may be negative due to the system competition. 3. When the internal standard result is negative, if the FAM, VIC and ROX signals of the test sample are also negative, the test result of the sample is invalid, and the cause should be found and eliminated, and the experiment repeated for this sample. [Product Performance Index] 1. Precision: The coefficient of variation Intra-batch / Inter-batch, Intra-day / Inter-day among different operators shall not be higher than 5.0%. 2. Coincidence rate of negative positive controls: The coincidence rate of positive controls and negative controls is 100%. 3. Minimum detection limit: The minimum detection limit of this kit is 500 copies/mL. [CE Mark Registration No.]: RPS/499/2021. [EC REP.]: CMC MEDICAL DEVICES & DRUGS S.L. C/ Horacio Lengo n18, C.P 29006, Milaga, Spain.
Our Best Products: COE 54, COE 32, COE 36, CDBS Isobutanol 70/B, Nonionic Surfactant N 15 and other Many EMULSIFIERS. Many Other Products In Agricultural, Pharmaceutical, chemical & Rubber industry. With best regards
We Have different fertilizers: POTASSIUM HYDROXIDE 99% (FLAKS), Potassium Carbonate 99%, Sop 50%, 53%, Mop, Map, Ammonium Sulphate, Ammonium Sulphate Caprolatum Grade, DAP, UREA 46%, NPK 20-20-20 and many Others. Many Other Products In Agricultural, Pharmaceutical, Chemical & Rubber industry. With best regards.
Our products are: Admol 20 - Dispursing agent for DF/WDG, Admol 21 - Dispersing agent for WP, Admol 4488 - For SC formulation, Admol 2700 - WDG formulation, Admol 7000 - wetting agent, Admol 4000 - wetting Agent, Admol 4480 - FOr SE formulation, other Many EMULSIFIERS. Many Other Products In Agricultural, Pharmaceutical, chemical & Rubber industry. With best regards
Tomato paste with a Brix value of 36-38 is a thick, concentrated paste made from fresh tomatoes without any additives or preservatives. It is available in different grades, including cold break, hot break, and aseptic. Cold break tomato paste is produced by heating the tomatoes to a lower temperature than hot break tomato paste, which helps preserve the natural flavor and color of the tomatoes. Tomato paste is used in a wide range of applications. It is used as a base for pizza and pasta sauces, soups, and stews. It is also used in the production of ketchup, barbecue sauce, and other condiments. Tomato paste is used in the food industry as a natural coloring agent and flavor enhancer. It is also used in the cosmetic industry as a natural ingredient in skin care products. The Brix value of tomato paste is a measure of its sugar content. A higher Brix value indicates a higher sugar content and a thicker consistency. Tomato paste with a Brix value of 36-38 is considered a medium-thick paste that is suitable for a wide range of applications.
Caustic soda flakes, also known as sodium hydroxide flakes, are white, odorless, and highly soluble in water. They are available in different grades, including diaphragm, rayon, membrane, and purified diaphragm. Caustic soda flakes are used in a wide range of applications. They are used in the pulp and paper industry to break down lignin and produce cellulose fibers. Caustic soda flakes are also used in the textile industry to process cotton and dye fabrics. They are used in the production of soaps and detergents to neutralize acids and adjust pH levels. Caustic soda flakes are used in the food industry to process cocoa and chocolate, and to remove skins from fruits and vegetables. They are also used in the petroleum industry to refine crude oil and remove sulfur compounds. Caustic soda flakes are used in the production of aluminum, which is used in the automotive and aerospace industries. They are also used in the production of biodiesel, which is a renewable fuel source.
Calcium chloride is a white, odorless powder that is highly soluble in water. It is available in different concentrations, including 78% and 94%. Calcium chloride is widely used in the petrochemical industry to remove water from hydrocarbons and dry materials such as ethane, butane, propane, and diesel fuels. It is also used as a desiccant to absorb moisture from the surrounding air in various industrial processes. Calcium chloride is used to prevent ice formation and de-ice roads, highways, and sidewalks. It is also used in the food industry as a firming agent, flavor enhancer, and preservative. Calcium chloride is used in the production of cheese and tofu to improve the texture and firmness of the final product. It is also used in the manufacture of cement and concrete to accelerate the setting time. Calcium chloride is used in the mining industry to extract metals such as gold and silver from their ores. It is also used in the paper industry to improve the strength and quality of paper products.
