Applicable industries: Model industry (construction models, aviation and navigation models and wooden toys), advertising, decoration, arts and crafts, electronics, and electric appliances, etc. Applicable materials: Non-metal material such as acryl, wood planks (light planks), bamboo ware, double color sheets, paper, leather, shells, coconut shells, ox horns, resin animal grease, abs boards, lamp shade, etc. Modellp-c1610 Working area160cm*100cm/63in*39in Equipment dimension210cm*141cm*107cm/ 83in*56in*42in (l*w*h) Laser power80w (100w optional) Laser typeco2 sealed laser tube, water-cooled, 10.6um Cooling typewater cooling Engraving speed0-70000mm/min Cutting speed0-40000mm/min Communication interfaceusb Laser output control1-100% software setting Smallest character engravingenglish 1.0mm*1.0mm Locating precisionâ?¤â±0.01mm Highest scanning precision2500dpi Operating temperature0 - 45c Power supply220v/50hz , 110v/60hz Graphic format supportedbmp, plt, dst, dxf, ai Software supportedartcut, photoshop (conversion output) Coreldraw, autocad, lasercut (direct output) Work table honeycomb sucking table or knife slat working table Driving system3 phase stepper motor Net weight390kgs Gross weight480kgs Spare parts recommend (r): laser tube(r), lens(r), mirror(r) Optional parts: 1. Motorized up and down table 2. Water chiller 3. Rotary tool with rollers/rotary tool with clips 4. Red dot positioner 5. Auto focus 6. Ccd device optional
Model industry (construction models, aviation and navigation models and wooden toys), advertising, decoration, arts and crafts, electronics, and electric appliances, etc. Applicable materials: Non-metal material such as acryl, wood planks (light planks), bamboo ware, double color sheets, paper, leather, shells, coconut shells, ox horns, resin animal grease, abs boards, lamp shade, etc. Modellp-c1490 Working area140cm*90cm / 55in*35in Equipment dimension175cm*131cm*107cm/69in*52in*42in (l*w*h) Laser power60w/80w/100w optional Laser typeco2 sealed laser tube, water-cooled, 10.6um Engraving speed0-70000mm/min Cutting speed0-40000mm/min Laser output control1-100% software setting Communication interfaceusb Smallest character engravingenglish 1.0mm*1.0mm Locating precision¤â±0.01mm Highest scanning precision2500dpi Operating temperature0 - 45c Cooling typewater cooling Power supply220v/50hz , 110v/60hz Graphic format supportedbmp, plt, dst, dxf, ai Software supportedcoreldraw, photoshop, autocad, tajima Driving system3 phase stepper motor Net weight360kg Gross weight440kgs Package size2060mmx1410mmx1200mm/81in*55.5in*47.2in Spare parts recommend (r): laser tube(r), lens(r), mirror(r) Optional parts: 1.Work table 2.Water chiller 3.Rotary tool with rollers/rotary tool with clips 4.Red dot positioner 5.Auto focus
The 150TPD modern auto rice mill line include the vibration cleaner, de-stoner, pneumatic rice husker, paddy separator, rice whiteners, silky polisher, rice grader, rice color sorter, auto packing scale, feeding elevators, magnetic separator, control cabinet, collecting bins, dust-collection system and accessories. The storage silos and grain dryer are also optional. The 150t/day modern auto rice mill line includes the following main machines: 1 unit TQLZ200 Vibrating Cleaner 1 unit TQSX168 Destoner 2 units MLGQ36C Pneumatic Rice Huskers 1 unit MGCZ60 20 2 Double Body Paddy Separator 3 units MNMLS46 Vertical Rice Whiteners 2 units MJP150 4 Rice Graders 2 units MPGW22 2 Water Polishers 2 units FM7-C Rice Color Sorter 1 unit DCS-50S Packing Scale with Double Feeding Hoppers 3 units W15 Low Speed Bucket Elevators 15 units W10 Low Speed Bucket Elevators 1 set Control Cabinet 1 set dust/husk/bran collection system and installation materials Capacity: 6-6.5t/h Power Required: 544.1KW Overall Dimensions(L W H): 40000 15000 10000mm The optional machines for 150t/d modern auto rice mill line: Thickness grader, Length Grader, Rice Husk Hammer Mill, Bags type dust collector or Pulse dust collector, Magnetic separator, Flow Scale, The features of 150t/day modern auto rice mill line: 1. This rice processing line can be used to process both long-grain rice and short-grain rice(round rice), suitable to produce both white rice and parboiled rice, high output rate, low broken rate; 2. Use vertical type rice whiteners, high yield bring you high profit; 3. Two water polishers and rice graders will bring you more shining and higher precision rice; 4. The pneumatic rice hullers with auto feeding and adjustment on rubber rollers, higher automation, more easy to operate. 5. Usually use bag type dust collector to collect in high efficiency the dust, impurities, husk and bran during processing, bring you good working environmental; The pulse dust collector is optional; 6. Having high automation degree and realizing continuous automatic operation from paddy feeding to finished rice packing.
Construction waste & demolition sorting system Construction waste & demolition sorting system convenient and quick to achieve the construction waste disposal. After the screening of the construction waste through a specific iron removal equipment to remove the iron material contained in the coarse and medium crushing, fine crushing equipment and processing, processed into a certain size of the recycled aggregate, and finally applied to the road stone Burning brick, cement blends and so on. Applications of Construction waste & demolition sorting system: Crushing and screening for concrete fragments, asphalt pieces, bricks, stones, wood, plastic, gypsum and mortar, steel and nonmetallic. Input products: the mixture of construction waste,which is composed of road concrete blocks, asphalt concrete blocks, old building blocks, building site waste, etc. Output products: Iron, steel, impurities, plastic and different sizes of stones and bricks. All sieving materials are finally used for roadbed stone, unburned bricks, cement admixtures and so on. Capacity: 100 tons per ho ur to 800 tons per hour. Machine pictures and processing chart of Construction waste & demolition sorting system: Process Description of Construction waste & demolition sorting system: The raw material of the construction waste is crushed through the feeder into the crusher, and the material after the crushing is sent by the belt (the iron is transported at the same time as the belt conveyor). The sieving station is sieved through the screening station. Four materials are 0-5mm, 5-10mm, 10-15mm,> 15mm(According to customer needs can change),Which 10-15mm, >15mm material in the material before the light material handling,> 31.5mm of the material from the new break into the closed loop. WCW-800 List of Construction waste & demolition sorting system: Number Model Name Quantity 1 ZSL-80 Drying to mud screening system 1 2 FXJ-800 Light material selection system 1 3 GTS-800 Roller sieve 1 4 PP1315 Impact Crusher 4 5 2 # dust removal system 1 6 1 # dust removal system 1 7 RCVD-15 Separator 2 8 PE1215 Jaw Crusher 1 9 ZSW1560 Vibration feeder 1 10 3YK3073 Circular vibrating screen 2
Construction waste & demolition sorting system Construction waste & demolition sorting system convenient and quick to achieve the construction waste disposal. After the screening of the construction waste through a specific iron removal equipment to remove the iron material contained in the coarse and medium crushing, fine crushing equipment and processing, processed into a certain size of the recycled aggregate, and finally applied to the road stone Burning brick, cement blends and so on. Applications of Construction waste & demolition sorting system: Crushing and screening for concrete fragments, asphalt pieces, bricks, stones, wood, plastic, gypsum and mortar, steel and nonmetallic. Input products: the mixture of construction waste,which is composed of road concrete blocks, asphalt concrete blocks, old building blocks, building site waste, etc. Output products: Iron, steel, impurities, plastic and different sizes of stones and bricks. All sieving materials are finally used for roadbed stone, unburned bricks, cement admixtures and so on. Capacity: 100 tons per ho ur to 800 tons per hour. Machine pictures and processing chart of Construction waste & demolition sorting system: Process Description of Construction waste & demolition sorting system: The raw material of the construction waste is crushed through the feeder into the crusher, and the material after the crushing is sent by the belt (the iron is transported at the same time as the belt conveyor). The sieving station is sieved through the screening station. Four materials are 0-5mm, 5-10mm, 10-15mm,> 15mm(According to customer needs can change),Which 10-15mm, >15mm material in the material before the light material handling,> 31.5mm of the material from the new break into the closed loop. WCW-800 List of Construction waste & demolition sorting system: Number Model Name Quantity 1 ZSL-80 Drying to mud screening system 1 2 FXJ-800 Light material selection system 1 3 GTS-800 Roller sieve 1 4 PP1315 Impact Crusher 4 5 2 # dust removal system 1 6 1 # dust removal system 1 7 RCVD-15 Separator 2 8 PE1215 Jaw Crusher 1 9 ZSW1560 Vibration feeder 1 10 3YK3073 Circular vibrating screen 2
Construction waste & demolition sorting system Construction waste & demolition sorting system convenient and quick to achieve the construction waste disposal. After the screening of the construction waste through a specific iron removal equipment to remove the iron material contained in the coarse and medium crushing, fine crushing equipment and processing, processed into a certain size of the recycled aggregate, and finally applied to the road stone Burning brick, cement blends and so on. Applications of Construction waste & demolition sorting system: Crushing and screening for concrete fragments, asphalt pieces, bricks, stones, wood, plastic, gypsum and mortar, steel and nonmetallic. Input products: the mixture of construction waste,which is composed of road concrete blocks, asphalt concrete blocks, old building blocks, building site waste, etc. Output products: Iron, steel, impurities, plastic and different sizes of stones and bricks. All sieving materials are finally used for roadbed stone, unburned bricks, cement admixtures and so on. Capacity: 100 tons per ho ur to 800 tons per hour. Machine pictures and processing chart of Construction waste & demolition sorting system: Process Description of Construction waste & demolition sorting system: The raw material of the construction waste is crushed through the feeder into the crusher, and the material after the crushing is sent by the belt (the iron is transported at the same time as the belt conveyor). The sieving station is sieved through the screening station. Four materials are 0-5mm, 5-10mm, 10-15mm,> 15mm(According to customer needs can change),Which 10-15mm, >15mm material in the material before the light material handling,> 31.5mm of the material from the new break into the closed loop. WCW-800 List of Construction waste & demolition sorting system: Number Model Name Quantity 1 ZSL-80 Drying to mud screening system 1 2 FXJ-800 Light material selection system 1 3 GTS-800 Roller sieve 1 4 PP1315 Impact Crusher 4 5 2 # dust removal system 1 6 1 # dust removal system 1 7 RCVD-15 Separator 2 8 PE1215 Jaw Crusher 1 9 ZSW1560 Vibration feeder 1 10 3YK3073 Circular vibrating screen 2
Construction waste & demolition sorting system Construction waste & demolition sorting system convenient and quick to achieve the construction waste disposal. After the screening of the construction waste through a specific iron removal equipment to remove the iron material contained in the coarse and medium crushing, fine crushing equipment and processing, processed into a certain size of the recycled aggregate, and finally applied to the road stone Burning brick, cement blends and so on. Applications of Construction waste & demolition sorting system: Crushing and screening for concrete fragments, asphalt pieces, bricks, stones, wood, plastic, gypsum and mortar, steel and nonmetallic. Input products: the mixture of construction waste,which is composed of road concrete blocks, asphalt concrete blocks, old building blocks, building site waste, etc. Output products: Iron, steel, impurities, plastic and different sizes of stones and bricks. All sieving materials are finally used for roadbed stone, unburned bricks, cement admixtures and so on. Capacity: 100 tons per ho ur to 800 tons per hour. Machine pictures and processing chart of Construction waste & demolition sorting system: Process Description of Construction waste & demolition sorting system: The raw material of the construction waste is crushed through the feeder into the crusher, and the material after the crushing is sent by the belt (the iron is transported at the same time as the belt conveyor). The sieving station is sieved through the screening station. Four materials are 0-5mm, 5-10mm, 10-15mm,> 15mm(According to customer needs can change),Which 10-15mm, >15mm material in the material before the light material handling,> 31.5mm of the material from the new break into the closed loop. WCW-800 List of Construction waste & demolition sorting system: Number Model Name Quantity 1 ZSL-80 Drying to mud screening system 1 2 FXJ-800 Light material selection system 1 3 GTS-800 Roller sieve 1 4 PP1315 Impact Crusher 4 5 2 # dust removal system 1 6 1 # dust removal system 1 7 RCVD-15 Separator 2 8 PE1215 Jaw Crusher 1 9 ZSW1560 Vibration feeder 1 10 3YK3073 Circular vibrating screen 2
Construction waste & demolition sorting system Construction waste & demolition sorting system convenient and quick to achieve the construction waste disposal. After the screening of the construction waste through a specific iron removal equipment to remove the iron material contained in the coarse and medium crushing, fine crushing equipment and processing, processed into a certain size of the recycled aggregate, and finally applied to the road stone Burning brick, cement blends and so on. Applications of Construction waste & demolition sorting system: Crushing and screening for concrete fragments, asphalt pieces, bricks, stones, wood, plastic, gypsum and mortar, steel and nonmetallic. Input products: the mixture of construction waste,which is composed of road concrete blocks, asphalt concrete blocks, old building blocks, building site waste, etc. Output products: Iron, steel, impurities, plastic and different sizes of stones and bricks. All sieving materials are finally used for roadbed stone, unburned bricks, cement admixtures and so on. Capacity: 100 tons per ho ur to 800 tons per hour. Machine pictures and processing chart of Construction waste & demolition sorting system: Process Description of Construction waste & demolition sorting system: The raw material of the construction waste is crushed through the feeder into the crusher, and the material after the crushing is sent by the belt (the iron is transported at the same time as the belt conveyor). The sieving station is sieved through the screening station. Four materials are 0-5mm, 5-10mm, 10-15mm,> 15mm(According to customer needs can change),Which 10-15mm, >15mm material in the material before the light material handling,> 31.5mm of the material from the new break into the closed loop. WCW-800 List of Construction waste & demolition sorting system: Number Model Name Quantity 1 ZSL-80 Drying to mud screening system 1 2 FXJ-800 Light material selection system 1 3 GTS-800 Roller sieve 1 4 PP1315 Impact Crusher 4 5 2 # dust removal system 1 6 1 # dust removal system 1 7 RCVD-15 Separator 2 8 PE1215 Jaw Crusher 1 9 ZSW1560 Vibration feeder 1 10 3YK3073 Circular vibrating screen 2
Description & Specifications of quoted machine-standard single vibrating head: X working size 1600mm, if with double heads such as creasing wheel or other tools, working size will be 1500mm-1550mm, if with camera and spindle, machine working width will be about 1300-1400mm Y working size 2500mm Z working size 10mm max Cutting head cnc oscillating knife cutting head Display way English LED touch screen Machine table Aluminum bellow Suction Table with 9 suction zone Data transfer way Intel Vacuum pump 9KW air type vacuum pump Driving system Taiwan delta servo driver and motor Control system RD control system Guiding system Taiwan TBI square rail Tool sensor With, red dot Transmission Y rack pinion, XZ synchronous steel belt Cutting speed 30m/min Traveling speed 50m/min Weight About 600kgs Size 2250*3300*1650mm Power 380V 50HZ Software vcutworks, machine has this software, support dxf, plt format file Features: High speed: Only need 80 seconds to finish one set of car foot mat., only need 6 minutes to finish one set of car cushion mattress High efficiency: don't need any die mold, or die mold cutting machine, this machine can press mark, cutting and molding on soft material such as leather, carton etc. Save much labor and cost. Low cost: one machine can do design, cutting instead of manual design and cutting, save labor, and material wastage cost. Wide application: This machine can cut leather, PU, fiber, EVA, XPE, sponge cladding, composite cladding, Sponge+drape+composite leather, PVC foot mat, paper, carton, plastic board etc. Soft material. Good performance: adopt Taiwan TBI ball screw or Wuxi High precision rack pinion, low noise, accurate transmission. Long lifespan and high precision. Cnc oscillating knife cutting machine Application: Sofa, seat, car seat cover, automobile floor mat, automotive carpet, luggage, handbags industries, applied to the shoe industry, clothing industry, composite materials, luggage industry, automobile industry, advertising printing industry, electronics industry, decoration industry, furniture industry and so on
Tobee G/GH Sand Gravel Pumps are designed specifically for continuous pumping of extremely aggressive slurries, gavels, and sands. with a wide particle size distribution. Capable of handling large particles at consistently high efficiencies results in low cost of ownership. The large volume internal profile of the casing reduces associated velocities further increasing component life. Design Features: The unique segmented clamp ring on larger size units and solid on smaller pumps, facilitates casing rotation to any angle, reducing the need for costly high wearing bends. Minimal maintenance is required. Impeller expulsion vanes reduce gland pressure and intrusion of high concentrations of solids in the gland area. Efficiency is maintained by minimining suction side recirculation. Specially designed and shaped impeller vanes allow the handling of extraordinarily large particles. The unique casing design and sealing vanes prevent abrasive solids intrusion at the sealing faces. The large, robust casing has been designed to reduce internal velocities resulting in minimum efficiency loss and improved casing wear life. The casing is made up of three components to reduce maintenance time and costs associated with a onepiece design. (Except the 6/4 DG which has two components) Tobee heavy-duty grease lubricated taper roller bearing assemblies are fitted as standard. A rigid large diameter shaft with reduced overhang minimises deflection and vibration under all conditions ensuring trouble free operation. Unusually high service factors enable the assembly to carry all radial and axial thrusts. A unique -10 (dash 10) end cover assembly comprising of V-seals, double piston rings and an external flinger with grease lubricated labyrinths are standard with all warman pumps
Sand Gravel Pumps are designed specifically for continuous pumping of extremely aggressive slurries, gavels, and sands. with a wide particle size distribution. Capable of handling large particles at consistently high efficiencies results in low cost of ownership. The large volume internal profile of the casing reduces associated velocities further increasing component life. Design Features: The unique segmented clamp ring on larger size units and solid on smaller pumps, facilitates casing rotation to any angle, reducing the need for costly high wearing bends. Minimal maintenance is required. Impeller expulsion vanes reduce gland pressure and intrusion of high concentrations of solids in the gland area. Efficiency is maintained by minimining suction side recirculation. Specially designed and shaped impeller vanes allow the handling of extraordinarily large particles. The unique casing design and sealing vanes prevent abrasive solids intrusion at the sealing faces. The large, robust casing has been designed to reduce internal velocities resulting in minimum efficiency loss and improved casing wear life. The casing is made up of three components to reduce maintenance time and costs associated with a onepiece design. (Except the 6/4 DG which has two components) heavy-duty grease lubricated taper roller bearing assemblies are fitted as standard. A rigid large diameter shaft with reduced overhang minimises deflection and vibration under all conditions ensuring trouble free operation. Unusually high service factors enable the assembly to carry all radial and axial thrusts. A unique -10 (dash 10) end cover assembly comprising of V-seals, double piston rings and an external flinger with grease lubricated labyrinths are standard with all warman pumps
10x8S-G Gravel Pumps are the most comprehensive range of centrifugal gravel sand pumps for use in mining, chemical and general industry applications. The horizontal sand gravel pumps are designed for heavy duty applications such as mining, power sector,dredging river,and tailings as well as specialty applications, which are used for continuous pumping of high abrasive, high density sand and gravels. 10x8S-G Gravel Pump Wear Parts Design: Impeller: Front and back shroud expulsion vanes reduce gland pressure and intrusion of high concentrations of solids in the gland area. Efficiency is maintained by minimizing suction side recirculation. Specially designed and shaped impeller vanes allow the handling of extraordinarily large particles. The unique casing design and sealing vanes prevent abrasive solids intrusion at the sealing faces. Casing: Robust casing has been designed to reduce internal velocities resulting in minimum efficiency loss and improved casing wear life. The casing is made up of three components to reduce maintenance time and costs associated with a one piece design. Expeller (Centrifugal Seal): no external sealing water required where applicable. Stuffing Box: flushed gland sealing with braided packing and a lantern ring. Bearing Assembly: Tobee heavy-duty grease lubricated taper roller bearing assemblies are fitted as standard. A rigid large diameter shaft with reduced overhang minimises deflection and vibration under all conditions ensuring trouble free operation. Unusually high service factors enable the assembly to carry all radial and axial thrusts.
Tobee 18x16TU-G Gravel Pump is designed for continuous handling of the most difficult higher abrasive slurries, containing solids too large to be pumped by a standard slurry pump, The 18x16 gravel pump is widely used for Sand Excavation, Coal Washery, Power Plant, Mineral Processing Plants, Other industries. Design Features: The unique segmented clamp ring on larger size units and solid on smaller pumps, facilitates casing rotation to any angle, reducing the need for costly high wearing bends. Minimal maintenance is required. Impeller expulsion vanes reduce gland pressure and intrusion of high concentrations of solids in the gland area. Efficiency is maintained by minimising suction side recirculation. Specially designed and shaped impeller vanes allow the handling of extraordinarily large particles. The unique casing design and sealing vanes prevent abrasive solids intrusion at the sealing faces. The large, robust casing has been designed to reduce internal velocities resulting in minimum efficiency loss and improved casing wear life. The casing is made up of three components to reduce maintenance time and costs associated with a one piece design. Tobee heavy-duty grease lubricated taper roller bearing assemblies are fitted as standard. A rigid large diameter shaft with reduced overhang minimises deflection and vibration under all conditions ensuring trouble free operation. Unusually high service factors enable the assembly to carry all radial and axial thrusts.
Rapeseed oil/canola seeds oil process and rapeseed oil refining equipment (keywords: canola oil production, canola oil plant, canola oil processing, how canola oil is made, canola oil production line, extracting canola oil, canola oil production line, canola oil mill, canola oil mill project), preparation of rapeseed oil use pre-pressing - leaching process mostly. Operation points: Rapeseed raw materials using vibrating screen or flat rotary screen screening impurity removal. As rapeseed contains more "side by side mud", also need to use vertical circular screen to the side of the mud to break, sieve out and remove with suction. After cleaning the rapeseed impurities should be less than 0.5%. The newly harvested rapeseed generally do not need to soften, but low water content of rapeseed to be used in softened layer of water in 9%, temperature 50-60 under softening conditions 12min. Then the use of vertical rolling mill or roller mill to roll the rapeseed into a 0.35mm thickness of the embryo, rapeseed into the rolling mill before the need to use the permanent magnet drum to remove the material contained in the iron. Rapeseed raw embryo by auxiliary steaming wok and pressing steamed frying pan after steaming into the pre-pressing machine mature embryo moisture content of 4-5%, temperature 110 . The pre-squeezed oil is filtered and pre-extracted rapeseed oil is sent for refining. The pre-pressed cake was sent to the leaching plant for leaching. The solvent ratio was 1: (0.8-1). The mixed oil was pretreated, evaporated and stripped to obtain refined rapeseed oil. Leaching wet meal using high-layer steaming machine or vertical high-layer of steam stripping off, the rapeseed meal.
Casting parts are widely used in industries of hardware and mechano-electronic, and gradually gain the popularity in the area of building, equipment, engineering machinery, machine tool, shipping, aerospace, automobile, electronics, computer, electrical appliance, lamp and lantern. Materials: Grey & Ductile (SG) Iron; Carbon, Alloy and Stainless Steel; Aluminum, Brass and Bronze Alloy, etc. Weights and dimensions: grams to tons; millimeters to meters. Casting Techniques: Clay Sand Casting; Resin Sand Casting; Precoated Sand Casting; Shell Casting; Foam-lost Casting; Sodium Silicate Casting; Silica Sol Casting; Low-pressure Casting. Order Quantity: Small, Medium or Large series Production Equipments: Line-frequency coreless induction furnace; Roller sand mixer; Core shooter; Air plasma cutting machine; Vibration polishing machine; Low pressure casting machine; Molding machine; Hook type airless shot blasting machine; Rubber apron type airless shot blasting machine; etc. Quality Control: Chemical analysis; Optical spectrum instrument; Mechanical properties for tensile strength, yield stress and elongation; Hardness testing; Impact testing; Leakage testing; Coordinate measuring machine (CMM); Metallographic analysis; Magnetic flaw detector; Ultrasonic flaw detector; etc. Surface Treatment: Shot blasting; Tumbling; Polishing; Passivation; Hot Dipped Galvanization; Electro Galvanization; Powder Coating; Painting; Vitrifying; etc.
What is Grape destemmer and Crusher Machine: Grape destemmer and crusher machine is an specialized equipment to process fresh grape clusters for wineries.It is designed to separate stem from grapes cluster, crush grapes, deliver grape pulp and so on.This destemmer crusher machine is usually connected with vibration sorting machine and grape fermentation. It is one of the critical devices for the whole grape wine processing line . Characteristic of Grape Destemmer and Crusher Machine: 1. Adopts single screw conveyor to delivery grape pulp. 2. This machine can achieve quantitatively feeding by adjusting the rate of screw motor. 3. Capacity of accommodating rotate speed of barrel roll with grapes varieties. 4. Quick-open crushing device is easy to operate. Crush roller is made of non-toxic, high-elastic rubber, no harming to grapes pulp. Specification of Standard Grape Destemmer And Crusher Machine: GDC001: Capacity:5-6 t/h Feeding & Stemming Motor Power: 1.5 kw Crushing Power: 0.75 kw Screw Conveyor Power: 3 kw Weight: 578 kg Dimension: 1816*710*1352 mm GDC002: Capacity:7-10 t/h Feeding & Stemming Motor Power: 2.2 kw Crushing Power: 1.1 kw Screw Conveyor Power: 5.5 kw Weight: 765 kg Dimension: 2240*864*1574 mm GDC003: Capacity:15-20 t/h Feeding & Stemming Motor Power: 3 kw Crushing Power: 1.1 kw Screw Conveyor Power: 7.5 kw Weight: 935 kg Dimension: 2590×910×1620 mm GDC004: Capacity: 25-30 t/h Feeding & Stemming Motor Power: 4 kw Crushing Power: 1.5 kw Screw Conveyor Power: 15 kw Weight: 1025 kg Dimension: 2740×1040×1780 mm GDC005: Capacity: 45-50 t/h Feeding & Stemming Motor Power: 7.5 kw Crushing Power: 3.0 kw Screw Conveyor Power: 15 kw Weight: 1400 kg Dimension: 3200×1100×1900 mm HIWANT Group:
Aluminum-plastic panel recycling equipment/ aluminum-plastic separator Aluminum-plastic plate recycling (separation of aluminum-plastic plate, aluminum-plastic pipe ) : not only is the technology used for various polyethylene aluminum-plastic plate , poly chlorine aluminum-plastic plate, aluminum-plastic pipe, aluminum-plastic bottle cap, automobile decorations, but it is used for cooper-plastic materials such as various of wires and cables and so on . The materials is sent to the large crusher directly by hook machine, then pass though secondary crushing, tertiary grinding powder decomposition and vibrating screen.The material decomposed are separated into plastic and metal in one time by the six -roller electric separator.It is a technology with low cost and high efficiency and recovery rate can reach 99.8%. It adopts physical method , namely , dry method separation , which doesn’t involve the heating, fire, water and other chemical raw materials, therefore no pollution will be produced. Our company has four patents in the process, patent number: 200810141172.5, 200810141174.4, 200820148814 and 200910249968.7 x. Production line features: 1?the machine can separate directly for the following materials :for the whole piece of aluminum-plastic sheet, width is less than 180 cm, thickness is less than 14 mm, for the various of lumps , diameter less is than180 cm. 2?all production lines are mechanical automation operation, only need to 1-2 people, reducing the consumption of human resources. 3?there are many feeding bins in the production line, if one part of them breakdown, it does not affect other parts run normally. 4?this production line is used widely for different conductivity compounds of metal and nonmetal, they are all separated with exchanging screen meshes and adjusting all parts of equipment. 5?production line installation is convenient with a variety of assembly method, can adapt to different venues. Aluminum-plastic panel recycling equipment/ aluminum-plastic separator
The 240 ton/day complete rice processing plant is designed to produce high quality refined rice. From paddy cleaning to rice packing, the operation is completely automatic controlled. Meticulously tested on various quality parameters under the guidance of our experienced professionals, this large scale complete rice processing line is recognized for its reliable performance, less maintenance, longer service life and enhanced durability. We can also design the milling line according to different requirements of different users.We can consider to use vertical type rice whitener or horizontal type rice whitener, normal manual type husker or pneumatic automatic husker, different quantity on silky polisher, rice grader, color sorter, packing machine, etc., as well as suction type or clothes bag type or pulse type dust collection system, simple one-storey structure or multi-storey type structure. You may contact with us and advise your detailed requirements so we can design the plant for you according to your requests. The 240t/day complete rice processing plant includes the following main machines: 1 unit TCQY125 pre-cleaner 1 unit TQLZ250 Vibrating Cleaner 1 unit TQSX180 2 Destoner 1 unit Flow scale 2 units MLGQ51C Pneumatic Rice Huskers 1 unit MGCZ80 20 2 Double Body Paddy Separator 2 units MNSW30F Rice Whiteners 3 units MNSW25 2 Rice Whiteners(double roller) 2 units MJP103 8 Rice Graders 3 units MPGW22 2 Water Polishers 3 units FM10-C Rice Color Sorter 1 unit MDJY71 3 Length grader 2 unit DCS-25 Packing Scales 5 units W20 Low Speed Bucket Elevators 20 units W15 Low Speed Bucket Elevators 5 units Bags type dust collector or Pulse dust collector 1 set Control Cabinet 1 set dust/husk/bran collection system and installation materials Etc.. Capacity: 10t/h Power Required: 870.5KW Overall Dimensions(LÃ??WÃ??H): 60000Ã??20000Ã??12000mm The features of 240t/day complete rice processing plant: 1. This rice processing line can be used to process both long-grain rice and short-grain rice(round rice), suitable to produce both white rice and parboiled rice, high output rate, low broken rate; 2. Both vertical type rice whiteners and horizontal type rice whiteners are available; 3. Multiple water polishers, color sorters and rice graders will bring you high precision rice; 4. The pneumatic rice huskers with auto feeding and adjustment on rubber rollers, higher automation, more easy to operate. 5. Usually use pulse type dust collector to collect in high efficiency the dust, impurities, husk and bran during processing, provide you dust-free workshop; 6. Having high automation degree and realizing continuous automatic operation from paddy feeding to finished rice packing.
Duplex Filter assembly SYLA-2 Spare parts with COO/COM is specializing in the production and supply of spare parts of power plant steam turbine, generators, can provide from customized parts to finished factory product. The company regards scientific management, continuous improvement, quality excellence, customer needs as the quality of the enterprise policy, and in 2008 passed the ISO9001 quality system certification. can offer many spare parts for power plants as below: DF-Duplex Filter assembly SYLA-2-DF Hydraulic oil filter RFA-250 20FC hydraulic oil filter remover WU-A25 50S excavator filter element SH-006 Generator End Cap Hydrogen Sealing Sealant T20-75 Filter element SFBX-160 5 transformer oil filter machine 400LD225K5 Solenoid Valve JT4WEB6D-62/EW220NZ5L globe control valve KHWJ25F1.6P Countersunk head bolt MG33.11.12.99 chemical filter cartridge FBX (TZ)-630 30 pressure hose S100-AC-FA-0150 Gas turbine seal oil vacuum pump reducer M02225.0BMCC1D1.5A transformer oil filter machine EH0160D010BN3HC Heater for Bolt Expansion ZJ-16-230(R) pressure hose SMS-12/20-1219mm-C SHAFT VIBRATION PROBE TM301-A02-B00-C0-D00-E00-F00 hydraulic return filter PGLX-679 pressure hose SMS-15/20-610mm-C oil suction filter HX-630*10W Gas turbine bolt heating rod ZJ-20-T1R filter element cartridge HC8314FCZ39H High pressure piston pump PVH074R01AB10A2500AE01 compression bolt 20MG30.11.08.92BZ Hydraulic Filter SKX-250 30 300MW turbine AC lube pump volute 125LY-35-4 cover plate CVC-16-A excavator filter element AX3E301-01D10V/F low pressure switch RC778NZ090ZSS oil filter wrench NLX-100 1 EH oil HP accumulator bladder NXQ A-40/31.5-L-EH Roller frame 20MG40.11.09.98 filter hydraulic oil 21FC5121-110 25/20 pressure hose SMS-10/20-1829mm-C linear displacement sensor TD-1 0-500 hydraulic spin on return line filter Q3U-E630 3FS Epoxy Potting Adhesive J0792 Duplex Filter assembly SYLA-2 solenoid valve breville HQ16.16Z-2 filter housing cartridge WU-H630 50FS Hydraulic relief valve SBSG-03-1NP-3-R-W220-20 DFYL-2022-10-28-MY
Features The Digger Compaction Wheel, is designed for easy compaction of dirt back into the trench. MONDE's Compaction Wheels are designed to deliver optimal performance through quicker compaction more particularly in trenches. They deliver exceptional compaction on the toughest terrains, under the harshest conditions, while lasting longer, using less fuel and minimising operational costs. Compaction Wheels are designed to reinstate material to its original condition after remedial work has been carried out or pipes have been laid. Apart from different designs of wheels for various applications, there are some interesting designs of pads, some efficient, and some unfortunate. The ideal design are pads that are tapered from the flat surface to the back where they are welded to the wheel or roller so that they do not the compacted material as they roll over the surface. Packing 1. We pack the products by simple pallet or case which is seaworthy. 2. Fast delivery time: 5-7 days for small quantity, and 20-30 days for container quantity. 3. We have a team specialized in packing and loading container, they have rich experience, and can load the max quantity products, which can help customer save the ocean freight. Company Shandong Mingde Machinery co., Ltd produce many kinds of excavator attachments such as: buckets, ripper, boom & arm, grapple, quick coupler, hydraulic shear, hydraulic clamp, hydraulic vibration hammer, hydraulic crusher, milling machine, screener, strength boom & arm, tamping bucket, bulldozer shovel, bulldozer push beam, bulldozer ripper, loader bucket, loader timer grapple, show shovel etc. We have many kinds of top quality attachments products to fit all type of excavators, bulldozers and loaders. Also, we have our own import/export company, our products are exported to all over the world, based on our quality and the best after-service. In the year 2011, Shandong Mingde Machinery Co,Ltd has set up joint venture with a HongKong Investment Co. Ltd namely Shandong Mingde Gangcheng Machinery Co.,Ltd with WMS brand. Now our company has two brand names and so we will try our best to develop the international market in future.
